From: Joe Perches <joe@perches.com>
To: linux-kernel@vger.kernel.org
Cc: amd64-microcode@amd64.org, kvm@vger.kernel.org,
netdev@vger.kernel.org, kexec@lists.infradead.org,
iommu@lists.linux-foundation.org, linux-crypto@vger.kernel.org,
linux-pm@lists.linux-foundation.org,
bonding-devel@lists.sourceforge.net
Subject: [PATCH 00/21] pr_dbg, pr_fmt
Date: Sun, 4 Oct 2009 18:18:14 -0700 [thread overview]
Message-ID: <cover.1254701151.git.joe@perches.com> (raw)
One possible long term goal is to stop adding
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
to source files to prefix modulename to logging output.
It might be useful to eventually have kernel.h
use a standard #define pr_fmt which includes KBUILD_MODNAME
instead of a blank or empty define.
Perhaps over time, the source modules that use pr_<level>
with prefixes can be converted to use pr_fmt.
If all modules are converted, that will allow the printk
routine to add module/filename/line/offset to the logging
lines using some function similar to dynamic_debug and
substantially reduct object string use by removing the
repeated prefixes.
This patchset does not get to that result. The patches
right now uses _more_ string space because all logging
messages have unshared prefixes but it may be a useful start.
The patchset strips prefixes from printks and adds pr_fmt to
arch/x86, crypto, kernel, and a few drivers.
It also converts printk(KERN_<level> to pr_<level> in a few files
that already had some pr_<level> uses.
The conversion also generally used long length format strings
in the place of multiple short strings to ease any grep/search.
Joe Perches (21):
include/linux/ dynamic_debug.h kernel.h: Remove KBUILD_MODNAME from dynamic_pr_debug, add #define pr_dbg
ftrace.c: Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
mtrr: use pr_<level> and pr_fmt
microcode: use pr_<level> and add pr_fmt
amd_iommu.c: use pr_<level> and add pr_fmt(fmt)
es7000_32.c: use pr_<level> and add pr_fmt(fmt)
arch/x86/kernel/apic/: use pr_<level> and add pr_fmt(fmt)
mcheck/: use pr_<level> and add pr_fmt(fmt)
arch/x86/kernel/setup_percpu.c: use pr_<level> and add pr_fmt(fmt)
arch/x86/kernel/cpu/: use pr_<level> and add pr_fmt(fmt)
i8254.c: Add pr_fmt(fmt)
kmmio.c: Add and use pr_fmt(fmt)
testmmiotrace.c: Add and use pr_fmt(fmt)
crypto/: use pr_<level> and add pr_fmt(fmt)
kernel/power/: use pr_<level> and add pr_fmt(fmt)
kernel/kexec.c: use pr_<level> and add pr_fmt(fmt)
crypto/async_tx/raid6test.c: use pr_<level> and add pr_fmt(fmt)
arch/x86/mm/mmio-mod.c: use pr_fmt
drivers/net/bonding/: : use pr_fmt
drivers/net/tlan: use pr_<level> and add pr_fmt(fmt)
drivers/net/tlan.h: Convert printk(KERN_DEBUG to pr_dbg(
arch/x86/kernel/amd_iommu.c | 71 ++--
arch/x86/kernel/apic/apic.c | 48 ++--
arch/x86/kernel/apic/apic_flat_64.c | 5 +-
arch/x86/kernel/apic/bigsmp_32.c | 8 +-
arch/x86/kernel/apic/es7000_32.c | 12 +-
arch/x86/kernel/apic/io_apic.c | 239 ++++++------
arch/x86/kernel/apic/nmi.c | 29 +-
arch/x86/kernel/apic/numaq_32.c | 53 ++--
arch/x86/kernel/apic/probe_32.c | 18 +-
arch/x86/kernel/apic/probe_64.c | 8 +-
arch/x86/kernel/apic/summit_32.c | 23 +-
arch/x86/kernel/apic/x2apic_uv_x.c | 26 +-
arch/x86/kernel/cpu/addon_cpuid_features.c | 9 +-
arch/x86/kernel/cpu/amd.c | 26 +-
arch/x86/kernel/cpu/bugs.c | 23 +-
arch/x86/kernel/cpu/bugs_64.c | 4 +-
arch/x86/kernel/cpu/centaur.c | 12 +-
arch/x86/kernel/cpu/common.c | 54 ++--
arch/x86/kernel/cpu/cpu_debug.c | 4 +-
