From: Eric Farman <farman@linux.ibm.com>
To: jrossi@linux.ibm.com, qemu-devel@nongnu.org,
qemu-s390x@nongnu.org, cohuck@redhat.com, mjrosato@linux.ibm.com
Cc: zycai@linux.ibm.com
Subject: Re: [PATCH v2 5/8] pc-bios/s390-ccw: Abstract virtio_run() for generic use
Date: Wed, 26 Aug 2026 16:29:26 -0400 [thread overview]
Message-ID: <caf3ea7d-a242-45f1-ab95-d83065798042@linux.ibm.com> (raw)
In-Reply-To: <20260811144629.866641-6-jrossi@linux.ibm.com>
On 8/11/26 10:46 AM, jrossi@linux.ibm.com wrote:
> From: Jared Rossi <jrossi@linux.ibm.com>
>
> The existing virtio_ccw_run() actually has no dependency on CCW. Rather
> than add a case for non-ccw devices, we can just put main logic right in
> the virtio_run() call so that it can be used for other bus types directly.
>
> Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
> ---
> pc-bios/s390-ccw/virtio-ccw.c | 17 -----------------
> pc-bios/s390-ccw/virtio-ccw.h | 1 -
> pc-bios/s390-ccw/virtio.c | 16 +++++++++++-----
> 3 files changed, 11 insertions(+), 23 deletions(-)
I thought for sure I reviewed this in v1, and indeed I did. But you
abstracted it further and left my tag off (thanks!), and this is even
better.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
>
> diff --git a/pc-bios/s390-ccw/virtio-ccw.c b/pc-bios/s390-ccw/virtio-ccw.c
> index 5cb2158ed2..ea5dbc2857 100644
> --- a/pc-bios/s390-ccw/virtio-ccw.c
> +++ b/pc-bios/s390-ccw/virtio-ccw.c
> @@ -107,23 +107,6 @@ long virtio_ccw_notify(SubChannelId schid, int vq_idx, long cookie)
> vq_idx, cookie);
> }
>
> -int virtio_ccw_run(VDev *vdev, int vqid, VirtioCmd *cmd)
> -{
> - VRing *vr = &vdev->vrings[vqid];
> - int i = 0;
> -
> - do {
> - vring_send_buf(vr, cmd[i].data, cmd[i].size,
> - cmd[i].flags | (i ? VRING_HIDDEN_IS_CHAIN : 0));
> - } while (cmd[i++].flags & VRING_DESC_F_NEXT);
> -
> - vring_wait_reply();
> - if (drain_irqs()) {
> - return -1;
> - }
> - return 0;
> -}
> -
> int virtio_ccw_reset(VDev *vdev)
> {
> return run_ccw(vdev, CCW_CMD_VDEV_RESET, NULL, 0, false);
> diff --git a/pc-bios/s390-ccw/virtio-ccw.h b/pc-bios/s390-ccw/virtio-ccw.h
> index a506767eaa..43d21906e5 100644
> --- a/pc-bios/s390-ccw/virtio-ccw.h
> +++ b/pc-bios/s390-ccw/virtio-ccw.h
> @@ -16,7 +16,6 @@ extern SubChannelId blk_schid;
> /* virtio-ccw.c */
> int drain_irqs_ccw(SubChannelId schid);
> bool virtio_ccw_is_supported(VDev *vdev);
> -int virtio_ccw_run(VDev *vdev, int vqid, VirtioCmd *cmd);
> long virtio_ccw_notify(SubChannelId schid, int vq_idx, long cookie);
> int virtio_ccw_setup(VDev *vdev);
> int virtio_ccw_reset(VDev *vdev);
> diff --git a/pc-bios/s390-ccw/virtio.c b/pc-bios/s390-ccw/virtio.c
> index 0b33544144..34c5e6ee22 100644
> --- a/pc-bios/s390-ccw/virtio.c
> +++ b/pc-bios/s390-ccw/virtio.c
> @@ -70,13 +70,19 @@ int drain_irqs(void)
>
> int virtio_run(VDev *vdev, int vqid, VirtioCmd *cmd)
> {
> - switch (vdev->ipl_type) {
> - case S390_IPL_TYPE_QEMU_SCSI:
> - case S390_IPL_TYPE_CCW:
> - return virtio_ccw_run(vdev, vqid, cmd);
> - default:
> + VRing *vr = &vdev->vrings[vqid];
> + int i = 0;
> +
> + do {
> + vring_send_buf(vr, cmd[i].data, cmd[i].size,
> + cmd[i].flags | (i ? VRING_HIDDEN_IS_CHAIN : 0));
> + } while (cmd[i++].flags & VRING_DESC_F_NEXT);
> +
> + vring_wait_reply();
> + if (drain_irqs()) {
> return -1;
> }
> + return 0;
> }
>
> void vring_init(VRing *vr, VqInfo *info)
next prev parent reply other threads:[~2026-08-26 20:30 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-11 14:46 [PATCH v2 0/8] s390x: Add support for virtio-scsi-pci boot device jrossi
2026-08-11 14:46 ` [PATCH v2 1/8] pc-bios/s390-ccw: Check if a PCI function is already enabled before trying to enable it jrossi
2026-08-24 17:34 ` Zhuoying Cai
2026-08-26 20:39 ` Eric Farman
2026-08-11 14:46 ` [PATCH v2 2/8] hw/s390x/ipl: Fix incorrect PCI IPL block length constant jrossi
2026-08-24 17:53 ` Zhuoying Cai
2026-08-25 10:29 ` Eric Farman
2026-08-25 16:44 ` Zhuoying Cai
2026-08-25 18:04 ` Jared Rossi
2026-08-25 19:26 ` Matthew Rosato
2026-08-26 14:40 ` Jared Rossi
2026-08-11 14:46 ` [PATCH v2 3/8] s390x/ipl: Add PCI and bus fields to iplBlockQemuScsi jrossi
2026-08-26 19:35 ` Eric Farman
2026-08-11 14:46 ` [PATCH v2 4/8] pc-bios/s390-ccw: Use bus specific IPL_TYPE directly for scsi IPL jrossi
2026-08-26 20:24 ` Eric Farman
2026-08-11 14:46 ` [PATCH v2 5/8] pc-bios/s390-ccw: Abstract virtio_run() for generic use jrossi
2026-08-26 16:42 ` Zhuoying Cai
2026-08-26 20:29 ` Eric Farman [this message]
2026-08-11 14:46 ` [PATCH v2 6/8] pc-bios/s390-ccw: Add support for virtio-scsi-pci IPL jrossi
2026-08-26 21:11 ` Eric Farman
2026-08-27 14:55 ` Jared Rossi
2026-08-11 14:46 ` [PATCH v2 7/8] s390x: Find scsi-pci boot device and build IPLB jrossi
2026-08-11 14:46 ` [PATCH v2 8/8] tests/qtest: Add s390x PCI SCSI fallback test to cdrom-test.c jrossi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=caf3ea7d-a242-45f1-ab95-d83065798042@linux.ibm.com \
--to=farman@linux.ibm.com \
--cc=cohuck@redhat.com \
--cc=jrossi@linux.ibm.com \
--cc=mjrosato@linux.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-s390x@nongnu.org \
--cc=zycai@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.