Works: CompactFlash ATA device, with removable media Model Number: SanDisk SDCFB-128 Serial Number: 101913J0803Q3424 Firmware Revision: Vdi 1.24 Standards: Likely used: 4 Configuration: Logical max current cylinders 980 497 heads 8 8 sectors/track 32 63 -- bytes/track: 0 bytes/sector: 576 CHS current addressable sectors: 250488 LBA user addressable sectors: 250880 device size with M = 1024*1024: 122 MBytes device size with M = 1000*1000: 128 MBytes Capabilities: LBA, IORDY(may be)(cannot be disabled) Buffer size: 1.0kB bytes avail on r/w long: 4 Queue depth: 1 Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 1 Current = 1 DMA: not supported PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns does not works: ATA device, with non-removable media Model Number: SanDisk SDCFB-128 Serial Number: 109909E2004C5801 Firmware Revision: HDX 2.15 Standards: Supported: 10 Likely used: 10 Configuration: Logical max current cylinders 980 980 heads 8 8 sectors/track 32 32 -- CHS current addressable sectors: 250880 LBA user addressable sectors: 250880 device size with M = 1024*1024: 122 MBytes device size with M = 1000*1000: 128 MBytes Capabilities: LBA, IORDY(may be)(cannot be disabled) Queue depth: 1 Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 1 Current = 1 DMA: mdma0 mdma1 *mdma2 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns