From: bugzilla-daemon@bugzilla.kernel.org
To: linux-scsi@vger.kernel.org
Subject: [Bug 43213] New: sata_svw failed to kdump with pending IOs
Date: Mon, 7 May 2012 04:05:02 GMT [thread overview]
Message-ID: <bug-43213-11613@https.bugzilla.kernel.org/> (raw)
https://bugzilla.kernel.org/show_bug.cgi?id=43213
Summary: sata_svw failed to kdump with pending IOs
Product: SCSI Drivers
Version: 2.5
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Other
AssignedTo: scsi_drivers-other@kernel-bugs.osdl.org
ReportedBy: caiqian@redhat.com
Regression: No
After running IO-intensive workloads in the normal kernel, manually
triggering kdump ends up hanging below. Kernel version - 3.2.7.
# stress --cpu 8 --io 4 --vm 2 --hdd 1
# echo c >/proc/sysrq-trigger
[ 1294.535701] SysRq : Trigger a crash
[ 1294.536016] BUG: unable to handle kernel NULL pointer dereference at
\
(null) [ 1294.536016] IP: [] sysrq_handle_crash+0x16/0x20
[ 1294.536016] PGD 23741d067 PUD 23741c067 PMD 0
[ 1294.536016] Oops: 0002 [#1] SMP
[ 1294.536016] CPU 0
[ 1294.536016] Modules linked in: lockd amd64_edac_mod joydev edac_core tg3
e100 mii \
serio_raw edac_mce_amd k8temp shpchp i2c_piix4 sunrpc ata_generic pata_acpi
sata_svw \
pata_serverworks radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core [last
unloaded: \
scsi_wait_scan] [ 1294.536016]
[ 1294.536016] Pid: 1115, comm: bash Not tainted 3.2.7-1.fc16.x86_64 #1 empty \
empty/Tyan Transport GT24-B3992 [ 1294.536016] RIP: 0010:[] [] \
sysrq_handle_crash+0x16/0x20 [ 1294.536016] RSP: 0018:ffff88023792de38 EFLAGS:
\
00010092 [ 1294.536016] RAX: 0000000000000010 RBX: 0000000000000063 RCX: \
0000000000002721 [ 1294.536016] RDX: 0000000000000000 RSI: 0000000000000046
RDI: \
0000000000000063 [ 1294.536016] RBP: ffff88023792de38 R08: 0000000000000000
R09: \
0000000000000100 [ 1294.536016] R10: 0000000000000000 R11: 0000000000000001
R12: \
ffffffff81a75220 [ 1294.536016] R13: 0000000000000286 R14: 0000000000000007
R15: \
0000000000000000 [ 1294.536016] FS: 00007f4afd42c700(0000)
GS:ffff88013bc00000(0000) \
knlGS:0000000000000000 [ 1294.536016] CS: 0010 DS: 0000 ES: 0000 CR0: \
0000000080050033 [ 1294.536016] CR2: 0000000000000000 CR3: 000000023740b000
CR4: \
00000000000006f0 [ 1294.536016] DR0: 0000000000000000 DR1: 0000000000000000
DR2: \
0000000000000000 [ 1294.536016] DR3: 0000000000000000 DR6: 00000000ffff0ff0
DR7: \
0000000000000400 [ 1294.536016] Process bash (pid: 1115, threadinfo
ffff88023792c000, \
task ffff880234085c80) [ 1294.536016] Stack:
[ 1294.536016] ffff88023792de78 ffffffff81363151 ffff8801372dc200
0000000000000002
[ 1294.536016] ffff880236e09400 00007f4afd435000 0000000000000002
fffffffffffffffb
[ 1294.536016] ffff88023792dea8 ffffffff8136320a 0000000000000002
00007f4afd435000
[ 1294.536016] Call Trace:
[ 1294.536016] [] __handle_sysrq+0x121/0x190
[ 1294.536016] [] write_sysrq_trigger+0x4a/0x50
[ 1294.536016] [] proc_reg_write+0x7a/0xb0
[ 1294.536016] [] vfs_write+0xb3/0x180
[ 1294.536016] [] sys_write+0x4a/0x90
[ 1294.536016] [] system_call_fastpath+0x16/0x1b
[ 1294.536016] Code: d0 88 81 23 39 da 81 5d c3 66 66 66 2e 0f 1f 84 00 00 00
00 00 \
55 48 89 e5 66 66 66 66 90 c7 05 31 62 95 00 01 00 00 00 0f ae f8 04 25 00 00
00 00 \
01 5d c3 55 48 89 e5 53 48 83 ec 08 66 66 [ 1294.536016] RIP [] \
sysrq_handle_crash+0x16/0x20 [ 1294.536016] RSP
[ 1294.536016] CR2: 0000000000000000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.7-1.fc16.x86_64 \
(mockbuild@x86-05.phx2.fedoraproject.org) (gcc version 4.6.2 20111027 (Red Hat
\
4.6.2-1) (GCC) ) #1 SMP Tue Feb 21 01:40:47 UTC 2012 [ 0.000000] Command
line: \
BOOT_IMAGE=/vmlinuz-3.2.7-1.fc16.x86_64 root=/dev/mapper/vg_tyangt2413-lv_root
ro \
rd.lvm.lv=vg_tyangt2413/lv_swap rd.dm=0 rd.lvm.lv=vg_tyangt2413/lv_root
KEYTABLE=us \
SYSFONT=latarcyrheb-sun16 rd.md=0 rd.luks=0 LANG=en_US.UTF-8
console=ttyS0,115200 \
irqpoll nr_cpus=1 reset_devices cgroup_disable=memory mce=off memmap=exactmap
\
memmap=573K@64K memmap=130479K@754237K elfcorehdr=884716K memmap=64K$0K \