arch/x86/kernel/cpu/cyrix.c | 12 +-
arch/x86/kernel/cpu/intel.c | 14 +-
arch/x86/kernel/cpu/intel_cacheinfo.c | 14 +-
arch/x86/kernel/cpu/mcheck/mce-inject.c | 20 +-
arch/x86/kernel/cpu/mcheck/mce.c | 59 ++--
arch/x86/kernel/cpu/mcheck/mce_intel.c | 8 +-
arch/x86/kernel/cpu/mcheck/p5.c | 21 +-
arch/x86/kernel/cpu/mcheck/therm_throt.c | 21 +-
arch/x86/kernel/cpu/mcheck/threshold.c | 7 +-
arch/x86/kernel/cpu/mcheck/winchip.c | 8 +-
arch/x86/kernel/cpu/mtrr/centaur.c | 4 +-
arch/x86/kernel/cpu/mtrr/cleanup.c | 59 ++--
arch/x86/kernel/cpu/mtrr/generic.c | 39 +-
arch/x86/kernel/cpu/mtrr/main.c | 32 +-
arch/x86/kernel/cpu/perf_event.c | 10 +-
arch/x86/kernel/cpu/perfctr-watchdog.c | 11 +-
arch/x86/kernel/cpu/transmeta.c | 20 +-
arch/x86/kernel/cpu/vmware.c | 11 +-
arch/x86/kernel/ftrace.c | 8 +-
arch/x86/kernel/microcode_amd.c | 5 +-
arch/x86/kernel/microcode_core.c | 23 +-
arch/x86/kernel/microcode_intel.c | 47 +--
arch/x86/kernel/setup_percpu.c | 13 +-
arch/x86/kvm/i8254.c | 12 +-
arch/x86/mm/kmmio.c | 40 +-
arch/x86/mm/mmio-mod.c | 71 ++--
arch/x86/mm/testmmiotrace.c | 29 +-
crypto/algapi.c | 4 +-
crypto/ansi_cprng.c | 39 +-
crypto/async_tx/async_tx.c | 5 +-
crypto/async_tx/raid6test.c | 30 +-
crypto/fips.c | 4 +-
crypto/tcrypt.c | 75 ++--
crypto/testmgr.c | 286 ++++++--------
crypto/xor.c | 17 +-
drivers/net/bonding/bond_3ad.c | 171 +++++----
drivers/net/bonding/bond_alb.c | 38 +--
drivers/net/bonding/bond_ipv6.c | 12 +-
drivers/net/bonding/bond_main.c | 608 +++++++++++-----------------
drivers/net/bonding/bond_sysfs.c | 322 ++++++---------
drivers/net/tlan.c | 135 +++---
drivers/net/tlan.h | 2 +-
include/linux/dynamic_debug.h | 13 +-
include/linux/kernel.h | 7 +-
kernel/kexec.c | 21 +-
kernel/power/hibernate.c | 46 +--
kernel/power/hibernate_nvs.c | 6 +-
kernel/power/process.c | 29 +-
kernel/power/snapshot.c | 36 +-
kernel/power/suspend.c | 18 +-
kernel/power/suspend_test.c | 18 +-
kernel/power/swap.c | 42 +-
kernel/power/swsusp.c | 10 +-
kernel/power/user.c | 8 +-
73 files changed, 1543 insertions(+), 1749 deletions(-)
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
WARNING: multiple messages have this Message-ID (diff)
From: Joe Perches <joe@perches.com>
To: linux-kernel@vger.kernel.org
Cc: x86@kernel.org, kvm@vger.kernel.org,
Frederic Weisbecker <fweisbec@gmail.com>,
Andreas Herrmann <andreas.herrmann3@amd.com>,
"H. Peter Anvin" <hpa@zytor.com>,
Samuel Chessman <chessman@tux.org>,
Thomas Gleixner <tglx@linutronix.de>,
Herbert Xu <herbert@gondor.apana.org.au>,
Jay Vosburgh <fubar@us.ibm.com>,
bonding-devel@lists.sourceforge.net,
Ingo Molnar <mingo@redhat.com>, Avi Kivity <avi@redhat.com>,
linux-crypto@vger.kernel.org, Len Brown <len.brown@intel.com>,
amd64-microcode@amd64.org, Joerg Roedel <joerg.roedel@amd.com>,
Maciej Sosnowski <maciej.sosnowski@intel.com>,
Steven Rostedt <rostedt@goodmis.org>,
Marcelo Tosatti <mtosatti@redhat.com>,
linux-pm@li.sts.linux-foundation.org,
Dan Williams <dan.j.williams@intel.com>,
netdev@vger.kernel.org, Tigran Aivazian
Subject: [PATCH 00/21] pr_dbg, pr_fmt
Date: Sun, 4 Oct 2009 17:53:27 -0700 [thread overview]
Message-ID: <cover.1254701151.git.joe@perches.com> (raw)
One possible long term goal is to stop adding
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
to source files to prefix modulename to logging output.
It might be useful to eventually have kernel.h
use a standard #define pr_fmt which includes KBUILD_MODNAME
instead of a blank or empty define.
