From mboxrd@z Thu Jan 1 00:00:00 1970 From: s.riedmueller@phytec.de (=?UTF-8?Q?Stefan_Riedm=c3=bcller?=) Date: Mon, 22 Jan 2018 11:28:29 +0100 Subject: [PATCH v5 0/6] ARM: dts: Add PHYTEC phyCORE-i.MX 6 and phyBOARD-Mira carrier board support In-Reply-To: <1515514200-9801-1-git-send-email-s.riedmueller@phytec.de> References: <1515514200-9801-1-git-send-email-s.riedmueller@phytec.de> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Shawn, I noticed this patch stack did not find its way into your next branch yet. Is there anything I can do to speed up the process? Thanks, Stefan On 09.01.2018 17:09, Stefan Riedmueller wrote: > This patchset adds support for the PHYTEC phyCORE-i.MX 6 and phyBOARD-Mira. > > Following boards are included: > phyBOARD-Mira with phyCORE-i.MX 6 Quad/Dual with: > - i.MX 6Quad/Dual SOC > - NAND or eMMC > - HDMI interface > - LVDS display interface > - Gigabit Ethernet > - USB Host > - CAN > - RS232 > - PCIe > This board also contains an LVDS camera interface and parallel display > interface which are not yet supported. > > phyBAORD-Mira with phyCORE-i.MX 6 DualLight/Solo with: > - i.MX 6DualLight/Solo > - NAND > - HDMI interface > - 100 MBit/s Ethernet > - USB Host > - RS232 > > phyBOARD-Mira with phyCORE-i.MX 6 QuadPlus with: > - i.MX 6QuadPlus SOC > - NAND > - HDMI interface > - LVDS display interface > - Gigabit Ethernet > - USB Host > - CAN > - RS232 > - PCIe > This board also contains an LVDS camera interface and parallel display > interface which are not yet supported. > > The entire series is based on v4.15-rc4. > > Changes since v1: > - Removed unnecessary ipu aliases > - Added unit-address to memory node name > - Fixed eeprom compatible to correct vendor name (atmel instead of cat) > - Fixed rtc compatible to correct vendor name (microcrystal instead of mc) > - Changed pcie regulator to be used with vpcie-supply in &pcie node and > removed regulator-always-on > - Changed pcie reset-gpio polarity to GPIO_ACTIVE_LOW > - Replaced fsl,uart-has-rtscts by uart-has-rtscts > - Fixed typos in defconfig patch > > Changes since v2: > - Fixed typo in patch subject PATCH 4/6 > - Added reviewed by tags on PATCH 4/6 and PATCH 6/6 > > Changes since v3: > - Removed model and compatible from phycore dtsi > - Changed flash compatible to jedec,spi-nor > - Renamed some_green node to som-led-green > - Dropped labels for eeprom, pmic, da9062_wdt and da9062_reg > - Renamed flash label to m25p80 > - Put compatible at beginning of property lists > - Changed copyright year to 2018 > - Added reviewed by tags on PATCH 1/6, 2/6, 3/6 and 5/6 > > Changes since v4: > - Rearranged &m25p80 node in dts files to fit alphabetical order > - Fixed a parenthesis for uniformity in mira dtsi > > Christian Hemp (2): > ARM: dts: imx6: Add support for phyBOARD-Mira i.MX 6Quad/Dual RDK > ARM: dts: imx6: Add support for phyBOARD-Mira i.MX 6 DualLight/Solo > RDK > > Enrico Scholz (1): > ARM: dts: imx6: Add support for phyBOARD-Mira with i.MX 6QuadPlus > > Stefan Riedmueller (3): > ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM > ARM: dts: imx6: Add initial support for phyBOARD-Mira > ARM: imx_v6_v7_defconfig: Enable Dialog Semiconductor DA9062 driver > > arch/arm/boot/dts/Makefile | 4 + > arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts | 64 ++++ > arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts | 72 ++++ > arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts | 72 ++++ > arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi | 390 ++++++++++++++++++++++ > arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi | 279 ++++++++++++++++ > arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts | 72 ++++ > arch/arm/configs/imx_v6_v7_defconfig | 4 + > 8 files changed, 957 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts > create mode 100644 arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts > create mode 100644 arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts > create mode 100644 arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi > create mode 100644 arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi > create mode 100644 arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts > From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?Q?Stefan_Riedm=c3=bcller?