From: Kimmo Saarela <kimmo.saarela-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Jaroslav Kysela <perex-/Fr2/VpizcU@public.gmane.org>,
Takashi Iwai <tiwai-l3A5Bk7waGM@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
Kimmo Saarela
<kimmo.saarela-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH 0/5] Add configuration options for tlv320aic32x4
Date: Tue, 30 Jun 2015 13:25:08 +0300 [thread overview]
Message-ID: <cover.1435569929.git.kimmo.saarela@gmail.com> (raw)
* Patch 1: Make tlv320aic32x4 module selectable on it's own on config system
* Make codec visible in config tool, instead of magic selection via certain
board option
* Patch 2: Don't stop driver initialization if mlck is not defined
* Only warn if mclk isn't in dtb file, such cases exist when other end of
I2S bus provides the clock for the system and coded is not in control
* Patch 3: Fix bus signal polarity configuration
* Fix driver to use correct format polarity bits in config word, instead of
magically setting polarity in format configuration
* Patch 4: Add more devicetree options to driver
* Add input-use and cmode array options to configure codec input pins
properly. Current driver lets unused input pins to float.
* Add swapdacs option, works similarly to old platform data option. When
enabled, swaps output channels
* Add powercfg config mask to pass codec power options, like: micbias off,
configurable ldoin voltage, disable weak pull between AVDD and DVDD,
configurable LDO voltages
* Patch 5: Update codec documentation to meet changes above
Kimmo Saarela (5):
sound/soc/codecs: Make tlv320aic32x4 codec selectable on it's own
ASoC: tlv320aic32x4: Make mclk optional
ASoC: tlv320aic32x4: Move bit polarity config to specific switch
statement
ASoC: tlv320aic32x4: Change codec input config options
ASoC: tlv320aic32x4: Update devicetree documentation
.../devicetree/bindings/sound/tlv320aic32x4.txt | 27 ++-
include/sound/tlv320aic32x4.h | 8 +
sound/soc/codecs/Kconfig | 3 +-
sound/soc/codecs/tlv320aic32x4.c | 244 ++++++++++++++++++---
sound/soc/codecs/tlv320aic32x4.h | 10 +
5 files changed, 258 insertions(+), 34 deletions(-)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2015-06-30 10:25 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-30 10:25 Kimmo Saarela [this message]
[not found] ` <cover.1435569929.git.kimmo.saarela-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-06-30 10:25 ` [PATCH 1/5] sound/soc/codecs: Make tlv320aic32x4 codec selectable on it's own Kimmo Saarela
2015-06-30 10:25 ` [PATCH 2/5] ASoC: tlv320aic32x4: Make mclk optional Kimmo Saarela
2015-06-30 10:25 ` [PATCH 3/5] ASoC: tlv320aic32x4: Move bit polarity config to specific switch statement Kimmo Saarela
2015-06-30 10:25 ` [PATCH 4/5] ASoC: tlv320aic32x4: Change codec input config options Kimmo Saarela
2015-06-30 10:25 ` [PATCH 5/5] ASoC: tlv320aic32x4: Update devicetree documentation Kimmo Saarela
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1435569929.git.kimmo.saarela@gmail.com \
--to=kimmo.saarela-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=perex-/Fr2/VpizcU@public.gmane.org \
--cc=tiwai-l3A5Bk7waGM@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.