Perhaps over time, the source modules that use pr_<level>
with prefixes can be converted to use pr_fmt.
If all modules are converted, that will allow the printk
routine to add module/filename/line/offset to the logging
lines using some function similar to dynamic_debug and
substantially reduct object string use by removing the
repeated prefixes.
This patchset does not get to that result. The patches
right now uses _more_ string space because all logging
messages have unshared prefixes but it may be a useful start.
The patchset strips prefixes from printks and adds pr_fmt to
arch/x86, crypto, kernel, and a few drivers.
It also converts printk(KERN_<level> to pr_<level> in a few files
that already had some pr_<level> uses.
The conversion also generally used long length format strings
in the place of multiple short strings to ease any grep/search.
Joe Perches (21):
include/linux/ dynamic_debug.h kernel.h: Remove KBUILD_MODNAME from dynamic_pr_debug, add #define pr_dbg
ftrace.c: Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
mtrr: use pr_<level> and pr_fmt
microcode: use pr_<level> and add pr_fmt
amd_iommu.c: use pr_<level> and add pr_fmt(fmt)
es7000_32.c: use pr_<level> and add pr_fmt(fmt)
arch/x86/kernel/apic/: use pr_<level> and add pr_fmt(fmt)
mcheck/: use pr_<level> and add pr_fmt(fmt)
arch/x86/kernel/setup_percpu.c: use pr_<level> and add pr_fmt(fmt)
arch/x86/kernel/cpu/: use pr_<level> and add pr_fmt(fmt)
i8254.c: Add pr_fmt(fmt)
kmmio.c: Add and use pr_fmt(fmt)
testmmiotrace.c: Add and use pr_fmt(fmt)
crypto/: use pr_<level> and add pr_fmt(fmt)
kernel/power/: use pr_<level> and add pr_fmt(fmt)
kernel/kexec.c: use pr_<level> and add pr_fmt(fmt)
crypto/async_tx/raid6test.c: use pr_<level> and add pr_fmt(fmt)
arch/x86/mm/mmio-mod.c: use pr_fmt
drivers/net/bonding/: : use pr_fmt
drivers/net/tlan: use pr_<level> and add pr_fmt(fmt)
drivers/net/tlan.h: Convert printk(KERN_DEBUG to pr_dbg(
arch/x86/kernel/amd_iommu.c | 71 ++--
arch/x86/kernel/apic/apic.c | 48 ++--
arch/x86/kernel/apic/apic_flat_64.c | 5 +-
arch/x86/kernel/apic/bigsmp_32.c | 8 +-
arch/x86/kernel/apic/es7000_32.c | 12 +-
arch/x86/kernel/apic/io_apic.c | 239 ++++++------
arch/x86/kernel/apic/nmi.c | 29 +-
arch/x86/kernel/apic/numaq_32.c | 53 ++--
arch/x86/kernel/apic/probe_32.c | 18 +-
arch/x86/kernel/apic/probe_64.c | 8 +-
arch/x86/kernel/apic/summit_32.c | 23 +-
arch/x86/kernel/apic/x2apic_uv_x.c | 26 +-
arch/x86/kernel/cpu/addon_cpuid_features.c | 9 +-
arch/x86/kernel/cpu/amd.c | 26 +-
arch/x86/kernel/cpu/bugs.c | 23 +-
arch/x86/kernel/cpu/bugs_64.c | 4 +-
arch/x86/kernel/cpu/centaur.c | 12 +-
arch/x86/kernel/cpu/common.c | 54 ++--
arch/x86/kernel/cpu/cpu_debug.c | 4 +-
arch/x86/kernel/cpu/cyrix.c | 12 +-
arch/x86/kernel/cpu/intel.c | 14 +-
arch/x86/kernel/cpu/intel_cacheinfo.c | 14 +-
arch/x86/kernel/cpu/mcheck/mce-inject.c | 20 +-
arch/x86/kernel/cpu/mcheck/mce.c | 59 ++--
arch/x86/kernel/cpu/mcheck/mce_intel.c | 8 +-
arch/x86/kernel/cpu/mcheck/p5.c | 21 +-
arch/x86/kernel/cpu/mcheck/therm_throt.c | 21 +-
arch/x86/kernel/cpu/mcheck/threshold.c | 7 +-
arch/x86/kernel/cpu/mcheck/winchip.c | 8 +-
arch/x86/kernel/cpu/mtrr/centaur.c | 4 +-
arch/x86/kernel/cpu/mtrr/cleanup.c | 59 ++--
arch/x86/kernel/cpu/mtrr/generic.c | 39 +-
arch/x86/kernel/cpu/mtrr/main.c | 32 +-
arch/x86/kernel/cpu/perf_event.c | 10 +-
arch/x86/kernel/cpu/perfctr-watchdog.c | 11 +-
arch/x86/kernel/cpu/transmeta.c | 20 +-
arch/x86/kernel/cpu/vmware.c | 11 +-
