All of lore.kernel.org
 help / color / mirror / Atom feed
From: u-boot at lakedaemon.net <u-boot@lakedaemon.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/1 v4] RFC: Dreamplug support
Date: Mon, 13 Jun 2011 15:54:11 +0000	[thread overview]
Message-ID: <cover.1307979826.git.u-boot@lakedaemon.net> (raw)

From: Jason Cooper <u-boot@lakedaemon.net>

It compiles clean, and I've loaded it via JTAG and used it to dump the
existing bootloader out of the SPI flash.  I have _not_ used it to burn
itself to the flash yet.  I'm looking for comments before I try that. ;-)

Some concerns:

	- The SPI flash chip is a Macronix MX25L1606, however it has the
	  identical chip idcode to the MX25L1605.  How is that properly
	  handled?  The 06 does have some new features [1].

[1] http://www.macronix.com/QuickPlace/hq/PageLibrary4825740B00298A3B.nsf/h_Index/5F41CDDCB837422C48257639003E5EC3/$File/AN055-Migrate_to_MX25L1606E_and_MX25L8006E-1.2.pdf


Changes from v1 to v2:

	- resorted series to move 'make all' support last.

Changes from v2 to v3:

	- Use MACH_TYPE_GURUPLUG for now until dreamplug support is in Linux.
	- Update MAINTAINERS.
	- Collapse into one patch.

Changes from v3 to v4:

	- update copyright info as recommended by Prafulla Wadaskar.
	- maintain proper order in boards.cfg, MAINTAINERS, etc.
	- label MPP's
	- change back to MACH_TYPE_DREAMPLUG.  This patch is just RFC
	  until the Dreamplug is supported in Linux (and MACH_TYPE_ added).


Jason Cooper (1):
  dreamplug: Initial support.

 MAINTAINERS                          |    4 +
 MAKEALL                              |    1 +
 board/Marvell/dreamplug/Makefile     |   54 +++++++++++
 board/Marvell/dreamplug/dreamplug.c  |  157 ++++++++++++++++++++++++++++++++
 board/Marvell/dreamplug/dreamplug.h  |   42 +++++++++
 board/Marvell/dreamplug/kwbimage.cfg |  163 ++++++++++++++++++++++++++++++++++
 boards.cfg                           |    1 +
 include/configs/dreamplug.h          |  114 ++++++++++++++++++++++++
 8 files changed, 536 insertions(+), 0 deletions(-)
 create mode 100644 board/Marvell/dreamplug/Makefile
 create mode 100644 board/Marvell/dreamplug/dreamplug.c
 create mode 100644 board/Marvell/dreamplug/dreamplug.h
 create mode 100644 board/Marvell/dreamplug/kwbimage.cfg
 create mode 100644 include/configs/dreamplug.h

             reply	other threads:[~2011-06-13 15:54 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-13 15:54 u-boot at lakedaemon.net [this message]
2011-06-13 15:54 ` [U-Boot] [PATCH 1/1 v4] RFC: dreamplug: Initial support u-boot at lakedaemon.net
2011-06-13 15:59   ` Prafulla Wadaskar
2011-06-13 16:07     ` Jason
2011-06-13 16:46       ` Wolfgang Denk
2011-06-13 16:51         ` Jason
2011-07-21 19:36           ` Clint Adams
2011-07-21 20:26             ` Jason
2011-07-21 20:56               ` Clint Adams
2011-07-21 21:17                 ` Jason
2011-07-26 21:19   ` [U-Boot] RFC [PATCH 0/5 v5] add dreamplug support Jason Cooper
2011-09-11 22:10     ` [U-Boot] [PATCH v6] dreamplug: initial board support u-boot at lakedaemon.net
2011-09-12  7:37       ` Igor Grinberg
2011-09-12 11:36         ` Jason
2011-09-12 11:45       ` [U-Boot] [PATCH v7] " Jason Cooper
2011-09-13  7:32         ` Igor Grinberg
2011-09-13 13:53           ` Jason
2011-09-13 11:56         ` Prafulla Wadaskar
2011-09-13 13:00           ` Wolfgang Denk
2011-09-13 14:17             ` Jason
2011-09-14  6:39               ` Prafulla Wadaskar
2011-09-18 17:58                 ` Albert ARIBAUD
2011-09-18 18:27                   ` Albert ARIBAUD
2011-09-18 18:39                   ` Jason
2011-09-18 20:28                     ` Wolfgang Denk
2011-09-18 20:58                       ` Jason
2011-09-18 19:06         ` [U-Boot] [PATCH v8] " Jason Cooper
2011-10-03  4:37           ` Prafulla Wadaskar
2011-07-26 21:19   ` [U-Boot] RFC [PATCH 1/5] drivers/rtc: add Marvell Integrated RTC Jason Cooper
2011-07-27 18:12     ` Prafulla Wadaskar
2011-07-28  1:22       ` Jason
2011-07-28 19:09         ` Prafulla Wadaskar
2011-07-26 21:19   ` [U-Boot] RFC [PATCH 2/5] arm/kirkwood: print speeds with cpu info Jason Cooper
2011-07-27 18:21     ` Prafulla Wadaskar
2011-07-28  1:31       ` Jason
2011-07-28 19:14         ` Prafulla Wadaskar
2011-10-06 18:13     ` Wolfgang Denk
2011-10-07 12:37       ` Jason
2011-07-26 21:19   ` [U-Boot] RFC [PATCH 3/5] usb: Some EHCI chipsets are slow to respond Jason Cooper
2011-07-27 18:23     ` Prafulla Wadaskar
2011-07-28  1:37       ` Jason
2011-07-28 19:16         ` Prafulla Wadaskar
2011-07-29 14:31           ` Jason
2011-07-26 21:19   ` [U-Boot] RFC [PATCH 4/5 v5] dreamplug: initial board support Jason Cooper
2011-07-27 18:38     ` Prafulla Wadaskar
2011-07-28  2:02       ` Jason
2011-07-28 19:37         ` Prafulla Wadaskar
2011-07-29 15:18           ` Jason
2011-07-29 18:57             ` Prafulla Wadaskar
2011-07-29 19:43               ` Jason
2011-10-06 18:15     ` Wolfgang Denk
2011-10-07 12:40       ` Jason
2011-07-26 21:19   ` [U-Boot] RFC [PATCH 5/5 v5] dreamplug: use MACH_TYPE_DREAMPLUG Jason Cooper
2011-07-27 18:40     ` Prafulla Wadaskar
2011-07-28  2:08       ` Jason
2011-07-28  7:25         ` Bdale Garbee
2011-07-28 12:43           ` Jason
2011-07-28 13:44             ` Bdale Garbee
2011-07-28 19:39         ` Prafulla Wadaskar
2011-07-29 15:25           ` Jason

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.1307979826.git.u-boot@lakedaemon.net \
    --to=u-boot@lakedaemon.net \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.