From: bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ@public.gmane.org
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: [Bug 73233] New: [NV43] GeForce 6600 GT nouveau on AMD-Vi triggers constant errors: Event logged IO_PAGE_FAULT
Date: Thu, 02 Jan 2014 18:01:26 +0000 [thread overview]
Message-ID: <bug-73233-8800@http.bugs.freedesktop.org/> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 7490 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=73233
Priority: medium
Bug ID: 73233
Assignee: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Summary: [NV43] GeForce 6600 GT nouveau on AMD-Vi triggers
constant errors: Event logged IO_PAGE_FAULT
QA Contact: xorg-team-go0+a7rfsptAfugRpC6u6w@public.gmane.org
Severity: normal
Classification: Unclassified
OS: All
Reporter: michele-Vrs1pLNSz9odnm+yROfE0A@public.gmane.org
Hardware: Other
Status: NEW
Version: unspecified
Component: Driver/nouveau
Product: xorg
Via https://bugzilla.redhat.com/show_bug.cgi?id=1047637 on this AMD-Vi box
there are constant errors like the following on 3.12.5-302.fc20.x86_64:
[ 7.171789] AMD-Vi: Event logged [IO_PAGE_FAULT device=01:00.0 domain=0x0012
address=0x0000000000000000 flags=0x0000]
[ 7.171791] AMD-Vi: Event logged [IO_PAGE_FAULT device=01:00.0 domain=0x0012
address=0x0000000000000040 flags=0x0000]
IOMMU related stuff:
[ 0.891828] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.891846] pci 0000:00:00.2: irq 72 for MSI/MSI-X
[ 0.899108] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.975349] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.975352] software IO TLB [mem 0xceafd000-0xd2afd000] (64MB) mapped at
[ffff8800ceafd000-ffff8800d2afcfff]
Nouveau related dmesg:
[ 3.151771] checking generic (d8000000 300000) vs hw (d8000000 8000000)
[ 3.151771] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing
generic driver
[ 3.174182] Console: switching to colour dummy device 80x25
[ 3.174276] pcieport 0000:00:02.0: driver skip pci_set_master, fix it!
[ 3.174472] [drm] hdmi device not found 1 0 1
[ 3.174564] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x043000a4
[ 3.174567] nouveau [ DEVICE][0000:01:00.0] Chipset: NV43 (NV43)
[ 3.174569] nouveau [ DEVICE][0000:01:00.0] Family : NV40
[ 3.178621] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 3.267873] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 3.267878] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 3.267951] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 3.267955] nouveau [ VBIOS][0000:01:00.0] version 05.43.02.80.00
[ 3.268084] nouveau [ PFB][0000:01:00.0] RAM type: GDDR3
[ 3.268087] nouveau [ PFB][0000:01:00.0] RAM size: 128 MiB
[ 3.268089] nouveau [ PFB][0000:01:00.0] ZCOMP: 378880 tags
[ 3.294544] nouveau [ PTHERM][0000:01:00.0] FAN control: PWM
[ 3.294556] nouveau [ PTHERM][0000:01:00.0] fan management: disabled
[ 3.294559] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 3.314625] [TTM] Zone kernel: Available graphics memory: 8167966 kiB
[ 3.314628] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 3.314630] [TTM] Initializing pool allocator
[ 3.314634] [TTM] Initializing DMA pool allocator
[ 3.314642] nouveau [ DRM] VRAM: 124 MiB
[ 3.314644] nouveau [ DRM] GART: 512 MiB
[ 3.314648] nouveau [ DRM] TMDS table version 1.1
[ 3.314651] nouveau [ DRM] DCB version 3.0
[ 3.314653] nouveau [ DRM] DCB outp 00: 01000300 00000028
[ 3.314656] nouveau [ DRM] DCB outp 01: 04011312 00000000
[ 3.314659] nouveau [ DRM] DCB outp 02: 04011310 00000028
[ 3.314661] nouveau [ DRM] DCB outp 03: 020223f1 0040c080
[ 3.314664] nouveau [ DRM] DCB conn 00: 0000
[ 3.314666] nouveau [ DRM] DCB conn 01: 2130
[ 3.314669] nouveau [ DRM] DCB conn 02: 0210
[ 3.314671] nouveau [ DRM] DCB conn 03: 0211
[ 3.314673] nouveau [ DRM] DCB conn 04: 0213
[ 3.316351] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.316354] [drm] No driver support for vblank timestamp query.
[ 3.316400] nouveau [ DRM] 0xD625: Parsing digital output script table
[ 3.366780] Switched to clocksource tsc
[ 3.366795] nouveau [ DRM] 2 available performance level(s)
[ 3.366801] nouveau [ DRM] 0: core 300MHz shader 300MHz memory 1000MHz
voltage 1300mV fanspeed 100%
[ 3.366805] nouveau [ DRM] 1: core 500MHz shader 500MHz memory 1000MHz
voltage 1400mV fanspeed 100%
[ 3.366809] nouveau [ DRM] c: core 299MHz shader 299MHz memory 598MHz
voltage 1300mV fanspeed 100%
[ 3.367495] nouveau [ DRM] MM: using M2MF for buffer copies
[ 3.367501] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 3)
[ 3.485551] nouveau [ DRM] allocated 1920x1080 fb: 0x9000, bo
ffff88040d20f400
[ 3.485610] fbcon: nouveaufb (fb0) is primary device
[ 3.505918] nouveau [ DRM] 0xD625: Parsing digital output script table
[ 3.555882] Console: switching to colour frame buffer device 240x67
[ 3.557572] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 3.557573] nouveau 0000:01:00.0: registered panic notifier
[ 3.557577] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on
minor 0
PCI related info to 01:00.0:
01:00.0 0300: 10de:0140 (rev a2) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=64M]
Region 1: Memory at d8000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at f4000000 (64-bit, non-prefetchable) [size=16M]
Expansion ROM at f5000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1
<4us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency
L0s <256ns, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [128 v1] Power Budgeting <?>
Kernel driver in use: nouveau
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 8905 bytes --]
[-- Attachment #2: Type: text/plain, Size: 181 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
next reply other threads:[~2014-01-02 18:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-02 18:01 bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ [this message]
[not found] ` <bug-73233-8800-V0hAGp6uBxMKqLRl/0Ahz6D7qz1kEfGD2LY78lusg7I@public.gmane.org/>
2014-01-21 8:40 ` [Bug 73233] [NV43] GeForce 6600 GT nouveau on AMD-Vi triggers constant errors: Event logged IO_PAGE_FAULT bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2019-12-04 8:41 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-73233-8800@http.bugs.freedesktop.org/ \
--to=bugzilla-daemon-cc+yj3umiyqdupfqwhejaq@public.gmane.org \
--cc=nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.