memmap=3K$637K memmap=128K$896K memmap=56K#3145664K memmap=8K#3145720K \
memmap=12K$4173824K memmap=4K$4175872K [ 0.000000] BIOS-provided physical
RAM map:
[ 0.000000] BIOS-e820: 0000000000000100 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfffe000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfffe000 - 00000000c0000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec03000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
[ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] user-defined physical RAM map:
[ 0.000000] user: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] user: 0000000000010000 - 000000000009f400 (usable)
[ 0.000000] user: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] user: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] user: 000000002e08f400 - 0000000035ffb000 (usable)
[ 0.000000] user: 00000000bfff0000 - 00000000c0000000 (ACPI data)
[ 0.000000] user: 00000000fec00000 - 00000000fec03000 (reserved)
[ 0.000000] user: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x35ffb max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-0000000035ffb000
[ 0.000000] RAMDISK: 35baf000 - 35fef000
[ 0.000000] ACPI: RSDP 00000000000f7a10 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bfff0100 0004C (v01 A M I OEMXSDT 09000622
MSFT \
00000097) [ 0.000000] ACPI: FACP 00000000bfff0290 000F4 (v03 A M I OEMFACP
\
09000622 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bfff0410 037E2 (v01
0AAAA \
0AAAA000 00000000 INTL 02002026) [ 0.000000] ACPI: FACS 00000000bfffe000
00040
[ 0.000000] ACPI: APIC 00000000bfff0390 00080 (v01 A M I OEMAPIC 09000622
MSFT \
00000097) [ 0.000000] ACPI: OEMB 00000000bfffe040 00056 (v01 A M I AMI_OEM
\
09000622 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000bfff3c00 00110 (v01
AMD \
HAMMER 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 00000000bfff3d10
004F0 \
(v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] SRAT: PXM 0 -> APIC
0x00 \
-> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x02 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x03 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-c0000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-140000000
[ 0.000000] SRAT: Node 1 PXM 1 140000000-240000000
[ 0.000000] NUMA: Node 0 [0,a0000) + [100000,35ffb000) -> [0,35ffb000)
[ 0.000000] Initmem setup node 0 0000000000000000-0000000035ffb000
[ 0.000000] NODE_DATA [0000000035b9b000 - 0000000035baefff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x0002e090 -> 0x00035ffb
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1
\
ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 2/0x2
\
ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 3/0x3
\
ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-15
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[16])
[ 0.000000] IOAPIC[1]: apic_id 5, version 17, address 0xfec01000, GSI 16-31
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec02000] gsi_base[32])
[ 0.000000] IOAPIC[2]: apic_id 6, version 17, address 0xfec02000, GSI 32-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] 4 Processors exceeds NR_CPUS limit of 1
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000000100000 -
000000002e090000
[ 0.000000] Allocating PCI resources starting at 35ffb000 (gap:
35ffb000:89ff5000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 \
nr_node_ids:2 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880035800000
s83072 \
r8192 d23424 u2097152 [ 0.000000] Built 1 zonelists in Node order, mobility
\
grouping on. Total pages: 29300 [ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.7-1.fc16.x86_64 \
root=/dev/mapper/vg_tyangt2413-lv_root ro rd.lvm.lv=vg_tyangt2413/lv_swap
rd.dm=0 \
rd.lvm.lv=vg_tyangt2413/lv_root KEYTABLE=us SYSFONT=latarcyrheb-sun16 rd.md=0 \
rd.luks=0 LANG=en_US.UTF-8 console=ttyS0,115200 irqpoll nr_cpus=1 reset_devices
\
cgroup_disable=memory mce=off memmap=exactmap memmap=573K@64K
memmap=130479K@754237K \
elfcorehdr=884716K memmap=64K$0K memmap=3K$637K memmap=128K$896K
memmap=56K#3145664K \
memmap=8K#3145720K memmap=12K$4173824K memmap=4K$4175872K [ 0.000000]
Misrouted \
IRQ fixup and polling support enabled [ 0.000000] This may significantly
impact \
system performance [ 0.000000] Disabling memory control group subsystem
[ 0.000000] PID hash table entries: 512 (order: 0, 4096 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ c0000000 size 128 MB
[ 0.000000] Node 1: aperture @ c0000000 size 128 MB
[ 0.000000] Memory: 106200k/884716k available (6075k kernel code, 753668k
absent, \
24848k reserved, 5014k data, 1596k init) [ 0.000000] SLUB: Genslabs=15, \
HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=2 [ 0.000000]
Hierarchical RCU \
implementation. [ 0.000000] RCU dyntick-idle grace-period
acceleration is \
enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:256 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Spurious LAPIC timer interrupt on cpu 0
[ 0.000000] do_IRQ: 0.89 No irq handler for vector (irq -1)
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2592.989 MHz processor.
[ 0.002002] Calibrating delay loop (skipped), value calculated using timer \
frequency.. 5185.97 BogoMIPS (lpj=2592989) [ 0.004005] pid_max: default:
32768 \
minimum: 301 [ 0.005025] Security Framework initialized
[ 0.006011] SELinux: Initializing.
[ 0.007077] Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.008080] Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.009044] Mount-cache hash table entries: 256
[ 0.011008] Initializing cgroup subsys cpuacct
[ 0.012007] Initializing cgroup subsys memory
[ 0.013016] Initializing cgroup subsys devices
[ 0.014004] Initializing cgroup subsys freezer
[ 0.015004] Initializing cgroup subsys net_cls
[ 0.016004] Initializing cgroup subsys blkio
[ 0.017008] Initializing cgroup subsys perf_event
[ 0.018044] CPU: Physical Processor ID: 0
[ 0.019004] CPU: Processor Core ID: 0
[ 0.020004] using AMD E400 aware idle routine
[ 0.021030] SMP alternatives: switching to UP code
[ 0.027727] Freeing SMP alternatives: 24k freed
[ 0.028012] ACPI: Core revision 20110623
[ 0.031337] ftrace: allocating 22803 entries in 90 pages
[ 0.033969] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.044041] CPU0: Dual-Core AMD Opteron(tm) Processor 8218 stepping 02
[ 0.047996] Performance Events: Broken BIOS detected, complain to your
hardware \
vendor. [ 0.048997] [Firmware Bug]: the BIOS has corrupted hw-PMU resources
(MSR \
c0010000 is 530076) [ 0.049997] AMD PMU driver.
[ 0.050998] ... version: 0
[ 0.051996] ... bit width: 48
[ 0.052996] ... generic registers: 4
[ 0.053996] ... value mask: 0000ffffffffffff
[ 0.054996] ... max period: 00007fffffffffff
[ 0.055996] ... fixed-purpose events: 0
[ 0.056996] ... event mask: 000000000000000f
[ 0.058181] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.059021] Brought up 1 CPUs
[ 0.059997] Total of 1 processors activated (5185.97 BogoMIPS).
[ 0.062613] devtmpfs: initialized
[ 0.064780] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.065031] RTC time: 0:46:05, date: 02/27/12
[ 0.066026] NET: Registered protocol family 16
[ 0.067075] TOM: 00000000c0000000 aka 3072M
[ 0.068002] TOM2: 0000000240000000 aka 9216M
[ 0.069081] ACPI: bus type pci registered
[ 0.070051] PCI: Using configuration type 1 for base access
[ 0.072696] bio: create slab at 0
[ 0.073056] ACPI: Added _OSI(Module Device)
[ 0.073995] ACPI: Added _OSI(Processor Device)
[ 0.075000] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.075995] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.078776] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.081662] ACPI Warning: Incorrect checksum in table [OEMB] - 0x50, should
be \
0x4D (20110623/tbutils-314) [ 0.084128] ACPI: Interpreter enabled
[ 0.084996] ACPI: (supports S0 S1 S4 S5)
[ 0.086995] ACPI: Using IOAPIC for interrupt routing
[ 0.093230] ACPI: No dock devices found.
[ 0.093994] HEST: Table not found.
[ 0.094995] PCI: Ignoring host bridge windows from ACPI; if necessary, use \
"pci=use_crs" and report a bug [ 0.096050] ACPI: PCI Root Bridge [PCI0]
(domain \
0000 [bus 00-ff]) [ 0.097171] pci 0000:00:01.0: Enabling HT MSI Mapping
[ 0.099898] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[ 0.100043] pci 0000:01:0d.0: PCI bridge to [bus 02-02]
[ 0.101035] pci 0000:00:06.0: PCI bridge to [bus 03-03]
[ 0.102161] pci 0000:00:07.0: PCI bridge to [bus 04-04]
[ 0.103013] pci 0000:00:08.0: PCI bridge to [bus 05-05]
[ 0.104008] pci 0000:00:09.0: PCI bridge to [bus 06-06]
[ 0.105007] pci 0000:00:0a.0: PCI bridge to [bus 07-07]
[ 0.106007] pci 0000:00:0b.0: PCI bridge to [bus 08-08]
[ 0.107249] pci0000:00: Unable to request _OSC control (_OSC support mask:
0x1e)
[ 0.113660] ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 9 11 12 14 15) *0,
\
disabled. [ 0.117220] ACPI: PCI Interrupt Link [LN01] (IRQs 1 3 4 5 6 7 9 11
12 14 \
15) *0, disabled. [ 0.122217] ACPI: PCI Interrupt Link [LN02] (IRQs 1 3 4 5
6 7 9 \
11 12 14 15) *0, disabled. [ 0.127999] ACPI: PCI Interrupt Link [LN03] (IRQs
1 3 4 \
5 6 7 9 11 12 14 15) *0, disabled. [ 0.133220] ACPI: PCI Interrupt Link
[LN04] \
(IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 0.138021] ACPI: PCI
Interrupt \
Link [LN05] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 0.143219] ACPI:
PCI \
Interrupt Link [LN06] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [
0.148210] \
ACPI: PCI Interrupt Link [LN07] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ \
0.153217] ACPI: PCI Interrupt Link [LN08] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
\
disabled. [ 0.158211] ACPI: PCI Interrupt Link [LN09] (IRQs 1 3 4 5 6 7 9 11
12 14 \
15) *0, disabled. [ 0.164005] ACPI: PCI Interrupt Link [LN10] (IRQs 1 3 4 5
6 7 9 \
11 12 14 15) *0, disabled. [ 0.169213] ACPI: PCI Interrupt Link [LN11] (IRQs
1 3 4 \
5 6 7 9 11 12 14 15) *0, disabled. [ 0.174017] ACPI: PCI Interrupt Link
[LN12] \
(IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 0.179214] ACPI: PCI
Interrupt \
Link [LN13] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 0.184213] ACPI:
PCI \
Interrupt Link [LN14] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [
0.189213] \
ACPI: PCI Interrupt Link [LN15] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ \
0.194212] ACPI: PCI Interrupt Link [LN16] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
\
disabled. [ 0.199014] ACPI: PCI Interrupt Link [LN17] (IRQs 1 3 4 5 6 7 9 11
12 14 \
15) *0, disabled. [ 0.204211] ACPI: PCI Interrupt Link [LN18] (IRQs 1 3 4 5
6 7 9 \
11 12 14 15) *0, disabled. [ 0.209207] ACPI: PCI Interrupt Link [LN19] (IRQs
1 3 4 \
5 6 7 9 11 12 14 15) *0, disabled. [ 0.214209] ACPI: PCI Interrupt Link
[LN20] \
(IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 0.219201] ACPI: PCI
Interrupt \
Link [LN21] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 0.224208] ACPI:
PCI \
Interrupt Link [LN22] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [
0.229202] \
ACPI: PCI Interrupt Link [LN23] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ \
0.234009] ACPI: PCI Interrupt Link [LN24] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
\
disabled. [ 0.239206] ACPI: PCI Interrupt Link [LN25] (IRQs 1 3 4 5 6 7 9 11
12 14 \
15) *0, disabled. [ 0.244202] ACPI: PCI Interrupt Link [LN26] (IRQs 1 3 4 5
6 7 9 \
11 12 14 15) *0, disabled. [ 0.249204] ACPI: PCI Interrupt Link [LN27] (IRQs
1 3 4 \
5 6 7 9 11 12 14 15) *0, disabled. [ 0.254204] ACPI: PCI Interrupt Link
[LN28] \
(IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 0.260005] ACPI: PCI
Interrupt \
Link [LN29] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [ 0.265202] ACPI:
PCI \
Interrupt Link [LN30] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0, disabled. [
0.270015] \
ACPI: PCI Interrupt Link [LNUS] (IRQs *10) [ 0.272304] ACPI: PCI Interrupt
Link \
[LNSA] (IRQs *11) [ 0.274364] vgaarb: device added: \
PCI:0000:00:0c.0,decodes=io+mem,owns=io+mem,locks=none [ 0.274972] vgaarb:
loaded
[ 0.275968] vgaarb: bridge control possible 0000:00:0c.0
[ 0.277039] SCSI subsystem initialized
[ 0.278081] usbcore: registered new interface driver usbfs
[ 0.278983] usbcore: registered new interface driver hub
[ 0.279991] usbcore: registered new device driver usb
[ 0.281021] PCI: Using ACPI for IRQ routing
[ 0.283040] NetLabel: Initializing
[ 0.283967] NetLabel: domain hash size = 128
[ 0.284967] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.285978] NetLabel: unlabeled traffic allowed by default
[ 0.294202] pnp: PnP ACPI init
[ 0.294983] ACPI: bus type pnp registered
[ 0.297373] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.297967] system 00:07: [io 0x0c00-0x0c01] has been reserved
[ 0.298966] system 00:07: [io 0x0cd6-0x0cd7] has been reserved
[ 0.299965] system 00:07: [io 0x0cd4-0x0cd5] has been reserved
[ 0.300965] system 00:07: [io 0x0cd8-0x0cdf] has been reserved
[ 0.301965] system 00:07: [io 0x040b] has been reserved
[ 0.302965] system 00:07: [io 0x04d6] has been reserved
[ 0.303965] system 00:07: [io 0x0c06-0x0c07] has been reserved
[ 0.304965] system 00:07: [io 0x0c14] has been reserved
[ 0.305964] system 00:07: [io 0x0c49] has been reserved
[ 0.306964] system 00:07: [io 0x0c4a] has been reserved
[ 0.307964] system 00:07: [io 0x0c50-0x0c51] has been reserved
[ 0.308964] system 00:07: [io 0x0c52] has been reserved
[ 0.309964] system 00:07: [io 0x0c6c] has been reserved
[ 0.310964] system 00:07: [io 0x0c6f] has been reserved
[ 0.311964] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.313103] system 00:08: [io 0x0580-0x058f] has been reserved
[ 0.313964] system 00:08: [io 0x0590-0x0593] has been reserved
[ 0.314963] system 00:08: [io 0x0700-0x0703] has been reserved
[ 0.315963] system 00:08: [io 0x0ca0-0x0caf] has been reserved
[ 0.316964] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.317963] system 00:08: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.318963] system 00:08: [mem 0xfec02000-0xfec02fff] could not be reserved
[ 0.319962] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.320962] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.321962] system 00:08: [mem 0xff780000-0xffbfffff] has been reserved
[ 0.322962] system 00:08: [mem 0xfebfe000-0xfebfefff] has been reserved
[ 0.324175] system 00:09: [io 0x0600-0x061f] has been reserved
[ 0.324962] system 00:09: [io 0x0520-0x053f] has been reserved
[ 0.325961] system 00:09: [io 0x0540-0x054f] has been reserved
[ 0.326961] system 00:09: [io 0x0640-0x065f] has been reserved
[ 0.328024] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.329086] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.329962] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.330961] system 00:0b: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.332396] pnp: PnP ACPI: found 12 devices
[ 0.332960] ACPI: ACPI bus type pnp unregistered
[ 0.340418] Switching to clocksource acpi_pm
[ 0.340976] pci 0000:04:04.0: no compatible bridge window for [mem \
0x86630000-0x8663ffff pref] [ 0.349589] pci 0000:04:04.1: no compatible
bridge \
window for [mem 0x4d000000-0x4d00ffff pref] [ 0.358231] pci 0000:01:0d.0:
PCI \
bridge to [bus 02-02] [ 0.363463] pci 0000:00:01.0: PCI bridge to [bus
01-02]
[ 0.368691] pci 0000:00:01.0: bridge window [io 0xa000-0xbfff]
[ 0.374784] pci 0000:00:01.0: bridge window [mem 0xff400000-0xff4fffff]
[ 0.381579] pci 0000:00:06.0: PCI bridge to [bus 03-03]
[ 0.386818] pci 0000:04:04.0: BAR 6: assigned [mem 0xcfe00000-0xcfe0ffff
pref]
[ 0.394040] pci 0000:04:04.1: BAR 6: assigned [mem 0xcfe10000-0xcfe1ffff
pref]
[ 0.401266] pci 0000:00:07.0: PCI bridge to [bus 04-04]
[ 0.406493] pci 0000:00:07.0: bridge window [mem 0xff500000-0xff5fffff]
[ 0.413277] pci 0000:00:07.0: bridge window [mem 0xcfe00000-0xcfefffff
64bit \
pref] [ 0.421019] pci 0000:00:08.0: PCI bridge to [bus 05-05]
[ 0.426255] pci 0000:00:09.0: PCI bridge to [bus 06-06]
[ 0.431489] pci 0000:00:0a.0: PCI bridge to [bus 07-07]
[ 0.436723] pci 0000:00:0b.0: PCI bridge to [bus 08-08]
[ 0.442042] NET: Registered protocol family 2
[ 0.446438] IP route cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.453409] TCP established hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.460496] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.466974] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.473329] TCP reno registered
[ 0.476476] UDP hash table entries: 128 (order: 0, 4096 bytes)
[ 0.482313] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[ 0.488621] NET: Registered protocol family 1
[ 0.493056] pci 0000:00:02.0: disabled boot interrupts on device [1166:0205]
[ 0.602048] pci 0000:00:04.0: Firmware left e100 interrupts enabled;
disabling
[ 0.609282] pci 0000:00:08.0: Found enabled HT MSI Mapping
[ 0.614771] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.620265] pci 0000:00:0a.0: Found enabled HT MSI Mapping
[ 0.625759] pci 0000:00:0b.0: Found enabled HT MSI Mapping
[ 0.631328] Unpacking initramfs...
[ 0.720906] Freeing initrd memory: 4352k freed
[ 0.728462] Intel AES-NI instructions are not detected.
[ 0.733849] audit: initializing netlink socket (disabled)
[ 0.739268] type=2000 audit(1330303564.739:1): initialized
[ 0.763039] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.771107] VFS: Disk quotas dquot_6.5.2
[ 0.775077] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.782023] msgmni has been set to 215
[ 0.786109] alg: No test for stdrng (krng)
[ 0.790222] NET: Registered protocol family 38
[ 0.794719] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.802138] io scheduler noop registered
[ 0.806073] io scheduler deadline registered
[ 0.810381] io scheduler cfq registered (default)
[ 0.815519] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.821128] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.827749] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.834469] input: Power Button as \
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.842648] ACPI:
Power \
Button [PWRB] [ 0.846359] input: Power Button as \
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.853755] ACPI: Power Button
\
[PWRF] [ 0.857479] input: Sleep Button as \
/devices/LNXSYSTM:00/LNXSLPBN:00/input/input2 [ 0.864875] ACPI: Sleep Button
\
[SLPF] [ 0.870137] ERST: Table is not found!
[ 0.873809] GHES: HEST is not enabled!
