* [PATCH 28/31] MIPS: Kconfig: Disable SMP/CPS for 64-bit
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
@ 2014-11-25 9:15 ` Ralf Baechle
2015-01-07 11:28 ` [PATCH 09/31] MIPS: Netlogic: Fix for SATA PHY init Ralf Baechle
` (29 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2014-11-25 9:15 UTC (permalink / raw)
To: stable
From: Markos Chandras <markos.chandras@imgtec.com>
A 64-bit build for Malta produces far too many build problems
when SMP/CPS is selected. Moreover, there is currently no 64-bit
product with SMP/CPS so we disable SMP/CPS when building for
64-bit until it is properly supported.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8573/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 7222592..6e53238 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2177,7 +2177,7 @@ config MIPS_CMP
config MIPS_CPS
bool "MIPS Coherent Processing System support"
- depends on SYS_SUPPORTS_MIPS_CPS
+ depends on SYS_SUPPORTS_MIPS_CPS && !64BIT
select MIPS_CM
select MIPS_CPC
select MIPS_CPS_PM if HOTPLUG_CPU
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 09/31] MIPS: Netlogic: Fix for SATA PHY init
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
2014-11-25 9:15 ` [PATCH 28/31] MIPS: Kconfig: Disable SMP/CPS for 64-bit Ralf Baechle
@ 2015-01-07 11:28 ` Ralf Baechle
2015-01-15 15:41 ` [PATCH 26/31] MIPS: smp-cps: cpu_set FPU mask if FPU present Ralf Baechle
` (28 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-01-07 11:28 UTC (permalink / raw)
To: stable
From: Ganesan Ramalingam <ganesanr@broadcom.com>
Update to the SATA PHY initialization. This is needed for SATA detection
to succeed in all configurations.
Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com>
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8886/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/netlogic/xlp/ahci-init-xlp2.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/mips/netlogic/xlp/ahci-init-xlp2.c b/arch/mips/netlogic/xlp/ahci-init-xlp2.c
index c83dbf3..7b066a4 100644
--- a/arch/mips/netlogic/xlp/ahci-init-xlp2.c
+++ b/arch/mips/netlogic/xlp/ahci-init-xlp2.c
@@ -203,6 +203,7 @@ static u8 read_phy_reg(u64 regbase, u32 addr, u32 physel)
static void config_sata_phy(u64 regbase)
{
u32 port, i, reg;
+ u8 val;
for (port = 0; port < 2; port++) {
for (i = 0, reg = RXCDRCALFOSC0; reg <= CALDUTY; reg++, i++)
@@ -210,6 +211,18 @@ static void config_sata_phy(u64 regbase)
for (i = 0, reg = RXDPIF; reg <= PPMDRIFTMAX_HI; reg++, i++)
write_phy_reg(regbase, reg, port, sata_phy_config2[i]);
+
+ /* Fix for PHY link up failures at lower temperatures */
+ write_phy_reg(regbase, 0x800F, port, 0x1f);
+
+ val = read_phy_reg(regbase, 0x0029, port);
+ write_phy_reg(regbase, 0x0029, port, val | (0x7 << 1));
+
+ val = read_phy_reg(regbase, 0x0056, port);
+ write_phy_reg(regbase, 0x0056, port, val & ~(1 << 3));
+
+ val = read_phy_reg(regbase, 0x0018, port);
+ write_phy_reg(regbase, 0x0018, port, val & ~(0x7 << 0));
}
}
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 26/31] MIPS: smp-cps: cpu_set FPU mask if FPU present
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
2014-11-25 9:15 ` [PATCH 28/31] MIPS: Kconfig: Disable SMP/CPS for 64-bit Ralf Baechle
2015-01-07 11:28 ` [PATCH 09/31] MIPS: Netlogic: Fix for SATA PHY init Ralf Baechle
@ 2015-01-15 15:41 ` Ralf Baechle
2015-02-23 5:17 ` [PATCH 23/31] MIPS: ralink: Fix bad config symbol in PCI makefile Ralf Baechle
` (27 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-01-15 15:41 UTC (permalink / raw)
To: stable
From: Niklas Cassel <niklas.cassel@axis.com>
If we have an FPU, enroll ourselves in the FPU-full mask.
Matching the MT_SMP and CMP implementations of smp_setup.
Signed-off-by: Niklas Cassel <niklass@axis.com>
Cc: paul.burton@imgtec.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8948/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/kernel/smp-cps.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c
index bed7590..d5589be 100644
--- a/arch/mips/kernel/smp-cps.c
+++ b/arch/mips/kernel/smp-cps.c
@@ -88,6 +88,12 @@ static void __init cps_smp_setup(void)
/* Make core 0 coherent with everything */
write_gcr_cl_coherence(0xff);
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+ /* If we have an FPU, enroll ourselves in the FPU-full mask */
+ if (cpu_has_fpu)
+ cpu_set(0, mt_fpu_cpumask);
+#endif /* CONFIG_MIPS_MT_FPAFF */
}
static void __init cps_prepare_cpus(unsigned int max_cpus)
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 23/31] MIPS: ralink: Fix bad config symbol in PCI makefile.
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (2 preceding siblings ...)
2015-01-15 15:41 ` [PATCH 26/31] MIPS: smp-cps: cpu_set FPU mask if FPU present Ralf Baechle
@ 2015-02-23 5:17 ` Ralf Baechle
2015-02-23 5:17 ` [PATCH 24/31] MIPS: ralink: add missing symbol for RALINK_ILL_ACC Ralf Baechle
` (26 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-02-23 5:17 UTC (permalink / raw)
To: stable
From: John Crispin <blogic@openwrt.org>
A wrong symbol is referenced by commit 187c26ddf0b2 ("MIPS: ralink: add rt2880
pci driver"). Fix this by changing it to the correct symbol.
Signed-off-by: John Crispin <blogic@openwrt.org>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9298/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/pci/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 300591c..2eda01e 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -43,7 +43,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
-obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o
+obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o
obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 24/31] MIPS: ralink: add missing symbol for RALINK_ILL_ACC
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (3 preceding siblings ...)
2015-02-23 5:17 ` [PATCH 23/31] MIPS: ralink: Fix bad config symbol in PCI makefile Ralf Baechle
@ 2015-02-23 5:17 ` Ralf Baechle
2015-02-25 13:08 ` [PATCH 25/31] MIPS: lose_fpu(): Disable FPU when MSA enabled Ralf Baechle
` (25 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-02-23 5:17 UTC (permalink / raw)
To: stable
From: John Crispin <blogic@openwrt.org>
A driver was added in commit 5433acd81e87 ("MIPS: ralink: add illegal access
driver") without the Kconfig section being added. Fix this by adding the symbol
to the Kconfig file.
Signed-off-by: John Crispin <blogic@openwrt.org>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9299/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/ralink/Kconfig | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index b1c52ca..e9bc8c9 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -7,6 +7,11 @@ config CLKEVT_RT3352
select CLKSRC_OF
select CLKSRC_MMIO
+config RALINK_ILL_ACC
+ bool
+ depends on SOC_RT305X
+ default y
+
choice
prompt "Ralink SoC selection"
default SOC_RT305X
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 25/31] MIPS: lose_fpu(): Disable FPU when MSA enabled
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (4 preceding siblings ...)
2015-02-23 5:17 ` [PATCH 24/31] MIPS: ralink: add missing symbol for RALINK_ILL_ACC Ralf Baechle
@ 2015-02-25 13:08 ` Ralf Baechle
2015-02-26 11:11 ` [PATCH 30/31] MIPS: asm: elf: Set O32 default FPU flags Ralf Baechle
` (24 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-02-25 13:08 UTC (permalink / raw)
To: stable
From: James Hogan <james.hogan@imgtec.com>
The lose_fpu() function only disables the FPU in CP0_Status.CU1 if the
FPU is in use and MSA isn't enabled.
This isn't necessarily a problem because KSTK_STATUS(current), the
version of CP0_Status stored on the kernel stack on entry from user
mode, does always get updated and gets restored when returning to user
mode, but I don't think it was intended, and it is inconsistent with the
case of only the FPU being in use. Sometimes leaving the FPU enabled may
also mask kernel bugs where FPU operations are executed when the FPU
might not be enabled.
So lets disable the FPU in the MSA case too.
Fixes: 33c771ba5c5d ("MIPS: save/disable MSA in lose_fpu")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9323/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/include/asm/fpu.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h
index dd083e9..9f26b07 100644
--- a/arch/mips/include/asm/fpu.h
+++ b/arch/mips/include/asm/fpu.h
@@ -170,6 +170,7 @@ static inline void lose_fpu(int save)
}
disable_msa();
clear_thread_flag(TIF_USEDMSA);
+ __disable_fpu();
} else if (is_fpu_owner()) {
if (save)
_save_fp(current);
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 30/31] MIPS: asm: elf: Set O32 default FPU flags
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (5 preceding siblings ...)
2015-02-25 13:08 ` [PATCH 25/31] MIPS: lose_fpu(): Disable FPU when MSA enabled Ralf Baechle
@ 2015-02-26 11:11 ` Ralf Baechle
2015-02-26 13:16 ` [PATCH 05/31] Revert "MIPS: Remove race window in page fault handling" Ralf Baechle
` (23 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-02-26 11:11 UTC (permalink / raw)
To: stable
From: Markos Chandras <markos.chandras@imgtec.com>
Set good default FPU flags (FR0) for O32 binaries similar to what the
kernel does for the N64/N32 ones. This also fixes a regression
introduced in commit 46490b572544 ("MIPS: kernel: elf: Improve the
overall ABI and FPU mode checks") when MIPS_O32_FP64_SUPPORT is
disabled. In that case, the mips_set_personality_fp() did not set the
FPU mode at all because it assumed that the FPU mode was already set
properly. That led to O32 userland problems.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Reported-by: Mans Rullgard <mans@mansr.com>
Fixes: 46490b572544 ("MIPS: kernel: elf: Improve the overall ABI and FPU mode checks")
Tested-by: Mans Rullgard <mans@mansr.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/9344/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/include/asm/elf.h | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index 535f196..694925a 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -294,6 +294,9 @@ do { \
if (personality(current->personality) != PER_LINUX) \
set_personality(PER_LINUX); \
\
+ clear_thread_flag(TIF_HYBRID_FPREGS); \
+ set_thread_flag(TIF_32BIT_FPREGS); \
+ \
mips_set_personality_fp(state); \
\
current->thread.abi = &mips_abi; \
@@ -319,6 +322,8 @@ do { \
do { \
set_thread_flag(TIF_32BIT_REGS); \
set_thread_flag(TIF_32BIT_ADDR); \
+ clear_thread_flag(TIF_HYBRID_FPREGS); \
+ set_thread_flag(TIF_32BIT_FPREGS); \
\
mips_set_personality_fp(state); \
\
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 05/31] Revert "MIPS: Remove race window in page fault handling"
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (6 preceding siblings ...)
2015-02-26 11:11 ` [PATCH 30/31] MIPS: asm: elf: Set O32 default FPU flags Ralf Baechle
@ 2015-02-26 13:16 ` Ralf Baechle
2015-02-26 13:16 ` [PATCH 06/31] MIPS: Fix race condition in lazy cache flushing Ralf Baechle
` (22 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-02-26 13:16 UTC (permalink / raw)
To: stable
From: Lars Persson <lars.persson@axis.com>
Revert commit 2a4a8b1e5d9d ("MIPS: Remove race window in page fault
handling") because it increased the number of flushed dcache pages and
became a performance problem for some workloads.
Signed-off-by: Lars Persson <larper@axis.com>
Cc: linux-mips@linux-mips.org
Cc: paul.burton@imgtec.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9345/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/include/asm/pgtable.h | 9 +++++----
arch/mips/mm/cache.c | 27 ++++++++-------------------
2 files changed, 13 insertions(+), 23 deletions(-)
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index bffd46c..819af9d 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -127,10 +127,6 @@ do { \
} \
} while(0)
-
-extern void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
- pte_t pteval);
-
#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
#define pte_none(pte) (!(((pte).pte_high) & ~_PAGE_GLOBAL))
@@ -152,6 +148,7 @@ static inline void set_pte(pte_t *ptep, pte_t pte)
buddy->pte_high |= _PAGE_GLOBAL;
}
}
+#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
@@ -190,6 +187,7 @@ static inline void set_pte(pte_t *ptep, pte_t pteval)
}
#endif
}
+#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
@@ -399,12 +397,15 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
extern void __update_tlb(struct vm_area_struct *vma, unsigned long address,
pte_t pte);
+extern void __update_cache(struct vm_area_struct *vma, unsigned long address,
+ pte_t pte);
static inline void update_mmu_cache(struct vm_area_struct *vma,
unsigned long address, pte_t *ptep)
{
pte_t pte = *ptep;
__update_tlb(vma, address, pte);
+ __update_cache(vma, address, pte);
}
static inline void update_mmu_cache_pmd(struct vm_area_struct *vma,
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 7e3ea77..f7b91d3 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -119,36 +119,25 @@ void __flush_anon_page(struct page *page, unsigned long vmaddr)
EXPORT_SYMBOL(__flush_anon_page);
-static void mips_flush_dcache_from_pte(pte_t pteval, unsigned long address)
+void __update_cache(struct vm_area_struct *vma, unsigned long address,
+ pte_t pte)
{
struct page *page;
- unsigned long pfn = pte_pfn(pteval);
+ unsigned long pfn, addr;
+ int exec = (vma->vm_flags & VM_EXEC) && !cpu_has_ic_fills_f_dc;
+ pfn = pte_pfn(pte);
if (unlikely(!pfn_valid(pfn)))
return;
-
page = pfn_to_page(pfn);
if (page_mapping(page) && Page_dcache_dirty(page)) {
- unsigned long page_addr = (unsigned long) page_address(page);
-
- if (!cpu_has_ic_fills_f_dc ||
- pages_do_alias(page_addr, address & PAGE_MASK))
- flush_data_cache_page(page_addr);
+ addr = (unsigned long) page_address(page);
+ if (exec || pages_do_alias(addr, address & PAGE_MASK))
+ flush_data_cache_page(addr);
ClearPageDcacheDirty(page);
}
}
-void set_pte_at(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep, pte_t pteval)
-{
- if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc) {
- if (pte_present(pteval))
- mips_flush_dcache_from_pte(pteval, addr);
- }
-
- set_pte(ptep, pteval);
-}
-
unsigned long _page_cachable_default;
EXPORT_SYMBOL(_page_cachable_default);
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 06/31] MIPS: Fix race condition in lazy cache flushing.
