From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: "José Guilherme de Castro Rodrigues" <jose.guilherme.cr.bh@gmail.com>
Cc: Corentin Chary <corentin.chary@gmail.com>,
"Luke D. Jones" <luke@ljones.dev>,
Denis Benato <denis.benato@linux.dev>,
Hans de Goede <hansg@kernel.org>,
platform-driver-x86@vger.kernel.org,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2] platform/x86: asus-wmi: fix camera key led on Zenbook S14
Date: Tue, 28 Apr 2026 11:22:20 +0300 (EEST) [thread overview]
Message-ID: <ce2a2f37-ad8a-647c-0db8-83f6efd99f12@linux.intel.com> (raw)
In-Reply-To: <adg6GzkykThAB_4u@djouze-zen>
[-- Attachment #1: Type: text/plain, Size: 4447 bytes --]
On Thu, 9 Apr 2026, José Guilherme de Castro Rodrigues wrote:
> Fix key led not turning on/off when the camera key is pressed. The
> asus_wmi_dev_is_present(ASUS_WMI_DEVID_CAMERA_LED) check fails on
> Zenbook S14, and no sysfs attribute for the camera key led is
> created.
>
> The check succeeds for ASUS_WMI_DEVID_CAMERA_LED_NEG, though,
> and when it is read, the led state is synchronized. By doing a read after
> every key press, the led is guaranteed to stay in sync with the actual
> camera state.
>
> This change is not visible to userspace, as no sysfs attribute for
> ASUS_WMI_DEVID_CAMERA_LED_NEG exists.
While I believe you are "correct" that userspace won't see a thing, is
this really correct way to implement support for this device?
I mean the camera led init in asus_wmi_led_init() is gated by
asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_CAMERA_LED) but should that
be gated by either CAMERA_LED or CAMERA_LED_NEG and the related code in
*_camera_led_*() that now only uses ASUS_WMI_DEVID_CAMERA_LED
should use which ever of them is available?
> Tested on an ASUS Zenbook S14 with BIOS version UX5406SA.309.
>
> Signed-off-by: José Guilherme de Castro Rodrigues <jose.guilherme.cr.bh@gmail.com>
> ---
> Changes in v2:
> - Do not return after triggering the update.
> - Use tabs for indentation on new defines.
> ---
> drivers/platform/x86/asus-wmi.c | 19 +++++++++++++++++++
> include/linux/platform_data/x86/asus-wmi.h | 2 +-
> 2 files changed, 20 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
> index 80144c412b90..32d0d4ce60ff 100644
> --- a/drivers/platform/x86/asus-wmi.c
> +++ b/drivers/platform/x86/asus-wmi.c
> @@ -70,6 +70,8 @@ module_param(fnlock_default, bool, 0444);
> #define NOTIFY_KBD_TTP 0xae
> #define NOTIFY_LID_FLIP 0xfa
> #define NOTIFY_LID_FLIP_ROG 0xbd
> +#define NOTIFY_CAMERA_TOGGLE_1 0x82
> +#define NOTIFY_CAMERA_TOGGLE_2 0x85
>
> #define ASUS_WMI_FNLOCK_BIOS_DISABLED BIT(0)
>
> @@ -307,6 +309,7 @@ struct asus_wmi {
> u32 kbd_rgb_dev;
> bool kbd_rgb_state_available;
> bool oobe_state_available;
> + bool camera_neg_led_available;
>
> u8 throttle_thermal_policy_mode;
> u32 throttle_thermal_policy_dev;
> @@ -1982,6 +1985,18 @@ static int micmute_led_set(struct led_classdev *led_cdev,
> return err < 0 ? err : 0;
> }
>
> +static bool is_camera_toggle(int code)
> +{
> + return code == NOTIFY_CAMERA_TOGGLE_1 || code == NOTIFY_CAMERA_TOGGLE_2;
> +}
> +
> +static void camera_neg_led_trigger_update(struct asus_wmi *asus)
> +{
> + u32 result;
> +
> + asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_CAMERA_LED_NEG, &result);
> +}
> +
> static enum led_brightness camera_led_get(struct led_classdev *led_cdev)
> {
> struct asus_wmi *asus;
> @@ -4587,6 +4602,9 @@ static void asus_wmi_handle_event_code(int code, struct asus_wmi *asus)
> if (is_display_toggle(code) && asus->driver->quirks->no_display_toggle)
> return;
>
> + if (is_camera_toggle(code) && asus->camera_neg_led_available)
> + camera_neg_led_trigger_update(asus);
> +
> if (!sparse_keymap_report_event(asus->inputdev, code,
> key_value, autorelease))
> pr_info("Unknown key code 0x%x\n", code);
> @@ -5062,6 +5080,7 @@ static int asus_wmi_add(struct platform_device *pdev)
> #endif /* IS_ENABLED(CONFIG_ASUS_WMI_DEPRECATED_ATTRS) */
>
> asus->oobe_state_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_OOBE);
> + asus->camera_neg_led_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_CAMERA_LED_NEG);
>
> if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY))
> asus->throttle_thermal_policy_dev = ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY;
> diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h
> index 554f41b827e1..1a9349da6069 100644
> --- a/include/linux/platform_data/x86/asus-wmi.h
> +++ b/include/linux/platform_data/x86/asus-wmi.h
> @@ -56,7 +56,7 @@
> #define ASUS_WMI_DEVID_MICMUTE_LED 0x00040017
>
> /* Disable Camera LED */
> -#define ASUS_WMI_DEVID_CAMERA_LED_NEG 0x00060078 /* 0 = on (unused) */
> +#define ASUS_WMI_DEVID_CAMERA_LED_NEG 0x00060078 /* 0 = on */
> #define ASUS_WMI_DEVID_CAMERA_LED 0x00060079 /* 1 = on */
>
> /* Backlight and Brightness */
>
--
i.
next prev parent reply other threads:[~2026-04-28 8:22 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-09 23:45 [PATCH v2] platform/x86: asus-wmi: fix camera key led on Zenbook S14 José Guilherme de Castro Rodrigues
2026-04-28 8:22 ` Ilpo Järvinen [this message]
2026-04-28 23:20 ` José Guilherme de Castro Rodrigues
2026-05-06 13:18 ` Ilpo Järvinen
2026-05-06 22:29 ` José Guilherme de Castro Rodrigues
2026-05-11 0:25 ` José Guilherme de Castro Rodrigues
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ce2a2f37-ad8a-647c-0db8-83f6efd99f12@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=corentin.chary@gmail.com \
--cc=denis.benato@linux.dev \
--cc=hansg@kernel.org \
--cc=jose.guilherme.cr.bh@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=luke@ljones.dev \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.