arch/x86/kernel/ftrace.c | 8 +-
arch/x86/kernel/microcode_amd.c | 5 +-
arch/x86/kernel/microcode_core.c | 23 +-
arch/x86/kernel/microcode_intel.c | 47 +--
arch/x86/kernel/setup_percpu.c | 13 +-
arch/x86/kvm/i8254.c | 12 +-
arch/x86/mm/kmmio.c | 40 +-
arch/x86/mm/mmio-mod.c | 71 ++--
arch/x86/mm/testmmiotrace.c | 29 +-
crypto/algapi.c | 4 +-
crypto/ansi_cprng.c | 39 +-
crypto/async_tx/async_tx.c | 5 +-
crypto/async_tx/raid6test.c | 30 +-
crypto/fips.c | 4 +-
crypto/tcrypt.c | 75 ++--
crypto/testmgr.c | 286 ++++++--------
crypto/xor.c | 17 +-
drivers/net/bonding/bond_3ad.c | 171 +++++----
drivers/net/bonding/bond_alb.c | 38 +--
drivers/net/bonding/bond_ipv6.c | 12 +-
drivers/net/bonding/bond_main.c | 608 +++++++++++-----------------
drivers/net/bonding/bond_sysfs.c | 322 ++++++---------
drivers/net/tlan.c | 135 +++---
drivers/net/tlan.h | 2 +-
include/linux/dynamic_debug.h | 13 +-
include/linux/kernel.h | 7 +-
kernel/kexec.c | 21 +-
kernel/power/hibernate.c | 46 +--
kernel/power/hibernate_nvs.c | 6 +-
kernel/power/process.c | 29 +-
kernel/power/snapshot.c | 36 +-
kernel/power/suspend.c | 18 +-
kernel/power/suspend_test.c | 18 +-
kernel/power/swap.c | 42 +-
kernel/power/swsusp.c | 10 +-
kernel/power/user.c | 8 +-
73 files changed, 1543 insertions(+), 1749 deletions(-)
WARNING: multiple messages have this Message-ID (diff)
From: Joe Perches <joe@perches.com>
To: linux-kernel@vger.kernel.org
Cc: x86@kernel.org, kvm@vger.kernel.org,
Frederic Weisbecker <fweisbec@gmail.com>,
Andreas Herrmann <andreas.herrmann3@amd.com>,
"H. Peter Anvin" <hpa@zytor.com>,
Samuel Chessman <chessman@tux.org>,
Thomas Gleixner <tglx@linutronix.de>,
Herbert Xu <herbert@gondor.apana.org.au>,
Jay Vosburgh <fubar@us.ibm.com>,
bonding-devel@lists.sourceforge.net,
Ingo Molnar <mingo@redhat.com>, Avi Kivity <avi@redhat.com>,
linux-crypto@vger.kernel.org, Len Brown <len.brown@intel.com>,
amd64-microcode@amd64.org, Joerg Roedel <joerg.roedel@amd.com>,
Maciej Sosnowski <maciej.sosnowski@intel.com>,
Steven Rostedt <rostedt@goodmis.org>,
Marcelo Tosatti <mtosatti@redhat.com>,
linux-pm@li.sts.linux-foundation.org,
Dan Williams <dan.j.williams@intel.com>,
netdev@vger.kernel.org, Tigran
Subject: [PATCH 00/21] pr_dbg, pr_fmt
Date: Sun, 4 Oct 2009 17:53:27 -0700 [thread overview]
Message-ID: <cover.1254701151.git.joe@perches.com> (raw)
One possible long term goal is to stop adding
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
to source files to prefix modulename to logging output.
It might be useful to eventually have kernel.h
use a standard #define pr_fmt which includes KBUILD_MODNAME
instead of a blank or empty define.
Perhaps over time, the source modules that use pr_<level>
with prefixes can be converted to use pr_fmt.
If all modules are converted, that will allow the printk
routine to add module/filename/line/offset to the logging
lines using some function similar to dynamic_debug and
substantially reduct object string use by removing the
repeated prefixes.
This patchset does not get to that result. The patches
right now uses _more_ string space because all logging
messages have unshared prefixes but it may be a useful start.
The patchset strips prefixes from printks and adds pr_fmt to
arch/x86, crypto, kernel, and a few drivers.
It also converts printk(KERN_<level> to pr_<level> in a few files
that already had some pr_<level> uses.
The conversion also generally used long length format strings
in the place of multiple short strings to ease any grep/search.
