[PATCH v3 0/5] Beaglebone-Black HDMI audio

[Jyri Sarha <jsarha@ti.com>]

Changes since v2:
- Change compatible property from "ti,gpio-clock" to "ti,gpio-gate-clock"
- Some minor cleanups

The code has a functional dependency to:
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg109264.html

Without the above patch the audio card does not probe.

The code has been rebased on top of Linux 3.17-rc5. The patches
bellow, the above dependency, and couple of commits to add BBB HDMI audio
support to omap2plus_defconfig can be pulled from:

https://github.com/jsarha/linux.git linux-master-bbb-hdmi-audio

Cheers,
Jyri

Jyri Sarha (5):
  clk: ti: add "ti,gpio-gate-clock" controlled clock
  drm/tilcdc: Add I2S HDMI audio config for tda998x
  ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S
    bus
  ASoC: davinci: HDMI audio build for AM33XX and TDA998x
  ARM: dts: am335x-boneblack: Add HDMI audio support

 .../bindings/clock/ti/gpio-gate-clock.txt          |   21 ++
 .../bindings/sound/davinci-evm-audio.txt           |    6 +-
 arch/arm/boot/dts/am335x-boneblack.dts             |   52 +++++
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/gpio.c                              |  202 ++++++++++++++++++++
 drivers/gpu/drm/tilcdc/tilcdc_slave.c              |   24 ++-
 sound/soc/davinci/Kconfig                          |   12 ++
 sound/soc/davinci/davinci-evm.c                    |   82 +++++++-
 8 files changed, 395 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/gpio-gate-clock.txt
 create mode 100644 drivers/clk/ti/gpio.c

-- 
1.7.9.5