All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tobias Klauser <tklauser@distanz.ch>
To: linux-serial@vger.kernel.org
Cc: gregkh@suse.de, nios2-dev@sopc.et.ntust.edu.tw,
	linux-kernel@vger.kernel.org,
	Tobias Klauser <tklauser@distanz.ch>
Subject: [PATCHv3 0/2] serial: Drivers for Altera UARTs
Date: Fri,  5 Mar 2010 17:52:21 +0100	[thread overview]
Message-ID: <cover.1267807169.git.klto@zhaw.ch> (raw)

This is the third version of the patchset to add the serial drivers for the
Altera UARTs. I made the corrections suggested by Alan Cox on top of the second
version submitted on 01 Mar 2010.

Changes from v2 to v3:

 - altera_uart: Copy old termios settings back and set baud rate
 - altera_uart: Remove board specific DTR/DCD macros

Changes from v1 to v2:

 - altera_jtaguart: Implement altera_jtaguart_set_termios
 - altera_jtaguart: Protect port.tty in altera_jtaguart_rx_chars
 - altera_uart, altera_jtaguart: Don't depend on EMBEDDED
 - altera_jtaguart: Correct check for co->index
 - altera_uart: Correct check for co->index

Thanks,
Tobias

             reply	other threads:[~2010-03-05 16:52 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-03-05 16:52 Tobias Klauser [this message]
2010-03-05 16:52 ` [PATCHv3 1/2] serial: Add driver for the Altera JTAG UART Tobias Klauser
2010-03-12 20:48   ` Andrew Morton
2010-03-15 10:20     ` Tobias Klauser
2010-03-15 10:24       ` [Nios2-dev] " waltergoossens
2010-03-16  0:47     ` Thomas Chou
2010-03-16  0:47       ` Thomas Chou
2010-03-05 16:52 ` [PATCHv3 2/2] serial: Add driver for the Altera UART Tobias Klauser
2010-03-23 21:54   ` Andrew Morton
2010-03-24  6:47     ` Tobias Klauser
2010-03-24 11:05       ` Andrew Morton
2010-03-24 16:24         ` Tobias Klauser
2010-03-25  0:54           ` Thomas Chou
2010-03-29 13:29             ` Tobias Klauser
2010-03-30  0:18               ` Thomas Chou

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.1267807169.git.klto@zhaw.ch \
    --to=tklauser@distanz.ch \
    --cc=gregkh@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=nios2-dev@sopc.et.ntust.edu.tw \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.