From: jy <jy454@yahoo.fr>
To: cpufreq@www.linux.org.uk
Subject: Re: Acer Aspire 1350 broken PST
Date: Fri, 16 Apr 2004 17:00:10 +0200 [thread overview]
Message-ID: <c5osds$fed$1@sea.gmane.org> (raw)
In-Reply-To: <20040416120519.GT8953@poupinou.org>
Bruno Ducrot wrote:
> On Fri, Apr 16, 2004 at 12:00:58AM +0200, jy wrote:
>
>>I have Acer Aspire 1357LMi laptop with AMD Athlon XP 3000+ and of course
>>cpufreq don't work
>>
>
>
> Could you please try latest cpufreq? it's at
> http://www.codemonkey.org.uk/projects/bitkeeper/cpufreq/
>
> with CONFIG_ACPI_PROCESSOR=YES ?
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
powernow: FSB: 48.270 MHz
powernow: Found PSB header at c00f06f0
powernow: Table version: 0x12
powernow: Flags: 0x0 (Mobile voltage regulator)
powernow: Settling Time: 100 microseconds.
powernow: Has 8 PST tables. (Only dumping ones relevant to this CPU).
powernow: No PST tables match this cpuid (0x7a0)
powernow: This is indicative of a broken BIOS.
powernow: Trying ACPI perflib
powernow: acpi: P0: 2200 MHz 75000 mW 125 uS control 00d058fb SGTC 13334
powernow: FID: 0x1b (16.5x [796MHz]) VID: 0x7 (1.650V)
powernow: acpi: P1: 1800 MHz 55000 mW 125 uS control 00d05935 SGTC 13334
powernow: FID: 0x15 (13.5x [651MHz]) VID: 0x9 (1.550V)
powernow: acpi: P2: 1467 MHz 32000 mW 125 uS control 00d059c0 SGTC 13334
powernow: FID: 0x0 (11.0x [530MHz]) VID: 0xe (1.300V)
powernow: acpi: P3: 1064 MHz 30000 mW 125 uS control 00d059ca SGTC 13334
powernow: FID: 0xa (8.0x [386MHz]) VID: 0xe (1.300V)
powernow: acpi: P4: 800 MHz 26000 mW 125 uS control 00d059c6 SGTC 13334
powernow: FID: 0x6 (6.0x [289MHz]) VID: 0xe (1.300V)
powernow: Minimum speed 289 MHz. Maximum speed 796 MHz.
------
x86info v1.12b. Dave Jones 2001-2003
Feedback to <davej@redhat.com>.
Need to be root to use specified options.
Found 1 CPU
[...]
PowerNOW! Technology information
Available features:
Temperature sensing diode present.
Bus divisor control
Voltage ID control
Connector type: Socket A (462 Pin PGA)
2.2Ghz processor (estimate).
Thanks, it seems to work according to x86info. But the fsb is wrong.
> I would like also that you test dump_psb.c
>
> wget http://poup.poupinou.org/cpufreq/powernow-k7/dump_psb.c
> gcc -O2 -Wall dump_psb.c -o dump_psb
> sudo ./dump_psb 9
>
> in order to check if that model actually do have more PSTs.
PSB version: 12 flags: 0 settling time 100us res1 0 num pst 8
Overriding number of pst :9
PST 1 cpuid 7a0 fsb 133 mfid 15 svid 8 numberstates 7
0 1263500kHz FID 0d ( 9.5) VID 0e (1300mV)
1 1330000kHz FID 0e (10.0) VID 0d (1350mV)
2 1396500kHz FID 0f (10.5) VID 0c (1400mV)
3 1463000kHz FID 00 (11.0) VID 0b (1450mV)
4 1529500kHz FID 01 (11.5) VID 0a (1500mV)
5 1596000kHz FID 02 (12.0) VID 09 (1550mV)
6 1795500kHz FID 15 (13.5) VID 08 (1600mV)
PST 2 cpuid 7a0 fsb 133 mfid 16 svid 7 numberstates 8
0 1197000kHz FID 0c ( 9.0) VID 0e (1300mV)
1 1263500kHz FID 0d ( 9.5) VID 0d (1350mV)
2 1330000kHz FID 0e (10.0) VID 0c (1400mV)
3 1396500kHz FID 0f (10.5) VID 0b (1450mV)
4 1463000kHz FID 00 (11.0) VID 0a (1500mV)
5 1529500kHz FID 01 (11.5) VID 09 (1550mV)
6 1662500kHz FID 03 (12.5) VID 08 (1600mV)
7 1862000kHz FID 16 (14.0) VID 07 (1650mV)
PST 3 cpuid 7a0 fsb 133 mfid 18 svid 7 numberstates 8
0 1396500kHz FID 0f (10.5) VID 0e (1300mV)
