From: Martin Petzold <martin.petzold@tavla.de>
To: James Prestwood <prestwoj@gmail.com>
Cc: iwd@lists.linux.dev, Denis Kenzior <denkenz@gmail.com>,
Arend van Spriel <arend.vanspriel@broadcom.com>
Subject: Re: IWD 1.27 with brcmfmac not working for roaming
Date: Wed, 23 Oct 2024 14:19:36 +0200 [thread overview]
Message-ID: <c2c8262e-9a40-4e2f-aa50-458373639dcb@tavla.de> (raw)
In-Reply-To: <77fc14d0-96bc-465c-b425-111ba4310c86@gmail.com>
Hi James,
Am 23.10.24 um 14:13 schrieb James Prestwood:
> Hi Martin,
>
> On 10/23/24 5:02 AM, Martin Petzold wrote:
>> Hi Arend and James,
>>
>> Am 21.10.24 um 20:26 schrieb Arend van Spriel:
>>> On 10/21/2024 7:40 PM, Denis Kenzior wrote:
>>>> Hi Arend,
>>>>
>>>>>
>>>>> I have not seen patches for OWE in brcmfmac. Looking at the
>>>>> supported ciphers:
>>>>
>>>> OWE is an AKM. It still uses CCMP/CMAC underneath.
>>>
>>> My bad. Always confused by those concepts.
>>>
>>>>>
>>>>> Supported Ciphers:
>>>>> * WEP40 (00-0f-ac:1)
>>>>> * WEP104 (00-0f-ac:5)
>>>>> * TKIP (00-0f-ac:2)
>>>>> * CCMP-128 (00-0f-ac:4)
>>>>> * CMAC (00-0f-ac:6)
>>>>>
>>>>> The error message seems to match with the above.
>>>>
>>>> I've never seen support for OWE in brcmfmac mentioned. OWE
>>>> requires CMD_AUTHENTICATE / CMD_ASSOCIATE (or CMD_EXTERNAL_AUTH) to
>>>> derive the PMK, so iwd can't support it on FullMAC.
>>>
>>> I have never seen any mention of OWE either. Regarding
>>> CMD_EXTERNAL_AUTH support I recently posted patches on
>>> linux-wireless list as RFT. There has been zero feedback and so I
>>> assume also zero interest. In order to use CMD_EXTERNAL_AUTH the
>>> firmware needs to advertise "sae_ext" in fwcap debugfs file. So if
>>> Martin can check that, ie:
>>>
>>> $ grep sae_ext /sys/kernel/debug/ieee80211/phy0/fwcap
>>>
>>>
>> @James: Could please check the logs (PATCH WAS APPLIED):
>>
>> A. Initial boot and connect (device remained connected)
>
> On this run I'm seeing an agent connecting and issuing an explicit
> connect call rather than IWD autoconnecting. This is fine, and will
> create a new .open profile.
>
> Okt 23 12:39:35 tavla iwd[383]: src/agent.c:agent_free() agent free
> 0xaaaadbf376a0
> Okt 23 12:39:35 tavla iwd[383]: src/agent.c:agent_register() agent
> register called
> Okt 23 12:39:35 tavla iwd[383]: src/agent.c:agent_register() agent
> :1.69 path /agent/1420
> Okt 23 12:39:35 tavla iwd[383]: src/network.c:network_connect()
>
>> B. Reboot -> device does NOT connect
>
> This tells me you have no profile in /var/lib/iwd
>
>>
>> -----
>>
>> tavla@tavla:~$ sudo ls -l /system/var/lib/iwd/
>> insgesamt 4
>> -rw------- 1 root root 0 23. Okt 12:39 XYZ-Gast.open
>> drwx------ 2 root root 4096 4. Apr 2024 hotspot
>> tavla@tavla:~$ sudo cat /system/var/lib/iwd/XYZ-Gast.open
>> tavla@tavla:~$
>
> IWD is looking in /var/lib/iwd as seen by:
>
> Okt 23 12:35:58 tavla iwd[383]: src/storage.c:storage_create_dirs()
> Using state directory /var/lib/iwd
>
> Not sure if you have /system/var/lib/iwd mounted there or what, but it
> seems IWD cannot find that profile. IWD will not autoconnect to a
> random open network without a profile. On your first boot you are
> forcing a connection which should generate a profile, but on the
> second boot no profile exists. So that is where I could check, where
> is the profile going? can you "ls" that directory on the _second_ boot
> to see if it exists?
-----
tavla@tavla:~$ sudo ls -l /var/lib/iwd/
insgesamt 4
-rw------- 1 root root 0 23. Okt 12:39 XYZ-Gast.open
drwx------ 2 root root 4096 4. Apr 2024 hotspot
tavla@tavla:~$ sudo ls -l /system/var/lib/iwd/
insgesamt 4
-rw------- 1 root root 0 23. Okt 12:39 XYZ-Gast.open
drwx------ 2 root root 4096 4. Apr 2024 hotspot
tavla@tavla:~$ sudo cat /system/var/lib/iwd/XYZ-Gast.open
tavla@tavla:~$
tavla@tavla:~$
tavla@tavla:~$ iwctl known-networks list
Known Networks
--------------------------------------------------------------------------------
Name Security Hidden Last connected
--------------------------------------------------------------------------------
XYZ-Gast open Oct 23,
11:39 AM
tavla@tavla:~$ iwctl known-networks XYZ-Gast show
Known Network: XYZ-Gast
--------------------------------------------------------------------------------
Settable Property Value
--------------------------------------------------------------------------------
Name XYZ-Gast
Hidden
* AutoConnect yes
tavla@tavla:~$
tavla@tavla:~$ iwctl station wlan0 show
Station: wlan0
--------------------------------------------------------------------------------
Settable Property Value
--------------------------------------------------------------------------------
Scanning no
State disconnected
-----
>
>>
>> -----
>>
>> @Arend: Here the requested output (debugging enabled; PATCHES ALREADY
>> APPLIED!).
