All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Tyser <ptyser@xes-inc.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 0/3] Support for XPedite5370 and misc GPIO
Date: Mon, 27 Oct 2008 13:59:12 -0500	[thread overview]
Message-ID: <cover.1225133219.git.ptyser@xes-inc.com> (raw)

Hello,
This patch series adds support for the XPedite5370 SBC.
Its an MPC8572-based VPX card with a PMC/XMC site.  The
XPedite5370 includes a significant number of I2C GPIO devices (5)
which are used for board configuration.  I added support for
2 new I2C gpio devices in a new drivers/gpio directory.  I'm
not sure if this is the preferred location/method, so let me know
if others have have different preferences.  It'd be nice to have a
more generic GPIO framework (like Linux's) at some point, but
figured this was a step in the right direction by providing a
place for generic GPIO devices in drivers/gpio.

Thanks,
Peter

Changes since v1:
- Rebased to u-boot-mpc85xx tree
- Updated NOR flash remapping method
- Added CONFIG_SYS_I2C2_OFFSET define to XPEDITE5370.h
- Removed CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE from XPEDITE5370.h

Peter Tyser (3):
  pca953x: Add support for PCA953x I2C gpio devices
  ds4510: Add support for Maxim's DS4510 I2C device
  XPedite5370 board support

 MAINTAINERS                         |    3 +
 MAKEALL                             |    1 +
 Makefile                            |    5 +
 README                              |    9 +
 board/xes/common/Makefile           |   56 ++++
 board/xes/common/fsl_8572_clk.c     |   51 +++
 board/xes/common/fsl_85xx_ddr.c     |   93 ++++++
 board/xes/common/fsl_85xx_pci.c     |  264 ++++++++++++++++
 board/xes/xpedite5370/Makefile      |   45 +++
 board/xes/xpedite5370/config.mk     |   35 ++
 board/xes/xpedite5370/ddr.c         |  270 ++++++++++++++++
 board/xes/xpedite5370/law.c         |   54 ++++
 board/xes/xpedite5370/tlb.c         |   91 ++++++
 board/xes/xpedite5370/u-boot.lds    |  145 +++++++++
 board/xes/xpedite5370/xpedite5370.c |  126 ++++++++
 drivers/gpio/Makefile               |   48 +++
 drivers/gpio/ds4510.c               |  344 ++++++++++++++++++++
 drivers/gpio/pca953x.c              |  186 +++++++++++
 include/configs/XPEDITE5370.h       |  586 +++++++++++++++++++++++++++++++++++
 include/gpio/ds4510.h               |   75 +++++
 include/gpio/pca953x.h              |   39 +++
 21 files changed, 2526 insertions(+), 0 deletions(-)
 create mode 100644 board/xes/common/Makefile
 create mode 100644 board/xes/common/fsl_8572_clk.c
 create mode 100644 board/xes/common/fsl_85xx_ddr.c
 create mode 100644 board/xes/common/fsl_85xx_pci.c
 create mode 100644 board/xes/xpedite5370/Makefile
 create mode 100644 board/xes/xpedite5370/config.mk
 create mode 100644 board/xes/xpedite5370/ddr.c
 create mode 100644 board/xes/xpedite5370/law.c
 create mode 100644 board/xes/xpedite5370/tlb.c
 create mode 100644 board/xes/xpedite5370/u-boot.lds
 create mode 100644 board/xes/xpedite5370/xpedite5370.c
 create mode 100644 drivers/gpio/Makefile
 create mode 100644 drivers/gpio/ds4510.c
 create mode 100644 drivers/gpio/pca953x.c
 create mode 100644 include/configs/XPEDITE5370.h
 create mode 100644 include/gpio/ds4510.h
 create mode 100644 include/gpio/pca953x.h

             reply	other threads:[~2008-10-27 18:59 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-10-27 18:59 Peter Tyser [this message]
2008-10-27 18:59 ` [U-Boot] [PATCH v2 1/3] Add support for PCA953x I2C gpio devices Peter Tyser
2008-10-27 18:59   ` [U-Boot] [PATCH v2 2/3] Add support for Maxim's DS4510 I2C device Peter Tyser
2008-10-27 18:59     ` [U-Boot] [PATCH v2 3/3] XPedite5370 board support Peter Tyser
2008-10-27 21:46       ` Andy Fleming
2008-11-18 21:51         ` Wolfgang Denk
2008-11-18 22:14           ` Peter Tyser
2008-11-18 22:25             ` Wolfgang Denk
2008-11-18 21:50 ` [U-Boot] [PATCH v2 0/3] Support for XPedite5370 and misc GPIO Wolfgang Denk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.1225133219.git.ptyser@xes-inc.com \
    --to=ptyser@xes-inc.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.