[Bug 59168] [nvc1/Quardro1000M|nvc3/Quadro2000M] graphic garbage/corruption/noise on resume - bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ

From: bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ@public.gmane.org
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: [Bug 59168] [nvc1/Quardro1000M|nvc3/Quadro2000M] graphic garbage/corruption/noise on resume
Date: Tue, 03 Sep 2013 01:05:02 +0000	[thread overview]
Message-ID: <bug-59168-8800-WIcFJRcmXZ@http.bugs.freedesktop.org/> (raw)
In-Reply-To: <bug-59168-8800-V0hAGp6uBxMKqLRl/0Ahz6D7qz1kEfGD2LY78lusg7I@public.gmane.org/>

[-- Attachment #1.1: Type: text/plain, Size: 2036 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=59168

--- Comment #39 from Laurence Lee <rubyjedi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> ---
I hate to resurrect a zombie thread, but I am still affected by this
suspend/resume issue. My system also reports "SHADER 0xa004021e" as a common
point of failure.

On Fedora 18, kernel 3.10.10-100.fc18.x86_64), my screen resumes from
hibernation with garbage on-screen as described in this ticket, and messages
like these are repeated in the logs:

Sep  2 14:23:38 ufo-laptop kernel: [   66.074252] nouveau E[ 
PGRAPH][0000:01:00.0] TRAP ch 1 [0x005fbb1000 X[846]]
Sep  2 14:23:38 ufo-laptop kernel: [   66.074264] nouveau E[ 
PGRAPH][0000:01:00.0] SHADER 0xa004021e

lspci -nnv:

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:1251]
(rev a1) (prog-if 00 [VGA controller])
    Subsystem: CLEVO/KAPOK Computer Device [1558:5102]
    Flags: bus master, fast devsel, latency 0, IRQ 16
    Memory at f4000000 (32-bit, non-prefetchable) [size=32M]
    Memory at e8000000 (64-bit, prefetchable) [size=128M]
    Memory at f0000000 (64-bit, prefetchable) [size=64M]
    I/O ports at e000 [size=128]
    Expansion ROM at f6000000 [disabled] [size=512K]
    Capabilities: [60] Power Management version 3
    Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
    Capabilities: [78] Express Endpoint, MSI 00
    Capabilities: [b4] Vendor Specific Information: Len=14 <?>
    Capabilities: [100] Virtual Channel
    Capabilities: [128] Power Budgeting <?>
    Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
    Kernel driver in use: nouveau

The only thing that works at the moment is setting nouveau.noaccel=1. Setting
nouveau.config=DEVINIG=NvForcePost=1 causes bootup to Plymouth with a black,
unlit screen.

I would really like to have a long-term solution to this, and am willing to act
upon any suggestions or patches you may have to reach that goal. Thanks!

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 2911 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau