All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jani Nikula <jani.nikula@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: jani.nikula@intel.com, yogesh.mohan.marimuthu@intel.com
Subject: [PATCH 00/14] drm/i915: Baytrail MIPI DSI support
Date: Tue, 13 Aug 2013 16:29:39 +0300	[thread overview]
Message-ID: <cover.1376397804.git.jani.nikula@intel.com> (raw)

Hi all -

This series adds rudimentary MIPI DSI support to Baytrail. It's been
built around the idea of panel specific sub-encoders, similar to the DVO
support we have. This work is by no means complete; there are plenty of
rough edges, but it should be a somewhat sane start to build upon.

I'm aware of the Common Display Framework and drm_bridge patches. In the
future, I expect our DSI support to be ported over to whatever
eventually comes out of them. In the mean time, we can't wait for them
to be completed, and I believe it would be helpful for that effort to
have our bits and pieces upstream.

The last patch is provided as an (incomplete) example of a sub-encoder,
or a panel driver. It should *not* be merged. There's no proper
detection or VBT handling yet, so that will cause warnings about
inconsistent crtc/pll states...


BR,
Jani.



Jani Nikula (9):
  drm/i915: add more VLV IOSF sideband ports accessors
  drm/i915: add VLV pipeconf bit definition for DSI PLL lock
  drm/i915: add MIPI DSI register definitions
  drm/i915: add MIPI DSI output type and subtypes
  drm/i915: add structs for MIPI DSI output
  drm/i915: add MIPI DSI command sending routines
  drm/i915: add basic MIPI DSI output support
  drm/i915: don't enable DPLL for DSI
  drm/i915: initialize DSI output on VLV

Shobhit Kumar (4):
  drm: add MIPI DSI encoder and connector types
  drm/i915: Band Gap WA
  drm/i915: Parse the MIPI related VBT Block and store relevant info
  drm/i915: add AUO MIPI DSI display sub-encoder

ymohanma (1):
  drm/i915: add VLV DSI PLL Calculations

 drivers/gpu/drm/drm_crtc.c             |    2 +
 drivers/gpu/drm/i915/Makefile          |    4 +
 drivers/gpu/drm/i915/auo_dsi_display.c |  182 ++++++++++
 drivers/gpu/drm/i915/i915_drv.h        |   13 +
 drivers/gpu/drm/i915/i915_reg.h        |  424 ++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_bios.c      |   16 +
 drivers/gpu/drm/i915/intel_bios.h      |   41 +++
 drivers/gpu/drm/i915/intel_display.c   |   52 ++-
 drivers/gpu/drm/i915/intel_drv.h       |    7 +-
 drivers/gpu/drm/i915/intel_dsi.c       |  606 ++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_dsi.h       |  104 ++++++
 drivers/gpu/drm/i915/intel_dsi_cmd.c   |  442 +++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_dsi_cmd.h   |  109 ++++++
 drivers/gpu/drm/i915/intel_dsi_pll.c   |  290 +++++++++++++++
 drivers/gpu/drm/i915/intel_sideband.c  |   56 +++
 include/uapi/drm/drm_mode.h            |    2 +
 16 files changed, 2330 insertions(+), 20 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/auo_dsi_display.c
 create mode 100644 drivers/gpu/drm/i915/intel_dsi.c
 create mode 100644 drivers/gpu/drm/i915/intel_dsi.h
 create mode 100644 drivers/gpu/drm/i915/intel_dsi_cmd.c
 create mode 100644 drivers/gpu/drm/i915/intel_dsi_cmd.h
 create mode 100644 drivers/gpu/drm/i915/intel_dsi_pll.c

-- 
1.7.9.5

             reply	other threads:[~2013-08-13 13:28 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-13 13:29 Jani Nikula [this message]
2013-08-13 13:29 ` [PATCH 01/14] drm: add MIPI DSI encoder and connector types Jani Nikula
2013-08-13 13:29 ` [PATCH 02/14] drm/i915: add more VLV IOSF sideband ports accessors Jani Nikula
2013-08-13 13:29 ` [PATCH 03/14] drm/i915: add VLV pipeconf bit definition for DSI PLL lock Jani Nikula
2013-08-13 13:29 ` [PATCH 04/14] drm/i915: add MIPI DSI register definitions Jani Nikula
2013-08-14 13:59   ` Ville Syrjälä
2013-08-15  8:02     ` Jani Nikula
2013-08-15 13:38   ` Damien Lespiau
2013-08-15 14:08     ` Daniel Vetter
2013-08-13 13:29 ` [PATCH 05/14] drm/i915: add MIPI DSI output type and subtypes Jani Nikula
2013-08-13 13:29 ` [PATCH 06/14] drm/i915: add structs for MIPI DSI output Jani Nikula
2013-08-13 13:29 ` [PATCH 07/14] drm/i915: add MIPI DSI command sending routines Jani Nikula
2013-08-13 13:29 ` [PATCH 08/14] drm/i915: add basic MIPI DSI output support Jani Nikula
2013-08-13 22:17   ` Daniel Vetter
2013-08-13 13:29 ` [PATCH 09/14] drm/i915: add VLV DSI PLL Calculations Jani Nikula
2013-08-13 13:29 ` [PATCH 10/14] drm/i915: don't enable DPLL for DSI Jani Nikula
2013-08-13 13:29 ` [PATCH 11/14] drm/i915: Band Gap WA Jani Nikula
2013-08-13 13:29 ` [PATCH 12/14] drm/i915: Parse the MIPI related VBT Block and store relevant info Jani Nikula
2013-08-13 13:29 ` [PATCH 13/14] drm/i915: initialize DSI output on VLV Jani Nikula
2013-08-13 13:29 ` [PATCH 14/14] drm/i915: add AUO MIPI DSI display sub-encoder Jani Nikula

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.1376397804.git.jani.nikula@intel.com \
    --to=jani.nikula@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=yogesh.mohan.marimuthu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.