From: Jane Chu <jane.chu@oracle.com>
To: Miaohe Lin <linmiaohe@huawei.com>,
nao.horiguchi@gmail.com, akpm@linux-foundation.org,
linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/3] mm/memory-failure: send SIGBUS in the event of thp split fail
Date: Mon, 6 May 2024 13:26:19 -0700 [thread overview]
Message-ID: <c172fa3d-d4a4-4605-8f39-df0536718bd5@oracle.com> (raw)
In-Reply-To: <038cffc0-e027-b518-460f-40099819c588@huawei.com>
On 5/5/2024 12:00 AM, Miaohe Lin wrote:
> On 2024/5/2 7:24, Jane Chu wrote:
>> When handle hwpoison in a GUP longterm pin'ed thp page,
>> try_to_split_thp_page() will fail. And at this point, there is little else
>> the kernel could do except sending a SIGBUS to the user process, thus
>> give it a chance to recover.
>>
>> Signed-off-by: Jane Chu <jane.chu@oracle.com>
> Thanks for your patch. Some comments below.
>
>> ---
>> mm/memory-failure.c | 36 ++++++++++++++++++++++++++++++++++++
>> 1 file changed, 36 insertions(+)
>>
>> diff --git a/mm/memory-failure.c b/mm/memory-failure.c
>> index 7fcf182abb96..67f4d24a98e7 100644
>> --- a/mm/memory-failure.c
>> +++ b/mm/memory-failure.c
>> @@ -2168,6 +2168,37 @@ static int memory_failure_dev_pagemap(unsigned long pfn, int flags,
>> return rc;
>> }
>>
>> +/*
>> + * The calling condition is as such: thp split failed, page might have
>> + * been GUP longterm pinned, not much can be done for recovery.
>> + * But a SIGBUS should be delivered with vaddr provided so that the user
>> + * application has a chance to recover. Also, application processes'
>> + * election for MCE early killed will be honored.
>> + */
>> +static int kill_procs_now(struct page *p, unsigned long pfn, int flags,
>> + struct page *hpage)
>> +{
>> + struct folio *folio = page_folio(hpage);
>> + LIST_HEAD(tokill);
>> + int res = -EHWPOISON;
>> +
>> + /* deal with user pages only */
>> + if (PageReserved(p) || PageSlab(p) || PageTable(p) || PageOffline(p))
>> + res = -EBUSY;
>> + if (!(PageLRU(hpage) || PageHuge(p)))
>> + res = -EBUSY;
> Above checks seems unneeded. We already know it's thp?
Agreed.
I lifted these checks from hwpoison_user_mapping() with a hope to make
kill_procs_now() more generic,
such as, potentially replacing kill_accessing_processes() for
re-accessing hwpoisoned page.
But I backed out at last, due to concerns that my tests might not have
covered sufficient number of scenarios.
>
>> +
>> + if (res == -EHWPOISON) {
>> + collect_procs(folio, p, &tokill, flags & MF_ACTION_REQUIRED);
>> + kill_procs(&tokill, true, pfn, flags);
>> + }
>> +
>> + if (flags & MF_COUNT_INCREASED)
>> + put_page(p);
> This if block is broken. put_page() has been done when try_to_split_thp_page() fails?
put_page() has not been done if try_to_split_thp_page() fails, and I
think it should.
I will revise the code so that put_page() is called regardless
MF_ACTION_REQUIRED is set or not.
>
>> +
> action_result is missing?
Indeed, action_result() isn't always called, referring to the
re-accessing hwpoison scenarios.
In this case, I think the reason is that, we just killed the process
and there is nothing
else to do or to report.
>
>> + return res;
>> +}
>> +
>> /**
>> * memory_failure - Handle memory failure of a page.
>> * @pfn: Page Number of the corrupted page
>> @@ -2297,6 +2328,11 @@ int memory_failure(unsigned long pfn, int flags)
>> */
>> SetPageHasHWPoisoned(hpage);
>> if (try_to_split_thp_page(p) < 0) {
> Should hwpoison_filter() be called in this case?
Yes, it should. I will add the hwpoison_filter check.
>
>> + if (flags & MF_ACTION_REQUIRED) {
>> + pr_err("%#lx: thp split failed\n", pfn);
>> + res = kill_procs_now(p, pfn, flags, hpage);
> Can we use hwpoison_user_mappings() directly here?
I thought about using hwpoison_user_mappings() with an extra flag, but
gave up in the end.
Because most of the code there are not needed, such as the checks you
mentioned above,
and umapping etc.
thanks!
-jane
>
> Thanks.
> .
>
>> + goto unlock_mutex;
>> + }
>> res = action_result(pfn, MF_MSG_UNSPLIT_THP, MF_IGNORED);
>> goto unlock_mutex;
>> }
>>
next prev parent reply other threads:[~2024-05-06 20:26 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-01 23:24 [PATCH 0/3] Enhance soft hwpoison handling and injection Jane Chu
2024-05-01 23:24 ` [PATCH 1/3] mm/memory-failure: try to send SIGBUS even if unmap failed Jane Chu
2024-05-07 9:02 ` Oscar Salvador
2024-05-07 17:54 ` Jane Chu
2024-05-08 12:06 ` Oscar Salvador
2024-05-08 16:51 ` Jane Chu
2024-05-08 7:47 ` Miaohe Lin
2024-05-08 16:58 ` Jane Chu
2024-05-09 2:54 ` Miaohe Lin
2024-05-09 16:40 ` Jane Chu
2024-05-01 23:24 ` [PATCH 2/3] mm/madvise: Add MF_ACTION_REQUIRED to madvise(MADV_HWPOISON) Jane Chu
2024-05-05 7:02 ` Miaohe Lin
2024-05-06 19:54 ` Jane Chu
2024-05-08 7:58 ` Miaohe Lin
2024-05-01 23:24 ` [PATCH 3/3] mm/memory-failure: send SIGBUS in the event of thp split fail Jane Chu
2024-05-05 7:00 ` Miaohe Lin
2024-05-06 20:26 ` Jane Chu [this message]
2024-05-08 8:08 ` Miaohe Lin
2024-05-08 17:45 ` Jane Chu
2024-05-09 8:30 ` Miaohe Lin
2024-05-09 15:34 ` Jane Chu
2024-05-10 2:59 ` Miaohe Lin
2024-05-10 3:18 ` Jane Chu
2024-05-08 9:03 ` Miaohe Lin
2024-05-08 16:56 ` Jane Chu
2024-05-09 8:52 ` Miaohe Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c172fa3d-d4a4-4605-8f39-df0536718bd5@oracle.com \
--to=jane.chu@oracle.com \
--cc=akpm@linux-foundation.org \
--cc=linmiaohe@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=nao.horiguchi@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.