From: mikep <mikpolniak@adelphia.net>
To: linux-hotplug@vger.kernel.org
Subject: Re: how to rename network interface?
Date: Mon, 10 May 2004 11:30:48 +0000 [thread overview]
Message-ID: <c7np59$4sp$1@sea.gmane.org> (raw)
In-Reply-To: <c7lt0l$dr7$1@sea.gmane.org>
Kay Sievers wrote:
> On Sun, 2004-05-09 at 14:24 -0400, mikep wrote:
>
>>Using udev-025 i am trying to rename eth0 with these rules in 50-udev.rules:
>>
>>BUS="pci", SYSFS{device}="0x8169", NAME="eth0"
>>BUS="pci", SYSFS{device}="0x8139", NAME="eth1"
>
>
> What does udevinfo show?
> udevinfo -p /class/net/eth0 -a
>
7:16 >>udevinfo -p /class/net/eth0 -a
looking at class device '/sys/class/net/eth0':
SYSFS{addr_len}="6"
SYSFS{address}="00:01:0a:10:a7:3b"
SYSFS{broadcast}="ff:ff:ff:ff:ff:ff"
SYSFS{features}="0x29"
SYSFS{flags}="0x1003"
SYSFS{ifindex}="2"
SYSFS{iflink}="2"
SYSFS{mtu}="1500"
SYSFS{tx_queue_len}="1000"
SYSFS{type}="1"
follow the class device's "device"
looking at the device chain at
'/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0':
BUS="pci"
ID="0000:01:07.0"
SYSFS{class}="0x020000"
SYSFS{detach_state}="0"
SYSFS{device}="0x8139"
SYSFS{irq}="5"
SYSFS{subsystem_device}="0x8139"
SYSFS{subsystem_vendor}="0x1436"
SYSFS{vendor}="0x10ec"
looking at the device chain at '/sys/devices/pci0000:00/0000:00:08.0':
BUS="pci"
ID="0000:00:08.0"
SYSFS{class}="0x060400"
SYSFS{detach_state}="0"
SYSFS{device}="0x006c"
SYSFS{irq}="0"
SYSFS{subsystem_device}="0x0000"
SYSFS{subsystem_vendor}="0x0000"
SYSFS{vendor}="0x10de"
looking at the device chain at '/sys/devices/pci0000:00':
BUS=""
ID="pci0000:00"
SYSFS{detach_state}="0"
And udevinfo for eth1 shows:
looking at class device '/sys/class/net/eth1':
SYSFS{addr_len}="6"
SYSFS{address}="00:08:54:d1:a0:d5"
SYSFS{broadcast}="ff:ff:ff:ff:ff:ff"
SYSFS{features}="0x0"
SYSFS{flags}="0x1002"
SYSFS{ifindex}="3"
SYSFS{iflink}="3"
SYSFS{mtu}="1500"
SYSFS{tx_queue_len}="1000"
SYSFS{type}="1"
follow the class device's "device"
looking at the device chain at
'/sys/devices/pci0000:00/0000:00:08.0/0000:01:08.0':
BUS="pci"
ID="0000:01:08.0"
SYSFS{class}="0x020000"
SYSFS{detach_state}="0"
SYSFS{device}="0x8169"
SYSFS{irq}="11"
SYSFS{subsystem_device}="0x8169"
......................................
I also tried these rules without success:
KERNEL="eth*", SYSFS{address}="00:08:54:d1:a0:d5", NAME="eth0"
KERNEL="eth*", SYSFS{address}="00:01:0a:10:a7:3b", NAME="eth1"
If i use 'nameif' in the hotplug script net.agent it works. But i prefer
to rename the interface by device type rather than address.
-------------------------------------------------------
This SF.Net email is sponsored by Sleepycat Software
Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to
deliver higher performing products faster, at low TCO.
http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
next prev parent reply other threads:[~2004-05-10 11:30 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-05-09 18:24 how to rename network interface? mikep
2004-05-10 2:05 ` Kay Sievers
2004-05-10 11:30 ` mikep [this message]
2004-05-10 12:41 ` mikep
2004-05-11 10:41 ` Kay Sievers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='c7np59$4sp$1@sea.gmane.org' \
--to=mikpolniak@adelphia.net \
--cc=linux-hotplug@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.