From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0002002]: No SPDIF/OUT device on ICH2
Date: Fri, 7 Apr 2006 19:24:41 +0200 [thread overview]
Message-ID: <c560049d8a9345ed212694dac21aa336@bugtrack.alsa-project.org> (raw)
The following issue has been RESOLVED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2002>
======================================================================
Reported By: Raymond
Assigned To: tiwai
======================================================================
Project: ALSA - driver
Issue ID: 2002
Category: PCI - intel8x0
Reproducibility: always
Severity: block
Priority: normal
Status: resolved
Distribution: Fedore Core 1
Kernel Version: 2.4.22-1.2199.nptl
Resolution: not an issue
Fixed in Version:
======================================================================
Date Submitted: 04-05-2006 04:00 CEST
Last Modified: 04-07-2006 19:24 CEST
======================================================================
Summary: No SPDIF/OUT device on ICH2
Description:
Do intel8x0 support SPDIF/OUT for ICH2 ?
00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio
(rev 12)
Subsystem: Asustek Computer, Inc.: Unknown device 8072
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at a800 [size=256]
I/O ports at a400 [size=64]
cat /proc/asound/pcm
01-01: Intel ICH - MIC ADC : Intel 82801BA-ICH2 - MIC ADC : capture 1
01-00: Intel ICH : Intel 82801BA-ICH2 : playback 1 : capture 1
cat /proc/asound/I82801BAICH2/codec97#0/ac97#0-0
0-0/0: Realtek ALC200,200P rev 0
PCI Subsys Vendor: 0x1043
PCI Subsys Device: 0x8072
Capabilities : -headphone out-
DAC resolution : 18-bit
ADC resolution : 18-bit
3D enhancement : Realtek 3D Stereo Enhancement
Current setup
Mic gain : +0dB [+0dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : off
Loudness : off
Mono output : MIX
Mic select : Mic1
ADC/DAC loopback : off
Extended ID : codec=0 rev=1 AMAP DSA=0 SPDIF VRA
Extended status : SPCV SPDIF=7/8 VRA
PCM front DAC : 48000Hz
PCM ADC : 48000Hz
SPDIF Control : Consumer PCM Category=0x2 Generation=1 Rate=48kHz
amixer -c 1 controls
numid=32,iface=MIXER,name='IEC958 Playback Con Mask'
numid=33,iface=MIXER,name='IEC958 Playback Pro Mask'
numid=36,iface=MIXER,name='IEC958 Playback AC97-SPSA'
numid=34,iface=MIXER,name='IEC958 Playback Default'
numid=35,iface=MIXER,name='IEC958 Playback Switch'
======================================================================
----------------------------------------------------------------------
tiwai - 04-07-06 19:24
----------------------------------------------------------------------
There is no dedicated PCM for SPDIF on ICH2.
Set up 'IEC958 AC97-SPSA' to 0 and turn on 'IEC958 Playback Switch'.
Issue History
Date Modified Username Field Change
======================================================================
04-05-06 04:00 Raymond New Issue
04-05-06 04:00 Raymond Distribution => Fedore Core 1
04-05-06 04:00 Raymond Kernel Version => 2.4.22-1.2199.nptl
04-07-06 19:24 tiwai Status new => resolved
04-07-06 19:24 tiwai Resolution open => not an issue
04-07-06 19:24 tiwai Assigned To => tiwai
04-07-06 19:24 tiwai Note Added: 0009147
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
next reply other threads:[~2006-04-07 17:24 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-04-07 17:24 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-04-05 2:00 [ALSA - driver 0002002]: No SPDIF/OUT device on ICH2 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c560049d8a9345ed212694dac21aa336@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.