Re: Audio volume poor in Linux, OK in Win2K

[Kalin KOZHUHAROV <kalin@thinrope.net>]

Steve Snyder wrote:
> I can't seem to get much volume out of my audio controller.
> 
> I have a dual-boot system, Win2K/SP4 and Fedora Core 2 (FC2), both with 
> all updates applied.  The volume is fine in Win2K.  In FC2, even with the 
> volume turned up to 100%, audio output is barely loud enough for voices 
> to be understood.  This is true whether using the built-in speakers or 
> with headphones.  The lack of volume is *not* application dependant.
> 
> Prior to installing FC2, I ran RedHat Linux v9 with the most recent 2.4.x 
> kernel available at that time.  The audio volume was also inadaquate in 
> this environment, yet was still fine in Win2K.
> 
> I see no errors or warning in my system logs that might indicate any 
> problems with the audio driver in use.
> 
> My hardware is a HP Presario 2570us notebook, which has an integrated ALi 
> M5451 audio controller.  More detail:
> 
> 00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link 
> Controller Audio Device (rev 02)
>         Subsystem: Hewlett-Packard Company: Unknown device 0850
>         Flags: bus master, medium devsel, latency 64, IRQ 5
>         I/O ports at 1000
>         Memory at d4000000 (32-bit, non-prefetchable) [size=4K]
>         Capabilities: [dc] Power Management version 2
> 
> These are the audio-related (kernel v2.6.8) modules seen with lsmod:
> 
>  snd_ali5451            18888  0
>  snd_ac97_codec         58500  1 snd_ali5451
>  snd_pcm                75912  1 snd_ali5451
>  snd_page_alloc          8584  1 snd_pcm
>  snd_timer              18692  1 snd_pcm
>  snd                    42596  4   
> snd_ali5451,snd_ac97_codec,snd_pcm,snd_timer
>  soundcore               6624  1 snd
> 
> It seems that the Linux audio subsystem is incapable of producing the 
> audio volume that I get in Win2K, at least with this hardware.  Is there 
> anything I can do to get more volume in Linux?

Yes, play with alsamixer and bump everything to 100% (and unmute it).
Mainly I guess you forgot the PCM control.
Some devicecs have "External Amplifier" switch, try that too.

If you are still with problems, please do:

$ alsactl -f current.conf store

and attach current.conf

Kalin.

-- 
 || ~~~~~~~~~~~~~~~~~~~~~~ ||
(  ) http://ThinRope.net/ (  )
 || ______________________ ||