[ 0.877628] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.904512] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.931131] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.957891] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.984095] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.989953] Non-volatile memory driver v1.3
[ 0.994146] Linux agpgart interface v0.103
[ 0.998916] loop: module loaded
[ 1.002189] Fixed MDIO Bus: probed
[ 1.005636] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.012219] ehci_hcd 0000:00:03.2: PCI INT A -> GSI 10 (level, low) -> IRQ
10
[ 1.019369] ehci_hcd 0000:00:03.2: EHCI Host Controller
[ 1.024647] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus
number 1
[ 1.053035] ehci_hcd 0000:00:03.2: irq 10, io mem 0xff6ea000
[ 1.064018] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00
[ 1.069786] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.076573] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.083793] usb usb1: Product: EHCI Host Controller
[ 1.088679] usb usb1: Manufacturer: Linux 3.2.7-1.fc16.x86_64 ehci_hcd
[ 1.095206] usb usb1: SerialNumber: 0000:00:03.2
[ 1.099915] hub 1-0:1.0: USB hub found
[ 1.103678] hub 1-0:1.0: 4 ports detected
[ 1.107785] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.114017] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 10 (level, low) -> IRQ
10
[ 1.121168] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 1.126439] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus
number 2
[ 1.133846] ohci_hcd 0000:00:03.0: irq 10, io mem 0xff6e8000
[ 1.194038] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.200827] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.208046] usb usb2: Product: OHCI Host Controller
[ 1.212925] usb usb2: Manufacturer: Linux 3.2.7-1.fc16.x86_64 ohci_hcd
[ 1.219450] usb usb2: SerialNumber: 0000:00:03.0
[ 1.224154] hub 2-0:1.0: USB hub found
[ 1.227915] hub 2-0:1.0: 2 ports detected
[ 1.232019] ohci_hcd 0000:00:03.1: PCI INT A -> GSI 10 (level, low) -> IRQ
10
[ 1.239167] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 1.244427] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus
number 3
[ 1.251836] ohci_hcd 0000:00:03.1: irq 10, io mem 0xff6e9000
[ 1.312038] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.318832] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.326061] usb usb3: Product: OHCI Host Controller
[ 1.330949] usb usb3: Manufacturer: Linux 3.2.7-1.fc16.x86_64 ohci_hcd
[ 1.337482] usb usb3: SerialNumber: 0000:00:03.1
[ 1.342224] hub 3-0:1.0: USB hub found
[ 1.345996] hub 3-0:1.0: 2 ports detected
[ 1.350077] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.356494] usbcore: registered new interface driver usbserial
[ 1.362337] USB Serial support registered for generic
[ 1.654019] usb 2-1: new low-speed USB device number 2 using ohci_hcd
[ 1.736019] Refined TSC clocksource calibration: 2593.500 MHz.
[ 1.741854] Switching to clocksource tsc
[ 1.848045] usb 2-1: New USB device found, idVendor=0624, idProduct=0307
[ 1.854749] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 1.861879] usb 2-1: Product: Avocent DSRIQ-USB
[ 1.866411] usb 2-1: Manufacturer: Avocent
[ 1.880096] usbcore: registered new interface driver usbserial_generic
[ 1.886634] usbserial: USB Serial Driver core
[ 1.891040] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.900287] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.905249] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.910377] mousedev: PS/2 mouse device common for all mice
[ 1.916129] rtc_cmos 00:02: RTC can wake from S4
[ 1.920862] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.927007] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 1.932818] device-mapper: uevent: version 1.0.3
[ 1.937496] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: \
dm-devel@redhat.com [ 1.946492] cpuidle: using governor ladder
[ 1.950594] cpuidle: using governor menu
[ 1.954774] EFI Variables Facility v0.08 2004-May-17
[ 1.965307] input: Avocent Avocent DSRIQ-USB as \
/devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0/input/input3 [ 1.975769] \
generic-usb 0003:0624:0307.0001: input,hidraw0: USB HID v1.10 Keyboard [Avocent
\
Avocent DSRIQ-USB] on usb-0000:00:03.0-1/input0 [ 1.995428] input: Avocent
Avocent \
DSRIQ-USB as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.1/input/input4 [
\
2.005502] generic-usb 0003:0624:0307.0002: input,hidraw1: USB HID v1.10 Mouse \
