From: bugzilla-daemon@bugzilla.kernel.org
To: linux-ide@vger.kernel.org
Subject: [Bug 86611] New: USB TO IDE Bridge stopped to work properly after kernel upgrade linux-3.12.21 -> linux-3.14.14
Date: Mon, 20 Oct 2014 21:26:09 +0000 [thread overview]
Message-ID: <bug-86611-11633@https.bugzilla.kernel.org/> (raw)
https://bugzilla.kernel.org/show_bug.cgi?id=86611
Bug ID: 86611
Summary: USB TO IDE Bridge stopped to work properly after
kernel upgrade linux-3.12.21 -> linux-3.14.14
Product: IO/Storage
Version: 2.5
Kernel Version: 3.14.14, 3.16.6
Hardware: All
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: IDE
Assignee: io_ide@kernel-bugs.osdl.org
Reporter: newchief@king.net.pl
Regression: No
As in summary: 058f:6390 USB to IDE bridge is not working anymore.
On linux-3.12.21 dmesg says:
[ 302.674422] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0010
[ 302.674438] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001002 0 ACK
POWER sig=se0 CSC
[ 302.674464] hub 1-0:1.0: port 4, status 0100, change 0001, 12 Mb/s
[ 302.700011] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001c03 0 ACK
POWER sig=? CSC CONNECT
[ 302.804017] hub 1-0:1.0: debounce: port 4: total 125ms stable 100ms status
0x501
[ 302.855244] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 302.855248] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 302.906018] usb 1-4: new high-speed USB device number 5 using ehci-pci
[ 305.083246] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 305.083251] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 307.272882] usb 1-4: default language 0x0409
[ 307.273507] usb 1-4: udev 5, busnum 1, minor = 4
[ 307.273511] usb 1-4: New USB device found, idVendor=058f, idProduct=6390
[ 307.273515] usb 1-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 307.273518] usb 1-4: Product: USB TO IDE Bridge
[ 307.273520] usb 1-4: Manufacturer: Generic
[ 307.273627] usb 1-4: usb_probe_device
[ 307.273631] usb 1-4: configuration #1 chosen from 1 choice
[ 307.273753] usb 1-4: adding 1-4:1.0 (config #1, interface 0)
[ 307.273778] usb-storage 1-4:1.0: usb_probe_interface
[ 307.273782] usb-storage 1-4:1.0: usb_probe_interface - got id
[ 307.273785] usb-storage 1-4:1.0: USB Mass Storage device detected
[ 307.275163] scsi9 : usb-storage 1-4:1.0
[ 307.275274] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0010
[ 329.811259] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 329.811267] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 329.862020] usb 1-4: reset high-speed USB device number 5 using ehci-pci
[ 330.017254] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 330.017259] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 330.172408] scsi 9:0:0:0: Direct-Access Generic USB Disk 9.02
PQ: 0 ANSI: 2
[ 330.172653] sd 9:0:0:0: Attached scsi generic sg6 type 0
[ 330.173648] sd 9:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465
GiB)
[ 330.174641] sd 9:0:0:0: [sdf] Write Protect is off
[ 330.174644] sd 9:0:0:0: [sdf] Mode Sense: 03 00 00 00
[ 330.176027] sd 9:0:0:0: [sdf] No Caching mode page found
[ 330.176030] sd 9:0:0:0: [sdf] Assuming drive cache: write through
[ 330.181516] sd 9:0:0:0: [sdf] No Caching mode page found
[ 330.181520] sd 9:0:0:0: [sdf] Assuming drive cache: write through
[ 330.204155] sdf: sdf1
[ 330.207903] sd 9:0:0:0: [sdf] No Caching mode page found
[ 330.207910] sd 9:0:0:0: [sdf] Assuming drive cache: write through
[ 330.207914] sd 9:0:0:0: [sdf] Attached SCSI disk
On 3.14.14 it says:
[ 4280.846576] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001003 0 ACK
POWER sig=se0 CSC CONNECT
[ 4280.872016] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001c03 0 ACK
POWER sig=? CSC CONNECT
[ 4281.027259] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 4281.027263] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 4281.078020] usb 1-4: new high-speed USB device number 5 using ehci-pci
[ 4283.255265] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 4283.255275] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 4285.446403] usb 1-4: New USB device found, idVendor=058f, idProduct=6390
[ 4285.446410] usb 1-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 4285.446412] usb 1-4: Product: USB TO IDE Bridge
[ 4285.446414] usb 1-4: Manufacturer: Generic
[ 4285.446538] usb 1-4: usb_probe_device
[ 4285.446673] usb-storage 1-4:1.0: usb_probe_interface
[ 4285.446677] usb-storage 1-4:1.0: usb_probe_interface - got id
[ 4285.446681] usb-storage 1-4:1.0: USB Mass Storage device detected
[ 4285.447407] scsi9 : usb-storage 1-4:1.0
[ 4307.805273] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 4307.805282] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 4307.856022] usb 1-4: reset high-speed USB device number 5 using ehci-pci
[ 4308.018268] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 4308.018273] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
And there's nothing after. I've found that on 3.14.14 scsi_probe_lun function
does not result in following output:
sd 9:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB)
which is the case for 3.12.21.
Also I tried Fedora with 3.16.6 - still USB TO IDE Bridge does not work
properly.
Some time ago 058f:6390 was quite popular and I think it would be good to have
it still supported (it is not listed as unusual device). I still have huge IDE
disks with archive storage, it would be wasteful to throw them away.
Note that other usb-storage devices (smartphones, SD card readers) work for me
properly with 3.14.14 and newer.
--
You are receiving this mail because:
You are watching the assignee of the bug.
next reply other threads:[~2014-10-20 21:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-20 21:26 bugzilla-daemon [this message]
2014-10-20 23:05 ` [Bug 86611] USB TO IDE Bridge stopped to work properly after kernel upgrade linux-3.12.21 -> linux-3.14.14 bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-86611-11633@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.