From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pavel Fedin Subject: [PATCH v3 0/4] Exynos SROMc configuration and Ethernet support for SMDK5410 Date: Wed, 28 Oct 2015 10:57:34 +0300 Message-ID: Return-path: Received: from mailout3.w1.samsung.com ([210.118.77.13]:24141 "EHLO mailout3.w1.samsung.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753402AbbJ1H5p (ORCPT ); Wed, 28 Oct 2015 03:57:45 -0400 Received: from eucpsbgm1.samsung.com (unknown [203.254.199.244]) by mailout3.w1.samsung.com (Oracle Communications Messaging Server 7.0.5.31.0 64bit (built May 5 2014)) with ESMTP id <0NWX00JUF7G6H740@mailout3.w1.samsung.com> for linux-samsung-soc@vger.kernel.org; Wed, 28 Oct 2015 07:57:42 +0000 (GMT) Sender: linux-samsung-soc-owner@vger.kernel.org List-Id: linux-samsung-soc@vger.kernel.org To: linux-samsung-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: Kukjin Kim , Krzysztof Kozlowski , Pankaj Dubey This patch extends Exynos SROM controller driver with ability to configure controller outputs and enables SMSC9115 Ethernet chip on SMDK5410 board, which is connected via SROMc bank #3. With this patchset, support for the whole existing SMDK range can be added. Actually, only bank number is different. This patchset also depends on Exynos 5410 pinctrl support, introduced by patches 0003 and 0004 from this set: [PATCH v4 0/5] ARM: EXYNOS: ODROID-XU DT and LEDs http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/330862.html Pinctrl support is necessary in order to correctly configure multifunctional pins of the Exynos chip. v2 => v3: - Fixed up SROMc region size in the device tree - Reordered patches, documentation goes first now v1 => v2: - Fixed some typos and bad labels in device tree - Improved documentation Pavel Fedin (4): Documentation: dt-bindings: Describe SROMc configuration ARM: dts: Add SROMc to Exynos 5410 drivers: exynos-srom: Add support for bank configuration ARM: dts: Add Ethernet chip to SMDK5410 .../bindings/arm/samsung/exynos-srom.txt | 24 ++++++++++++- arch/arm/boot/dts/exynos5410-smdk5410.dts | 42 ++++++++++++++++++++++ arch/arm/boot/dts/exynos5410.dtsi | 5 +++ arch/arm/mach-exynos/Kconfig | 2 +- drivers/soc/samsung/Kconfig | 2 +- drivers/soc/samsung/exynos-srom.c | 42 +++++++++++++++++++++- 6 files changed, 113 insertions(+), 4 deletions(-) -- 2.4.4 From mboxrd@z Thu Jan 1 00:00:00 1970 From: p.fedin@samsung.com (Pavel Fedin) Date: Wed, 28 Oct 2015 10:57:34 +0300 Subject: [PATCH v3 0/4] Exynos SROMc configuration and Ethernet support for SMDK5410 Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch extends Exynos SROM controller driver with ability to configure controller outputs and enables SMSC9115 Ethernet chip on SMDK5410 board, which is connected via SROMc bank #3. With this patchset, support for the whole existing SMDK range can be added. Actually, only bank number is different. This patchset also depends on Exynos 5410 pinctrl support, introduced by patches 0003 and 0004 from this set: [PATCH v4 0/5] ARM: EXYNOS: ODROID-XU DT and LEDs http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/330862.html Pinctrl support is necessary in order to correctly configure multifunctional pins of the Exynos chip. v2 => v3: - Fixed up SROMc region size in the device tree - Reordered patches, documentation goes first now v1 => v2: - Fixed some typos and bad labels in device tree - Improved documentation Pavel Fedin (4): Documentation: dt-bindings: Describe SROMc configuration ARM: dts: Add SROMc to Exynos 5410 drivers: exynos-srom: Add support for bank configuration ARM: dts: Add Ethernet chip to SMDK5410 .../bindings/arm/samsung/exynos-srom.txt | 24 ++++++++++++- arch/arm/boot/dts/exynos5410-smdk5410.dts | 42 ++++++++++++++++++++++ arch/arm/boot/dts/exynos5410.dtsi | 5 +++ arch/arm/mach-exynos/Kconfig | 2 +- drivers/soc/samsung/Kconfig | 2 +- drivers/soc/samsung/exynos-srom.c | 42 +++++++++++++++++++++- 6 files changed, 113 insertions(+), 4 deletions(-) -- 2.4.4