[Avocent Avocent DSRIQ-USB] on usb-0000:00:03.0-1/input1 [ 2.017762]
usbcore: \
registered new interface driver usbhid [ 2.023333] usbhid: USB HID core
driver
[ 2.027223] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.032547] TCP cubic registered
[ 2.035775] Initializing XFRM netlink socket
[ 2.040152] NET: Registered protocol family 10
[ 2.044754] Mobile IPv6
[ 2.047209] NET: Registered protocol family 17
[ 2.051669] Registering the dns_resolver key type
[ 2.056473] registered taskstats version 1
[ 2.060804] Magic number: 0:237:760
[ 2.064555] rtc_cmos 00:02: setting system clock to 2012-02-27 00:46:08 UTC
\
(1330303568) [ 2.072638] powernow-k8: Found 1 Dual-Core AMD Opteron(tm)
Processor \
8218 (1 cpu cores) (version 2.20.00) [ 2.082232] powernow-k8: fid 0x12 (2600
MHz), \
vid 0xa [ 2.087282] powernow-k8: fid 0x10 (2400 MHz), vid 0xc
[ 2.092334] powernow-k8: fid 0xe (2200 MHz), vid 0xe
[ 2.097301] powernow-k8: fid 0xc (2000 MHz), vid 0x10
[ 2.102354] powernow-k8: fid 0xa (1800 MHz), vid 0x10
[ 2.107405] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 2.112777] Initializing network drop monitor service
[ 2.120657] Freeing unused kernel memory: 1596k freed
[ 2.126415] Write protecting the kernel read-only data: 10240k
[ 2.132530] Freeing unused kernel memory: 52k freed
[ 2.142301] Freeing unused kernel memory: 1552k freed
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Free memory/T[ 2.157544] EDAC MC: Ver: 2.1.0
otal memory (free %): 90620 / 11[ 2.163803] tg3.c:v3.121 (November 2, 2011)
3776 ( 79.6477 )[ 2.168548] tg3 0000:04:04.0: PCI INT A -> GSI 26 (level,
low) -> \
IRQ 26
Loading joydev.ko module
Loading edac_core.ko module
Loading tg3.ko module
[ 2.297926] tg3 0000:04:04.0: eth0: Tigon3 [partno(BCM95780) rev 8003] \
(PCIX:133MHz:64-bit) MAC address 00:e0:81:46:70:52 [ 2.308887] tg3
0000:04:04.0: \
eth0: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ \
2.318711] tg3 0000:04:04.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0]
TSOcap[1] \
[ 2.326622] tg3 0000:04:04.0: eth0: dma_rwctrl[76144000] dma_mask[40-bit] [
\
2.333614] tg3 0000:04:04.1: PCI INT B -> GSI 27 (level, low) -> IRQ 27 [
2.362600] \
tg3 0000:04:04.1: eth1: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit)
MAC \
address 00:e0:81:46:70:53 [ 2.373563] tg3 0000:04:04.1: eth1: attached PHY
is 5780 \
(10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 2.383381] tg3
0000:04:04.1: \
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.391293] tg3 \
0000:04:04.1: eth1: dma_rwctrl[76144000] dma_mask[40-bit] Loading mii.ko module
Loading s[ 2.400313] MCE: In-kernel MCE decoding enabled.
erio_raw.ko modu[ 2.406532] k8temp 0000:00:18.3: Temperature readouts might
be \
wrong - check erratum #141 le
Loading edac[ 2.415643] k8temp 0000:00:19.3: Temperature readouts might be
wrong - \
check erratum #141 _mce_amd.ko module
Loading k8te[ 2.426335] shpchp: Standard Hot Plug PCI Controller Driver
version: \
0.4 mp.ko module
Loading shpchp.ko module
Loading sunrpc.ko module[ 2.438896] RPC: Registered named UNIX socket
transport \
module.
[ 2.445870] RPC: Registered udp transport module.
[ 2.450720] RPC: Registered tcp transport module.
[ 2.455425] RPC: Registered tcp NFSv4.1 backchannel transport module.
Loading ata_generic.ko module
L[ 2.464264] sata_svw 0000:01:0e.0: PCI INT A -> GSI 11 (level, low) -> IRQ
11
oading pata_acpi.ko module
Loading sata_svw.ko [ 2.474714] scsi0 : sata_svw
module
[ 2.479412] scsi1 : sata_svw
[ 2.482926] scsi2 : sata_svw
[ 2.486253] scsi3 : sata_svw
[ 2.489403] ata1: SATA max UDMA/133 mmio m8192@0xff4fe000 port 0xff4fe000
irq 11
[ 2.496806] ata2: SATA max UDMA/133 mmio m8192@0xff4fe000 port 0xff4fe100
irq 11
[ 2.504202] ata3: SATA max UDMA/133 mmio m8192@0xff4fe000 port 0xff4fe200
irq 11
[ 2.511596] ata4: SATA max UDMA/133 mmio m8192@0xff4fe000 port 0xff4fe300
irq 11
[ 2.706499] Marking TSC unstable due to cpufreq changes
[ 2.708562] Switching to clocksource acpi_pm
[ 2.824051] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
--
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
next reply other threads:[~2012-05-07 4:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-07 4:05 bugzilla-daemon [this message]
2012-05-13 14:26 ` [Bug 43213] sata_svw failed to kdump with pending IOs bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-43213-11613@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.