= Subject: Re: [PATCH v5 0/6] ARM: dts: Add PHYTEC phyCORE-i.MX 6 and phyBOARD-Mira carrier board support Date: Mon, 22 Jan 2018 11:28:29 +0100 Message-ID: References: <1515514200-9801-1-git-send-email-s.riedmueller@phytec.de> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1515514200-9801-1-git-send-email-s.riedmueller-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org> Content-Language: en-US Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org Cc: kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, fabio.estevam-3arQi8VN3Tc@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: devicetree@vger.kernel.org Hi Shawn, I noticed this patch stack did not find its way into your next branch yet. Is there anything I can do to speed up the process? Thanks, Stefan On 09.01.2018 17:09, Stefan Riedmueller wrote: > This patchset adds support for the PHYTEC phyCORE-i.MX 6 and phyBOARD-Mira. > > Following boards are included: > phyBOARD-Mira with phyCORE-i.MX 6 Quad/Dual with: > - i.MX 6Quad/Dual SOC > - NAND or eMMC > - HDMI interface > - LVDS display interface > - Gigabit Ethernet > - USB Host > - CAN > - RS232 > - PCIe > This board also contains an LVDS camera interface and parallel display > interface which are not yet supported. > > phyBAORD-Mira with phyCORE-i.MX 6 DualLight/Solo with: > - i.MX 6DualLight/Solo > - NAND > - HDMI interface > - 100 MBit/s Ethernet > - USB Host > - RS232 > > phyBOARD-Mira with phyCORE-i.MX 6 QuadPlus with: > - i.MX 6QuadPlus SOC > - NAND > - HDMI interface > - LVDS display interface > - Gigabit Ethernet > - USB Host > - CAN > - RS232 > - PCIe > This board also contains an LVDS camera interface and parallel display > interface which are not yet supported. > > The entire series is based on v4.15-rc4. > > Changes since v1: > - Removed unnecessary ipu aliases > - Added unit-address to memory node name > - Fixed eeprom compatible to correct vendor name (atmel instead of cat) > - Fixed rtc compatible to correct vendor name (microcrystal instead of mc) > - Changed pcie regulator to be used with vpcie-supply in &pcie node and > removed regulator-always-on > - Changed pcie reset-gpio polarity to GPIO_ACTIVE_LOW > - Replaced fsl,uart-has-rtscts by uart-has-rtscts > - Fixed typos in defconfig patch > > Changes since v2: > - Fixed typo in patch subject PATCH 4/6 > - Added reviewed by tags on PATCH 4/6 and PATCH 6/6 > > Changes since v3: > - Removed model and compatible from phycore dtsi > - Changed flash compatible to jedec,spi-nor > - Renamed some_green node to som-led-green > - Dropped labels for eeprom, pmic, da9062_wdt and da9062_reg > - Renamed flash label to m25p80 > - Put compatible at beginning of property lists > - Changed copyright year to 2018 > - Added reviewed by tags on PATCH 1/6, 2/6, 3/6 and 5/6 > > Changes since v4: > - Rearranged &m25p80 node in dts files to fit alphabetical order > - Fixed a parenthesis for uniformity in mira dtsi > > Christian Hemp (2): > ARM: dts: imx6: Add support for phyBOARD-Mira i.MX 6Quad/Dual RDK > ARM: dts: imx6: Add support for phyBOARD-Mira i.MX 6 DualLight/Solo > RDK > > Enrico Scholz (1): > ARM: dts: imx6: Add support for phyBOARD-Mira with i.MX 6QuadPlus > > Stefan Riedmueller (3): > ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM > ARM: dts: imx6: Add initial support for phyBOARD-Mira > ARM: imx_v6_v7_defconfig: Enable Dialog Semiconductor DA9062 driver > > arch/arm/boot/dts/Makefile | 4 + > arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts | 64 ++++ > arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts | 72 ++++ > arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts | 72 ++++ > arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi | 390 ++++++++++++++++++++++ > arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi | 279 ++++++++++++++++ > arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts | 72 ++++ > arch/arm/configs/imx_v6_v7_defconfig | 4 + > 8 files changed, 957 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts > create mode 100644 arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts > create mode 100644 arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts > create mode 100644 arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi > create mode 100644 arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi > create mode 100644 arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html