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (7 preceding siblings ...)
2015-02-26 13:16 ` [PATCH 05/31] Revert "MIPS: Remove race window in page fault handling" Ralf Baechle
@ 2015-02-26 13:16 ` Ralf Baechle
2015-02-27 7:51 ` [PATCH 21/31] MIPS: Malta: Detect and fix bad memsize values Ralf Baechle
` (21 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-02-26 13:16 UTC (permalink / raw)
To: stable
From: Lars Persson <lars.persson@axis.com>
The lazy cache flushing implemented in the MIPS kernel suffers from a
race condition that is exposed by do_set_pte() in mm/memory.c.
A pre-condition is a file-system that writes to the page from the CPU
in its readpage method and then calls flush_dcache_page(). One example
is ubifs. Another pre-condition is that the dcache flush is postponed
in __flush_dcache_page().
Upon a page fault for an executable mapping not existing in the
page-cache, the following will happen:
1. Write to the page
2. flush_dcache_page
3. flush_icache_page
4. set_pte_at
5. update_mmu_cache (commits the flush of a dcache-dirty page)
Between steps 4 and 5 another thread can hit the same page and it will
encounter a valid pte. Because the data still is in the L1 dcache the CPU
will fetch stale data from L2 into the icache and execute garbage.
This fix moves the commit of the cache flush to step 3 to close the
race window. It also reduces the amount of flushes on non-executable
mappings because we never enter __flush_dcache_page() for non-aliasing
CPUs.
Regressions can occur in drivers that mistakenly relies on the
flush_dcache_page() in get_user_pages() for DMA operations.
[ralf@linux-mips.org: Folded in patch 9346 to fix highmem issue.]
Signed-off-by: Lars Persson <larper@axis.com>
Cc: linux-mips@linux-mips.org
Cc: paul.burton@imgtec.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9346/
Patchwork: https://patchwork.linux-mips.org/patch/9738/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/include/asm/cacheflush.h | 38 +++++++++++++++++++++++---------------
arch/mips/mm/cache.c | 12 ++++++++++++
2 files changed, 35 insertions(+), 15 deletions(-)
diff --git a/arch/mips/include/asm/cacheflush.h b/arch/mips/include/asm/cacheflush.h
index e08381a..723229f 100644
--- a/arch/mips/include/asm/cacheflush.h
+++ b/arch/mips/include/asm/cacheflush.h
@@ -29,6 +29,20 @@
* - flush_icache_all() flush the entire instruction cache
* - flush_data_cache_page() flushes a page from the data cache
*/
+
+ /*
+ * This flag is used to indicate that the page pointed to by a pte
+ * is dirty and requires cleaning before returning it to the user.
+ */
+#define PG_dcache_dirty PG_arch_1
+
+#define Page_dcache_dirty(page) \
+ test_bit(PG_dcache_dirty, &(page)->flags)
+#define SetPageDcacheDirty(page) \
+ set_bit(PG_dcache_dirty, &(page)->flags)
+#define ClearPageDcacheDirty(page) \
+ clear_bit(PG_dcache_dirty, &(page)->flags)
+
extern void (*flush_cache_all)(void);
extern void (*__flush_cache_all)(void);
extern void (*flush_cache_mm)(struct mm_struct *mm);
@@ -37,13 +51,15 @@ extern void (*flush_cache_range)(struct vm_area_struct *vma,
unsigned long start, unsigned long end);
extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
extern void __flush_dcache_page(struct page *page);
+extern void __flush_icache_page(struct vm_area_struct *vma, struct page *page);
#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
static inline void flush_dcache_page(struct page *page)
{
- if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc)
+ if (cpu_has_dc_aliases)
__flush_dcache_page(page);
-
+ else if (!cpu_has_ic_fills_f_dc)
+ SetPageDcacheDirty(page);
}
#define flush_dcache_mmap_lock(mapping) do { } while (0)
@@ -61,6 +77,11 @@ static inline void flush_anon_page(struct vm_area_struct *vma,
static inline void flush_icache_page(struct vm_area_struct *vma,
struct page *page)
{
+ if (!cpu_has_ic_fills_f_dc && (vma->vm_flags & VM_EXEC) &&
+ Page_dcache_dirty(page)) {
+ __flush_icache_page(vma, page);
+ ClearPageDcacheDirty(page);
+ }
}
extern void (*flush_icache_range)(unsigned long start, unsigned long end);
@@ -95,19 +116,6 @@ extern void (*flush_icache_all)(void);
extern void (*local_flush_data_cache_page)(void * addr);
extern void (*flush_data_cache_page)(unsigned long addr);
-/*
- * This flag is used to indicate that the page pointed to by a pte
- * is dirty and requires cleaning before returning it to the user.
- */
-#define PG_dcache_dirty PG_arch_1
-
-#define Page_dcache_dirty(page) \
- test_bit(PG_dcache_dirty, &(page)->flags)
-#define SetPageDcacheDirty(page) \
- set_bit(PG_dcache_dirty, &(page)->flags)
-#define ClearPageDcacheDirty(page) \
- clear_bit(PG_dcache_dirty, &(page)->flags)
-
/* Run kernel code uncached, useful for cache probing functions. */
unsigned long run_uncached(void *func);
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index f7b91d3..77d96db 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -119,6 +119,18 @@ void __flush_anon_page(struct page *page, unsigned long vmaddr)
EXPORT_SYMBOL(__flush_anon_page);
+void __flush_icache_page(struct vm_area_struct *vma, struct page *page)
+{
+ unsigned long addr;
+
+ if (PageHighMem(page))
+ return;
+
+ addr = (unsigned long) page_address(page);
+ flush_data_cache_page(addr);
+}
+EXPORT_SYMBOL_GPL(__flush_icache_page);
+
void __update_cache(struct vm_area_struct *vma, unsigned long address,
pte_t pte)
{
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 21/31] MIPS: Malta: Detect and fix bad memsize values
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (8 preceding siblings ...)
2015-02-26 13:16 ` [PATCH 06/31] MIPS: Fix race condition in lazy cache flushing Ralf Baechle
@ 2015-02-27 7:51 ` Ralf Baechle
2015-03-03 18:48 ` [PATCH 15/31] MIPS: r4kcache: Use correct base register for MIPS R6 cache flushes Ralf Baechle
` (20 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-02-27 7:51 UTC (permalink / raw)
To: stable
From: Markos Chandras <markos.chandras@imgtec.com>
memsize denotes the amount of RAM we can access from kseg{0,1} and
that should be up to 256M. In case the bootloader reports a value
higher than that (perhaps reporting all the available RAM) it's best
if we fix it ourselves and just warn the user about that. This is
usually a problem with the bootloader and/or its environment.
[ralf@linux-mips.org: Remove useless parens as suggested bei Sergei.
Reformat long pr_warn statement to fit into 80 column limit.]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: <stable@vger.kernel.org> # v3.15+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9362/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/mti-malta/malta-memory.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c
index 8fddd2cd..efe366d 100644
--- a/arch/mips/mti-malta/malta-memory.c
+++ b/arch/mips/mti-malta/malta-memory.c
@@ -53,6 +53,12 @@ fw_memblock_t * __init fw_getmdesc(int eva)
pr_warn("memsize not set in YAMON, set to default (32Mb)\n");
physical_memsize = 0x02000000;
} else {
+ if (memsize > (256 << 20)) { /* memsize should be capped to 256M */
+ pr_warn("Unsupported memsize value (0x%lx) detected! "
+ "Using 0x10000000 (256M) instead\n",
+ memsize);
+ memsize = 256 << 20;
+ }
/* If ememsize is set, then set physical_memsize to that */
physical_memsize = ememsize ? : memsize;
}
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 15/31] MIPS: r4kcache: Use correct base register for MIPS R6 cache flushes
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (9 preceding siblings ...)
