I don't know about the current state of this, I would put some= effort into it if nobody else is working on it. Daniel Drake's patch is a good starting po= int for that. Currently, it looks like the problem lies in that the audio dev is only ever looked after on nouveau drm module load. Instead, the state of it should be checked/toggled on - connector connected/disconected - poweron/off the corresponding gpu e.g remove the audio dev on suspend if it has been previously enabled, on resume check if any connector is connected that needs it and enabled it aga= in in that case. This would also work around the quirks of some laptop's acpi toggling the b= it either on boot [1] or on suspend [2]. Desktop cards should not be affected by that because they start with audio = dev enabled, so it will not be touched. Quirks will have to be added for nForce chipsets with IGP since those have a separate audio dev. BTW, the kernel module has moved to: https://github.com/hhfeuer/nvh= da [1] ht= tps://devtalk.nvidia.com/default/topic/1024022/linux/gtx-1060-no-audio-over= -hdmi-only-hda-intel-detected-azalia/post/5228002/#5228002 [2] ht= tps://devtalk.nvidia.com/default/topic/1024022/linux/gtx-1060-no-audio-over= -hdmi-only-hda-intel-detected-azalia/post/5234127/#5234127