Linux2.6.11: Stop at -- Freeing init memory: 96K

[jeanwelly <jeanwelly@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 5227 bytes --]

Hi, all
    I am using 2.6.11 on S3C2410 ARM platform.
I am using NFS for test...
When booting, it stop at -- Freeing init memory: 96K  
My root filesystem is for 2.4.18, but I think it can be boot for 2.6.11

Thanks.
My .config file is attached.

-------------------------------

vivi> param set linux_cmd_line "noinitrd console=ttySAC0 init=/linuxrc
root=/de"Change linux command line to "noinitrd console=ttySAC0
init=/linuxrc root=/dev/"vivi> param save
Found block size = 0x0000c000 
Erasing... ... done 
Writing... ... done 
Written 49152 bytes 
Saved vivi private data 
vivi> boot 
Copy linux kernel from 0x00030000 to 0x30008000, size = 0x001d0000 ... done 
zImage magic = 0x016f2818 
Setup linux parameters at 0x30000100 
linux command line is: "noinitrd console=ttySAC0 init=/linuxrc
root=/dev/nfs nf"MACH_TYPE = 193
NOW, Booting Linux...... 
Uncompressing Linux.............................................................Linux
version 2.6.11 (root@localhost.localdomain) (gcc version 3.4.1) #26
Thu A5CPU: ARM920Tid(wb) [41129200] revision 0 (ARMv4T)
CPU0: D VIVT write-back cache 
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets 
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets 
Machine: SMDK2410 
ATAG_INITRD is deprecated; please update your bootloader. 
Memory policy: ECC disabled, Data cache writeback 
CPU S3C2410 (id 0x32410000) 
S3C2410: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz 
S3C2410 Clock control, (c) 2004 Simtec Electronics 
Built 1 zonelists 
Kernel command line: noinitrd console=ttySAC0 init=/linuxrc
root=/dev/nfs nfsrofirq: clearing pending ext status 00000100
irq: clearing subpending status 00000003 
irq: clearing subpending status 00000002 
PID hash table entries: 512 (order: 9, 8192 bytes) 
timer tcon=00000000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 
Console: colour dummy device 80x30 
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) 
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) 
Memory: 64MB = 64MB total 
Memory: 62336KB available (1818K code, 543K data, 96K init) 
Mount-cache hash table entries: 512 (order: 0, 4096 bytes) 
CPU: Testing write buffer coherency: ok 
NET: Registered protocol family 16 
S3C2410: Initialising architecture 
S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics 
DMA channel 0 at c4800000, irq 33 
DMA channel 1 at c4800040, irq 34 
DMA channel 2 at c4800080, irq 35 
DMA channel 3 at c48000c0, irq 36 
VFS: Disk quotas dquot_6.5.1 
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) 
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) 
devfs: devfs_debug: 0x0 
devfs: boot_options: 0x1 
Initializing Cryptographic API 
Real Time Clock Driver v1.12 
S3C2410 RTC, (c) 2004 Simtec Electronics 
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics 
s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2410 
s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2410 
s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2410 
io scheduler noop registered 
io scheduler anticipatory registered 
io scheduler deadline registered 
io scheduler cfq registered 
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize 
nbd: registered device at major 43 
Cirrus Logic CS8900A driver for Linux (Modified for SMDK2410) 
eth0: CS8900A rev E at 0xe0000300 irq=53, no eeprom , addr: 08: 0:3E:26:0A:5B 
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx 
ide-floppy driver 0.99.newide 
S3C2410 NAND Driver, (c) 2004 Simtec Electronics 
s3c2410-nand: mapped registers at c4a00000 
s3c2410-nand: timing: Tacls 10ns, Twrph0 40ns, Twrph1 10ns 
NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB
3,3V 8-bi)NAND_ECC_NONE selected by board driver. This is not
recommended !!
Scanning device for bad blocks 
Creating 5 MTD partitions on "NAND 64MiB 3,3V 8-bit": 
0x00000000-0x00020000 : "vivi" 
mtd: Giving out device 0 to vivi 
0x00020000-0x00030000 : "param" 
mtd: Giving out device 1 to param 
0x00030000-0x001f0000 : "kernel" 
mtd: Giving out device 2 to kernel 
0x00200000-0x00400000 : "root" 
mtd: Giving out device 3 to root 
0x00400000-0x04000000 : "user" 
mtd: Giving out device 4 to user 
mice: PS/2 mouse device common for all mice 
NET: Registered protocol family 2 
IP: routing cache hash table of 512 buckets, 4Kbytes 
TCP established hash table entries: 4096 (order: 3, 32768 bytes) 
TCP bind hash table entries: 4096 (order: 2, 16384 bytes) 
TCP: Hash tables configured (established 4096 bind 4096) 
NET: Registered protocol family 1 
IP-Config: Complete: 
device=eth0, addr=192.168.16.155, mask=255.255.255.0, gw=192.168.16.122, 
host=192.168.16.155, domain=, nis-domain=(none), 
bootserver=192.168.16.122, rootserver=192.168.16.122, rootpath= 
Looking up port of RPC 100003/2 on 192.168.16.122 
Looking up port of RPC 100005/1 on 192.168.16.122 
VFS: Mounted root (nfs filesystem). 
Mounted devfs on /dev 
Freeing init memory: 96K  <<<---------- Stop here.

-- 
jeanwelly
Email:  jeanwelly@gmail.com
China

[-- Attachment #2: config-linux26-050508.C --]
[-- Type: application/octet-stream, Size: 22932 bytes --]

# 
# Automatically generated make config: don't edit 
# Linux kernel version: 2.6.11 
# Thu Apr 28 18:53:38 2005 
# 
CONFIG_ARM=y 
CONFIG_MMU=y 
CONFIG_UID16=y 
CONFIG_RWSEM_GENERIC_SPINLOCK=y 
CONFIG_GENERIC_CALIBRATE_DELAY=y 
CONFIG_GENERIC_IOMAP=y 

# 
# Code maturity level options 
# 
CONFIG_EXPERIMENTAL=y 
CONFIG_CLEAN_COMPILE=y 
CONFIG_BROKEN_ON_SMP=y 

# 
# General setup 
# 
CONFIG_LOCALVERSION="" 
CONFIG_SWAP=y 
CONFIG_SYSVIPC=y 
# CONFIG_POSIX_MQUEUE is not set 
# CONFIG_BSD_PROCESS_ACCT is not set 
CONFIG_SYSCTL=y 
# CONFIG_AUDIT is not set 
CONFIG_LOG_BUF_SHIFT=14 
CONFIG_HOTPLUG=y 
CONFIG_KOBJECT_UEVENT=y 
# CONFIG_IKCONFIG is not set 
# CONFIG_EMBEDDED is not set 
CONFIG_KALLSYMS=y 
# CONFIG_KALLSYMS_ALL is not set 
# CONFIG_KALLSYMS_EXTRA_PASS is not set 
CONFIG_FUTEX=y 
CONFIG_EPOLL=y 
CONFIG_CC_OPTIMIZE_FOR_SIZE=y 
CONFIG_SHMEM=y 
CONFIG_CC_ALIGN_FUNCTIONS=0 
CONFIG_CC_ALIGN_LABELS=0 
CONFIG_CC_ALIGN_LOOPS=0 
CONFIG_CC_ALIGN_JUMPS=0 
# CONFIG_TINY_SHMEM is not set 

# 
# Loadable module support 
# 
CONFIG_MODULES=y 
CONFIG_MODULE_UNLOAD=y 
CONFIG_MODULE_FORCE_UNLOAD=y 
CONFIG_OBSOLETE_MODPARM=y 
CONFIG_MODVERSIONS=y 
# CONFIG_MODULE_SRCVERSION_ALL is not set 
CONFIG_KMOD=y 
# 
# System Type 
# 
# CONFIG_ARCH_CLPS7500 is not set 
# CONFIG_ARCH_CLPS711X is not set 
# CONFIG_ARCH_CO285 is not set 
# CONFIG_ARCH_EBSA110 is not set 
# CONFIG_ARCH_CAMELOT is not set 
# CONFIG_ARCH_FOOTBRIDGE is not set 
# CONFIG_ARCH_INTEGRATOR is not set 
# CONFIG_ARCH_IOP3XX is not set 
# CONFIG_ARCH_IXP4XX is not set 
# CONFIG_ARCH_IXP2000 is not set 
# CONFIG_ARCH_L7200 is not set 
# CONFIG_ARCH_PXA is not set 
# CONFIG_ARCH_RPC is not set 
# CONFIG_ARCH_SA1100 is not set 
CONFIG_ARCH_S3C2410=y 
# CONFIG_ARCH_SHARK is not set 
# CONFIG_ARCH_LH7A40X is not set 
# CONFIG_ARCH_OMAP is not set 
# CONFIG_ARCH_VERSATILE is not set 
# CONFIG_ARCH_IMX is not set 
# CONFIG_ARCH_H720X is not set 

# 
# S3C24XX Implementations 
# 
# CONFIG_ARCH_BAST is not set 
# CONFIG_ARCH_H1940 is not set 
CONFIG_ARCH_SMDK2410=y 
# CONFIG_MACH_VR1000 is not set 
# CONFIG_MACH_RX3715 is not set 
CONFIG_CPU_S3C2410=y 

# 
# S3C2410 Setup 
# 
CONFIG_S3C2410_DMA=y 
# CONFIG_S3C2410_DMA_DEBUG is not set 
# CONFIG_S3C2410_PM_DEBUG is not set 
# CONFIG_S3C2410_PM_CHECK is not set 
CONFIG_S3C2410_LOWLEVEL_UART_PORT=0 

# 
# Processor Type 
# 
CONFIG_CPU_32=y 
CONFIG_CPU_ARM920T=y 
CONFIG_CPU_32v4=y 
CONFIG_CPU_ABRT_EV4T=y 
CONFIG_CPU_CACHE_V4WT=y 
CONFIG_CPU_CACHE_VIVT=y 
CONFIG_CPU_COPY_V4WB=y 
CONFIG_CPU_TLB_V4WBI=y 

# 
# Processor Features 
# 
CONFIG_ARM_THUMB=y 
# CONFIG_CPU_ICACHE_DISABLE is not set 
# CONFIG_CPU_DCACHE_DISABLE is not set 
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set 

# 
# General setup 
# 
CONFIG_ZBOOT_ROM_TEXT=0x0 
CONFIG_ZBOOT_ROM_BSS=0 
# CONFIG_ZBOOT_ROM is not set 
# CONFIG_XIP_KERNEL is not set 

# 
# PCCARD (PCMCIA/CardBus) support 
# 
# CONFIG_PCCARD is not set 

# 
# PC-card bridges 
# 

# 
# At least one math emulation must be selected 
# 
# CONFIG_FPE_NWFPE is not set 
# CONFIG_FPE_FASTFPE is not set 
CONFIG_BINFMT_ELF=y 
CONFIG_BINFMT_AOUT=m 
CONFIG_BINFMT_MISC=m 

# 
# Generic Driver Options 
# 
CONFIG_STANDALONE=y 
CONFIG_PREVENT_FIRMWARE_BUILD=y 
# CONFIG_FW_LOADER is not set 
# CONFIG_DEBUG_DRIVER is not set 
CONFIG_PM=y 
# CONFIG_PREEMPT is not set 
CONFIG_APM=y 
# CONFIG_ARTHUR is not set 
CONFIG_CMDLINE="" 
CONFIG_ALIGNMENT_TRAP=y 

# 
# Parallel port support 
# 
CONFIG_PARPORT=m 
CONFIG_PARPORT_PC=m 
CONFIG_PARPORT_PC_CML1=m 
# CONFIG_PARPORT_PC_FIFO is not set 
# CONFIG_PARPORT_PC_SUPERIO is not set 
# CONFIG_PARPORT_ARC is not set 
# CONFIG_PARPORT_OTHER is not set 
CONFIG_PARPORT_1284=y 

# 
# Memory Technology Devices (MTD) 
# 
CONFIG_MTD=y 
CONFIG_MTD_DEBUG=y 
CONFIG_MTD_DEBUG_VERBOSE=0 
CONFIG_MTD_PARTITIONS=y 
# CONFIG_MTD_CONCAT is not set 
# CONFIG_MTD_REDBOOT_PARTS is not set 
# CONFIG_MTD_CMDLINE_PARTS is not set 
# CONFIG_MTD_AFS_PARTS is not set 

# 
# User Modules And Translation Layers 
# 
CONFIG_MTD_CHAR=y 
CONFIG_MTD_BLOCK=y 
# CONFIG_FTL is not set 
# CONFIG_NFTL is not set 
# CONFIG_INFTL is not set 

# 
# RAM/ROM/Flash chip drivers 
# 
CONFIG_MTD_CFI=y 
CONFIG_MTD_JEDECPROBE=y 
CONFIG_MTD_GEN_PROBE=y 
# CONFIG_MTD_CFI_ADV_OPTIONS is not set 
CONFIG_MTD_MAP_BANK_WIDTH_1=y 
CONFIG_MTD_MAP_BANK_WIDTH_2=y 
CONFIG_MTD_MAP_BANK_WIDTH_4=y 
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set 
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set 
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set 
CONFIG_MTD_CFI_I1=y 
CONFIG_MTD_CFI_I2=y 
# CONFIG_MTD_CFI_I4 is not set 
# CONFIG_MTD_CFI_I8 is not set 
# CONFIG_MTD_CFI_INTELEXT is not set 
CONFIG_MTD_CFI_AMDSTD=y 
CONFIG_MTD_CFI_AMDSTD_RETRY=0 
# CONFIG_MTD_CFI_STAA is not set 
CONFIG_MTD_CFI_UTIL=y 
# CONFIG_MTD_RAM is not set 
# CONFIG_MTD_ROM is not set 
# CONFIG_MTD_ABSENT is not set 

# 
# Mapping drivers for chip access 
# 
# CONFIG_MTD_COMPLEX_MAPPINGS is not set 
# CONFIG_MTD_PHYSMAP is not set 
# CONFIG_MTD_ARM_INTEGRATOR is not set 
# CONFIG_MTD_EDB7312 is not set 
# CONFIG_MTD_IMPA7 is not set 

# 
# Self-contained MTD device drivers 
# 
# CONFIG_MTD_SLRAM is not set 
# CONFIG_MTD_PHRAM is not set 
# CONFIG_MTD_MTDRAM is not set 
# CONFIG_MTD_BLKMTD is not set 
# CONFIG_MTD_BLOCK2MTD is not set 

# 
# Disk-On-Chip Device Drivers 
# 
# CONFIG_MTD_DOC2000 is not set 
# CONFIG_MTD_DOC2001 is not set 
# CONFIG_MTD_DOC2001PLUS is not set 

# 
# NAND Flash Device Drivers 
# 
CONFIG_MTD_NAND=y 
# CONFIG_MTD_NAND_VERIFY_WRITE is not set 
CONFIG_MTD_NAND_IDS=y 
CONFIG_MTD_NAND_S3C2410=y 
CONFIG_MTD_NAND_S3C2410_DEBUG=y 
# CONFIG_MTD_NAND_S3C2410_HWECC is not set 
# CONFIG_MTD_NAND_DISKONCHIP is not set 
# CONFIG_MTD_NAND_NANDSIM is not set 

# 
# Plug and Play support 
# 

# 
# Block devices 
# 
# CONFIG_BLK_DEV_FD is not set 
# CONFIG_PARIDE is not set 
# CONFIG_BLK_DEV_COW_COMMON is not set 
# CONFIG_BLK_DEV_LOOP is not set 
CONFIG_BLK_DEV_NBD=y 
CONFIG_BLK_DEV_RAM=y 
CONFIG_BLK_DEV_RAM_COUNT=16 
CONFIG_BLK_DEV_RAM_SIZE=4096 
CONFIG_BLK_DEV_INITRD=y 
CONFIG_INITRAMFS_SOURCE="" 
# CONFIG_CDROM_PKTCDVD is not set 

# 
# IO Schedulers 
# 
CONFIG_IOSCHED_NOOP=y 
CONFIG_IOSCHED_AS=y 
CONFIG_IOSCHED_DEADLINE=y 
CONFIG_IOSCHED_CFQ=y 
# CONFIG_ATA_OVER_ETH is not set 

# 
# Multi-device support (RAID and LVM) 
# 
# CONFIG_MD is not set 

# 
# Networking support 
# 
CONFIG_NET=y 

# 
# Networking options 
# 
# CONFIG_PACKET is not set 
# CONFIG_NETLINK_DEV is not set 
CONFIG_UNIX=y 
# CONFIG_NET_KEY is not set 
CONFIG_INET=y 
# CONFIG_IP_MULTICAST is not set 
# CONFIG_IP_ADVANCED_ROUTER is not set 
CONFIG_IP_PNP=y 
# CONFIG_IP_PNP_DHCP is not set 
CONFIG_IP_PNP_BOOTP=y 
# CONFIG_IP_PNP_RARP is not set 
# CONFIG_NET_IPIP is not set 
# CONFIG_NET_IPGRE is not set 
# CONFIG_ARPD is not set 
# CONFIG_SYN_COOKIES is not set 
# CONFIG_INET_AH is not set 
# CONFIG_INET_ESP is not set 
# CONFIG_INET_IPCOMP is not set 
# CONFIG_INET_TUNNEL is not set 
# CONFIG_IP_TCPDIAG is not set 
# CONFIG_IP_TCPDIAG_IPV6 is not set 
# CONFIG_IPV6 is not set 
# CONFIG_NETFILTER is not set 

# 
# SCTP Configuration (EXPERIMENTAL) 
# 
# CONFIG_IP_SCTP is not set 
# CONFIG_ATM is not set 
# CONFIG_BRIDGE is not set 
# CONFIG_VLAN_8021Q is not set 
# CONFIG_DECNET is not set 
# CONFIG_LLC2 is not set 
# CONFIG_IPX is not set 
# CONFIG_ATALK is not set 
# CONFIG_X25 is not set 
# CONFIG_LAPB is not set 
CONFIG_NET_DIVERT=y 
# CONFIG_ECONET is not set 
CONFIG_WAN_ROUTER=m 

# 
# QoS and/or fair queueing 
# 
CONFIG_NET_SCHED=y 
CONFIG_NET_SCH_CLK_JIFFIES=y 
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set 
# CONFIG_NET_SCH_CLK_CPU is not set 
CONFIG_NET_SCH_CBQ=m 
CONFIG_NET_SCH_HTB=m 
# CONFIG_NET_SCH_HFSC is not set 
CONFIG_NET_SCH_PRIO=m 
CONFIG_NET_SCH_RED=m 
CONFIG_NET_SCH_SFQ=m 
CONFIG_NET_SCH_TEQL=m 
CONFIG_NET_SCH_TBF=m 
CONFIG_NET_SCH_GRED=m 
CONFIG_NET_SCH_DSMARK=m 
# CONFIG_NET_SCH_NETEM is not set 
CONFIG_NET_SCH_INGRESS=m 
CONFIG_NET_QOS=y 
CONFIG_NET_ESTIMATOR=y 
CONFIG_NET_CLS=y 
CONFIG_NET_CLS_TCINDEX=m 
CONFIG_NET_CLS_ROUTE4=m 
CONFIG_NET_CLS_ROUTE=y 
CONFIG_NET_CLS_FW=m 
CONFIG_NET_CLS_U32=m 
# CONFIG_CLS_U32_PERF is not set 
# CONFIG_NET_CLS_IND is not set 
CONFIG_NET_CLS_RSVP=m 
CONFIG_NET_CLS_RSVP6=m 
# CONFIG_NET_CLS_ACT is not set 
CONFIG_NET_CLS_POLICE=y 

# 
# Network testing 
# 
# CONFIG_NET_PKTGEN is not set 
CONFIG_NETPOLL=y 
# CONFIG_NETPOLL_RX is not set 
# CONFIG_NETPOLL_TRAP is not set 
CONFIG_NET_POLL_CONTROLLER=y 
# CONFIG_HAMRADIO is not set 
CONFIG_IRDA=m 

# 
# IrDA protocols 
# 
CONFIG_IRLAN=m 
CONFIG_IRNET=m 
CONFIG_IRCOMM=m 
CONFIG_IRDA_ULTRA=y 

# 
# IrDA options 
# 
CONFIG_IRDA_CACHE_LAST_LSAP=y 
CONFIG_IRDA_FAST_RR=y 
# CONFIG_IRDA_DEBUG is not set 

# 
# Infrared-port device drivers 
# 

# 
# SIR device drivers 
# 
CONFIG_IRTTY_SIR=m 

# 
# Dongle support 
# 
CONFIG_DONGLE=y 
CONFIG_ESI_DONGLE=m 
CONFIG_ACTISYS_DONGLE=m 
CONFIG_TEKRAM_DONGLE=m 
CONFIG_LITELINK_DONGLE=m 
CONFIG_MA600_DONGLE=m 
CONFIG_GIRBIL_DONGLE=m 
CONFIG_MCP2120_DONGLE=m 
CONFIG_OLD_BELKIN_DONGLE=m 
CONFIG_ACT200L_DONGLE=m 

# 
# Old SIR device drivers 
# 
CONFIG_IRPORT_SIR=m 

# 
# Old Serial dongle support 
# 
# CONFIG_DONGLE_OLD is not set 

# 
# FIR device drivers 
# 
# CONFIG_BT is not set 
CONFIG_NETDEVICES=y 
CONFIG_DUMMY=m 
CONFIG_BONDING=m 
CONFIG_EQUALIZER=m 
CONFIG_TUN=m 