2015-02-27 7:51 ` [PATCH 21/31] MIPS: Malta: Detect and fix bad memsize values Ralf Baechle
@ 2015-03-03 18:48 ` Ralf Baechle
2015-03-03 18:48 ` [PATCH 16/31] MIPS: asm: spinlock: Fix addiu instruction for R10000_LLSC_WAR case Ralf Baechle
` (19 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-03-03 18:48 UTC (permalink / raw)
To: stable
From: Markos Chandras <markos.chandras@imgtec.com>
Commit 934c79231c1b("MIPS: asm: r4kcache: Add MIPS R6 cache unroll
functions") added support for MIPS R6 cache flushes but it used the
wrong base address register to perform the flushes so the same lines
were flushed over and over. Moreover, replace the "addiu" instructions
with LONG_ADDIU so the correct base address is calculated for 64-bit
cores.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Fixes: 934c79231c1b("MIPS: asm: r4kcache: Add MIPS R6 cache unroll functions")
Cc: linux-mips@linux-mips.org
Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/9384/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/include/asm/r4kcache.h | 89 ++++++++++++++++++++--------------------
1 file changed, 45 insertions(+), 44 deletions(-)
diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h
index 1b22d2da..38902bf 100644
--- a/arch/mips/include/asm/r4kcache.h
+++ b/arch/mips/include/asm/r4kcache.h
@@ -12,6 +12,8 @@
#ifndef _ASM_R4KCACHE_H
#define _ASM_R4KCACHE_H
+#include <linux/stringify.h>
+
#include <asm/asm.h>
#include <asm/cacheops.h>
#include <asm/compiler.h>
@@ -344,7 +346,7 @@ static inline void invalidate_tcache_page(unsigned long addr)
" cache %1, 0x0a0(%0); cache %1, 0x0b0(%0)\n" \
" cache %1, 0x0c0(%0); cache %1, 0x0d0(%0)\n" \
" cache %1, 0x0e0(%0); cache %1, 0x0f0(%0)\n" \
- " addiu $1, $0, 0x100 \n" \
+ " "__stringify(LONG_ADDIU)" $1, %0, 0x100 \n" \
" cache %1, 0x000($1); cache %1, 0x010($1)\n" \
" cache %1, 0x020($1); cache %1, 0x030($1)\n" \
" cache %1, 0x040($1); cache %1, 0x050($1)\n" \
@@ -368,17 +370,17 @@ static inline void invalidate_tcache_page(unsigned long addr)
" cache %1, 0x040(%0); cache %1, 0x060(%0)\n" \
" cache %1, 0x080(%0); cache %1, 0x0a0(%0)\n" \
" cache %1, 0x0c0(%0); cache %1, 0x0e0(%0)\n" \
- " addiu $1, %0, 0x100\n" \
+ " "__stringify(LONG_ADDIU)" $1, %0, 0x100 \n" \
" cache %1, 0x000($1); cache %1, 0x020($1)\n" \
" cache %1, 0x040($1); cache %1, 0x060($1)\n" \
" cache %1, 0x080($1); cache %1, 0x0a0($1)\n" \
" cache %1, 0x0c0($1); cache %1, 0x0e0($1)\n" \
- " addiu $1, $1, 0x100\n" \
+ " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \
" cache %1, 0x000($1); cache %1, 0x020($1)\n" \
" cache %1, 0x040($1); cache %1, 0x060($1)\n" \
" cache %1, 0x080($1); cache %1, 0x0a0($1)\n" \
" cache %1, 0x0c0($1); cache %1, 0x0e0($1)\n" \
- " addiu $1, $1, 0x100\n" \
+ " "__stringify(LONG_ADDIU)" $1, $1, 0x100\n" \
" cache %1, 0x000($1); cache %1, 0x020($1)\n" \
" cache %1, 0x040($1); cache %1, 0x060($1)\n" \
" cache %1, 0x080($1); cache %1, 0x0a0($1)\n" \
@@ -396,25 +398,25 @@ static inline void invalidate_tcache_page(unsigned long addr)
" .set noat\n" \
" cache %1, 0x000(%0); cache %1, 0x040(%0)\n" \
" cache %1, 0x080(%0); cache %1, 0x0c0(%0)\n" \
- " addiu $1, %0, 0x100\n" \
+ " "__stringify(LONG_ADDIU)" $1, %0, 0x100 \n" \
" cache %1, 0x000($1); cache %1, 0x040($1)\n" \
" cache %1, 0x080($1); cache %1, 0x0c0($1)\n" \
- " addiu $1, %0, 0x100\n" \
+ " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \
" cache %1, 0x000($1); cache %1, 0x040($1)\n" \
" cache %1, 0x080($1); cache %1, 0x0c0($1)\n" \
- " addiu $1, %0, 0x100\n" \
+ " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \
" cache %1, 0x000($1); cache %1, 0x040($1)\n" \
" cache %1, 0x080($1); cache %1, 0x0c0($1)\n" \
- " addiu $1, %0, 0x100\n" \
+ " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \
" cache %1, 0x000($1); cache %1, 0x040($1)\n" \
" cache %1, 0x080($1); cache %1, 0x0c0($1)\n" \
- " addiu $1, %0, 0x100\n" \
+ " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \
" cache %1, 0x000($1); cache %1, 0x040($1)\n" \
" cache %1, 0x080($1); cache %1, 0x0c0($1)\n" \
- " addiu $1, %0, 0x100\n" \
+ " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \
" cache %1, 0x000($1); cache %1, 0x040($1)\n" \
" cache %1, 0x080($1); cache %1, 0x0c0($1)\n" \
- " addiu $1, %0, 0x100\n" \
+ " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \
" cache %1, 0x000($1); cache %1, 0x040($1)\n" \
" cache %1, 0x080($1); cache %1, 0x0c0($1)\n" \
" .set pop\n" \
@@ -429,39 +431,38 @@ static inline void invalidate_tcache_page(unsigned long addr)
" .set mips64r6\n" \
" .set noat\n" \
" cache %1, 0x000(%0); cache %1, 0x080(%0)\n" \
- " addiu $1, %0, 0x100\n" \
- " cache %1, 0x000(%0); cache %1, 0x080(%0)\n" \
- " addiu $1, %0, 0x100\n" \
- " cache %1, 0x000(%0); cache %1, 0x080(%0)\n" \
- " addiu $1, %0, 0x100\n" \
- " cache %1, 0x000(%0); cache %1, 0x080(%0)\n" \
- " addiu $1, %0, 0x100\n" \
- " cache %1, 0x000(%0); cache %1, 0x080(%0)\n" \
- " addiu $1, %0, 0x100\n" \
- " cache %1, 0x000(%0); cache %1, 0x080(%0)\n" \
- " addiu $1, %0, 0x100\n" \
- " cache %1, 0x000(%0); cache %1, 0x080(%0)\n" \
- " addiu $1, %0, 0x100\n" \
- " cache %1, 0x000(%0); cache %1, 0x080(%0)\n" \
- " addiu $1, %0, 0x100\n" \
- " cache %1, 0x000(%0); cache %1, 0x080(%0)\n" \
- " addiu $1, %0, 0x100\n" \
- " cache %1, 0x000(%0); cache %1, 0x080(%0)\n" \
- " addiu $1, %0, 0x100\n" \
- " cache %1, 0x000(%0); cache %1, 0x080(%0)\n" \
- " addiu $1, %0, 0x100\n" \
- " cache %1, 0x000(%0); cache %1, 0x080(%0)\n" \
- " addiu $1, %0, 0x100\n" \
- " cache %1, 0x000(%0); cache %1, 0x080(%0)\n" \
- " addiu $1, %0, 0x100\n" \
- " cache %1, 0x000(%0); cache %1, 0x080(%0)\n" \
- " addiu $1, %0, 0x100\n" \
- " cache %1, 0x000(%0); cache %1, 0x080(%0)\n" \
- " addiu $1, %0, 0x100\n" \
- " cache %1, 0x000(%0); cache %1, 0x080(%0)\n" \
- " addiu $1, %0, 0x100\n" \
- " cache %1, 0x000(%0); cache %1, 0x080(%0)\n" \
- " addiu $1, %0, 0x100\n" \
+ " "__stringify(LONG_ADDIU)" $1, %0, 0x100 \n" \
+ " cache %1, 0x000($1); cache %1, 0x080($1)\n" \
+ " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \
+ " cache %1, 0x000($1); cache %1, 0x080($1)\n" \
+ " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \
+ " cache %1, 0x000($1); cache %1, 0x080($1)\n" \
+ " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \
+ " cache %1, 0x000($1); cache %1, 0x080($1)\n" \
+ " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \
+ " cache %1, 0x000($1); cache %1, 0x080($1)\n" \
+ " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \
+ " cache %1, 0x000($1); cache %1, 0x080($1)\n" \
+ " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \
+ " cache %1, 0x000($1); cache %1, 0x080($1)\n" \
+ " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \
+ " cache %1, 0x000($1); cache %1, 0x080($1)\n" \
+ " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \
+ " cache %1, 0x000($1); cache %1, 0x080($1)\n" \
+ " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \
+ " cache %1, 0x000($1); cache %1, 0x080($1)\n" \
+ " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \
+ " cache %1, 0x000($1); cache %1, 0x080($1)\n" \
+ " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \
+ " cache %1, 0x000($1); cache %1, 0x080($1)\n" \
+ " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \
+ " cache %1, 0x000($1); cache %1, 0x080($1)\n" \
+ " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \
+ " cache %1, 0x000($1); cache %1, 0x080($1)\n" \
+ " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \
+ " cache %1, 0x000($1); cache %1, 0x080($1)\n" \
+ " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \
+ " cache %1, 0x000($1); cache %1, 0x080($1)\n" \
" .set pop\n" \
: \
: "r" (base), \
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 16/31] MIPS: asm: spinlock: Fix addiu instruction for R10000_LLSC_WAR case
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (10 preceding siblings ...)
2015-03-03 18:48 ` [PATCH 15/31] MIPS: r4kcache: Use correct base register for MIPS R6 cache flushes Ralf Baechle
@ 2015-03-03 18:48 ` Ralf Baechle
2015-03-03 18:48 ` [PATCH 17/31] MIPS: kernel: entry.S: Set correct ISA level for mips_ihb Ralf Baechle
` (18 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-03-03 18:48 UTC (permalink / raw)
To: stable
From: Markos Chandras <markos.chandras@imgtec.com>
Commit 5753762cbd1c("MIPS: asm: spinlock: Replace "sub" instruction
with "addiu") replaced the "sub" instruction with addiu but it did
not update the immediate value in the R10000_LLSC_WAR case.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Fixes: 5753762cbd1c("MIPS: asm: spinlock: Replace "sub" instruction with "addiu"")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9385/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/include/asm/spinlock.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h
index b454869..1fca2e0 100644
--- a/arch/mips/include/asm/spinlock.h
+++ b/arch/mips/include/asm/spinlock.h
@@ -263,7 +263,7 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
if (R10000_LLSC_WAR) {
__asm__ __volatile__(
"1: ll %1, %2 # arch_read_unlock \n"
- " addiu %1, 1 \n"
+ " addiu %1, -1 \n"
" sc %1, %0 \n"
" beqzl %1, 1b \n"
: "=" GCC_OFF_SMALL_ASM() (rw->lock), "=&r" (tmp)
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 17/31] MIPS: kernel: entry.S: Set correct ISA level for mips_ihb
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (11 preceding siblings ...)
2015-03-03 18:48 ` [PATCH 16/31] MIPS: asm: spinlock: Fix addiu instruction for R10000_LLSC_WAR case Ralf Baechle
@ 2015-03-03 18:48 ` Ralf Baechle
2015-03-04 21:08 ` [PATCH 03/31] MIPS: OCTEON: dma-octeon: fix OHCI USB config check Ralf Baechle
` (17 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-03-03 18:48 UTC (permalink / raw)
To: stable
From: Markos Chandras <markos.chandras@imgtec.com>
Commit 6ebb496ffc7e("MIPS: kernel: entry.S: Add MIPS R6 related
definitions") added the MIPSR6 definition but it did not update the
ISA level of the actual assembly code so a pre-MIPSR6 jr.hb instruction
was generated instead. Fix this by using the MISP_ISA_LEVEL_RAW macro.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Fixes: 6ebb496ffc7e("MIPS: kernel: entry.S: Add MIPS R6 related definitions")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9386/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/kernel/entry.S | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S
index af41ba6..7791840 100644
--- a/arch/mips/kernel/entry.S
+++ b/arch/mips/kernel/entry.S
@@ -10,6 +10,7 @@
#include <asm/asm.h>
#include <asm/asmmacro.h>
+#include <asm/compiler.h>
#include <asm/regdef.h>
#include <asm/mipsregs.h>
#include <asm/stackframe.h>
@@ -185,7 +186,7 @@ syscall_exit_work:
* For C code use the inline version named instruction_hazard().
*/
LEAF(mips_ihb)
- .set mips32r2
+ .set MIPS_ISA_LEVEL_RAW
jr.hb ra
nop
END(mips_ihb)
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 03/31] MIPS: OCTEON: dma-octeon: fix OHCI USB config check
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (12 preceding siblings ...)
2015-03-03 18:48 ` [PATCH 17/31] MIPS: kernel: entry.S: Set correct ISA level for mips_ihb Ralf Baechle
@ 2015-03-04 21:08 ` Ralf Baechle
2015-03-06 11:02 ` [PATCH 04/31] MIPS: OCTEON: Use correct CSR to soft reset Ralf Baechle
` (16 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-03-04 21:08 UTC (permalink / raw)
To: stable
From: Aaro Koskinen <aaro.koskinen@iki.fi>
CONFIG_USB_OCTEON_OHCI is deprecated and no longer needed to use OHCI
on OCTEON II. Instead, CONFIG_USB_OHCI_HCD_PLATFORM should be used.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Aleksey Makarov <aleksey.makarov@auriga.com>
Cc: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9421/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/cavium-octeon/dma-octeon.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
index 7d89878..d8960d4 100644
--- a/arch/mips/cavium-octeon/dma-octeon.c
+++ b/arch/mips/cavium-octeon/dma-octeon.c
@@ -306,7 +306,7 @@ void __init plat_swiotlb_setup(void)
swiotlbsize = 64 * (1<<20);
}
#endif
-#ifdef CONFIG_USB_OCTEON_OHCI
+#ifdef CONFIG_USB_OHCI_HCD_PLATFORM
/* OCTEON II ohci is only 32-bit. */
if (OCTEON_IS_OCTEON2() && max_addr >= 0x100000000ul)
swiotlbsize = 64 * (1<<20);
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 04/31] MIPS: OCTEON: Use correct CSR to soft reset
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (13 preceding siblings ...)
2015-03-04 21:08 ` [PATCH 03/31] MIPS: OCTEON: dma-octeon: fix OHCI USB config check Ralf Baechle
@ 2015-03-06 11:02 ` Ralf Baechle
2015-03-09 14:54 ` [PATCH 10/31] MIPS: asm: asm-eva: Introduce kernel load/store variants Ralf Baechle
` (15 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-03-06 11:02 UTC (permalink / raw)
To: stable
From: Chandrakala Chavva <cchavva@caviumnetworks.com>
Also delete unused cvmx_reset_octeon()
This fixes reboot for Octeon III boards
Signed-off-by: Chandrakala Chavva <cchavva@caviumnetworks.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/9471/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/cavium-octeon/setup.c | 5 ++++-
arch/mips/include/asm/octeon/cvmx.h | 8 --------
2 files changed, 4 insertions(+), 9 deletions(-)
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index a42110e..a7f4082 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -413,7 +413,10 @@ static void octeon_restart(char *command)
mb();
while (1)
- cvmx_write_csr(CVMX_CIU_SOFT_RST, 1);
+ if (OCTEON_IS_OCTEON3())
+ cvmx_write_csr(CVMX_RST_SOFT_RST, 1);
+ else
+ cvmx_write_csr(CVMX_CIU_SOFT_RST, 1);
}
diff --git a/arch/mips/include/asm/octeon/cvmx.h b/arch/mips/include/asm/octeon/cvmx.h
index 33db1c8..774bb45 100644
--- a/arch/mips/include/asm/octeon/cvmx.h
+++ b/arch/mips/include/asm/octeon/cvmx.h
@@ -436,14 +436,6 @@ static inline uint64_t cvmx_get_cycle_global(void)
/***************************************************************************/
-static inline void cvmx_reset_octeon(void)
-{
- union cvmx_ciu_soft_rst ciu_soft_rst;
- ciu_soft_rst.u64 = 0;
- ciu_soft_rst.s.soft_rst = 1;
- cvmx_write_csr(CVMX_CIU_SOFT_RST, ciu_soft_rst.u64);
-}
-
/* Return the number of cores available in the chip */
static inline uint32_t cvmx_octeon_num_cores(void)
{
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 10/31] MIPS: asm: asm-eva: Introduce kernel load/store variants
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (14 preceding siblings ...)
