From: Sudeep Dutt <sudeep.dutt@intel.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Dan Williams <dan.j.williams@intel.com>
Cc: Siva Yerramreddy <yshivakrishna@gmail.com>,
Ashutosh Dixit <ashutosh.dixit@intel.com>,
Nikhil Rao <nikhil.rao@intel.com>,
Sudeep Dutt <sudeep.dutt@intel.com>,
linux-kernel@vger.kernel.org, dmaengine@vger.kernel.org
Subject: [PATCH char-misc-next v2 0/8] Enable dma driver for MIC X100 Coprocessors
Date: Thu, 29 May 2014 14:23:57 -0700 [thread overview]
Message-ID: <cover.1401397315.git.sudeep.dutt@intel.com> (raw)
ChangeLog:
=========
v1 => v2:
a) MIC bus driver cleanups and device release callback fix in patch 2,
as per feedback from Greg Kroah-Hartman.
v1: Initial post @ https://lkml.org/lkml/2014/5/27/819
These patches are being sent to char-misc because there is a dependency
between the patches for dma driver and other drivers.
Description:
============
This set of patches add support for MIC X100 dma driver.
MIC PCIe card has a dma controller with 8 channels. These channels are
shared between the host s/w and the card s/w. 0 to 3 are used by host
nd 4 to 7 by card. As the dma device doesn't show up as PCIe device,
a virtual bus called mic bus is created and virtual dma devices are
created on it by the host/card drivers. On host the channels are private
and used only by the host driver to transfer data for the virtio devices.
Here is a higher level block diagram.
|
+----------+ | +----------+
| Card OS | | | Host OS |
+----------+ | +----------+
|
+-------+ +--------+ +------+ | +---------+ +--------+ +--------+
| Virtio| |Virtio | |Virtio| | |Virtio | |Virtio | |Virtio |
| Net | |Console | |Block | | |Net | |Console | |Block |
| Driver| |Driver | |Driver| | |backend | |backend | |backend |
+-------+ +--------+ +------+ | +---------+ +--------+ +--------+
| | | | | | |
| | | |User | | |
| | | |------|------------|---------|-------
+-------------------+ |Kernel +--------------------------+
| | | Virtio over PCIe IOCTLs |
| | +--------------------------+
+-----------+ | | | +-----------+
| MIC DMA | | | | | MIC DMA |
| Driver | | | | | Driver |
+-----------+ | | | +-----------+
| | | | |
+---------------+ | | | +----------------+
|MIC virtual Bus| | | | |MIC virtual Bus |
+---------------+ | | | +----------------+
| | | | |
| +--------------+ | +---------------+ |
| |Intel MIC | | |Intel MIC | |
+---|Card Driver | | |Host Driver | |
+--------------+ | +---------------+-----+
| | |
+-------------------------------------------------------------+
| |
| PCIe Bus |
+-------------------------------------------------------------+
The following series of patches are partitioned as follows:
Patch 1: Add mic bus and dma driver documentation.
Author: Siva Yerramreddy
Patch 2: Add a bus driver for virtual MIC devices.
Authors: Siva Yerramreddy, Sudeep Dutt
Patch 3: MIC X100 DMA Driver.
Author: Siva Yerramreddy
Patch 4: Add threaded irq support in host driver.
This is needed as the dma driver uses threaded irq.
Author: Siva Yerramreddy
Patch 5: Use dma to transfer data between MIC and host.
Authors: Siva Yerramreddy, Ashutosh Dixit
Patch 6: Add threaded irq support in mic_request_card_irq.
This is needed as the dma driver uses threaded irq.
Author: Siva Yerramreddy
Patch 7: Add dma device on mic bus.
Author: Siva Yerramreddy
Patch 8: Modify the mpss script to load/unload mic_x100_dma.ko.
Author: Siva Yerramreddy
The patches have been compiled/validated against v3.15-rc3. Tested using
dmatest module with module parameter "threads_per_chan=60". These patches
have also been scanned by Fengguang Wu's 0-day infrastructure and no
issues have been reported.
Thanks to Dan Williams, Vinod Koul, Jon Mason, Dave Jiang for the initial
review.