# 
# Ethernet (10 or 100Mbit) 
# 
CONFIG_NET_ETHERNET=y 
CONFIG_MII=y 
CONFIG_ARM_CS8900=y 
# CONFIG_SMC91X is not set 

# 
# Ethernet (1000 Mbit) 
# 

# 
# Ethernet (10000 Mbit) 
# 

# 
# Token Ring devices 
# 

# 
# Wireless LAN (non-hamradio) 
# 
CONFIG_NET_RADIO=y 

# 
# Obsolete Wireless cards support (pre-802.11) 
# 
CONFIG_STRIP=m 
# CONFIG_ATMEL is not set 

# 
# Wan interfaces 
# 
CONFIG_WAN=y 
# CONFIG_SYNCLINK_SYNCPPP is not set 
# CONFIG_HDLC is not set 
CONFIG_DLCI=m 
CONFIG_DLCI_COUNT=24 
CONFIG_DLCI_MAX=8 
CONFIG_WAN_ROUTER_DRIVERS=y 
CONFIG_PLIP=m 
CONFIG_PPP=m 
CONFIG_PPP_MULTILINK=y 
CONFIG_PPP_FILTER=y 
CONFIG_PPP_ASYNC=m 
CONFIG_PPP_SYNC_TTY=m 
CONFIG_PPP_DEFLATE=m 
# CONFIG_PPP_BSDCOMP is not set 
# CONFIG_PPPOE is not set 
CONFIG_SLIP=m 
CONFIG_SLIP_COMPRESSED=y 
CONFIG_SLIP_SMART=y 
CONFIG_SLIP_MODE_SLIP6=y 
CONFIG_SHAPER=m 
CONFIG_NETCONSOLE=m 

# 
# ATA/ATAPI/MFM/RLL support 
# 
CONFIG_IDE=y 
CONFIG_BLK_DEV_IDE=y 

# 
# Please see Documentation/ide.txt for help/info on IDE drives 
# 
# CONFIG_BLK_DEV_IDE_SATA is not set 
CONFIG_BLK_DEV_IDEDISK=y 
CONFIG_IDEDISK_MULTI_MODE=y 
CONFIG_BLK_DEV_IDECD=m 
CONFIG_BLK_DEV_IDETAPE=m 
CONFIG_BLK_DEV_IDEFLOPPY=y 
CONFIG_BLK_DEV_IDESCSI=m 
# CONFIG_IDE_TASK_IOCTL is not set 

# 
# IDE chipset support/bugfixes 
# 
CONFIG_IDE_GENERIC=y 
# CONFIG_IDE_ARM is not set 
# CONFIG_BLK_DEV_IDEDMA is not set 
# CONFIG_IDEDMA_AUTO is not set 
# CONFIG_BLK_DEV_HD is not set 

# 
# SCSI device support 
# 
CONFIG_SCSI=m 
CONFIG_SCSI_PROC_FS=y 

# 
# SCSI support type (disk, tape, CD-ROM) 
# 
CONFIG_BLK_DEV_SD=m 
CONFIG_CHR_DEV_ST=m 
CONFIG_CHR_DEV_OSST=m 
CONFIG_BLK_DEV_SR=m 
CONFIG_BLK_DEV_SR_VENDOR=y 
CONFIG_CHR_DEV_SG=m 

# 
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs 
# 
# CONFIG_SCSI_MULTI_LUN is not set 
CONFIG_SCSI_CONSTANTS=y 
CONFIG_SCSI_LOGGING=y 

# 
# SCSI Transport Attributes 
# 
CONFIG_SCSI_SPI_ATTRS=m 
# CONFIG_SCSI_FC_ATTRS is not set 
# CONFIG_SCSI_ISCSI_ATTRS is not set 

# 
# SCSI low-level drivers 
# 
# CONFIG_SCSI_SATA is not set 
CONFIG_SCSI_PPA=m 
CONFIG_SCSI_IMM=m 
# CONFIG_SCSI_IZIP_EPP16 is not set 
# CONFIG_SCSI_IZIP_SLOW_CTR is not set 
CONFIG_SCSI_DEBUG=m 

# 
# Fusion MPT device support 
# 

# 
# IEEE 1394 (FireWire) support 
# 

# 
# I2O device support 
# 

# 
# ISDN subsystem 
# 
CONFIG_ISDN=m 

# 
# Old ISDN4Linux 
# 
# CONFIG_ISDN_I4L is not set 

# 
# CAPI subsystem 
# 
CONFIG_ISDN_CAPI=m 
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y 
CONFIG_ISDN_CAPI_MIDDLEWARE=y 
CONFIG_ISDN_CAPI_CAPI20=m 
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y 
CONFIG_ISDN_CAPI_CAPIFS=m 

# 
# CAPI hardware drivers 
# 

# 
# Active AVM cards 
# 
# CONFIG_CAPI_AVM is not set 

# 
# Active Eicon DIVA Server cards 
# 
# CONFIG_CAPI_EICON is not set 

# 
# Input device support 
# 
CONFIG_INPUT=y 

# 
# Userland interfaces 
# 
CONFIG_INPUT_MOUSEDEV=y 
CONFIG_INPUT_MOUSEDEV_PSAUX=y 
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 
CONFIG_INPUT_JOYDEV=m 
# CONFIG_INPUT_TSDEV is not set 
CONFIG_INPUT_EVDEV=m 
# CONFIG_INPUT_EVBUG is not set 

# 
# Input I/O drivers 
# 
# CONFIG_GAMEPORT is not set 
CONFIG_SOUND_GAMEPORT=y 
CONFIG_SERIO=y 
CONFIG_SERIO_SERPORT=y 
# CONFIG_SERIO_CT82C710 is not set 
# CONFIG_SERIO_PARKBD is not set 
CONFIG_SERIO_LIBPS2=y 
# CONFIG_SERIO_RAW is not set 