2015-03-06 11:02 ` [PATCH 04/31] MIPS: OCTEON: Use correct CSR to soft reset Ralf Baechle
@ 2015-03-09 14:54 ` Ralf Baechle
2015-03-09 14:54 ` [PATCH 11/31] MIPS: unaligned: Prevent EVA instructions on kernel unaligned accesses Ralf Baechle
` (14 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-03-09 14:54 UTC (permalink / raw)
To: stable
From: Markos Chandras <markos.chandras@imgtec.com>
Introduce new macros for kernel load/store variants which will be
used to perform regular kernel space load/store operations in EVA
mode.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: <stable@vger.kernel.org> # v3.15+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9500/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/include/asm/asm-eva.h | 137 +++++++++++++++++++++++++++-------------
1 file changed, 93 insertions(+), 44 deletions(-)
diff --git a/arch/mips/include/asm/asm-eva.h b/arch/mips/include/asm/asm-eva.h
index e41c56e..1e38f0e 100644
--- a/arch/mips/include/asm/asm-eva.h
+++ b/arch/mips/include/asm/asm-eva.h
@@ -11,6 +11,36 @@
#define __ASM_ASM_EVA_H
#ifndef __ASSEMBLY__
+
+/* Kernel variants */
+
+#define kernel_cache(op, base) "cache " op ", " base "\n"
+#define kernel_ll(reg, addr) "ll " reg ", " addr "\n"
+#define kernel_sc(reg, addr) "sc " reg ", " addr "\n"
+#define kernel_lw(reg, addr) "lw " reg ", " addr "\n"
+#define kernel_lwl(reg, addr) "lwl " reg ", " addr "\n"
+#define kernel_lwr(reg, addr) "lwr " reg ", " addr "\n"
+#define kernel_lh(reg, addr) "lh " reg ", " addr "\n"
+#define kernel_lb(reg, addr) "lb " reg ", " addr "\n"
+#define kernel_lbu(reg, addr) "lbu " reg ", " addr "\n"
+#define kernel_sw(reg, addr) "sw " reg ", " addr "\n"
+#define kernel_swl(reg, addr) "swl " reg ", " addr "\n"
+#define kernel_swr(reg, addr) "swr " reg ", " addr "\n"
+#define kernel_sh(reg, addr) "sh " reg ", " addr "\n"
+#define kernel_sb(reg, addr) "sb " reg ", " addr "\n"
+
+#ifdef CONFIG_32BIT
+/*
+ * No 'sd' or 'ld' instructions in 32-bit but the code will
+ * do the correct thing
+ */
+#define kernel_sd(reg, addr) user_sw(reg, addr)
+#define kernel_ld(reg, addr) user_lw(reg, addr)
+#else
+#define kernel_sd(reg, addr) "sd " reg", " addr "\n"
+#define kernel_ld(reg, addr) "ld " reg", " addr "\n"
+#endif /* CONFIG_32BIT */
+
#ifdef CONFIG_EVA
#define __BUILD_EVA_INSN(insn, reg, addr) \
@@ -41,37 +71,60 @@
#else
-#define user_cache(op, base) "cache " op ", " base "\n"
-#define user_ll(reg, addr) "ll " reg ", " addr "\n"
-#define user_sc(reg, addr) "sc " reg ", " addr "\n"
-#define user_lw(reg, addr) "lw " reg ", " addr "\n"
-#define user_lwl(reg, addr) "lwl " reg ", " addr "\n"
-#define user_lwr(reg, addr) "lwr " reg ", " addr "\n"
-#define user_lh(reg, addr) "lh " reg ", " addr "\n"
-#define user_lb(reg, addr) "lb " reg ", " addr "\n"
-#define user_lbu(reg, addr) "lbu " reg ", " addr "\n"
-#define user_sw(reg, addr) "sw " reg ", " addr "\n"
-#define user_swl(reg, addr) "swl " reg ", " addr "\n"
-#define user_swr(reg, addr) "swr " reg ", " addr "\n"
-#define user_sh(reg, addr) "sh " reg ", " addr "\n"
-#define user_sb(reg, addr) "sb " reg ", " addr "\n"
+#define user_cache(op, base) kernel_cache(op, base)
+#define user_ll(reg, addr) kernel_ll(reg, addr)
+#define user_sc(reg, addr) kernel_sc(reg, addr)
+#define user_lw(reg, addr) kernel_lw(reg, addr)
+#define user_lwl(reg, addr) kernel_lwl(reg, addr)
+#define user_lwr(reg, addr) kernel_lwr(reg, addr)
+#define user_lh(reg, addr) kernel_lh(reg, addr)
+#define user_lb(reg, addr) kernel_lb(reg, addr)
+#define user_lbu(reg, addr) kernel_lbu(reg, addr)
+#define user_sw(reg, addr) kernel_sw(reg, addr)
+#define user_swl(reg, addr) kernel_swl(reg, addr)
+#define user_swr(reg, addr) kernel_swr(reg, addr)
+#define user_sh(reg, addr) kernel_sh(reg, addr)
+#define user_sb(reg, addr) kernel_sb(reg, addr)
#ifdef CONFIG_32BIT
-/*
- * No 'sd' or 'ld' instructions in 32-bit but the code will
- * do the correct thing
- */
-#define user_sd(reg, addr) user_sw(reg, addr)
-#define user_ld(reg, addr) user_lw(reg, addr)
+#define user_sd(reg, addr) kernel_sw(reg, addr)
+#define user_ld(reg, addr) kernel_lw(reg, addr)
#else
-#define user_sd(reg, addr) "sd " reg", " addr "\n"
-#define user_ld(reg, addr) "ld " reg", " addr "\n"
+#define user_sd(reg, addr) kernel_sd(reg, addr)
+#define user_ld(reg, addr) kernel_ld(reg, addr)
#endif /* CONFIG_32BIT */
#endif /* CONFIG_EVA */
#else /* __ASSEMBLY__ */
+#define kernel_cache(op, base) cache op, base
+#define kernel_ll(reg, addr) ll reg, addr
+#define kernel_sc(reg, addr) sc reg, addr
+#define kernel_lw(reg, addr) lw reg, addr
+#define kernel_lwl(reg, addr) lwl reg, addr
+#define kernel_lwr(reg, addr) lwr reg, addr
+#define kernel_lh(reg, addr) lh reg, addr
+#define kernel_lb(reg, addr) lb reg, addr
+#define kernel_lbu(reg, addr) lbu reg, addr
+#define kernel_sw(reg, addr) sw reg, addr
+#define kernel_swl(reg, addr) swl reg, addr
+#define kernel_swr(reg, addr) swr reg, addr
+#define kernel_sh(reg, addr) sh reg, addr
+#define kernel_sb(reg, addr) sb reg, addr
+
+#ifdef CONFIG_32BIT
+/*
+ * No 'sd' or 'ld' instructions in 32-bit but the code will
+ * do the correct thing
+ */
+#define kernel_sd(reg, addr) user_sw(reg, addr)
+#define kernel_ld(reg, addr) user_lw(reg, addr)
+#else
+#define kernel_sd(reg, addr) sd reg, addr
+#define kernel_ld(reg, addr) ld reg, addr
+#endif /* CONFIG_32BIT */
+
#ifdef CONFIG_EVA
#define __BUILD_EVA_INSN(insn, reg, addr) \
@@ -101,31 +154,27 @@
#define user_sd(reg, addr) user_sw(reg, addr)
#else
-#define user_cache(op, base) cache op, base
-#define user_ll(reg, addr) ll reg, addr
-#define user_sc(reg, addr) sc reg, addr
-#define user_lw(reg, addr) lw reg, addr
-#define user_lwl(reg, addr) lwl reg, addr
-#define user_lwr(reg, addr) lwr reg, addr
-#define user_lh(reg, addr) lh reg, addr
-#define user_lb(reg, addr) lb reg, addr
-#define user_lbu(reg, addr) lbu reg, addr
-#define user_sw(reg, addr) sw reg, addr
-#define user_swl(reg, addr) swl reg, addr
-#define user_swr(reg, addr) swr reg, addr
-#define user_sh(reg, addr) sh reg, addr
-#define user_sb(reg, addr) sb reg, addr
+#define user_cache(op, base) kernel_cache(op, base)
+#define user_ll(reg, addr) kernel_ll(reg, addr)
+#define user_sc(reg, addr) kernel_sc(reg, addr)
+#define user_lw(reg, addr) kernel_lw(reg, addr)
+#define user_lwl(reg, addr) kernel_lwl(reg, addr)
+#define user_lwr(reg, addr) kernel_lwr(reg, addr)
+#define user_lh(reg, addr) kernel_lh(reg, addr)
+#define user_lb(reg, addr) kernel_lb(reg, addr)
+#define user_lbu(reg, addr) kernel_lbu(reg, addr)
+#define user_sw(reg, addr) kernel_sw(reg, addr)
+#define user_swl(reg, addr) kernel_swl(reg, addr)
+#define user_swr(reg, addr) kernel_swr(reg, addr)
+#define user_sh(reg, addr) kernel_sh(reg, addr)
+#define user_sb(reg, addr) kernel_sb(reg, addr)
#ifdef CONFIG_32BIT
-/*
- * No 'sd' or 'ld' instructions in 32-bit but the code will
- * do the correct thing
- */
-#define user_sd(reg, addr) user_sw(reg, addr)
-#define user_ld(reg, addr) user_lw(reg, addr)
+#define user_sd(reg, addr) kernel_sw(reg, addr)
+#define user_ld(reg, addr) kernel_lw(reg, addr)
#else
-#define user_sd(reg, addr) sd reg, addr
-#define user_ld(reg, addr) ld reg, addr
+#define user_sd(reg, addr) kernel_sd(reg, addr)
+#define user_ld(reg, addr) kernel_sd(reg, addr)
#endif /* CONFIG_32BIT */
#endif /* CONFIG_EVA */
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 11/31] MIPS: unaligned: Prevent EVA instructions on kernel unaligned accesses
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (15 preceding siblings ...)
2015-03-09 14:54 ` [PATCH 10/31] MIPS: asm: asm-eva: Introduce kernel load/store variants Ralf Baechle
@ 2015-03-09 14:54 ` Ralf Baechle
2015-03-09 14:54 ` [PATCH 12/31] MIPS: unaligned: Surround load/store macros in do {} while statements Ralf Baechle
` (13 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-03-09 14:54 UTC (permalink / raw)
To: stable
From: Markos Chandras <markos.chandras@imgtec.com>
Commit c1771216ab48 ("MIPS: kernel: unaligned: Handle unaligned
accesses for EVA") allowed unaligned accesses to be emulated for
EVA. However, when emulating regular load/store unaligned accesses,
we need to use the appropriate "address space" instructions for that.
Previously, an unaligned load/store instruction in kernel space would
have used the corresponding EVA instructions to emulate it which led to
segmentation faults because of the address translation that happens
with EVA instructions. This is now fixed by using the EVA instruction
only when emulating EVA unaligned accesses.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Fixes: c1771216ab48 ("MIPS: kernel: unaligned: Handle unaligned accesses for EVA")
Cc: <stable@vger.kernel.org> # v3.15+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9501/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/kernel/unaligned.c | 172 +++++++++++++++++++++++--------------------
1 file changed, 94 insertions(+), 78 deletions(-)
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index bbb6969..7a5707e 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -109,10 +109,10 @@ static u32 unaligned_action;
extern void show_registers(struct pt_regs *regs);
#ifdef __BIG_ENDIAN
-#define LoadHW(addr, value, res) \
+#define _LoadHW(addr, value, res, type) \
__asm__ __volatile__ (".set\tnoat\n" \
- "1:\t"user_lb("%0", "0(%2)")"\n" \
- "2:\t"user_lbu("$1", "1(%2)")"\n\t" \
+ "1:\t"type##_lb("%0", "0(%2)")"\n" \
+ "2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
@@ -130,10 +130,10 @@ extern void show_registers(struct pt_regs *regs);
: "r" (addr), "i" (-EFAULT));
#ifndef CONFIG_CPU_MIPSR6
-#define LoadW(addr, value, res) \
+#define _LoadW(addr, value, res, type) \
__asm__ __volatile__ ( \
- "1:\t"user_lwl("%0", "(%2)")"\n" \
- "2:\t"user_lwr("%0", "3(%2)")"\n\t" \
+ "1:\t"type##_lwl("%0", "(%2)")"\n" \
+ "2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
"li\t%1, 0\n" \
"3:\n\t" \
".insn\n\t" \
@@ -149,18 +149,18 @@ extern void show_registers(struct pt_regs *regs);
: "r" (addr), "i" (-EFAULT));
#else
/* MIPSR6 has no lwl instruction */
-#define LoadW(addr, value, res) \
+#define _LoadW(addr, value, res, type) \
__asm__ __volatile__ ( \
".set\tpush\n" \
".set\tnoat\n\t" \
- "1:"user_lb("%0", "0(%2)")"\n\t" \
- "2:"user_lbu("$1", "1(%2)")"\n\t" \
+ "1:"type##_lb("%0", "0(%2)")"\n\t" \
+ "2:"type##_lbu("$1", "1(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
- "3:"user_lbu("$1", "2(%2)")"\n\t" \
+ "3:"type##_lbu("$1", "2(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
- "4:"user_lbu("$1", "3(%2)")"\n\t" \
+ "4:"type##_lbu("$1", "3(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
@@ -181,11 +181,11 @@ extern void show_registers(struct pt_regs *regs);
: "r" (addr), "i" (-EFAULT));
#endif /* CONFIG_CPU_MIPSR6 */
-#define LoadHWU(addr, value, res) \
+#define _LoadHWU(addr, value, res, type) \
__asm__ __volatile__ ( \
".set\tnoat\n" \
- "1:\t"user_lbu("%0", "0(%2)")"\n" \
- "2:\t"user_lbu("$1", "1(%2)")"\n\t" \
+ "1:\t"type##_lbu("%0", "0(%2)")"\n" \
+ "2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
@@ -204,10 +204,10 @@ extern void show_registers(struct pt_regs *regs);
: "r" (addr), "i" (-EFAULT));
#ifndef CONFIG_CPU_MIPSR6
-#define LoadWU(addr, value, res) \
+#define _LoadWU(addr, value, res, type) \
__asm__ __volatile__ ( \
- "1:\t"user_lwl("%0", "(%2)")"\n" \
- "2:\t"user_lwr("%0", "3(%2)")"\n\t" \
+ "1:\t"type##_lwl("%0", "(%2)")"\n" \
+ "2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
"dsll\t%0, %0, 32\n\t" \
"dsrl\t%0, %0, 32\n\t" \
"li\t%1, 0\n" \
@@ -224,7 +224,7 @@ extern void show_registers(struct pt_regs *regs);
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT));
-#define LoadDW(addr, value, res) \
+#define _LoadDW(addr, value, res) \
__asm__ __volatile__ ( \
"1:\tldl\t%0, (%2)\n" \
"2:\tldr\t%0, 7(%2)\n\t" \
@@ -243,18 +243,18 @@ extern void show_registers(struct pt_regs *regs);
: "r" (addr), "i" (-EFAULT));
#else
/* MIPSR6 has not lwl and ldl instructions */
-#define LoadWU(addr, value, res) \
+#define _LoadWU(addr, value, res, type) \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
- "1:"user_lbu("%0", "0(%2)")"\n\t" \
- "2:"user_lbu("$1", "1(%2)")"\n\t" \
+ "1:"type##_lbu("%0", "0(%2)")"\n\t" \
+ "2:"type##_lbu("$1", "1(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
- "3:"user_lbu("$1", "2(%2)")"\n\t" \
+ "3:"type##_lbu("$1", "2(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
- "4:"user_lbu("$1", "3(%2)")"\n\t" \
+ "4:"type##_lbu("$1", "3(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
@@ -274,7 +274,7 @@ extern void show_registers(struct pt_regs *regs);
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT));
-#define LoadDW(addr, value, res) \
+#define _LoadDW(addr, value, res) \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -323,12 +323,12 @@ extern void show_registers(struct pt_regs *regs);
#endif /* CONFIG_CPU_MIPSR6 */
-#define StoreHW(addr, value, res) \
+#define _StoreHW(addr, value, res, type) \
__asm__ __volatile__ ( \
".set\tnoat\n" \
- "1:\t"user_sb("%1", "1(%2)")"\n" \
+ "1:\t"type##_sb("%1", "1(%2)")"\n" \
"srl\t$1, %1, 0x8\n" \
- "2:\t"user_sb("$1", "0(%2)")"\n" \
+ "2:\t"type##_sb("$1", "0(%2)")"\n" \
".set\tat\n\t" \
"li\t%0, 0\n" \
"3:\n\t" \
@@ -345,10 +345,10 @@ extern void show_registers(struct pt_regs *regs);
: "r" (value), "r" (addr), "i" (-EFAULT));
#ifndef CONFIG_CPU_MIPSR6
-#define StoreW(addr, value, res) \
+#define _StoreW(addr, value, res, type) \
__asm__ __volatile__ ( \
- "1:\t"user_swl("%1", "(%2)")"\n" \
- "2:\t"user_swr("%1", "3(%2)")"\n\t" \
+ "1:\t"type##_swl("%1", "(%2)")"\n" \
+ "2:\t"type##_swr("%1", "3(%2)")"\n\t"\
"li\t%0, 0\n" \
"3:\n\t" \
".insn\n\t" \
@@ -363,7 +363,7 @@ extern void show_registers(struct pt_regs *regs);
: "=r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT));
-#define StoreDW(addr, value, res) \
+#define _StoreDW(addr, value, res) \
__asm__ __volatile__ ( \
"1:\tsdl\t%1,(%2)\n" \
"2:\tsdr\t%1, 7(%2)\n\t" \
@@ -382,17 +382,17 @@ extern void show_registers(struct pt_regs *regs);
: "r" (value), "r" (addr), "i" (-EFAULT));
#else
/* MIPSR6 has no swl and sdl instructions */
-#define StoreW(addr, value, res) \
+#define _StoreW(addr, value, res, type) \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
- "1:"user_sb("%1", "3(%2)")"\n\t" \
+ "1:"type##_sb("%1", "3(%2)")"\n\t" \
"srl\t$1, %1, 0x8\n\t" \
- "2:"user_sb("$1", "2(%2)")"\n\t" \
+ "2:"type##_sb("$1", "2(%2)")"\n\t" \
"srl\t$1, $1, 0x8\n\t" \
- "3:"user_sb("$1", "1(%2)")"\n\t" \
+ "3:"type##_sb("$1", "1(%2)")"\n\t" \
"srl\t$1, $1, 0x8\n\t" \
- "4:"user_sb("$1", "0(%2)")"\n\t" \
+ "4:"type##_sb("$1", "0(%2)")"\n\t" \
".set\tpop\n\t" \
"li\t%0, 0\n" \
"10:\n\t" \
@@ -456,10 +456,10 @@ extern void show_registers(struct pt_regs *regs);
#else /* __BIG_ENDIAN */
-#define LoadHW(addr, value, res) \
+#define _LoadHW(addr, value, res, type) \
__asm__ __volatile__ (".set\tnoat\n" \
- "1:\t"user_lb("%0", "1(%2)")"\n" \
- "2:\t"user_lbu("$1", "0(%2)")"\n\t" \
+ "1:\t"type##_lb("%0", "1(%2)")"\n" \
+ "2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
@@ -477,10 +477,10 @@ extern void show_registers(struct pt_regs *regs);
: "r" (addr), "i" (-EFAULT));
#ifndef CONFIG_CPU_MIPSR6
-#define LoadW(addr, value, res) \
+#define _LoadW(addr, value, res, type) \
__asm__ __volatile__ ( \
- "1:\t"user_lwl("%0", "3(%2)")"\n" \
- "2:\t"user_lwr("%0", "(%2)")"\n\t" \
+ "1:\t"type##_lwl("%0", "3(%2)")"\n" \
+ "2:\t"type##_lwr("%0", "(%2)")"\n\t"\
"li\t%1, 0\n" \
"3:\n\t" \
".insn\n\t" \
@@ -496,18 +496,18 @@ extern void show_registers(struct pt_regs *regs);
: "r" (addr), "i" (-EFAULT));
#else
/* MIPSR6 has no lwl instruction */
-#define LoadW(addr, value, res) \
+#define _LoadW(addr, value, res, type) \
__asm__ __volatile__ ( \
".set\tpush\n" \
".set\tnoat\n\t" \
- "1:"user_lb("%0", "3(%2)")"\n\t" \
- "2:"user_lbu("$1", "2(%2)")"\n\t" \
+ "1:"type##_lb("%0", "3(%2)")"\n\t" \
+ "2:"type##_lbu("$1", "2(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
- "3:"user_lbu("$1", "1(%2)")"\n\t" \
+ "3:"type##_lbu("$1", "1(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
- "4:"user_lbu("$1", "0(%2)")"\n\t" \
+ "4:"type##_lbu("$1", "0(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
@@ -529,11 +529,11 @@ extern void show_registers(struct pt_regs *regs);
#endif /* CONFIG_CPU_MIPSR6 */
-#define LoadHWU(addr, value, res) \
+#define _LoadHWU(addr, value, res, type) \
__asm__ __volatile__ ( \
".set\tnoat\n" \
- "1:\t"user_lbu("%0", "1(%2)")"\n" \
- "2:\t"user_lbu("$1", "0(%2)")"\n\t" \
+ "1:\t"type##_lbu("%0", "1(%2)")"\n" \
+ "2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
@@ -552,10 +552,10 @@ extern void show_registers(struct pt_regs *regs);
: "r" (addr), "i" (-EFAULT));
#ifndef CONFIG_CPU_MIPSR6
-#define LoadWU(addr, value, res) \
+#define _LoadWU(addr, value, res, type) \
__asm__ __volatile__ ( \
- "1:\t"user_lwl("%0", "3(%2)")"\n" \
- "2:\t"user_lwr("%0", "(%2)")"\n\t" \
+ "1:\t"type##_lwl("%0", "3(%2)")"\n" \
+ "2:\t"type##_lwr("%0", "(%2)")"\n\t"\
"dsll\t%0, %0, 32\n\t" \
"dsrl\t%0, %0, 32\n\t" \
"li\t%1, 0\n" \
@@ -572,7 +572,7 @@ extern void show_registers(struct pt_regs *regs);
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT));
-#define LoadDW(addr, value, res) \
+#define _LoadDW(addr, value, res) \
__asm__ __volatile__ ( \
"1:\tldl\t%0, 7(%2)\n" \
"2:\tldr\t%0, (%2)\n\t" \
@@ -591,18 +591,18 @@ extern void show_registers(struct pt_regs *regs);
: "r" (addr), "i" (-EFAULT));
#else
/* MIPSR6 has not lwl and ldl instructions */
-#define LoadWU(addr, value, res) \
+#define _LoadWU(addr, value, res, type) \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
- "1:"user_lbu("%0", "3(%2)")"\n\t" \
- "2:"user_lbu("$1", "2(%2)")"\n\t" \
+ "1:"type##_lbu("%0", "3(%2)")"\n\t" \
+ "2:"type##_lbu("$1", "2(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
- "3:"user_lbu("$1", "1(%2)")"\n\t" \
+ "3:"type##_lbu("$1", "1(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
- "4:"user_lbu("$1", "0(%2)")"\n\t" \
+ "4:"type##_lbu("$1", "0(%2)")"\n\t" \
"sll\t%0, 0x8\n\t" \
"or\t%0, $1\n\t" \
"li\t%1, 0\n" \
@@ -622,7 +622,7 @@ extern void show_registers(struct pt_regs *regs);
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT));
-#define LoadDW(addr, value, res) \
+#define _LoadDW(addr, value, res) \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -670,12 +670,12 @@ extern void show_registers(struct pt_regs *regs);
: "r" (addr), "i" (-EFAULT));
#endif /* CONFIG_CPU_MIPSR6 */
-#define StoreHW(addr, value, res) \
+#define _StoreHW(addr, value, res, type) \
__asm__ __volatile__ ( \
".set\tnoat\n" \
- "1:\t"user_sb("%1", "0(%2)")"\n" \
+ "1:\t"type##_sb("%1", "0(%2)")"\n" \
"srl\t$1,%1, 0x8\n" \
- "2:\t"user_sb("$1", "1(%2)")"\n" \
+ "2:\t"type##_sb("$1", "1(%2)")"\n" \
".set\tat\n\t" \
"li\t%0, 0\n" \
"3:\n\t" \
@@ -691,10 +691,10 @@ extern void show_registers(struct pt_regs *regs);
: "=r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT));
#ifndef CONFIG_CPU_MIPSR6
-#define StoreW(addr, value, res) \
+#define _StoreW(addr, value, res, type) \
__asm__ __volatile__ ( \
- "1:\t"user_swl("%1", "3(%2)")"\n" \
- "2:\t"user_swr("%1", "(%2)")"\n\t" \
+ "1:\t"type##_swl("%1", "3(%2)")"\n" \
+ "2:\t"type##_swr("%1", "(%2)")"\n\t"\
"li\t%0, 0\n" \
"3:\n\t" \
".insn\n\t" \
@@ -709,7 +709,7 @@ extern void show_registers(struct pt_regs *regs);
: "=r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT));
-#define StoreDW(addr, value, res) \
+#define _StoreDW(addr, value, res) \
__asm__ __volatile__ ( \
"1:\tsdl\t%1, 7(%2)\n" \
"2:\tsdr\t%1, (%2)\n\t" \
@@ -728,17 +728,17 @@ extern void show_registers(struct pt_regs *regs);
: "r" (value), "r" (addr), "i" (-EFAULT));
#else
/* MIPSR6 has no swl and sdl instructions */
-#define StoreW(addr, value, res) \
+#define _StoreW(addr, value, res, type) \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
- "1:"user_sb("%1", "0(%2)")"\n\t" \
+ "1:"type##_sb("%1", "0(%2)")"\n\t" \
"srl\t$1, %1, 0x8\n\t" \
- "2:"user_sb("$1", "1(%2)")"\n\t" \
+ "2:"type##_sb("$1", "1(%2)")"\n\t" \
"srl\t$1, $1, 0x8\n\t" \
- "3:"user_sb("$1", "2(%2)")"\n\t" \
+ "3:"type##_sb("$1", "2(%2)")"\n\t" \
"srl\t$1, $1, 0x8\n\t" \
- "4:"user_sb("$1", "3(%2)")"\n\t" \
+ "4:"type##_sb("$1", "3(%2)")"\n\t" \
".set\tpop\n\t" \
"li\t%0, 0\n" \
"10:\n\t" \
@@ -757,7 +757,7 @@ extern void show_registers(struct pt_regs *regs);
: "r" (value), "r" (addr), "i" (-EFAULT) \
: "memory");
-#define StoreDW(addr, value, res) \
+#define _StoreDW(addr, value, res) \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -801,6 +801,22 @@ extern void show_registers(struct pt_regs *regs);
#endif /* CONFIG_CPU_MIPSR6 */
#endif
+#define LoadHWU(addr, value, res) _LoadHWU(addr, value, res, kernel)
+#define LoadHWUE(addr, value, res) _LoadHWU(addr, value, res, user)
+#define LoadWU(addr, value, res) _LoadWU(addr, value, res, kernel)
+#define LoadWUE(addr, value, res) _LoadWU(addr, value, res, user)
+#define LoadHW(addr, value, res) _LoadHW(addr, value, res, kernel)
+#define LoadHWE(addr, value, res) _LoadHW(addr, value, res, user)
+#define LoadW(addr, value, res) _LoadW(addr, value, res, kernel)
+#define LoadWE(addr, value, res) _LoadW(addr, value, res, user)
+#define LoadDW(addr, value, res) _LoadDW(addr, value, res)
+
+#define StoreHW(addr, value, res) _StoreHW(addr, value, res, kernel)
+#define StoreHWE(addr, value, res) _StoreHW(addr, value, res, user)
+#define StoreW(addr, value, res) _StoreW(addr, value, res, kernel)
+#define StoreWE(addr, value, res) _StoreW(addr, value, res, user)
+#define StoreDW(addr, value, res) _StoreDW(addr, value, res)
+
static void emulate_load_store_insn(struct pt_regs *regs,
void __user *addr, unsigned int __user *pc)
{
@@ -872,7 +888,7 @@ static void emulate_load_store_insn(struct pt_regs *regs,
set_fs(seg);
goto sigbus;
}
- LoadHW(addr, value, res);
+ LoadHWE(addr, value, res);
if (res) {
set_fs(seg);
goto fault;
@@ -885,7 +901,7 @@ static void emulate_load_store_insn(struct pt_regs *regs,
set_fs(seg);
goto sigbus;
}
- LoadW(addr, value, res);
+ LoadWE(addr, value, res);
if (res) {
set_fs(seg);
goto fault;
@@ -898,7 +914,7 @@ static void emulate_load_store_insn(struct pt_regs *regs,
set_fs(seg);
goto sigbus;
}
- LoadHWU(addr, value, res);
+ LoadHWUE(addr, value, res);
if (res) {
set_fs(seg);
goto fault;
@@ -913,7 +929,7 @@ static void emulate_load_store_insn(struct pt_regs *regs,
}
compute_return_epc(regs);
value = regs->regs[insn.spec3_format.rt];
- StoreHW(addr, value, res);
+ StoreHWE(addr, value, res);
if (res) {
set_fs(seg);
goto fault;
@@ -926,7 +942,7 @@ static void emulate_load_store_insn(struct pt_regs *regs,
}
compute_return_epc(regs);
value = regs->regs[insn.spec3_format.rt];
- StoreW(addr, value, res);
+ StoreWE(addr, value, res);
if (res) {
set_fs(seg);
goto fault;
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 12/31] MIPS: unaligned: Surround load/store macros in do {} while statements
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (16 preceding siblings ...)
2015-03-09 14:54 ` [PATCH 11/31] MIPS: unaligned: Prevent EVA instructions on kernel unaligned accesses Ralf Baechle
@ 2015-03-09 14:54 ` Ralf Baechle
2015-03-09 14:54 ` [PATCH 13/31] MIPS: unaligned: Fix regular load/store instruction emulation for EVA Ralf Baechle
` (12 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-03-09 14:54 UTC (permalink / raw)
To: stable
From: Markos Chandras <markos.chandras@imgtec.com>
It's best to surround such complex macros with do {} while statements
so they can appear as independent logical blocks when used within other
control blocks.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: <stable@vger.kernel.org> # v3.15+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9502/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/kernel/unaligned.c | 116 +++++++++++++++++++++++++++++++++----------
1 file changed, 90 insertions(+), 26 deletions(-)
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index 7a5707e..ab47590 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -110,6 +110,7 @@ extern void show_registers(struct pt_regs *regs);
#ifdef __BIG_ENDIAN
#define _LoadHW(addr, value, res, type) \
+do { \
__asm__ __volatile__ (".set\tnoat\n" \
"1:\t"type##_lb("%0", "0(%2)")"\n" \
"2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
@@ -127,10 +128,12 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#ifndef CONFIG_CPU_MIPSR6
#define _LoadW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
"1:\t"type##_lwl("%0", "(%2)")"\n" \
"2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
@@ -146,10 +149,13 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#else
/* MIPSR6 has no lwl instruction */
#define _LoadW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n" \
".set\tnoat\n\t" \
@@ -178,10 +184,13 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t4b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#endif /* CONFIG_CPU_MIPSR6 */
#define _LoadHWU(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tnoat\n" \
"1:\t"type##_lbu("%0", "0(%2)")"\n" \
@@ -201,10 +210,12 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#ifndef CONFIG_CPU_MIPSR6
#define _LoadWU(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
"1:\t"type##_lwl("%0", "(%2)")"\n" \
"2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
@@ -222,9 +233,11 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#define _LoadDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
"1:\tldl\t%0, (%2)\n" \
"2:\tldr\t%0, 7(%2)\n\t" \
@@ -240,10 +253,13 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#else
/* MIPSR6 has not lwl and ldl instructions */
#define _LoadWU(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -272,9 +288,11 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t4b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#define _LoadDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -319,11 +337,14 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t8b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#endif /* CONFIG_CPU_MIPSR6 */
#define _StoreHW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tnoat\n" \
"1:\t"type##_sb("%1", "1(%2)")"\n" \
@@ -342,10 +363,12 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT));
+ : "r" (value), "r" (addr), "i" (-EFAULT));\
+} while(0)
#ifndef CONFIG_CPU_MIPSR6
#define _StoreW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
"1:\t"type##_swl("%1", "(%2)")"\n" \
"2:\t"type##_swr("%1", "3(%2)")"\n\t"\
@@ -361,9 +384,11 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT));
+ : "r" (value), "r" (addr), "i" (-EFAULT)); \
+} while(0)
#define _StoreDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
"1:\tsdl\t%1,(%2)\n" \
"2:\tsdr\t%1, 7(%2)\n\t" \
@@ -379,10 +404,13 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT));
+ : "r" (value), "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#else
/* MIPSR6 has no swl and sdl instructions */
#define _StoreW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -409,9 +437,11 @@ extern void show_registers(struct pt_regs *regs);
".previous" \
: "=&r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT) \
- : "memory");
+ : "memory"); \
+} while(0)
#define StoreDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -451,12 +481,15 @@ extern void show_registers(struct pt_regs *regs);
".previous" \
: "=&r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT) \
- : "memory");
+ : "memory"); \
+} while(0)
+
#endif /* CONFIG_CPU_MIPSR6 */
#else /* __BIG_ENDIAN */
#define _LoadHW(addr, value, res, type) \
+do { \
__asm__ __volatile__ (".set\tnoat\n" \
"1:\t"type##_lb("%0", "1(%2)")"\n" \
"2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
@@ -474,10 +507,12 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#ifndef CONFIG_CPU_MIPSR6
#define _LoadW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
"1:\t"type##_lwl("%0", "3(%2)")"\n" \
"2:\t"type##_lwr("%0", "(%2)")"\n\t"\
@@ -493,10 +528,13 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#else
/* MIPSR6 has no lwl instruction */
#define _LoadW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n" \
".set\tnoat\n\t" \
@@ -525,11 +563,14 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t4b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#endif /* CONFIG_CPU_MIPSR6 */
#define _LoadHWU(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tnoat\n" \
"1:\t"type##_lbu("%0", "1(%2)")"\n" \
@@ -549,10 +590,12 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#ifndef CONFIG_CPU_MIPSR6
#define _LoadWU(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
"1:\t"type##_lwl("%0", "3(%2)")"\n" \
"2:\t"type##_lwr("%0", "(%2)")"\n\t"\
@@ -570,9 +613,11 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#define _LoadDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
"1:\tldl\t%0, 7(%2)\n" \
"2:\tldr\t%0, (%2)\n\t" \
@@ -588,10 +633,13 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#else
/* MIPSR6 has not lwl and ldl instructions */
#define _LoadWU(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -620,9 +668,11 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t4b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#define _LoadDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -667,10 +717,12 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t8b, 11b\n\t" \
".previous" \
: "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT));
+ : "r" (addr), "i" (-EFAULT)); \
+} while(0)
#endif /* CONFIG_CPU_MIPSR6 */
#define _StoreHW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tnoat\n" \
"1:\t"type##_sb("%1", "0(%2)")"\n" \
@@ -689,9 +741,12 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT));
+ : "r" (value), "r" (addr), "i" (-EFAULT));\
+} while(0)
+
#ifndef CONFIG_CPU_MIPSR6
#define _StoreW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
"1:\t"type##_swl("%1", "3(%2)")"\n" \
"2:\t"type##_swr("%1", "(%2)")"\n\t"\
@@ -707,9 +762,11 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT));
+ : "r" (value), "r" (addr), "i" (-EFAULT)); \
+} while(0)
#define _StoreDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
"1:\tsdl\t%1, 7(%2)\n" \
"2:\tsdr\t%1, (%2)\n\t" \
@@ -725,10 +782,13 @@ extern void show_registers(struct pt_regs *regs);
STR(PTR)"\t2b, 4b\n\t" \
".previous" \
: "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT));
+ : "r" (value), "r" (addr), "i" (-EFAULT)); \
+} while(0)
+
#else
/* MIPSR6 has no swl and sdl instructions */
#define _StoreW(addr, value, res, type) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -755,9 +815,11 @@ extern void show_registers(struct pt_regs *regs);
".previous" \
: "=&r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT) \
- : "memory");
+ : "memory"); \
+} while(0)
#define _StoreDW(addr, value, res) \
+do { \
__asm__ __volatile__ ( \
".set\tpush\n\t" \
".set\tnoat\n\t" \
@@ -797,7 +859,9 @@ extern void show_registers(struct pt_regs *regs);
".previous" \
: "=&r" (res) \
: "r" (value), "r" (addr), "i" (-EFAULT) \
- : "memory");
+ : "memory"); \
+} while(0)
+
#endif /* CONFIG_CPU_MIPSR6 */
#endif
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 13/31] MIPS: unaligned: Fix regular load/store instruction emulation for EVA
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (17 preceding siblings ...)
2015-03-09 14:54 ` [PATCH 12/31] MIPS: unaligned: Surround load/store macros in do {} while statements Ralf Baechle
@ 2015-03-09 14:54 ` Ralf Baechle
2015-03-10 12:30 ` [PATCH 14/31] MIPS: Kconfig: Fix typo for the r2-to-r6 emulator kernel parameter Ralf Baechle
` (11 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-03-09 14:54 UTC (permalink / raw)
To: stable
From: Markos Chandras <markos.chandras@imgtec.com>
When emulating a regular lh/lw/lhu/sh/sw we need to use the appropriate
instruction if we are in EVA mode. This is necessary for userspace
applications which trigger alignment exceptions. In such case, the
userspace load/store instruction needs to be emulated with the correct
eva/non-eva instruction by the kernel emulator.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Fixes: c1771216ab48 ("MIPS: kernel: unaligned: Handle unaligned accesses for EVA")
Cc: <stable@vger.kernel.org> # v3.15+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9503/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/kernel/unaligned.c | 52 +++++++++++++++++++++++++++++++++++++++-----
1 file changed, 47 insertions(+), 5 deletions(-)
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index ab47590..7659da2 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -1023,7 +1023,15 @@ static void emulate_load_store_insn(struct pt_regs *regs,
if (!access_ok(VERIFY_READ, addr, 2))
goto sigbus;
- LoadHW(addr, value, res);
+ if (config_enabled(CONFIG_EVA)) {
+ if (segment_eq(get_fs(), get_ds()))
+ LoadHW(addr, value, res);
+ else
+ LoadHWE(addr, value, res);
+ } else {
+ LoadHW(addr, value, res);
+ }
+
if (res)
goto fault;
compute_return_epc(regs);
@@ -1034,7 +1042,15 @@ static void emulate_load_store_insn(struct pt_regs *regs,
if (!access_ok(VERIFY_READ, addr, 4))
goto sigbus;
- LoadW(addr, value, res);
+ if (config_enabled(CONFIG_EVA)) {
+ if (segment_eq(get_fs(), get_ds()))
+ LoadW(addr, value, res);
+ else
+ LoadWE(addr, value, res);
+ } else {
+ LoadW(addr, value, res);
+ }
+
if (res)
goto fault;
compute_return_epc(regs);
@@ -1045,7 +1061,15 @@ static void emulate_load_store_insn(struct pt_regs *regs,
if (!access_ok(VERIFY_READ, addr, 2))
goto sigbus;
- LoadHWU(addr, value, res);
+ if (config_enabled(CONFIG_EVA)) {
+ if (segment_eq(get_fs(), get_ds()))
+ LoadHWU(addr, value, res);
+ else
+ LoadHWUE(addr, value, res);
+ } else {
+ LoadHWU(addr, value, res);
+ }
+
if (res)
goto fault;
compute_return_epc(regs);
@@ -1104,7 +1128,16 @@ static void emulate_load_store_insn(struct pt_regs *regs,
compute_return_epc(regs);
value = regs->regs[insn.i_format.rt];
- StoreHW(addr, value, res);
+
+ if (config_enabled(CONFIG_EVA)) {
+ if (segment_eq(get_fs(), get_ds()))
+ StoreHW(addr, value, res);
+ else
+ StoreHWE(addr, value, res);
+ } else {
+ StoreHW(addr, value, res);
+ }
+
if (res)
goto fault;
break;
@@ -1115,7 +1148,16 @@ static void emulate_load_store_insn(struct pt_regs *regs,
compute_return_epc(regs);
value = regs->regs[insn.i_format.rt];
- StoreW(addr, value, res);
+
+ if (config_enabled(CONFIG_EVA)) {
+ if (segment_eq(get_fs(), get_ds()))
+ StoreW(addr, value, res);
+ else
+ StoreWE(addr, value, res);
+ } else {
+ StoreW(addr, value, res);
+ }
+
if (res)
goto fault;
break;
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 14/31] MIPS: Kconfig: Fix typo for the r2-to-r6 emulator kernel parameter
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (18 preceding siblings ...)
2015-03-09 14:54 ` [PATCH 13/31] MIPS: unaligned: Fix regular load/store instruction emulation for EVA Ralf Baechle
@ 2015-03-10 12:30 ` Ralf Baechle
2015-03-12 3:51 ` [PATCH 02/31] MIPS: Loongson-3: Add IRQF_NO_SUSPEND to Cascade irqaction Ralf Baechle
` (10 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-03-10 12:30 UTC (permalink / raw)
To: stable
From: Markos Chandras <markos.chandras@imgtec.com>
Commit b0a668fb2038 ("MIPS: kernel: mips-r2-to-r6-emul: Add R2 emulator
for MIPS R6") added the mips r2-to-r6 emulator so an R2 userland can be
executed on R6 kernels. This needed both build time and runtime support.
The runtime support needed the "mipsr2emu" kernel parameter instead of
the "mipsr2emul" listed in the Kconfig help message.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Fixes: b0a668fb2038 ("MIPS: kernel: mips-r2-to-r6-emul: Add R2 emulator for MIPS R6")
Cc: linux-mips@linux-mips.org
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/9504/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 69a3b0f..7222592 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2107,7 +2107,7 @@ config MIPSR2_TO_R6_EMULATOR
help
Choose this option if you want to run non-R6 MIPS userland code.
Even if you say 'Y' here, the emulator will still be disabled by
- default. You can enable it using the 'mipsr2emul' kernel option.
+ default. You can enable it using the 'mipsr2emu' kernel option.
The only reason this is a build-time option is to save ~14K from the
final kernel image.
comment "MIPS R2-to-R6 emulator is only available for UP kernels"
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 02/31] MIPS: Loongson-3: Add IRQF_NO_SUSPEND to Cascade irqaction
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (19 preceding siblings ...)
2015-03-10 12:30 ` [PATCH 14/31] MIPS: Kconfig: Fix typo for the r2-to-r6 emulator kernel parameter Ralf Baechle
@ 2015-03-12 3:51 ` Ralf Baechle
2015-03-12 16:00 ` [PATCH 01/31] MIPS: BCM63xx: Move bcm63xx_gpio_init() to bcm63xx_register_devices() Ralf Baechle
` (9 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-03-12 3:51 UTC (permalink / raw)
To: stable
From: Huacai Chen <chenhc@lemote.com>
HPET irq is routed to i8259 and then to MIPS CPU irq (cascade). After
commit a3e6c1eff5 (MIPS: IRQ: Fix disable_irq on CPU IRQs), if without
IRQF_NO_SUSPEND in cascade_irqaction, HPET interrupts will lost during
suspend. The result is machine cannot be waken up.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: <stable@vger.kernel.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/9528/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/loongson/loongson-3/irq.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/mips/loongson/loongson-3/irq.c b/arch/mips/loongson/loongson-3/irq.c
index 21221ed..0f75b6b 100644
--- a/arch/mips/loongson/loongson-3/irq.c
+++ b/arch/mips/loongson/loongson-3/irq.c
@@ -44,6 +44,7 @@ void mach_irq_dispatch(unsigned int pending)
static struct irqaction cascade_irqaction = {
.handler = no_action,
+ .flags = IRQF_NO_SUSPEND,
.name = "cascade",
};
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 01/31] MIPS: BCM63xx: Move bcm63xx_gpio_init() to bcm63xx_register_devices().
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (20 preceding siblings ...)
2015-03-12 3:51 ` [PATCH 02/31] MIPS: Loongson-3: Add IRQF_NO_SUSPEND to Cascade irqaction Ralf Baechle
@ 2015-03-12 16:00 ` Ralf Baechle
2015-03-18 13:05 ` [PATCH 07/31] MIPS: Octeon: Remove udelay() causing huge IRQ latency Ralf Baechle
` (8 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-03-12 16:00 UTC (permalink / raw)
To: stable
From: Nicolas Schichan <nschichan@freebox.fr>
When called from prom init code, bcm63xx_gpio_init() will fail as it
will call gpiochip_add() which relies on a working kmalloc() to alloc
the gpio_desc array and kmalloc is not useable yet at prom init time.
Move bcm63xx_gpio_init() to bcm63xx_register_devices() (an
arch_initcall) where kmalloc works.
Fixes: 14e85c0e69d5 ("gpio: remove gpio_descs global array")
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Alexandre Courbot <acourbot@nvidia.com>
Patchwork: https://patchwork.linux-mips.org/patch/9530/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/bcm63xx/prom.c | 4 ----
arch/mips/bcm63xx/setup.c | 4 ++++
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/mips/bcm63xx/prom.c b/arch/mips/bcm63xx/prom.c
index e1f27d6..7019e29 100644
--- a/arch/mips/bcm63xx/prom.c
+++ b/arch/mips/bcm63xx/prom.c
@@ -17,7 +17,6 @@
#include <bcm63xx_cpu.h>
#include <bcm63xx_io.h>
#include <bcm63xx_regs.h>
-#include <bcm63xx_gpio.h>
void __init prom_init(void)
{
@@ -53,9 +52,6 @@ void __init prom_init(void)
reg &= ~mask;
bcm_perf_writel(reg, PERF_CKCTL_REG);
- /* register gpiochip */
- bcm63xx_gpio_init();
-
/* do low level board init */
board_prom_init();
diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c
index 6660c7d..240fb4f 100644
--- a/arch/mips/bcm63xx/setup.c
+++ b/arch/mips/bcm63xx/setup.c
@@ -20,6 +20,7 @@
#include <bcm63xx_cpu.h>
#include <bcm63xx_regs.h>
#include <bcm63xx_io.h>
+#include <bcm63xx_gpio.h>
void bcm63xx_machine_halt(void)
{
@@ -160,6 +161,9 @@ void __init plat_mem_setup(void)
int __init bcm63xx_register_devices(void)
{
+ /* register gpiochip */
+ bcm63xx_gpio_init();
+
return board_register_devices();
}
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 07/31] MIPS: Octeon: Remove udelay() causing huge IRQ latency
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (21 preceding siblings ...)
2015-03-12 16:00 ` [PATCH 01/31] MIPS: BCM63xx: Move bcm63xx_gpio_init() to bcm63xx_register_devices() Ralf Baechle
@ 2015-03-18 13:05 ` Ralf Baechle
2015-03-22 15:55 ` [PATCH 08/31] MIPS: OCTEON: fix PCI interrupt mapping for D-Link DSR-1000N Ralf Baechle
` (7 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-03-18 13:05 UTC (permalink / raw)
To: stable
From: Alexander Sverdlin <alexander.sverdlin@nokia.com>
udelay() in PCI/PCIe read/write callbacks cause 30ms IRQ latency on Octeon
platforms because these operations are called from PCI_OP_READ() and
PCI_OP_WRITE() under raw_spin_lock_irqsave().
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: linux-mips@linux-mips.org
Cc: David Daney <ddaney@cavium.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Masanari Iida <standby24x7@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Mathias <mathias.rulf@nokia.com>
Patchwork: https://patchwork.linux-mips.org/patch/9576/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/include/asm/octeon/pci-octeon.h | 3 ---
arch/mips/pci/pci-octeon.c | 6 ------
arch/mips/pci/pcie-octeon.c | 8 --------
3 files changed, 17 deletions(-)
diff --git a/arch/mips/include/asm/octeon/pci-octeon.h b/arch/mips/include/asm/octeon/pci-octeon.h
index 64ba56a..1884609 100644
--- a/arch/mips/include/asm/octeon/pci-octeon.h
+++ b/arch/mips/include/asm/octeon/pci-octeon.h
@@ -11,9 +11,6 @@
#include <linux/pci.h>
-/* Some PCI cards require delays when accessing config space. */
-#define PCI_CONFIG_SPACE_DELAY 10000
-
/*
* The physical memory base mapped by BAR1. 256MB at the end of the
* first 4GB.
diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c
index a04af55..01c604a 100644
--- a/arch/mips/pci/pci-octeon.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -271,9 +271,6 @@ static int octeon_read_config(struct pci_bus *bus, unsigned int devfn,
pci_addr.s.func = devfn & 0x7;
pci_addr.s.reg = reg;
-#if PCI_CONFIG_SPACE_DELAY
- udelay(PCI_CONFIG_SPACE_DELAY);
-#endif
switch (size) {
case 4:
*val = le32_to_cpu(cvmx_read64_uint32(pci_addr.u64));
@@ -308,9 +305,6 @@ static int octeon_write_config(struct pci_bus *bus, unsigned int devfn,
pci_addr.s.func = devfn & 0x7;
pci_addr.s.reg = reg;
-#if PCI_CONFIG_SPACE_DELAY
- udelay(PCI_CONFIG_SPACE_DELAY);
-#endif
switch (size) {
case 4:
cvmx_write64_uint32(pci_addr.u64, cpu_to_le32(val));
diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c
index 1bb0b2b..99f3db4 100644
--- a/arch/mips/pci/pcie-octeon.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -1762,14 +1762,6 @@ static int octeon_pcie_write_config(unsigned int pcie_port, struct pci_bus *bus,
default:
return PCIBIOS_FUNC_NOT_SUPPORTED;
}
-#if PCI_CONFIG_SPACE_DELAY
- /*
- * Delay on writes so that devices have time to come up. Some
- * bridges need this to allow time for the secondary busses to
- * work
- */
- udelay(PCI_CONFIG_SPACE_DELAY);
-#endif
return PCIBIOS_SUCCESSFUL;
}
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 08/31] MIPS: OCTEON: fix PCI interrupt mapping for D-Link DSR-1000N
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (22 preceding siblings ...)
2015-03-18 13:05 ` [PATCH 07/31] MIPS: Octeon: Remove udelay() causing huge IRQ latency Ralf Baechle
@ 2015-03-22 15:55 ` Ralf Baechle
2015-03-25 12:14 ` [PATCH 18/31] MIPS: Fix cpu_has_mips_r2_exec_hazard Ralf Baechle
` (6 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-03-22 15:55 UTC (permalink / raw)
To: stable
From: Aaro Koskinen <aaro.koskinen@iki.fi>
Fix PCI interrupt mapping for DSR1000N. This will get the PCI slot
interrupts working. The mapping is based on D-Link GPL tarball.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9593/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/pci/pci-octeon.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c
index 01c604a..c258cd4 100644
--- a/arch/mips/pci/pci-octeon.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -214,6 +214,8 @@ const char *octeon_get_pci_interrupts(void)
return "AAABAAAAAAAAAAAAAAAAAAAAAAAAAAAA";
case CVMX_BOARD_TYPE_BBGW_REF:
return "AABCD";
+ case CVMX_BOARD_TYPE_CUST_DSR1000N:
+ return "CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC";
case CVMX_BOARD_TYPE_THUNDER:
case CVMX_BOARD_TYPE_EBH3000:
default:
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 18/31] MIPS: Fix cpu_has_mips_r2_exec_hazard.
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (23 preceding siblings ...)
