From: Quentin Schulz <quentin.schulz@cherry.de>
To: Coia Prant <coiaprant@gmail.com>, Simon Glass <sjg@chromium.org>,
Philipp Tomsich <philipp.tomsich@vrull.eu>,
Kever Yang <kever.yang@rock-chips.com>,
Jonas Karlman <jonas@kwiboo.se>
Cc: u-boot@lists.denx.de
Subject: Re: [PATCH v3] board: rockchip: Add support for 9Tripod X3568 v4
Date: Fri, 10 Jul 2026 10:51:47 +0200 [thread overview]
Message-ID: <cf43de1a-b2ef-4e98-ab06-fa78f299e3f0@cherry.de> (raw)
In-Reply-To: <20260709185101.2149485-1-coiaprant@gmail.com>
Hi Coia,
On 7/9/26 8:51 PM, Coia Prant wrote:
> The 9Tripod X3568 v4 is an RK3568-based SBC, just like the RK3568-EVB.
> It always uses soldered connections between the X3568CV2/X3568CV3/X3568CV4 core board
> and the X3568bv4 I/O board.
>
> The differences between the core boards
> - PCB size, layout
> - CPU (RK3568B2/RK3568J)
> - Memory type (DDR4/LPDDR4/LPDDR4X) and size
> - eMMC size
> - DSI/EDP resistor values
> Although the components vary, they maintain full compatibility.
>
> The X3568 board has multiple hardware revisions, and we currently support v4 (I/O board).
>
> Specification:
> - SoC: RockChip RK3568 ARM64 (4 cores)
> - eMMC: 16-128 GB
> - RAM: 2-16 GB
> - Power: DC 12V 2A
> - Ethernet: 2x YT8521SC RGMII (10/100/1000 Mbps)
> - Wireless radio: 802.11b/g/n/ac/ax dual-band
> - LED:
> Power: AlwaysOn
> User: GPIO
> - Button:
> VOL+: SARADC/0 <35k µV>
> VOL-: SARADC/0 <450k µV>
> Power/Reset: PMIC RK809
> - CAN
> CAN/1: 4-pin (PH 2.0)
> - PWM
> PWM/4: Backlight DSI/0 DSI/1
> PWM/7: IR Receiver [may not install]
> - UART:
> UART/2: Debug TTL - 1500000 8N1 (1.25mm)
> UART/3: TTL (PH 2.0)
> UART/4: TTL (PH 2.0)
> UART/8: AP6275S Bluetooth
> UART/9: TTL (PH 2.0)
> - I2C:
> I2C/0: PMIC RK809
> I2C/1: Touchscreen DSI/0 DSI/1
> I2C/4: Camera
> I2C/5: RTC@51 PCF8563
> - I2S:
> I2S/0: miniHDMI Sound
> I2S/1: RK809 Audio Codec
> I2S/3: AP6275S Bluetooth Sound
> - SDMMC:
> SDMMC/0: microSD (TF) slot
> SDMMC/2: AP6275S SDIO WiFi card
> - Camera: 1x CSI
> - Video: miniHDMI / DSI0 (MIPI/LVDS) / DSI1 (MIPI/EDP)
> - Audio: miniHDMI / MIC on-board / Speaker / SPDIF / 3.5mm Headphones / AP6275S Bluetooth
> - USB:
> USB 2.0 HOST x2
> USB 2.0 HOST x3 (4-pin)
> USB 2.0 OTG x1 (shared with USB 3.0 OTG/HOST) [slot may not install]
> USB 3.0 HOST x1
> USB 3.0 OTG/HOST x1
> - SATA: 1x SATA 3.0 with Power/4-pin [slot may not install]
> - PCIe: 1x PCIe 3.0 x2 (x4 connector) [power/clock/slot may not install]
>
> Link:
> - https://appletsapi.52solution.com/media/X3568V4%E5%BC%80%E5%8F%91%E6%9D%BF%E7%A1%AC%E4%BB%B6%E6%89%8B%E5%86%8C.pdf
> - https://blog.gov.cooking/archives/research-ninetripod-x3568-v4-and-flash.html
>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Thanks!
Quentin
next prev parent reply other threads:[~2026-07-10 8:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-09 18:51 [PATCH v3] board: rockchip: Add support for 9Tripod X3568 v4 Coia Prant
2026-07-10 8:51 ` Quentin Schulz [this message]
2026-07-10 13:17 ` Quentin Schulz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cf43de1a-b2ef-4e98-ab06-fa78f299e3f0@cherry.de \
--to=quentin.schulz@cherry.de \
--cc=coiaprant@gmail.com \
--cc=jonas@kwiboo.se \
--cc=kever.yang@rock-chips.com \
--cc=philipp.tomsich@vrull.eu \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.