# 
# Input Device Drivers 
# 
CONFIG_INPUT_KEYBOARD=y 
CONFIG_KEYBOARD_ATKBD=y 
# CONFIG_KEYBOARD_SUNKBD is not set 
# CONFIG_KEYBOARD_LKKBD is not set 
# CONFIG_KEYBOARD_XTKBD is not set 
# CONFIG_KEYBOARD_NEWTON is not set 
CONFIG_INPUT_MOUSE=y 
CONFIG_MOUSE_PS2=y 
# CONFIG_MOUSE_SERIAL is not set 
# CONFIG_MOUSE_VSXXXAA is not set 
# CONFIG_INPUT_JOYSTICK is not set 
# CONFIG_INPUT_TOUCHSCREEN is not set 
# CONFIG_INPUT_MISC is not set 

# 
# Character devices 
# 
CONFIG_VT=y 
CONFIG_VT_CONSOLE=y 
CONFIG_HW_CONSOLE=y 
CONFIG_SERIAL_NONSTANDARD=y 
CONFIG_COMPUTONE=m 
CONFIG_ROCKETPORT=m 
CONFIG_CYCLADES=m 
# CONFIG_CYZ_INTR is not set 
CONFIG_DIGIEPCA=m 
CONFIG_MOXA_INTELLIO=m 
CONFIG_MOXA_SMARTIO=m 
CONFIG_ISI=m 
# CONFIG_SYNCLINKMP is not set 
CONFIG_N_HDLC=m 
CONFIG_RISCOM8=m 
CONFIG_SPECIALIX=m 
CONFIG_SPECIALIX_RTSCTS=y 
CONFIG_SX=m 
# CONFIG_RIO is not set 
CONFIG_STALDRV=y 
CONFIG_STALLION=m 
CONFIG_ISTALLION=m 

# 
# Serial drivers 
# 
CONFIG_SERIAL_8250=m 
CONFIG_SERIAL_8250_NR_UARTS=4 
# CONFIG_SERIAL_8250_EXTENDED is not set 

# 
# Non-8250 serial port support 
# 
CONFIG_SERIAL_S3C2410=y 
CONFIG_SERIAL_S3C2410_CONSOLE=y 
CONFIG_SERIAL_CORE=y 
CONFIG_SERIAL_CORE_CONSOLE=y 
CONFIG_UNIX98_PTYS=y 
CONFIG_LEGACY_PTYS=y 
CONFIG_LEGACY_PTY_COUNT=256 
CONFIG_PRINTER=m 
CONFIG_LP_CONSOLE=y 
CONFIG_PPDEV=m 
CONFIG_TIPAR=m 

# 
# IPMI 
# 
# CONFIG_IPMI_HANDLER is not set 

# 
# Watchdog Cards 
# 
CONFIG_WATCHDOG=y 
# CONFIG_WATCHDOG_NOWAYOUT is not set 

# 
# Watchdog Device Drivers 
# 
CONFIG_SOFT_WATCHDOG=m 
CONFIG_S3C2410_WATCHDOG=y 
CONFIG_NVRAM=m 
CONFIG_RTC=y 
CONFIG_S3C2410_RTC=y 
CONFIG_DTLK=m 
CONFIG_R3964=m 

# 
# Ftape, the floppy tape device driver 
# 
CONFIG_DRM=m 
CONFIG_DRM_TDFX=m 
# CONFIG_RAW_DRIVER is not set 

# 
# I2C support 
# 
CONFIG_I2C=m 
CONFIG_I2C_CHARDEV=m 

# 
# I2C Algorithms 
# 
CONFIG_I2C_ALGOBIT=m 
CONFIG_I2C_ALGOPCF=m 
# CONFIG_I2C_ALGOPCA is not set 

# 
# I2C Hardware Bus support 
# 
CONFIG_I2C_ISA=m 
CONFIG_I2C_PARPORT=m 
# CONFIG_I2C_PARPORT_LIGHT is not set 
# CONFIG_I2C_S3C2410 is not set 
# CONFIG_I2C_STUB is not set 
# CONFIG_I2C_PCA_ISA is not set 

# 
# Hardware Sensors Chip support 
# 
CONFIG_I2C_SENSOR=m 
CONFIG_SENSORS_ADM1021=m 
CONFIG_SENSORS_ADM1025=m 
# CONFIG_SENSORS_ADM1026 is not set 
# CONFIG_SENSORS_ADM1031 is not set 
# CONFIG_SENSORS_ASB100 is not set 
CONFIG_SENSORS_DS1621=m 
# CONFIG_SENSORS_FSCHER is not set 
CONFIG_SENSORS_GL518SM=m 
CONFIG_SENSORS_IT87=m 
# CONFIG_SENSORS_LM63 is not set 
CONFIG_SENSORS_LM75=m 
# CONFIG_SENSORS_LM77 is not set 
CONFIG_SENSORS_LM78=m 
CONFIG_SENSORS_LM80=m 
# CONFIG_SENSORS_LM83 is not set 
# CONFIG_SENSORS_LM85 is not set 
CONFIG_SENSORS_LM87=m 
# CONFIG_SENSORS_LM90 is not set 
# CONFIG_SENSORS_MAX1619 is not set 
# CONFIG_SENSORS_PC87360 is not set 
# CONFIG_SENSORS_SMSC47B397 is not set 
CONFIG_SENSORS_SMSC47M1=m 
CONFIG_SENSORS_W83781D=m 
# CONFIG_SENSORS_W83L785TS is not set 
# CONFIG_SENSORS_W83627HF is not set 

