From: bugzilla-daemon@bugzilla.kernel.org
To: linux-scsi@vger.kernel.org
Subject: [Bug 98171] [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly
Date: Sat, 08 Aug 2015 23:58:53 +0000 [thread overview]
Message-ID: <bug-98171-11613-4XOxt2LUqe@https.bugzilla.kernel.org/> (raw)
In-Reply-To: <bug-98171-11613@https.bugzilla.kernel.org/>
https://bugzilla.kernel.org/show_bug.cgi?id=98171
Carlos Guidugli <guidugli@gmail.com> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |guidugli@gmail.com
--- Comment #4 from Carlos Guidugli <guidugli@gmail.com> ---
Hi,
I am also having the same issue with Fedora 22, kernel 4.1.3-200.fc22.x86_64.
Any recommendations?
[ 0.828869] ata9: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610100
irq 35
[ 0.828873] ata10: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610180
irq 35
[ 0.828877] ata11: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610200
irq 35
[ 0.828880] ata12: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610280
irq 35
[ 0.828884] ata13: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610300
irq 35
[ 0.828887] ata14: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610380
irq 35
[ 0.828890] ata15: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610400
irq 35
[ 0.828894] ata16: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610480
irq 35
[ 1.116331] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.117021] ata1.00: ATA-9: WDC WD60EFRX-68MYMN1, 82.00A82, max UDMA/133
[ 1.117026] ata1.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.118349] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.119026] ata6.00: ATA-9: WDC WD60EFRX-68MYMN1, 82.00A82, max UDMA/133
[ 1.119031] ata6.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.119341] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.119346] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.119377] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.119394] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.119413] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.119740] ata6.00: configured for UDMA/133
[ 1.120073] ata5.00: ATA-9: WDC WD60EFRX-68MYMN1, 82.00A82, max UDMA/133
[ 1.120078] ata5.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.120798] ata5.00: configured for UDMA/133
[ 1.134350] ata14: SATA link down (SStatus 0 SControl 300)
[ 1.134376] ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.134401] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.134498] ata16.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 1.134652] ata16.00: configured for UDMA/66
[ 1.136354] ata15: SATA link down (SStatus 0 SControl 300)
[ 1.136379] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.136403] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.136425] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.136446] ata13: SATA link down (SStatus 0 SControl 300)
[ 1.323489] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.327731] ata3.00: HPA detected: current 3907027055, native 3907029168
[ 1.327822] ata2.00: ATA-9: WDC WD60EFRX-68MYMN1, 82.00A82, max UDMA/133
[ 1.327827] ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.327839] ata3.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133
[ 1.327844] ata3.00: 3907027055 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.327966] ata4.00: HPA detected: current 3907027055, native 3907029168
[ 1.328069] ata4.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133
[ 1.328073] ata4.00: 3907027055 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.328281] ata1.00: configured for UDMA/133
[ 1.328518] scsi 0:0:0:0: Direct-Access ATA WDC WD60EFRX-68M 0A82
PQ: 0 ANSI: 5
[ 1.328620] ata2.00: configured for UDMA/133
[ 1.328965] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.329004] sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00
TB/5.45 TiB)
[ 1.329009] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.329214] sd 0:0:0:0: [sda] Write Protect is off
[ 1.329219] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.329250] scsi 1:0:0:0: Direct-Access ATA WDC WD60EFRX-68M 0A82
PQ: 0 ANSI: 5
[ 1.329348] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.329652] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00
TB/5.45 TiB)
[ 1.329657] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.329669] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.329782] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.329788] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.329880] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.332247] ata3.00: configured for UDMA/133
[ 1.332429] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARS-00S 0A80
PQ: 0 ANSI: 5
[ 1.332811] sd 2:0:0:0: [sdc] 3907027055 512-byte logical blocks: (2.00
TB/1.81 TiB)
[ 1.332851] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.332899] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.332905] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.332970] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.332977] ata4.00: configured for UDMA/133
[ 1.333102] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARS-00S 0A80
PQ: 0 ANSI: 5
[ 1.333464] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.333469] sd 3:0:0:0: [sdd] 3907027055 512-byte logical blocks: (2.00
TB/1.81 TiB)
[ 1.333623] sd 3:0:0:0: [sdd] Write Protect is off
[ 1.333628] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.333674] scsi 4:0:0:0: Direct-Access ATA WDC WD60EFRX-68M 0A82
PQ: 0 ANSI: 5
[ 1.333677] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.333991] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 1.334035] sd 4:0:0:0: [sde] 11721045168 512-byte logical blocks: (6.00
TB/5.45 TiB)
[ 1.334040] sd 4:0:0:0: [sde] 4096-byte physical blocks
[ 1.334180] sd 4:0:0:0: [sde] Write Protect is off
[ 1.334185] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 1.334231] scsi 5:0:0:0: Direct-Access ATA WDC WD60EFRX-68M 0A82
PQ: 0 ANSI: 5
[ 1.334233] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.334527] sd 5:0:0:0: [sdf] 11721045168 512-byte logical blocks: (6.00
TB/5.45 TiB)
[ 1.334532] sd 5:0:0:0: [sdf] 4096-byte physical blocks
[ 1.334548] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 1.334647] sd 5:0:0:0: [sdf] Write Protect is off
[ 1.334653] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 1.334768] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.335031] scsi 15:0:0:0: Processor Marvell Console 1.01
PQ: 0 ANSI: 5
[ 1.346509] ata16.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 1.346662] ata16.00: irq_stat 0x40000001
[ 1.346796] ata16.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma
16640 in
Inquiry 12 01 00 00 ff 00res
00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
[ 1.347344] ata16: hard resetting link
[ 1.350686] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.350688] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.354182] sd 5:0:0:0: [sdf] Attached SCSI disk
[ 1.355834] sd 4:0:0:0: [sde] Attached SCSI disk
[ 1.787613] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 1.788180] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.832932] ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.883536] ata16.00: configured for UDMA/66
[ 1.883621] ata16: EH complete
[ 1.883920] scsi 15:0:0:0: Attached scsi generic sg6 type 3
Have two Marvell controllers:
04:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s
Controller (rev 11)
09:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s
Controller (rev 11)
--
You are receiving this mail because:
You are watching the assignee of the bug.
next prev parent reply other threads:[~2015-08-08 23:58 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-12 22:22 [Bug 98171] New: [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly bugzilla-daemon
2015-05-12 22:22 ` [Bug 98171] " bugzilla-daemon
2015-05-12 22:28 ` [Bug 98171] New: " James Bottomley
2015-06-29 22:27 ` [Bug 98171] " bugzilla-daemon
2015-06-30 10:48 ` bugzilla-daemon
2015-06-30 10:51 ` bugzilla-daemon
2015-08-08 23:58 ` bugzilla-daemon [this message]
2016-01-19 14:33 ` bugzilla-daemon
2016-02-02 8:01 ` bugzilla-daemon
2016-02-05 16:20 ` bugzilla-daemon
2016-03-29 3:34 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-98171-11613-4XOxt2LUqe@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.