1 1463000kHz FID 00 (11.0) VID 0d (1350mV)
2 1529500kHz FID 01 (11.5) VID 0c (1400mV)
3 1596000kHz FID 02 (12.0) VID 0b (1450mV)
4 1662500kHz FID 03 (12.5) VID 0a (1500mV)
5 1729000kHz FID 14 (13.0) VID 09 (1550mV)
6 1795500kHz FID 15 (13.5) VID 08 (1600mV)
7 1995000kHz FID 18 (15.0) VID 07 (1650mV)
PST 4 cpuid 7a0 fsb 133 mfid 1a svid 7 numberstates 8
0 1463000kHz FID 00 (11.0) VID 0e (1300mV)
1 1529500kHz FID 01 (11.5) VID 0d (1350mV)
2 1596000kHz FID 02 (12.0) VID 0c (1400mV)
3 1662500kHz FID 03 (12.5) VID 0b (1450mV)
4 1729000kHz FID 14 (13.0) VID 0a (1500mV)
5 1795500kHz FID 15 (13.5) VID 09 (1550mV)
6 1995000kHz FID 18 (15.0) VID 08 (1600mV)
7 2128000kHz FID 1a (16.0) VID 07 (1650mV)
PST 5 cpuid 780 fsb 133 mfid 3 svid 8 numberstates 7
0 997500kHz FID 09 ( 7.5) VID 0e (1300mV)
1 1197000kHz FID 0c ( 9.0) VID 0d (1350mV)
2 1263500kHz FID 0d ( 9.5) VID 0c (1400mV)
3 1330000kHz FID 0e (10.0) VID 0b (1450mV)
4 1396500kHz FID 0f (10.5) VID 0a (1500mV)
5 1463000kHz FID 00 (11.0) VID 09 (1550mV)
6 1662500kHz FID 03 (12.5) VID 08 (1600mV)
PST 6 cpuid 780 fsb 133 mfid 15 svid 8 numberstates 7
0 1263500kHz FID 0d ( 9.5) VID 0e (1300mV)
1 1330000kHz FID 0e (10.0) VID 0d (1350mV)
2 1396500kHz FID 0f (10.5) VID 0c (1400mV)
3 1463000kHz FID 00 (11.0) VID 0b (1450mV)
4 1529500kHz FID 01 (11.5) VID 0a (1500mV)
5 1596000kHz FID 02 (12.0) VID 09 (1550mV)
6 1795500kHz FID 15 (13.5) VID 08 (1600mV)
PST 7 cpuid 780 fsb 133 mfid 18 svid 7 numberstates 8
0 1396500kHz FID 0f (10.5) VID 0e (1300mV)
1 1463000kHz FID 00 (11.0) VID 0d (1350mV)
2 1529500kHz FID 01 (11.5) VID 0c (1400mV)
3 1596000kHz FID 02 (12.0) VID 0b (1450mV)
4 1662500kHz FID 03 (12.5) VID 0a (1500mV)
5 1729000kHz FID 14 (13.0) VID 09 (1550mV)
6 1795500kHz FID 15 (13.5) VID 08 (1600mV)
7 1995000kHz FID 18 (15.0) VID 07 (1650mV)
PST 8 cpuid 780 fsb 133 mfid 1a svid 7 numberstates 8
0 1463000kHz FID 00 (11.0) VID 0e (1300mV)
1 1529500kHz FID 01 (11.5) VID 0d (1350mV)
2 1596000kHz FID 02 (12.0) VID 0c (1400mV)
3 1662500kHz FID 03 (12.5) VID 0b (1450mV)
4 1729000kHz FID 14 (13.0) VID 0a (1500mV)
5 1795500kHz FID 15 (13.5) VID 09 (1550mV)
6 1995000kHz FID 18 (15.0) VID 08 (1600mV)
7 2128000kHz FID 1a (16.0) VID 07 (1650mV)
PST 9 cpuid 000 fsb 0 mfid 0 svid eb numberstates 7
0 0kHz FID ffffffc1 ( 3.8) VID 08 (1600mV)
1 0kHz FID 1c (17.0) VID 0e (1300mV)
2 0kHz FID fffffff1 (23.2) VID 0e (1300mV)
3 0kHz FID fffffffe ( 0.0) VID 21 (622879794mV)
4 0kHz FID ffffffb7 (16.0) VID 00 (2000mV)
5 0kHz FID ffffff96 (64936692.8) VID 06 (1700mV)
6 0kHz FID fffffff4 (-7373406.-2) VID 6e ( 13mV)
next prev parent reply other threads:[~2004-04-16 15:00 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-04-15 22:00 Acer Aspire 1350 broken PST jy
2004-04-16 12:05 ` Bruno Ducrot
2004-04-16 15:00 ` jy [this message]
2004-04-16 15:11 ` Bruno Ducrot
2004-04-16 15:19 ` jy
2004-04-16 15:24 ` Bruno Ducrot
2004-04-16 16:59 ` jy
2004-04-16 18:20 ` Bruno Ducrot
2004-04-16 21:27 ` jy
2004-04-17 9:32 ` Dominik Brodowski
2004-04-17 13:00 ` Bruno Ducrot
2004-04-17 16:58 ` Dominik Brodowski
2004-04-19 9:26 ` Bruno Ducrot
2004-04-19 11:54 ` Dominik Brodowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='c5osds$fed$1@sea.gmane.org' \
--to=jy454@yahoo.fr \
--cc=cpufreq@www.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.