Joe Perches (21):
include/linux/ dynamic_debug.h kernel.h: Remove KBUILD_MODNAME from dynamic_pr_debug, add #define pr_dbg
ftrace.c: Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
mtrr: use pr_<level> and pr_fmt
microcode: use pr_<level> and add pr_fmt
amd_iommu.c: use pr_<level> and add pr_fmt(fmt)
es7000_32.c: use pr_<level> and add pr_fmt(fmt)
arch/x86/kernel/apic/: use pr_<level> and add pr_fmt(fmt)
mcheck/: use pr_<level> and add pr_fmt(fmt)
arch/x86/kernel/setup_percpu.c: use pr_<level> and add pr_fmt(fmt)
arch/x86/kernel/cpu/: use pr_<level> and add pr_fmt(fmt)
i8254.c: Add pr_fmt(fmt)
kmmio.c: Add and use pr_fmt(fmt)
testmmiotrace.c: Add and use pr_fmt(fmt)
crypto/: use pr_<level> and add pr_fmt(fmt)
kernel/power/: use pr_<level> and add pr_fmt(fmt)
kernel/kexec.c: use pr_<level> and add pr_fmt(fmt)
crypto/async_tx/raid6test.c: use pr_<level> and add pr_fmt(fmt)
arch/x86/mm/mmio-mod.c: use pr_fmt
drivers/net/bonding/: : use pr_fmt
drivers/net/tlan: use pr_<level> and add pr_fmt(fmt)
drivers/net/tlan.h: Convert printk(KERN_DEBUG to pr_dbg(
arch/x86/kernel/amd_iommu.c | 71 ++--
arch/x86/kernel/apic/apic.c | 48 ++--
arch/x86/kernel/apic/apic_flat_64.c | 5 +-
arch/x86/kernel/apic/bigsmp_32.c | 8 +-
arch/x86/kernel/apic/es7000_32.c | 12 +-
arch/x86/kernel/apic/io_apic.c | 239 ++++++------
arch/x86/kernel/apic/nmi.c | 29 +-
arch/x86/kernel/apic/numaq_32.c | 53 ++--
arch/x86/kernel/apic/probe_32.c | 18 +-
arch/x86/kernel/apic/probe_64.c | 8 +-
arch/x86/kernel/apic/summit_32.c | 23 +-
arch/x86/kernel/apic/x2apic_uv_x.c | 26 +-
arch/x86/kernel/cpu/addon_cpuid_features.c | 9 +-
arch/x86/kernel/cpu/amd.c | 26 +-
arch/x86/kernel/cpu/bugs.c | 23 +-
arch/x86/kernel/cpu/bugs_64.c | 4 +-
arch/x86/kernel/cpu/centaur.c | 12 +-
arch/x86/kernel/cpu/common.c | 54 ++--
arch/x86/kernel/cpu/cpu_debug.c | 4 +-
arch/x86/kernel/cpu/cyrix.c | 12 +-
arch/x86/kernel/cpu/intel.c | 14 +-
arch/x86/kernel/cpu/intel_cacheinfo.c | 14 +-
arch/x86/kernel/cpu/mcheck/mce-inject.c | 20 +-
arch/x86/kernel/cpu/mcheck/mce.c | 59 ++--
arch/x86/kernel/cpu/mcheck/mce_intel.c | 8 +-
arch/x86/kernel/cpu/mcheck/p5.c | 21 +-
arch/x86/kernel/cpu/mcheck/therm_throt.c | 21 +-
arch/x86/kernel/cpu/mcheck/threshold.c | 7 +-
arch/x86/kernel/cpu/mcheck/winchip.c | 8 +-
arch/x86/kernel/cpu/mtrr/centaur.c | 4 +-
arch/x86/kernel/cpu/mtrr/cleanup.c | 59 ++--
arch/x86/kernel/cpu/mtrr/generic.c | 39 +-
arch/x86/kernel/cpu/mtrr/main.c | 32 +-
arch/x86/kernel/cpu/perf_event.c | 10 +-
arch/x86/kernel/cpu/perfctr-watchdog.c | 11 +-
arch/x86/kernel/cpu/transmeta.c | 20 +-
arch/x86/kernel/cpu/vmware.c | 11 +-
arch/x86/kernel/ftrace.c | 8 +-
arch/x86/kernel/microcode_amd.c | 5 +-
arch/x86/kernel/microcode_core.c | 23 +-
arch/x86/kernel/microcode_intel.c | 47 +--
arch/x86/kernel/setup_percpu.c | 13 +-
arch/x86/kvm/i8254.c | 12 +-
arch/x86/mm/kmmio.c | 40 +-
arch/x86/mm/mmio-mod.c | 71 ++--
arch/x86/mm/testmmiotrace.c | 29 +-
crypto/algapi.c | 4 +-
crypto/ansi_cprng.c | 39 +-
crypto/async_tx/async_tx.c | 5 +-
crypto/async_tx/raid6test.c | 30 +-
crypto/fips.c | 4 +-
crypto/tcrypt.c | 75 ++--
crypto/testmgr.c | 286 ++++++--------
crypto/xor.c | 17 +-
drivers/net/bonding/bond_3ad.c | 171 +++++----
drivers/net/bonding/bond_alb.c | 38 +--
