All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vadim Fedorenko <vadim.fedorenko@linux.dev>
To: Vladimir Oltean <vladimir.oltean@nxp.com>, netdev@vger.kernel.org
Cc: Bryan Whitehead <bryan.whitehead@microchip.com>,
	Raju Lakkaraju <Raju.Lakkaraju@microchip.com>,
	Vishvambar Panth S <vishvambarpanth.s@microchip.com>,
	UNGLinuxDriver@microchip.com, Andrew Lunn <andrew@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Simon Horman <horms@kernel.org>,
	Richard Cochran <richardcochran@gmail.com>
Subject: Re: [PATCH net-next 2/2] net: lan743x: implement ndo_hwtstamp_get()
Date: Wed, 14 May 2025 22:27:42 +0100	[thread overview]
Message-ID: <c7af0e1e-7ba2-48d0-9a0f-4903dbe97421@linux.dev> (raw)
In-Reply-To: <20250514151931.1988047-2-vladimir.oltean@nxp.com>

On 14/05/2025 16:19, Vladimir Oltean wrote:
> Permit programs such as "hwtstamp_ctl -i eth0" to retrieve the current
> timestamping configuration of the NIC, rather than returning "Device
> driver does not have support for non-destructive SIOCGHWTSTAMP."
> 
> The driver configures all channels with the same timestamping settings.
> On TX, retrieve the settings of the first channel, those should be
> representative for the entire NIC. On RX, save the filter settings in a
> new adapter field.
> 
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> ---
>   drivers/net/ethernet/microchip/lan743x_main.c |  2 ++
>   drivers/net/ethernet/microchip/lan743x_main.h |  1 +
>   drivers/net/ethernet/microchip/lan743x_ptp.c  | 18 ++++++++++++++++++
>   drivers/net/ethernet/microchip/lan743x_ptp.h  |  3 ++-
>   4 files changed, 23 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c
> index b01695bf4f55..880681085df2 100644
> --- a/drivers/net/ethernet/microchip/lan743x_main.c
> +++ b/drivers/net/ethernet/microchip/lan743x_main.c
> @@ -1729,6 +1729,7 @@ int lan743x_rx_set_tstamp_mode(struct lan743x_adapter *adapter,
>   	default:
>   			return -ERANGE;
>   	}
> +	adapter->rx_tstamp_filter = rx_filter;
>   	return 0;
>   }
>   
> @@ -3445,6 +3446,7 @@ static const struct net_device_ops lan743x_netdev_ops = {
>   	.ndo_change_mtu		= lan743x_netdev_change_mtu,
>   	.ndo_get_stats64	= lan743x_netdev_get_stats64,
>   	.ndo_set_mac_address	= lan743x_netdev_set_mac_address,
> +	.ndo_hwtstamp_get	= lan743x_ptp_hwtstamp_get,
>   	.ndo_hwtstamp_set	= lan743x_ptp_hwtstamp_set,
>   };
>   
> diff --git a/drivers/net/ethernet/microchip/lan743x_main.h b/drivers/net/ethernet/microchip/lan743x_main.h
> index db5fc73e41cc..02a28b709163 100644
> --- a/drivers/net/ethernet/microchip/lan743x_main.h
> +++ b/drivers/net/ethernet/microchip/lan743x_main.h
> @@ -1087,6 +1087,7 @@ struct lan743x_adapter {
>   	phy_interface_t		phy_interface;
>   	struct phylink		*phylink;
>   	struct phylink_config	phylink_config;
> +	int			rx_tstamp_filter;
>   };
>   
>   #define LAN743X_COMPONENT_FLAG_RX(channel)  BIT(20 + (channel))
> diff --git a/drivers/net/ethernet/microchip/lan743x_ptp.c b/drivers/net/ethernet/microchip/lan743x_ptp.c
> index 026d1660fd74..a3b48388b3fd 100644
> --- a/drivers/net/ethernet/microchip/lan743x_ptp.c
> +++ b/drivers/net/ethernet/microchip/lan743x_ptp.c
> @@ -1736,6 +1736,24 @@ void lan743x_ptp_tx_timestamp_skb(struct lan743x_adapter *adapter,
>   	lan743x_ptp_tx_ts_complete(adapter);
>   }
>   
> +int lan743x_ptp_hwtstamp_get(struct net_device *netdev,
> +			     struct kernel_hwtstamp_config *config)
> +{
> +	struct lan743x_adapter *adapter = netdev_priv(netdev);
> +	struct lan743x_tx *tx = &adapter->tx[0];
> +
> +	if (tx->ts_flags & TX_TS_FLAG_ONE_STEP_SYNC)
> +		config->tx_type = HWTSTAMP_TX_ONESTEP_SYNC;
> +	else if (tx->ts_flags & TX_TS_FLAG_TIMESTAMPING_ENABLED)
> +		config->tx_type = HWTSTAMP_TX_ON;
> +	else
> +		config->tx_type = HWTSTAMP_TX_OFF;
> +
> +	config->rx_filter = adapter->rx_tstamp_filter;
> +
> +	return 0;
> +}
> +
>   int lan743x_ptp_hwtstamp_set(struct net_device *netdev,
>   			     struct kernel_hwtstamp_config *config,
>   			     struct netlink_ext_ack *extack)
> diff --git a/drivers/net/ethernet/microchip/lan743x_ptp.h b/drivers/net/ethernet/microchip/lan743x_ptp.h
> index 9581a7992ff6..e8d073bfa2ca 100644
> --- a/drivers/net/ethernet/microchip/lan743x_ptp.h
> +++ b/drivers/net/ethernet/microchip/lan743x_ptp.h
> @@ -51,7 +51,8 @@ int lan743x_ptp_open(struct lan743x_adapter *adapter);
>   void lan743x_ptp_close(struct lan743x_adapter *adapter);
>   void lan743x_ptp_update_latency(struct lan743x_adapter *adapter,
>   				u32 link_speed);
> -
> +int lan743x_ptp_hwtstamp_get(struct net_device *netdev,
> +			     struct kernel_hwtstamp_config *config);
>   int lan743x_ptp_hwtstamp_set(struct net_device *netdev,
>   			     struct kernel_hwtstamp_config *config,
>   			     struct netlink_ext_ack *extack);

Thanks for making this improvement. Looks like the pattern of not having
"get" callbacks got into this from phy drivers.

Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>

  parent reply	other threads:[~2025-05-14 21:27 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-14 15:19 [PATCH net-next 1/2] net: lan743x: convert to ndo_hwtstamp_set() Vladimir Oltean
2025-05-14 15:19 ` [PATCH net-next 2/2] net: lan743x: implement ndo_hwtstamp_get() Vladimir Oltean
2025-05-14 19:00   ` Gerhard Engleder
2025-05-14 21:27   ` Vadim Fedorenko [this message]
2025-05-14 18:57 ` [PATCH net-next 1/2] net: lan743x: convert to ndo_hwtstamp_set() Gerhard Engleder
2025-05-14 21:25 ` Vadim Fedorenko
2025-05-16  1:00 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c7af0e1e-7ba2-48d0-9a0f-4903dbe97421@linux.dev \
    --to=vadim.fedorenko@linux.dev \
    --cc=Raju.Lakkaraju@microchip.com \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=andrew@lunn.ch \
    --cc=bryan.whitehead@microchip.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=horms@kernel.org \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=richardcochran@gmail.com \
    --cc=vishvambarpanth.s@microchip.com \
    --cc=vladimir.oltean@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.