>>
>> -----
>>
>> tavla@tavla:~$ sudo cat /sys/kernel/debug/ieee80211/phy0/fwcap
>> ap
>> sta
>> wme
>> 802.11d
>> 802.11h
>> rm
>> cqa
>> ccx
>> cac
>> dualband
>> ampdu
>> ampdu_tx
>> ampdu_rx
>> amsdurx
>> amsdutx
>> radio_pwrsave
>> btamp
>> p2p
>> proptxstatus
>> mchan
>> vht-prop-rates
>> p2po
>> anqpo
>> txpwrcache
>> stbc-tx
>> stbc-rx-1ss
>>
>> -----
>>
>> Best regards,
>>
>> Martin
next prev parent reply other threads:[~2024-10-23 12:19 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-09 9:43 IWD 1.27 with brcmfmac not working for roaming Martin Petzold
2024-10-09 16:07 ` Denis Kenzior
2024-10-09 16:50 ` Arend Van Spriel
2024-10-09 17:54 ` Martin Petzold
2024-10-10 8:06 ` Martin Petzold
2024-10-12 11:06 ` Martin Petzold
2024-10-12 11:51 ` Arend van Spriel
2024-10-13 15:43 ` Martin Petzold
2024-10-30 19:19 ` Martin Petzold
2024-10-30 19:23 ` James Prestwood
2024-10-09 16:58 ` Arend Van Spriel
2024-10-10 13:20 ` Martin Petzold
2024-10-10 13:36 ` James Prestwood
2024-10-10 13:47 ` Martin Petzold
2024-10-10 13:55 ` James Prestwood
2024-10-11 8:35 ` Martin Petzold
2024-10-11 10:46 ` Martin Petzold
2024-10-12 10:59 ` Martin Petzold
2024-10-15 14:43 ` Martin Petzold
2024-10-15 15:17 ` Denis Kenzior
2024-10-15 19:13 ` Arend van Spriel
2024-10-16 2:04 ` Denis Kenzior
2024-10-16 8:32 ` Arend van Spriel
2024-10-17 10:58 ` Martin Petzold
2024-10-19 14:04 ` Martin Petzold
2024-10-19 14:41 ` Denis Kenzior
2024-10-21 13:34 ` Martin Petzold
2024-10-21 14:40 ` Arend Van Spriel
2024-10-21 14:53 ` Martin Petzold
2024-10-21 15:23 ` James Prestwood
2024-10-21 17:08 ` Arend Van Spriel
2024-10-21 17:20 ` Martin Petzold
2024-10-21 17:40 ` Denis Kenzior
2024-10-21 18:26 ` Arend van Spriel
2024-10-21 18:45 ` Martin Petzold
2024-10-21 18:48 ` Martin Petzold
2024-10-21 18:55 ` Denis Kenzior
2024-10-21 19:08 ` Jeremy Blum
2024-10-22 15:26 ` Denis Kenzior
2024-10-22 16:38 ` Jeremy Blum
2024-10-21 19:15 ` Martin Petzold
2024-10-21 19:11 ` James Prestwood
2024-10-21 20:23 ` Martin Petzold
2024-10-22 6:08 ` Arend Van Spriel
2024-10-21 22:01 ` KeithG
2024-10-21 22:10 ` Martin Petzold
2024-10-22 17:40 ` James Prestwood
2024-10-22 18:04 ` Martin Petzold
2024-10-22 18:21 ` Martin Petzold
2024-10-22 18:24 ` James Prestwood
2024-10-22 18:32 ` Martin Petzold
2024-10-22 18:44 ` Denis Kenzior
2024-10-22 18:47 ` Martin Petzold
2024-10-22 19:10 ` James Prestwood
2024-10-22 18:47 ` James Prestwood
2024-10-22 18:49 ` Martin Petzold
2024-10-22 18:52 ` Denis Kenzior
2024-10-23 12:02 ` Martin Petzold
2024-10-23 12:13 ` James Prestwood
2024-10-23 12:19 ` Martin Petzold [this message]
2024-10-23 13:22 ` James Prestwood
2024-10-23 13:34 ` Martin Petzold
2024-10-23 15:22 ` Martin Petzold
2024-10-23 15:27 ` Martin Petzold
2024-10-23 15:30 ` James Prestwood
2024-10-23 15:37 ` Martin Petzold
2024-10-23 15:28 ` James Prestwood
2024-10-23 15:11 ` Arend Van Spriel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c2c8262e-9a40-4e2f-aa50-458373639dcb@tavla.de \
--to=martin.petzold@tavla.de \
--cc=arend.vanspriel@broadcom.com \
--cc=denkenz@gmail.com \
--cc=iwd@lists.linux.dev \
--cc=prestwoj@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.