From: bugzilla-daemon@bugzilla.kernel.org
To: dri-devel@lists.freedesktop.org
Subject: [Bug 70701] New: With DPM enabled, Radeon 4570 (R710) doesn't remain in Single_Disp state
Date: Mon, 17 Feb 2014 08:49:18 +0000 [thread overview]
Message-ID: <bug-70701-2300@https.bugzilla.kernel.org/> (raw)
https://bugzilla.kernel.org/show_bug.cgi?id=70701
Bug ID: 70701
Summary: With DPM enabled, Radeon 4570 (R710) doesn't remain in
Single_Disp state
Product: Drivers
Version: 2.5
Kernel Version: 3.13
Hardware: x86-64
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Video(DRI - non Intel)
Assignee: drivers_video-dri@kernel-bugs.osdl.org
Reporter: abhinav.kumar.in@gmail.com
Regression: No
When using DPM with the open-source radeon driver, the Card first gets into
Power-State-1 which is the desirable one. But after few seconds, it changes its
state to a seemingly multi-display one.
Tested on a Dell Studio 1555 with Radeon 4570 running Trusty alpha and openSUSE
13.1.
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] RV710/M92 [Mobility Radeon HD 4530/4570/545v] [1002:9553] (prog-if 00
[VGA controller])
Subsystem: Dell Mobility Radeon HD 4570 [1028:02be]
Flags: bus master, fast devsel, latency 0, IRQ 46
Memory at d0000000 (32-bit, prefetchable) [size=256M]
I/O ports at 2000 [size=256]
Memory at fc000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at fc020000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Dmesg log.
(It successfully gets into single_disp video mode.)
[ 2.047282] [drm] ib test on ring 5 succeeded
[ 2.073894] [drm] radeon atom DIG backlight initialized
[ 2.073898] [drm] Radeon Display Connectors
[ 2.073900] [drm] Connector 0:
[ 2.073902] [drm] VGA-1
[ 2.073904] [drm] DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac
0x7fac
[ 2.073906] [drm] Encoders:
[ 2.073907] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.073923] [drm] Connector 1:
[ 2.073925] [drm] HDMI-A-1
[ 2.073926] [drm] HPD1
[ 2.073928] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c
0x7e5c
[ 2.073930] [drm] Encoders:
[ 2.073931] [drm] DFP1: INTERNAL_UNIPHY
[ 2.073932] [drm] Connector 2:
[ 2.073934] [drm] LVDS-1
[ 2.073937] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.073940] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c
0x7e4c
[ 2.073955] [drm] Encoders:
[ 2.073956] [drm] LCD1: INTERNAL_UNIPHY2
[ 2.073997] [drm] Internal thermal controller with fan control
[ 2.074090] == power state 0 ==
[ 2.074092] ui class: none
[ 2.074094] internal class: boot
[ 2.074096] caps: video
[ 2.074099] uvd vclk: 0 dclk: 0
[ 2.074115] power level 0 sclk: 50000 mclk: 80000 vddc: 1200
[ 2.074117] power level 1 sclk: 50000 mclk: 80000 vddc: 1200
[ 2.074119] power level 2 sclk: 50000 mclk: 80000 vddc: 1200
[ 2.074120] status: c r b
[ 2.074123] == power state 1 ==
[ 2.074124] ui class: performance
[ 2.074126] internal class: none
[ 2.074128] caps: single_disp video
[ 2.074131] uvd vclk: 0 dclk: 0
[ 2.074133] power level 0 sclk: 22000 mclk: 30000 vddc: 900
[ 2.074149] power level 1 sclk: 30000 mclk: 50000 vddc: 900
[ 2.074150] power level 2 sclk: 68000 mclk: 80000 vddc: 1200
[ 2.074152] status:
[ 2.074153] == power state 2 ==
[ 2.074155] ui class: battery
[ 2.074156] internal class: none
[ 2.074158] caps: single_disp video
[ 2.074161] uvd vclk: 0 dclk: 0
[ 2.074163] power level 0 sclk: 22000 mclk: 30000 vddc: 900
[ 2.074164] power level 1 sclk: 30000 mclk: 30000 vddc: 900
[ 2.074180] power level 2 sclk: 30000 mclk: 30000 vddc: 900
[ 2.074181] status:
[ 2.074183] == power state 3 ==
[ 2.074184] ui class: none
[ 2.074185] internal class: uvd
[ 2.074188] caps: video
[ 2.074190] uvd vclk: 54000 dclk: 40000
[ 2.074192] power level 0 sclk: 60000 mclk: 80000 vddc: 1100
[ 2.074193] power level 1 sclk: 60000 mclk: 80000 vddc: 1100
[ 2.074195] power level 2 sclk: 60000 mclk: 80000 vddc: 1100
[ 2.074196] status:
[ 2.074212] == power state 4 ==
[ 2.074213] ui class: performance
[ 2.074214] internal class: none
[ 2.074216] caps: video
[ 2.074219] uvd vclk: 0 dclk: 0
[ 2.074220] power level 0 sclk: 30000 mclk: 80000 vddc: 1200
[ 2.074222] power level 1 sclk: 30000 mclk: 80000 vddc: 1200
[ 2.074224] power level 2 sclk: 68000 mclk: 80000 vddc: 1200
[ 2.074225] status:
[ 2.074226] == power state 5 ==
[ 2.074227] ui class: battery
[ 2.074243] internal class: none
[ 2.074245] caps: video
[ 2.074247] uvd vclk: 0 dclk: 0
[ 2.074249] power level 0 sclk: 30000 mclk: 40000 vddc: 1000
[ 2.074251] power level 1 sclk: 30000 mclk: 40000 vddc: 1000
[ 2.074252] power level 2 sclk: 30000 mclk: 40000 vddc: 1000
[ 2.074253] status:
[ 2.074255] == power state 6 ==
[ 2.074256] ui class: none
[ 2.074257] internal class: uvd_hd
[ 2.074259] caps: video
[ 2.074276] uvd vclk: 40000 dclk: 30000
[ 2.074278] power level 0 sclk: 45000 mclk: 50000 vddc: 1000
[ 2.074279] power level 1 sclk: 45000 mclk: 50000 vddc: 1000
[ 2.074281] power level 2 sclk: 45000 mclk: 50000 vddc: 1000