drivers/net/bonding/bond_ipv6.c | 12 +-
drivers/net/bonding/bond_main.c | 608 +++++++++++-----------------
drivers/net/bonding/bond_sysfs.c | 322 ++++++---------
drivers/net/tlan.c | 135 +++---
drivers/net/tlan.h | 2 +-
include/linux/dynamic_debug.h | 13 +-
include/linux/kernel.h | 7 +-
kernel/kexec.c | 21 +-
kernel/power/hibernate.c | 46 +--
kernel/power/hibernate_nvs.c | 6 +-
kernel/power/process.c | 29 +-
kernel/power/snapshot.c | 36 +-
kernel/power/suspend.c | 18 +-
kernel/power/suspend_test.c | 18 +-
kernel/power/swap.c | 42 +-
kernel/power/swsusp.c | 10 +-
kernel/power/user.c | 8 +-
73 files changed, 1543 insertions(+), 1749 deletions(-)
WARNING: multiple messages have this Message-ID (diff)
From: Joe Perches <joe@perches.com>
To: linux-kernel@vger.kernel.org
Cc: iommu@lists.linux-foundation.org, amd64-microcode@amd64.org,
kvm@vger.kernel.org, linux-crypto@vger.kernel.org,
bonding-devel@lists.sourceforge.net, netdev@vger.kernel.org,
kexec@lists.infradead.org, linux-pm@lists.linux-foundation.org
Subject: [PATCH 00/21] pr_dbg, pr_fmt
Date: Sun, 4 Oct 2009 18:18:14 -0700 [thread overview]
Message-ID: <cover.1254701151.git.joe@perches.com> (raw)
One possible long term goal is to stop adding
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
to source files to prefix modulename to logging output.
It might be useful to eventually have kernel.h
use a standard #define pr_fmt which includes KBUILD_MODNAME
instead of a blank or empty define.
Perhaps over time, the source modules that use pr_<level>
with prefixes can be converted to use pr_fmt.
If all modules are converted, that will allow the printk
routine to add module/filename/line/offset to the logging
lines using some function similar to dynamic_debug and
substantially reduct object string use by removing the
repeated prefixes.
This patchset does not get to that result. The patches
right now uses _more_ string space because all logging
messages have unshared prefixes but it may be a useful start.
The patchset strips prefixes from printks and adds pr_fmt to
arch/x86, crypto, kernel, and a few drivers.
It also converts printk(KERN_<level> to pr_<level> in a few files
that already had some pr_<level> uses.
The conversion also generally used long length format strings
in the place of multiple short strings to ease any grep/search.
Joe Perches (21):
include/linux/ dynamic_debug.h kernel.h: Remove KBUILD_MODNAME from dynamic_pr_debug, add #define pr_dbg
ftrace.c: Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
mtrr: use pr_<level> and pr_fmt
microcode: use pr_<level> and add pr_fmt
amd_iommu.c: use pr_<level> and add pr_fmt(fmt)
es7000_32.c: use pr_<level> and add pr_fmt(fmt)
arch/x86/kernel/apic/: use pr_<level> and add pr_fmt(fmt)
mcheck/: use pr_<level> and add pr_fmt(fmt)
arch/x86/kernel/setup_percpu.c: use pr_<level> and add pr_fmt(fmt)
arch/x86/kernel/cpu/: use pr_<level> and add pr_fmt(fmt)
i8254.c: Add pr_fmt(fmt)
kmmio.c: Add and use pr_fmt(fmt)
testmmiotrace.c: Add and use pr_fmt(fmt)
crypto/: use pr_<level> and add pr_fmt(fmt)
kernel/power/: use pr_<level> and add pr_fmt(fmt)
kernel/kexec.c: use pr_<level> and add pr_fmt(fmt)
crypto/async_tx/raid6test.c: use pr_<level> and add pr_fmt(fmt)