2015-03-22 15:55 ` [PATCH 08/31] MIPS: OCTEON: fix PCI interrupt mapping for D-Link DSR-1000N Ralf Baechle
@ 2015-03-25 12:14 ` Ralf Baechle
2015-03-25 12:18 ` [PATCH 20/31] Revert "MIPS: Avoid pipeline stalls on some MIPS32R2 cores." Ralf Baechle
` (5 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-03-25 12:14 UTC (permalink / raw)
To: stable
Returns a non-zero value if the current processor implementation requires
an IHB instruction to deal with an instruction hazard as per MIPS R2
architecture specification, zero otherwise.
For a discussion, see http://patchwork.linux-mips.org/patch/9539/.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/include/asm/cpu-features.h | 33 ++++++++++++++++++++++++++++++++-
1 file changed, 32 insertions(+), 1 deletion(-)
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index a324751..49c7a29 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -238,8 +238,39 @@
/* MIPSR2 and MIPSR6 have a lot of similarities */
#define cpu_has_mips_r2_r6 (cpu_has_mips_r2 | cpu_has_mips_r6)
+/*
+ * cpu_has_mips_r2_exec_hazard - return if IHB is required on current processor
+ *
+ * Returns non-zero value if the current processor implementation requires
+ * an IHB instruction to deal with an instruction hazard as per MIPS R2
+ * architecture specification, zero otherwise.
+ */
#ifndef cpu_has_mips_r2_exec_hazard
-#define cpu_has_mips_r2_exec_hazard (cpu_has_mips_r2 | cpu_has_mips_r6)
+#define cpu_has_mips_r2_exec_hazard \
+({ \
+ int __res; \
+ \
+ switch (current_cpu_type()) { \
+ case CPU_M14KC: \
+ case CPU_74K: \
+ case CPU_1074K: \
+ case CPU_PROAPTIV: \
+ case CPU_P5600: \
+ case CPU_M5150: \
+ case CPU_QEMU_GENERIC: \
+ case CPU_CAVIUM_OCTEON: \
+ case CPU_CAVIUM_OCTEON_PLUS: \
+ case CPU_CAVIUM_OCTEON2: \
+ case CPU_CAVIUM_OCTEON3: \
+ __res = 0; \
+ break; \
+ \
+ default: \
+ __res = 1; \
+ } \
+ \
+ __res; \
+})
#endif
/*
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 20/31] Revert "MIPS: Avoid pipeline stalls on some MIPS32R2 cores."
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (24 preceding siblings ...)
2015-03-25 12:14 ` [PATCH 18/31] MIPS: Fix cpu_has_mips_r2_exec_hazard Ralf Baechle
@ 2015-03-25 12:18 ` Ralf Baechle
2015-03-25 12:21 ` [PATCH 19/31] MIPS: Octeon: Delete override of cpu_has_mips_r2_exec_hazard Ralf Baechle
` (4 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-03-25 12:18 UTC (permalink / raw)
To: stable
For a discussion, see http://patchwork.linux-mips.org/patch/9539/.
This reverts commit 625c0a21700bdb90844d926a1508a17a77e369c9.
---
arch/mips/mm/tlbex.c | 21 ++-------------------
1 file changed, 2 insertions(+), 19 deletions(-)
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 7709920..971b1ee 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -512,26 +512,9 @@ static void build_tlb_write_entry(u32 **p, struct uasm_label **l,
case tlb_indexed: tlbw = uasm_i_tlbwi; break;
}
- if (cpu_has_mips_r2_exec_hazard) {
- /*
- * The architecture spec says an ehb is required here,
- * but a number of cores do not have the hazard and
- * using an ehb causes an expensive pipeline stall.
- */
- switch (current_cpu_type()) {
- case CPU_M14KC:
- case CPU_74K:
- case CPU_1074K:
- case CPU_PROAPTIV:
- case CPU_P5600:
- case CPU_M5150:
- case CPU_QEMU_GENERIC:
- break;
-
- default:
+ if (cpu_has_mips_r2_r6) {
+ if (cpu_has_mips_r2_exec_hazard)
uasm_i_ehb(p);
- break;
- }
tlbw(p);
return;
}
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 19/31] MIPS: Octeon: Delete override of cpu_has_mips_r2_exec_hazard.
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (25 preceding siblings ...)
2015-03-25 12:18 ` [PATCH 20/31] Revert "MIPS: Avoid pipeline stalls on some MIPS32R2 cores." Ralf Baechle
@ 2015-03-25 12:21 ` Ralf Baechle
2015-03-25 15:31 ` [PATCH 22/31] SSB: fix Kconfig dependencies Ralf Baechle
` (3 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-03-25 12:21 UTC (permalink / raw)
To: stable
This is no longer needed with the fixed, new and improved definition
of cpu_has_mips_r2_exec_hazard in <asm/cpu-features.h>.
For a discussion, see http://patchwork.linux-mips.org/patch/9539/.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
index fa1f3cf..d68e685 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
@@ -50,7 +50,6 @@
#define cpu_has_mips32r2 0
#define cpu_has_mips64r1 0
#define cpu_has_mips64r2 1
-#define cpu_has_mips_r2_exec_hazard 0
#define cpu_has_dsp 0
#define cpu_has_dsp2 0
#define cpu_has_mipsmt 0
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 22/31] SSB: fix Kconfig dependencies
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (26 preceding siblings ...)
2015-03-25 12:21 ` [PATCH 19/31] MIPS: Octeon: Delete override of cpu_has_mips_r2_exec_hazard Ralf Baechle
@ 2015-03-25 15:31 ` Ralf Baechle
2015-03-29 2:54 ` [PATCH 27/31] MIPS: Hibernate: flush TLB entries earlier Ralf Baechle
` (2 subsequent siblings)
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-03-25 15:31 UTC (permalink / raw)
To: stable
From: Adrien Schildknecht <adrien+dev@schischi.me>
The commit 21400f252a97 ("MIPS: BCM47XX: Make ssb init NVRAM instead of
bcm47xx polling it") introduces a dependency to SSB_SFLASH but did not
add it to the Kconfig.
drivers/ssb/driver_mipscore.c:216:36: error: 'struct ssb_mipscore' has no
member named 'sflash'
struct ssb_sflash *sflash = &mcore->sflash;
^
drivers/ssb/driver_mipscore.c:249:12: error: dereferencing pointer to
incomplete type
if (sflash->present) {
^
Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me>
Cc: m@bues.ch
Cc: zajec5@gmail.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9598/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
drivers/ssb/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
index 75b3603..f0d22cd 100644
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -130,6 +130,7 @@ config SSB_DRIVER_MIPS
bool "SSB Broadcom MIPS core driver"
depends on SSB && MIPS
select SSB_SERIAL
+ select SSB_SFLASH
help
Driver for the Sonics Silicon Backplane attached
Broadcom MIPS core.
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 27/31] MIPS: Hibernate: flush TLB entries earlier
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (27 preceding siblings ...)
2015-03-25 15:31 ` [PATCH 22/31] SSB: fix Kconfig dependencies Ralf Baechle
@ 2015-03-29 2:54 ` Ralf Baechle
2015-04-01 14:01 ` [PATCH 29/31] MIPS: BCM47XX: Fix detecting Microsoft MN-700 & Asus WL500G Ralf Baechle
2015-04-02 13:42 ` [PATCH 31/31] MIPS: Makefile: Fix MIPS ASE detection code Ralf Baechle
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-03-29 2:54 UTC (permalink / raw)
To: stable
From: Huacai Chen <chenhc@lemote.com>
We found that TLB mismatch not only happens after kernel resume, but
also happens during snapshot restore. So move it to the beginning of
swsusp_arch_suspend().
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: <stable@vger.kernel.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9621/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/power/hibernate.S | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/mips/power/hibernate.S b/arch/mips/power/hibernate.S
index 32a7c82..e7567c8 100644
--- a/arch/mips/power/hibernate.S
+++ b/arch/mips/power/hibernate.S
@@ -30,6 +30,8 @@ LEAF(swsusp_arch_suspend)
END(swsusp_arch_suspend)
LEAF(swsusp_arch_resume)
+ /* Avoid TLB mismatch during and after kernel resume */
+ jal local_flush_tlb_all
PTR_L t0, restore_pblist
0:
PTR_L t1, PBE_ADDRESS(t0) /* source */
@@ -43,7 +45,6 @@ LEAF(swsusp_arch_resume)
bne t1, t3, 1b
PTR_L t0, PBE_NEXT(t0)
bnez t0, 0b
- jal local_flush_tlb_all /* Avoid TLB mismatch after kernel resume */
PTR_LA t0, saved_regs
PTR_L ra, PT_R31(t0)
PTR_L sp, PT_R29(t0)
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 29/31] MIPS: BCM47XX: Fix detecting Microsoft MN-700 & Asus WL500G
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (28 preceding siblings ...)
2015-03-29 2:54 ` [PATCH 27/31] MIPS: Hibernate: flush TLB entries earlier Ralf Baechle
@ 2015-04-01 14:01 ` Ralf Baechle
2015-04-02 13:42 ` [PATCH 31/31] MIPS: Makefile: Fix MIPS ASE detection code Ralf Baechle
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-04-01 14:01 UTC (permalink / raw)
To: stable
From: Rafał Miłecki <zajec5@gmail.com>
Since the day of adding this code it was broken. We were iterating over
a wrong array and checking for wrong NVRAM entry.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/9654/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/bcm47xx/board.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/mips/bcm47xx/board.c b/arch/mips/bcm47xx/board.c
index b3ae068..3fd369d 100644
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -247,8 +247,8 @@ static __init const struct bcm47xx_board_type *bcm47xx_board_get_nvram(void)
}
if (bcm47xx_nvram_getenv("hardware_version", buf1, sizeof(buf1)) >= 0 &&
- bcm47xx_nvram_getenv("boardtype", buf2, sizeof(buf2)) >= 0) {
- for (e2 = bcm47xx_board_list_boot_hw; e2->value1; e2++) {
+ bcm47xx_nvram_getenv("boardnum", buf2, sizeof(buf2)) >= 0) {
+ for (e2 = bcm47xx_board_list_hw_version_num; e2->value1; e2++) {
if (!strstarts(buf1, e2->value1) &&
!strcmp(buf2, e2->value2))
return &e2->board;
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [PATCH 31/31] MIPS: Makefile: Fix MIPS ASE detection code
2015-05-05 5:16 [PATCH 00/31] MIPS and SSB fixes for 4.0-stable Ralf Baechle
` (29 preceding siblings ...)
2015-04-01 14:01 ` [PATCH 29/31] MIPS: BCM47XX: Fix detecting Microsoft MN-700 & Asus WL500G Ralf Baechle
@ 2015-04-02 13:42 ` Ralf Baechle
30 siblings, 0 replies; 32+ messages in thread
From: Ralf Baechle @ 2015-04-02 13:42 UTC (permalink / raw)
To: stable
From: Markos Chandras <markos.chandras@imgtec.com>
Commit 32098ec7bcba ("MIPS: Makefile: Move the ASEs checks after
setting the core's CFLAGS") re-arranged the MIPS ASE detection code
and also added the current cflags to the detection logic. However,
this introduced a few bugs. First of all, the mips-cflags should not
be quoted since that ends up being passed as a string to subsequent
commands leading to broken detection from the cc-option-* tools.
Moreover, in order to avoid duplicating the cflags-y because of how
cc-option works, we rework the logic so we pass only those cflags which
are needed by the selected ASE. Finally, fix some typos resulting in MSA
not being detected correctly.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Fixes: Commit 32098ec7bcba ("MIPS: Makefile: Move the ASEs checks after setting the core's CFLAGS")
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9661/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/Makefile | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 8f57fc7..1b4dab1 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -197,11 +197,17 @@ endif
# Warning: the 64-bit MIPS architecture does not support the `smartmips' extension
# Pass -Wa,--no-warn to disable all assembler warnings until the kernel code has
# been fixed properly.
-mips-cflags := "$(cflags-y)"
-cflags-$(CONFIG_CPU_HAS_SMARTMIPS) += $(call cc-option,$(mips-cflags),-msmartmips) -Wa,--no-warn
-cflags-$(CONFIG_CPU_MICROMIPS) += $(call cc-option,$(mips-cflags),-mmicromips)
+mips-cflags := $(cflags-y)
+ifeq ($(CONFIG_CPU_HAS_SMARTMIPS),y)
+smartmips-ase := $(call cc-option-yn,$(mips-cflags) -msmartmips)
+cflags-$(smartmips-ase) += -msmartmips -Wa,--no-warn
+endif
+ifeq ($(CONFIG_CPU_MICROMIPS),y)
+micromips-ase := $(call cc-option-yn,$(mips-cflags) -mmicromips)
+cflags-$(micromips-ase) += -mmicromips
+endif
ifeq ($(CONFIG_CPU_HAS_MSA),y)
-toolchain-msa := $(call cc-option-yn,-$(mips-cflags),mhard-float -mfp64 -Wa$(comma)-mmsa)
+toolchain-msa := $(call cc-option-yn,$(mips-cflags) -mhard-float -mfp64 -Wa$(comma)-mmsa)
cflags-$(toolchain-msa) += -DTOOLCHAIN_SUPPORTS_MSA
endif
--
1.9.3
^ permalink raw reply related [flat|nested] 32+ messages in thread