[ 2.074282] status:
[ 2.074284] == power state 7 ==
[ 2.074285] ui class: none
[ 2.074286] internal class: uvd_sd
[ 2.074288] caps: video
[ 2.074291] uvd vclk: 10000 dclk: 10000
[ 2.074292] power level 0 sclk: 30000 mclk: 40000 vddc: 900
[ 2.074308] power level 1 sclk: 30000 mclk: 40000 vddc: 900
[ 2.074310] power level 2 sclk: 30000 mclk: 40000 vddc: 900
[ 2.074311] status:
[ 2.076071] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.078243] ata1.00: ATA-8: ST9500325AS, 0003DEM1, max UDMA/133
[ 2.078260] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.080345] ata1.00: configured for UDMA/133
[ 2.080712] scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0003
PQ: 0 ANSI: 5
[ 2.081012] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465
GiB)
[ 2.081051] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.081194] sd 0:0:0:0: [sda] Write Protect is off
[ 2.081197] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.081274] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.090253] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-T633A, DW20, max UDMA/100
[ 2.090259] ata2.00: applying bridge limits
[ 2.104271] ata2.00: configured for UDMA/100
[ 2.107969] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-T633A DW20
PQ: 0 ANSI: 5
[ 2.113543] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 2.113549] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.113784] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.113903] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.165001] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.166164] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.176413] switching from power state:
[ 2.176418] ui class: none
[ 2.176420] internal class: boot
[ 2.176422] caps: video
[ 2.176425] uvd vclk: 0 dclk: 0
[ 2.176428] power level 0 sclk: 50000 mclk: 80000 vddc: 1200
[ 2.176443] power level 1 sclk: 50000 mclk: 80000 vddc: 1200
[ 2.176445] power level 2 sclk: 50000 mclk: 80000 vddc: 1200
[ 2.176446] status: c b
[ 2.176449] switching to power state:
[ 2.176450] ui class: performance
[ 2.176451] internal class: none
[ 2.176454] caps: single_disp video
[ 2.176457] uvd vclk: 0 dclk: 0
[ 2.176458] power level 0 sclk: 22000 mclk: 30000 vddc: 900
[ 2.176474] power level 1 sclk: 30000 mclk: 50000 vddc: 900
[ 2.176476] power level 2 sclk: 68000 mclk: 80000 vddc: 1200
[ 2.176477] status: r
[ 2.180231] firewire_core 0000:09:01.0: created device fw0: GUID
324fc0003c809158, S400
[ 2.182491] [drm] radeon: dpm initialized
==================================================================
After a sec, it moves into another state.
[ 3.378716] [drm] fb mappable at 0xD045E000
[ 3.378719] [drm] vram apper at 0xD0000000
[ 3.378721] [drm] size 4325376
[ 3.378722] [drm] fb depth is 24
[ 3.378724] [drm] pitch is 5632
[ 3.378877] fbcon: radeondrmfb (fb0) is primary device
[ 3.620192] switching from power state:
[ 3.620212] ui class: performance
[ 3.620214] internal class: none
[ 3.620217] caps: single_disp video
[ 3.620219] uvd vclk: 0 dclk: 0
[ 3.620221] power level 0 sclk: 22000 mclk: 30000 vddc: 900
[ 3.620222] power level 1 sclk: 30000 mclk: 50000 vddc: 900
[ 3.620224] power level 2 sclk: 68000 mclk: 80000 vddc: 1200
[ 3.620226] status: c
[ 3.620227] switching to power state:
[ 3.620228] ui class: performance
[ 3.620244] internal class: none
[ 3.620247] caps: video
[ 3.620248] uvd vclk: 0 dclk: 0
[ 3.620250] power level 0 sclk: 30000 mclk: 80000 vddc: 1200
[ 3.620251] power level 1 sclk: 30000 mclk: 80000 vddc: 1200
[ 3.620253] power level 2 sclk: 68000 mclk: 80000 vddc: 1200
[ 3.620254] status: r
[ 4.440416] Console: switching to colour frame buffer device 170x48
[ 4.446012] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 4.446014] radeon 0000:01:00.0: registered panic notifier
[ 4.446045] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on
minor 0
Xrandr
abhinav@abhinav-Studio-1555:~$ xrandr
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
VGA-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
LVDS connected primary 1366x768+0+0 (normal left inverted right x axis y axis)
344mm x 194mm
1366x768 59.6*+
1280x720 59.9
1152x768 59.8
1024x768 59.9
800x600 59.9
848x480 59.7
720x480 59.7
640x480 59.4
Temp on Power-state 4 remains 18 deg Celsius hotter than Power-State 1 (which
is what I get with the latest Catalyst)
--
You are receiving this mail because:
You are watching the assignee of the bug.
next reply other threads:[~2014-02-17 8:49 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-17 8:49 bugzilla-daemon [this message]
2014-02-17 17:47 ` [Bug 70701] With DPM enabled, Radeon 4570 (R710) doesn't remain in Single_Disp state bugzilla-daemon
2014-02-18 11:14 ` bugzilla-daemon
2014-02-18 14:23 ` bugzilla-daemon
2014-02-18 20:15 ` bugzilla-daemon
2014-02-27 22:00 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-70701-2300@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.