From: Matthias Brugger <matthias.bgg@gmail.com>
To: "Rob Herring (Arm)" <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Enric Balletbo i Serra <eballetbo@kernel.org>,
Ben Ho <Ben.Ho@mediatek.com>,
Fabien Parent <fparent@baylibre.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Subject: Re: [PATCH] arm64: dts: mediatek: mt8183: Fix out of range pull values
Date: Tue, 9 Sep 2025 14:42:28 +0200 [thread overview]
Message-ID: <cec6ee57-a32f-478a-8612-09fd334c334e@gmail.com> (raw)
In-Reply-To: <20250722171152.58923-2-robh@kernel.org>
On 22/07/2025 19:11, Rob Herring (Arm) wrote:
> A value of 10 is not valid for "mediatek,pull-down-adv" and
> "mediatek,pull-up-adv" properties which have defined values of 0-3. It
> appears the "10" was written as a binary value. The driver only looks at
> the lowest 2 bits, so the value "10" decimal works out the same as if
> "2" was used.
>
> Fixes: cd894e274b74 ("arm64: dts: mt8183: Add krane-sku176 board")
> Fixes: 19b6403f1e2a ("arm64: dts: mt8183: add mt8183 pumpkin board")
> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Queued, thanks
Matthias
> ---
> This is just a few of the warnings related to mt8183-pinctrl... Mediatek
> is #1 for DT warnings on arm64. And by #1, I mean worst. :( It would be
> nice to see some progress on fixing them. Otherwise, seeing new Mediatek
> bindings rather than fixing the existing stuff makes me grumpy.
>
> arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 14 +++++++-------
> arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts | 14 +++++++-------
> 2 files changed, 14 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> index 400c61d11035..fff93e26eb76 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> @@ -580,7 +580,7 @@ pins-cmd-dat {
> pins-clk {
> pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
> drive-strength = <MTK_DRIVE_14mA>;
> - mediatek,pull-down-adv = <10>;
> + mediatek,pull-down-adv = <2>;
> };
>
> pins-rst {
> @@ -609,13 +609,13 @@ pins-cmd-dat {
> pins-clk {
> pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
> drive-strength = <MTK_DRIVE_14mA>;
> - mediatek,pull-down-adv = <10>;
> + mediatek,pull-down-adv = <2>;
> };
>
> pins-ds {
> pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
> drive-strength = <MTK_DRIVE_14mA>;
> - mediatek,pull-down-adv = <10>;
> + mediatek,pull-down-adv = <2>;
> };
>
> pins-rst {
> @@ -633,13 +633,13 @@ pins-cmd-dat {
> <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
> <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
> input-enable;
> - mediatek,pull-up-adv = <10>;
> + mediatek,pull-up-adv = <2>;
> };
>
> pins-clk {
> pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
> input-enable;
> - mediatek,pull-down-adv = <10>;
> + mediatek,pull-down-adv = <2>;
> };
> };
>
> @@ -652,13 +652,13 @@ pins-cmd-dat {
> <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
> drive-strength = <6>;
> input-enable;
> - mediatek,pull-up-adv = <10>;
> + mediatek,pull-up-adv = <2>;
> };
>
> pins-clk {
> pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
> drive-strength = <8>;
> - mediatek,pull-down-adv = <10>;
> + mediatek,pull-down-adv = <2>;
> input-enable;
> };
> };
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
> index dbdee604edab..7c3010889ae7 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
> @@ -324,7 +324,7 @@ pins_cmd_dat {
> pins_clk {
> pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
> drive-strength = <MTK_DRIVE_14mA>;
> - mediatek,pull-down-adv = <10>;
> + mediatek,pull-down-adv = <2>;
> };
>
> pins_rst {
> @@ -353,13 +353,13 @@ pins_cmd_dat {
> pins_clk {
> pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
> drive-strength = <MTK_DRIVE_14mA>;
> - mediatek,pull-down-adv = <10>;
> + mediatek,pull-down-adv = <2>;
> };
>
> pins_ds {
> pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
> drive-strength = <MTK_DRIVE_14mA>;
> - mediatek,pull-down-adv = <10>;
> + mediatek,pull-down-adv = <2>;
> };
>
> pins_rst {
> @@ -377,13 +377,13 @@ pins_cmd_dat {
> <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
> <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
> input-enable;
> - mediatek,pull-up-adv = <10>;
> + mediatek,pull-up-adv = <2>;
> };
>
> pins_clk {
> pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
> input-enable;
> - mediatek,pull-down-adv = <10>;
> + mediatek,pull-down-adv = <2>;
> };
>
> pins_pmu {
> @@ -401,13 +401,13 @@ pins_cmd_dat {
> <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
> drive-strength = <6>;
> input-enable;
> - mediatek,pull-up-adv = <10>;
> + mediatek,pull-up-adv = <2>;
> };
>
> pins_clk {
> pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
> drive-strength = <8>;
> - mediatek,pull-down-adv = <10>;
> + mediatek,pull-down-adv = <2>;
> input-enable;
> };
> };
next prev parent reply other threads:[~2025-09-09 17:17 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-22 17:11 [PATCH] arm64: dts: mediatek: mt8183: Fix out of range pull values Rob Herring (Arm)
2025-07-23 8:16 ` AngeloGioacchino Del Regno
2025-09-03 1:50 ` Rob Herring
2025-09-03 4:10 ` Chen-Yu Tsai
2025-09-09 12:42 ` Matthias Brugger [this message]
2025-09-09 12:42 ` Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cec6ee57-a32f-478a-8612-09fd334c334e@gmail.com \
--to=matthias.bgg@gmail.com \
--cc=Ben.Ho@mediatek.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=eballetbo@kernel.org \
--cc=fparent@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.