arch/x86/mm/mmio-mod.c: use pr_fmt
drivers/net/bonding/: : use pr_fmt
drivers/net/tlan: use pr_<level> and add pr_fmt(fmt)
drivers/net/tlan.h: Convert printk(KERN_DEBUG to pr_dbg(
arch/x86/kernel/amd_iommu.c | 71 ++--
arch/x86/kernel/apic/apic.c | 48 ++--
arch/x86/kernel/apic/apic_flat_64.c | 5 +-
arch/x86/kernel/apic/bigsmp_32.c | 8 +-
arch/x86/kernel/apic/es7000_32.c | 12 +-
arch/x86/kernel/apic/io_apic.c | 239 ++++++------
arch/x86/kernel/apic/nmi.c | 29 +-
arch/x86/kernel/apic/numaq_32.c | 53 ++--
arch/x86/kernel/apic/probe_32.c | 18 +-
arch/x86/kernel/apic/probe_64.c | 8 +-
arch/x86/kernel/apic/summit_32.c | 23 +-
arch/x86/kernel/apic/x2apic_uv_x.c | 26 +-
arch/x86/kernel/cpu/addon_cpuid_features.c | 9 +-
arch/x86/kernel/cpu/amd.c | 26 +-
arch/x86/kernel/cpu/bugs.c | 23 +-
arch/x86/kernel/cpu/bugs_64.c | 4 +-
arch/x86/kernel/cpu/centaur.c | 12 +-
arch/x86/kernel/cpu/common.c | 54 ++--
arch/x86/kernel/cpu/cpu_debug.c | 4 +-
arch/x86/kernel/cpu/cyrix.c | 12 +-
arch/x86/kernel/cpu/intel.c | 14 +-
arch/x86/kernel/cpu/intel_cacheinfo.c | 14 +-
arch/x86/kernel/cpu/mcheck/mce-inject.c | 20 +-
arch/x86/kernel/cpu/mcheck/mce.c | 59 ++--
arch/x86/kernel/cpu/mcheck/mce_intel.c | 8 +-
arch/x86/kernel/cpu/mcheck/p5.c | 21 +-
arch/x86/kernel/cpu/mcheck/therm_throt.c | 21 +-
arch/x86/kernel/cpu/mcheck/threshold.c | 7 +-
arch/x86/kernel/cpu/mcheck/winchip.c | 8 +-
arch/x86/kernel/cpu/mtrr/centaur.c | 4 +-
arch/x86/kernel/cpu/mtrr/cleanup.c | 59 ++--
arch/x86/kernel/cpu/mtrr/generic.c | 39 +-
arch/x86/kernel/cpu/mtrr/main.c | 32 +-
arch/x86/kernel/cpu/perf_event.c | 10 +-
arch/x86/kernel/cpu/perfctr-watchdog.c | 11 +-
arch/x86/kernel/cpu/transmeta.c | 20 +-
arch/x86/kernel/cpu/vmware.c | 11 +-
arch/x86/kernel/ftrace.c | 8 +-
arch/x86/kernel/microcode_amd.c | 5 +-
arch/x86/kernel/microcode_core.c | 23 +-
arch/x86/kernel/microcode_intel.c | 47 +--
arch/x86/kernel/setup_percpu.c | 13 +-
arch/x86/kvm/i8254.c | 12 +-
arch/x86/mm/kmmio.c | 40 +-
arch/x86/mm/mmio-mod.c | 71 ++--
arch/x86/mm/testmmiotrace.c | 29 +-
crypto/algapi.c | 4 +-
crypto/ansi_cprng.c | 39 +-
crypto/async_tx/async_tx.c | 5 +-
crypto/async_tx/raid6test.c | 30 +-
crypto/fips.c | 4 +-
crypto/tcrypt.c | 75 ++--
crypto/testmgr.c | 286 ++++++--------
crypto/xor.c | 17 +-
drivers/net/bonding/bond_3ad.c | 171 +++++----
drivers/net/bonding/bond_alb.c | 38 +--
drivers/net/bonding/bond_ipv6.c | 12 +-
drivers/net/bonding/bond_main.c | 608 +++++++++++-----------------
drivers/net/bonding/bond_sysfs.c | 322 ++++++---------
drivers/net/tlan.c | 135 +++---
drivers/net/tlan.h | 2 +-
include/linux/dynamic_debug.h | 13 +-
include/linux/kernel.h | 7 +-
kernel/kexec.c | 21 +-
kernel/power/hibernate.c | 46 +--
kernel/power/hibernate_nvs.c | 6 +-
kernel/power/process.c | 29 +-
kernel/power/snapshot.c | 36 +-
kernel/power/suspend.c | 18 +-
kernel/power/suspend_test.c | 18 +-
kernel/power/swap.c | 42 +-
kernel/power/swsusp.c | 10 +-
kernel/power/user.c | 8 +-
73 files changed, 1543 insertions(+), 1749 deletions(-)
next reply other threads:[~2009-10-05 1:18 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-05 0:53 Joe Perches [this message]
2009-10-05 1:18 ` [PATCH 00/21] pr_dbg, pr_fmt Joe Perches
2009-10-05 1:18 ` Joe Perches
2009-10-05 0:53 ` Joe Perches
2009-10-05 0:53 ` [PATCH 01/21] include/linux/ dynamic_debug.h kernel.h: Remove KBUILD_MODNAME from dynamic_pr_debug, add pr_dbg Joe Perches
2009-10-05 0:53 ` [PATCH 02/21] ftrace.c: Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Joe Perches
2009-10-05 13:10 ` Steven Rostedt
2009-10-05 17:21 ` Joe Perches
2009-10-05 17:32 ` Steven Rostedt
2009-10-12 6:10 ` [tip:tracing/core] " tip-bot for Joe Perches
2009-10-05 0:53 ` [PATCH 03/21] mtrr: use pr_<level> and pr_fmt Joe Perches
2009-10-05 0:53 ` [PATCH 04/21] microcode: use pr_<level> and add pr_fmt Joe Perches
2009-10-05 0:53 ` [PATCH 05/21] amd_iommu.c: use pr_<level> and add pr_fmt(fmt) Joe Perches
2009-10-12 15:00 ` Joerg Roedel
2009-10-12 17:00 ` Joe Perches
2009-10-05 0:53 ` [PATCH 06/21] es7000_32.c: " Joe Perches
2009-10-05 0:53 ` [PATCH 07/21] arch/x86/kernel/apic/: " Joe Perches
2009-10-05 0:53 ` [PATCH 08/21] mcheck/: " Joe Perches
2009-10-05 0:53 ` [PATCH 09/21] arch/x86/kernel/setup_percpu.c: " Joe Perches
2009-10-05 0:53 ` [PATCH 10/21] arch/x86/kernel/cpu/: " Joe Perches
2009-10-05 0:53 ` [PATCH 11/21] i8254.c: Add pr_fmt(fmt) Joe Perches
2009-10-05 0:53 ` [PATCH 12/21] kmmio.c: Add and use pr_fmt(fmt) Joe Perches
2009-10-05 0:53 ` [PATCH 13/21] testmmiotrace.c: " Joe Perches
2009-10-12 6:10 ` [tip:tracing/core] " tip-bot for Joe Perches
2009-10-05 0:53 ` [PATCH 14/21] crypto/: use pr_<level> and add pr_fmt(fmt) Joe Perches
2009-10-05 0:53 ` [PATCH 15/21] kernel/power/: " Joe Perches
2009-10-05 0:53 ` Joe Perches
2009-10-05 19:43 ` Rafael J. Wysocki
2009-10-05 19:43 ` Rafael J. Wysocki
2009-10-05 20:31 ` Joe Perches
2009-10-05 20:31 ` Joe Perches
2009-10-05 22:37 ` Rafael J. Wysocki
2009-10-05 22:37 ` Rafael J. Wysocki
2009-10-09 3:53 ` Joe Perches
2009-10-09 3:53 ` Joe Perches
2009-10-10 21:28 ` Rafael J. Wysocki
2009-10-10 21:28 ` Rafael J. Wysocki
2009-10-11 1:49 ` Joe Perches
2009-10-11 1:49 ` Joe Perches
2009-10-11 8:59 ` Pavel Machek
2009-10-11 8:59 ` Pavel Machek
2009-10-05 0:53 ` [PATCH 16/21] kernel/kexec.c: " Joe Perches
2009-10-05 0:53 ` Joe Perches
2009-10-05 12:01 ` Eric W. Biederman
2009-10-05 12:01 ` Eric W. Biederman
2009-10-05 17:57 ` Joe Perches
2009-10-05 17:57 ` Joe Perches
2009-10-05 0:53 ` [PATCH 17/21] crypto/async_tx/raid6test.c: " Joe Perches
2009-10-05 0:53 ` [PATCH 18/21] arch/x86/mm/mmio-mod.c: use pr_fmt Joe Perches
2009-10-05 0:53 ` [PATCH 19/21] drivers/net/bonding/: : " Joe Perches
2009-10-05 7:12 ` David Miller
2009-10-05 0:53 ` [PATCH 20/21] drivers/net/tlan: use pr_<level> and add pr_fmt(fmt) Joe Perches
2009-10-05 7:12 ` David Miller
2009-10-05 0:53 ` [PATCH 21/21] drivers/net/tlan.h: Convert printk(KERN_DEBUG to pr_dbg( Joe Perches
2009-10-05 7:12 ` David Miller
2009-10-05 7:16 ` Joe Perches
2009-10-05 7:20 ` David Miller
2009-10-05 21:15 ` Rafael J. Wysocki
2009-10-05 21:28 ` Joe Perches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1254701151.git.joe@perches.com \
--to=joe@perches.com \
--cc=amd64-microcode@amd64.org \
--cc=bonding-devel@lists.sourceforge.net \
--cc=iommu@lists.linux-foundation.org \
--cc=kexec@lists.infradead.org \
--cc=kvm@vger.kernel.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.