Siva Yerramreddy (7):
misc: mic: Add mic bus and dma driver documentation
dma: MIC X100 DMA Driver
misc: mic: add threaded irq support in host driver
misc: mic: add dma support in host driver
misc: mic: add threaded irq support in card driver
misc: mic: add dma support in card driver
misc: mic: add support for loading/unloading dma driver
Sudeep Dutt (1):
misc: mic: add a bus driver for virtual MIC devices
Documentation/mic/mic_overview.txt | 67 ++--
Documentation/mic/mpssd/mpss | 14 +-
drivers/dma/Kconfig | 19 +
drivers/dma/Makefile | 1 +
drivers/dma/mic_x100_dma.c | 774 +++++++++++++++++++++++++++++++++++++
drivers/dma/mic_x100_dma.h | 286 ++++++++++++++
drivers/misc/mic/Kconfig | 21 +-
drivers/misc/mic/Makefile | 1 +
drivers/misc/mic/bus/Makefile | 5 +
drivers/misc/mic/bus/mic_bus.c | 219 +++++++++++
drivers/misc/mic/card/mic_device.c | 23 +-
drivers/misc/mic/card/mic_device.h | 9 +-
drivers/misc/mic/card/mic_virtio.c | 7 +-
drivers/misc/mic/card/mic_x100.c | 55 ++-
drivers/misc/mic/host/mic_boot.c | 83 +++-
drivers/misc/mic/host/mic_device.h | 24 ++
drivers/misc/mic/host/mic_intr.c | 121 +++---
drivers/misc/mic/host/mic_intr.h | 27 +-
drivers/misc/mic/host/mic_main.c | 5 +-
drivers/misc/mic/host/mic_virtio.c | 187 +++++++--
drivers/misc/mic/host/mic_virtio.h | 21 +-
drivers/misc/mic/host/mic_x100.c | 8 +
include/linux/mic_bus.h | 112 ++++++
23 files changed, 1938 insertions(+), 151 deletions(-)
create mode 100644 drivers/dma/mic_x100_dma.c
create mode 100644 drivers/dma/mic_x100_dma.h
create mode 100644 drivers/misc/mic/bus/Makefile
create mode 100644 drivers/misc/mic/bus/mic_bus.c
create mode 100644 include/linux/mic_bus.h
--
1.8.2.1
next reply other threads:[~2014-05-29 21:24 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-29 21:23 Sudeep Dutt [this message]
2014-05-29 21:23 ` [PATCH char-misc-next v2 1/8] misc: mic: Add mic bus and dma driver documentation Sudeep Dutt
2014-05-29 21:23 ` [PATCH char-misc-next v2 2/8] misc: mic: add a bus driver for virtual MIC devices Sudeep Dutt
2014-07-10 0:42 ` Greg Kroah-Hartman
2014-07-10 16:43 ` Sudeep Dutt
2014-05-29 21:24 ` [PATCH char-misc-next v2 3/8] dma: MIC X100 DMA Driver Sudeep Dutt
2014-07-10 0:42 ` Greg Kroah-Hartman
2014-05-29 21:24 ` [PATCH char-misc-next v2 4/8] misc: mic: add threaded irq support in host driver Sudeep Dutt
2014-05-29 21:24 ` [PATCH char-misc-next v2 5/8] misc: mic: add dma " Sudeep Dutt
2014-05-29 21:24 ` [PATCH char-misc-next v2 6/8] misc: mic: add threaded irq support in card driver Sudeep Dutt
2014-05-29 21:24 ` [PATCH char-misc-next v2 7/8] misc: mic: add dma " Sudeep Dutt
2014-05-29 21:24 ` [PATCH char-misc-next v2 8/8] misc: mic: add support for loading/unloading dma driver Sudeep Dutt
2014-06-16 15:58 ` [PATCH char-misc-next v2 0/8] Enable dma driver for MIC X100 Coprocessors Sudeep Dutt
2014-06-30 15:33 ` Sudeep Dutt
2014-06-30 16:27 ` Greg Kroah-Hartman
2014-06-30 19:04 ` Sudeep Dutt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1401397315.git.sudeep.dutt@intel.com \
--to=sudeep.dutt@intel.com \
--cc=ashutosh.dixit@intel.com \
--cc=dan.j.williams@intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nikhil.rao@intel.com \
--cc=yshivakrishna@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.