We've got a few bug reports about the kernel panic showing radeon kernel code
path. All seem related with HDMI. Typically, the kernel panic or Oops is
triggered when the system is booted with HDMI. One reporter mentioned that it
happens when switching to HDMI-only mode even after hotplugging HDMI, too.
The affected kernels are, at least, 3.16 and 3.17. One report mentions that it
happens with 3.15, too.
Oops looks like:
BUG: unable to handle kernel paging request at 000000040101077c
IP: [<ffffffffa00631dd>] drm_helper_connector_dpms+0x4d/0x230 [drm_kms_helper]
PGD bb0db067 PUD 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 817 Comm: Xorg Not tainted 3.16.6-2-default #1
Hardware name: MEDION S561X/S561X, BIOS A16C1IM7 Ver1.0G 09/10/2009
task: ffff8800bab88290 ti: ffff8800babac000 task.ti: ffff8800babac000
RIP: 0010:[<ffffffffa00631dd>] [<ffffffffa00631dd>]
drm_helper_connector_dpms+0x4d/0x230 [drm_kms_helper]
RSP: 0018:ffff8800babafd50 EFLAGS: 00010286
RAX: ffffffffa0063190 RBX: ffff880037201e00 RCX: 000000040101046c
RDX: 0000000000000003 RSI: 0000000000000003 RDI: ffff8800ba310400
RBP: 6144796669746f6e R08: 0000000000000008 R09: ffff88012fd68d40
R10: ffffffffa00332e0 R11: ffff8800babafe08 R12: 0000000000000003
R13: 0000000000000003 R14: 0000000000000000 R15: 00000000fffffff2
FS: 00007ff1601658c0(0000) GS:ffff88013fc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000040101077c CR3: 00000000b9b4d000 CR4: 00000000000407f0
Stack:
ffff8800372af800 ffff8800babafdb0 ffff8800ba310428 ffff8800b9e26750
0000000000000003 ffffffffa0023fc6 ffff8800babafe08 00000000000000ab
fffffffffffffff2 ffff8800372af800 ffff880138b05800 ffffffffa002400e
Call Trace:
[<ffffffffa0023fc6>] drm_mode_obj_set_property_ioctl+0x396/0x3b0 [drm]
[<ffffffffa002400e>] drm_mode_connector_property_set_ioctl+0x2e/0x40 [drm]
[<ffffffffa0013897>] drm_ioctl+0x1c7/0x5b0 [drm]
[<ffffffffa01cd046>] radeon_drm_ioctl+0x46/0x80 [radeon]
[<ffffffff811c3c9f>] do_vfs_ioctl+0x2cf/0x4b0
[<ffffffff811c3f01>] SyS_ioctl+0x81/0xa0
[<ffffffff815d0c2d>] system_call_fastpath+0x1a/0x1f
[<00007ff15e493397>] 0x7ff15e493396
Code: 6b 40 44 8b b7 04 02 00 00 45 39 ee 0f 84 0c 01 00 00 48 85 db 44 89 af
04 02 00 00 0f 84 bc 01 00 00 48 8b 0b 41 bc 03 00 00 00 <48> 8b 91 10 03 00 00
48 81 c1 10 03 00 00 [ 132.533672] Kernel panic - not syncing: Watchdog
detected hard LOCKUP on cpu 0
Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range:
0xffffffff80000000-0xffffffff9fffffff)
drm_kms_helper: panic occurred, switching back to text console
Rebooting in 90 seconds..
The spot is drm_helper_choose_encoder_dpms(), and the connector_list seems
broken.
Another bug report shows a slightly different trace, and the spot it
drm_crtc_helper_set_config(),
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
save_encoders[count++] = *encoder;
}
so encoder_list seems broken.
The original bug reports:
HDMI output using radeon driver freezes when used as only output
http://bugzilla.opensuse.org/show_bug.cgi?id=904932
13.2 doesn't boot: "BUG: unable to handle kernel NULL pointer deference..." /
"unable to handle kernel paging request"
http://bugzilla.opensuse.org/show_bug.cgi?id=901550
Kernel 3.15 + radeon + hdmi = system freeze
http://bugzilla.opensuse.org/show_bug.cgi?id=884390
FWIW, I tested the very same system (openSUSE 13.2) with a couple of machines
with radeon, but couldn't reproduce the problem. I noticed that all three
reports above are with rv710, while my systems were newer ones (TURKS, ARUBA),
so this issue might be specific to chip model.