# 
# Other I2C Chip support 
# 
CONFIG_SENSORS_EEPROM=m 
CONFIG_SENSORS_PCF8574=m 
CONFIG_SENSORS_PCF8591=m 
# CONFIG_SENSORS_RTC8564 is not set 
# CONFIG_I2C_DEBUG_CORE is not set 
# CONFIG_I2C_DEBUG_ALGO is not set 
# CONFIG_I2C_DEBUG_BUS is not set 
# CONFIG_I2C_DEBUG_CHIP is not set 

# 
# Multimedia devices 
# 
# CONFIG_VIDEO_DEV is not set 

# 
# Digital Video Broadcasting Devices 
# 
# CONFIG_DVB is not set 

# 
# File systems 
# 
CONFIG_EXT2_FS=y 
# CONFIG_EXT2_FS_XATTR is not set 
CONFIG_EXT3_FS=m 
CONFIG_EXT3_FS_XATTR=y 
CONFIG_EXT3_FS_POSIX_ACL=y 
# CONFIG_EXT3_FS_SECURITY is not set 
CONFIG_JBD=m 
# CONFIG_JBD_DEBUG is not set 
CONFIG_FS_MBCACHE=y 
CONFIG_REISERFS_FS=m 
# CONFIG_REISERFS_CHECK is not set 
CONFIG_REISERFS_PROC_INFO=y 
# CONFIG_REISERFS_FS_XATTR is not set 
# CONFIG_JFS_FS is not set 
CONFIG_FS_POSIX_ACL=y 

# 
# XFS support 
# 
# CONFIG_XFS_FS is not set 
CONFIG_MINIX_FS=m 
CONFIG_ROMFS_FS=y 
CONFIG_QUOTA=y 
# CONFIG_QFMT_V1 is not set 
CONFIG_QFMT_V2=y 
CONFIG_QUOTACTL=y 
CONFIG_DNOTIFY=y 
# CONFIG_AUTOFS_FS is not set 
CONFIG_AUTOFS4_FS=y 

# 
# CD-ROM/DVD Filesystems 
# 
CONFIG_ISO9660_FS=m 
CONFIG_JOLIET=y 
CONFIG_ZISOFS=y 
CONFIG_ZISOFS_FS=m 
CONFIG_UDF_FS=m 
CONFIG_UDF_NLS=y 

# 
# DOS/FAT/NT Filesystems 
# 
CONFIG_FAT_FS=y 
CONFIG_MSDOS_FS=y 
CONFIG_VFAT_FS=y 
CONFIG_FAT_DEFAULT_CODEPAGE=437 
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" 
# CONFIG_NTFS_FS is not set 

# 
# Pseudo filesystems 
# 
CONFIG_PROC_FS=y 
CONFIG_SYSFS=y 
CONFIG_DEVFS_FS=y 
CONFIG_DEVFS_MOUNT=y 
CONFIG_DEVFS_DEBUG=y 
# CONFIG_DEVPTS_FS_XATTR is not set 
CONFIG_TMPFS=y 
# CONFIG_TMPFS_XATTR is not set 
# CONFIG_HUGETLB_PAGE is not set 
CONFIG_RAMFS=y 

# 
# Miscellaneous filesystems 
# 
# CONFIG_ADFS_FS is not set 
# CONFIG_AFFS_FS is not set 
CONFIG_HFS_FS=m 
# CONFIG_HFSPLUS_FS is not set 
CONFIG_BEFS_FS=m 
# CONFIG_BEFS_DEBUG is not set 
CONFIG_BFS_FS=m 
# CONFIG_EFS_FS is not set 
# CONFIG_JFFS_FS is not set 
# CONFIG_JFFS2_FS is not set 
CONFIG_CRAMFS=y 
CONFIG_YAFFS=y 
CONFIG_VXFS_FS=m 
# CONFIG_HPFS_FS is not set 
# CONFIG_QNX4FS_FS is not set 
CONFIG_SYSV_FS=m 
CONFIG_UFS_FS=m 
# CONFIG_UFS_FS_WRITE is not set 

# 
# Network File Systems 
# 
CONFIG_NFS_FS=y 
CONFIG_NFS_V3=y 
# CONFIG_NFS_V4 is not set 
CONFIG_NFS_DIRECTIO=y 
# CONFIG_NFSD is not set 
CONFIG_ROOT_NFS=y 
CONFIG_LOCKD=y 
CONFIG_LOCKD_V4=y 
CONFIG_SUNRPC=y 
CONFIG_SUNRPC_GSS=y 
CONFIG_RPCSEC_GSS_KRB5=y 
# CONFIG_RPCSEC_GSS_SPKM3 is not set 
# CONFIG_SMB_FS is not set 
# CONFIG_CIFS is not set 
# CONFIG_NCP_FS is not set 
# CONFIG_CODA_FS is not set 
# CONFIG_AFS_FS is not set 

# 
# Partition Types 
# 
CONFIG_PARTITION_ADVANCED=y 
# CONFIG_ACORN_PARTITION is not set 
# CONFIG_OSF_PARTITION is not set 
# CONFIG_AMIGA_PARTITION is not set 
# CONFIG_ATARI_PARTITION is not set 
# CONFIG_MAC_PARTITION is not set 
# CONFIG_MSDOS_PARTITION is not set 
# CONFIG_LDM_PARTITION is not set 
# CONFIG_SGI_PARTITION is not set 
# CONFIG_ULTRIX_PARTITION is not set 
# CONFIG_SUN_PARTITION is not set 
# CONFIG_EFI_PARTITION is not set 

# 
# Native Language Support 
# 
CONFIG_NLS=y 
CONFIG_NLS_DEFAULT="iso8859-1" 
CONFIG_NLS_CODEPAGE_437=y 
CONFIG_NLS_CODEPAGE_737=m 
CONFIG_NLS_CODEPAGE_775=m 
CONFIG_NLS_CODEPAGE_850=m 
CONFIG_NLS_CODEPAGE_852=m 
CONFIG_NLS_CODEPAGE_855=m 
CONFIG_NLS_CODEPAGE_857=m 
CONFIG_NLS_CODEPAGE_860=m 
CONFIG_NLS_CODEPAGE_861=m 
CONFIG_NLS_CODEPAGE_862=m 
CONFIG_NLS_CODEPAGE_863=m 
CONFIG_NLS_CODEPAGE_864=m 
CONFIG_NLS_CODEPAGE_865=m 
CONFIG_NLS_CODEPAGE_866=m 
CONFIG_NLS_CODEPAGE_869=m 
CONFIG_NLS_CODEPAGE_936=y 
CONFIG_NLS_CODEPAGE_950=m 
CONFIG_NLS_CODEPAGE_932=m 
CONFIG_NLS_CODEPAGE_949=m 
CONFIG_NLS_CODEPAGE_874=m 
CONFIG_NLS_ISO8859_8=m 
CONFIG_NLS_CODEPAGE_1250=m 
CONFIG_NLS_CODEPAGE_1251=m 
# CONFIG_NLS_ASCII is not set 
CONFIG_NLS_ISO8859_1=y 
CONFIG_NLS_ISO8859_2=m 
CONFIG_NLS_ISO8859_3=m 
CONFIG_NLS_ISO8859_4=m 
CONFIG_NLS_ISO8859_5=m 
CONFIG_NLS_ISO8859_6=m 
CONFIG_NLS_ISO8859_7=m 
CONFIG_NLS_ISO8859_9=m 
CONFIG_NLS_ISO8859_13=m 
CONFIG_NLS_ISO8859_14=m 
CONFIG_NLS_ISO8859_15=m 
CONFIG_NLS_KOI8_R=m 
CONFIG_NLS_KOI8_U=m 
CONFIG_NLS_UTF8=m 

# 
# Profiling support 
# 
# CONFIG_PROFILING is not set 

# 
# Graphics support 
# 
# CONFIG_FB is not set 

# 
# Console display driver support 
# 
# CONFIG_VGA_CONSOLE is not set 
CONFIG_DUMMY_CONSOLE=y 

# 
# Sound 
# 
# CONFIG_SOUND is not set 

# 
# Misc devices 
# 

# 
# USB support 
# 
# CONFIG_USB is not set 
CONFIG_USB_ARCH_HAS_HCD=y 
# CONFIG_USB_ARCH_HAS_OHCI is not set 

# 
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information 
# 

# 
# USB Gadget Support 
# 
# CONFIG_USB_GADGET is not set 

# 
# MMC/SD Card support 
# 
# CONFIG_MMC is not set 

# 
# Kernel hacking 
# 
CONFIG_DEBUG_KERNEL=y 
CONFIG_MAGIC_SYSRQ=y 
# CONFIG_SCHEDSTATS is not set 
# CONFIG_DEBUG_SLAB is not set 
# CONFIG_DEBUG_SPINLOCK is not set 
# CONFIG_DEBUG_KOBJECT is not set 
CONFIG_DEBUG_BUGVERBOSE=y 
# CONFIG_DEBUG_INFO is not set 
# CONFIG_DEBUG_FS is not set 
CONFIG_FRAME_POINTER=y 
# CONFIG_DEBUG_USER is not set 
# CONFIG_DEBUG_WAITQ is not set 
# CONFIG_DEBUG_ERRORS is not set 
# CONFIG_DEBUG_LL is not set 
CONFIG_DEBUG_S3C2410_UART=0 

# 
# Security options 
# 
# CONFIG_KEYS is not set 
# CONFIG_SECURITY is not set 

# 
# Cryptographic options 
# 
CONFIG_CRYPTO=y 
# CONFIG_CRYPTO_HMAC is not set 
# CONFIG_CRYPTO_NULL is not set 
# CONFIG_CRYPTO_MD4 is not set 
CONFIG_CRYPTO_MD5=y 
# CONFIG_CRYPTO_SHA1 is not set 
# CONFIG_CRYPTO_SHA256 is not set 
# CONFIG_CRYPTO_SHA512 is not set 
# CONFIG_CRYPTO_WP512 is not set 
CONFIG_CRYPTO_DES=y 
# CONFIG_CRYPTO_BLOWFISH is not set 
# CONFIG_CRYPTO_TWOFISH is not set 
# CONFIG_CRYPTO_SERPENT is not set 
# CONFIG_CRYPTO_AES is not set 
# CONFIG_CRYPTO_CAST5 is not set 
# CONFIG_CRYPTO_CAST6 is not set 
# CONFIG_CRYPTO_TEA is not set 
# CONFIG_CRYPTO_ARC4 is not set 
# CONFIG_CRYPTO_KHAZAD is not set 
# CONFIG_CRYPTO_ANUBIS is not set 
# CONFIG_CRYPTO_DEFLATE is not set 
# CONFIG_CRYPTO_MICHAEL_MIC is not set 
# CONFIG_CRYPTO_CRC32C is not set 
# CONFIG_CRYPTO_TEST is not set 

# 
# Hardware crypto devices 
# 

# 
# Library routines 
# 
CONFIG_CRC_CCITT=m 
CONFIG_CRC32=y 
# CONFIG_LIBCRC32C is not set 
CONFIG_ZLIB_INFLATE=y 
CONFIG_ZLIB_DEFLATE=m