[PATCH v3 0/7] drm/tilcdc Fixes and cleanups

[PATCH v3 0/7] drm/tilcdc Fixes and cleanups

[Jyri Sarha]

Some fixes and cleanups that should get merged to tilcdc even if my
atomic changes are still a work in progress.

Changes since v2:
- "drm/tilcdc: Restore old dpms state in pm_resume()"
  - Improve description
- "drm/tilcdc: Write to LCDC_END_OF_INT_IND_REG at the end of IRQ
  - Handle LCDC_FIFO_UNDERFLOW also for v1 silicon
- "drm/tilcdc: Move waiting of LCDC_FRAME_DONE IRQ into stop()"
  - Improve description
- Add "drm/tilcdc: Increase time out for waiting frame done interrupt"

Changes since first version:
- "drm/tilcdc: Restore old dpms state in pm_resume()"
  - Fix typos from description and subject
- Add "drm/tilcdc: Call drm_crtc_vblank_on() and *_off() in start() and
stop()"

Jyri Sarha (7):
  drm/tilcdc: Restore old dpms state in pm_resume()
  drm/tilcdc: Write to LCDC_END_OF_INT_IND_REG at the end of IRQ
    function
  drm/tilcdc: Move waiting of LCDC_FRAME_DONE IRQ into stop()
  drm/tilcdc: Increase time out for waiting frame done interrupt
  drm/tilcdc: Call drm_crtc_vblank_on() and *_off() in start() and
    stop()
  drm/tilcdc: Refer to panel.txt and tfp410.txt bindings in tilcdc.txt
  drm/tilcdc: Avoid error print by of_graph_get_next_endpoint()

 .../devicetree/bindings/display/tilcdc/tilcdc.txt  |  4 ++
 drivers/gpu/drm/tilcdc/tilcdc_crtc.c               | 66 ++++++++++++++--------
 drivers/gpu/drm/tilcdc/tilcdc_drv.c                |  3 +
 drivers/gpu/drm/tilcdc/tilcdc_drv.h                |  2 +
 drivers/gpu/drm/tilcdc/tilcdc_external.c           | 13 ++++-
 5 files changed, 62 insertions(+), 26 deletions(-)

-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 1/7] drm/tilcdc: Restore old dpms state in pm_resume()

[Jyri Sarha]

Restore old dpms state in pm_resume(). The dpms is turned off in
pm_suspend() and it should be restored to its original state in
pm_resume(). Without this patch the display is left blanked after a
suspend/resume cycle.

Fixes commit 614b3cfeb8d2 ("drm/tilcdc: disable the lcd controller/dma
engine when suspend invoked")

Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
 drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 7 +++++++
 drivers/gpu/drm/tilcdc/tilcdc_drv.c  | 3 +++
 drivers/gpu/drm/tilcdc/tilcdc_drv.h  | 2 ++
 3 files changed, 12 insertions(+)

diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
index 79027b1..4d8f9a5 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
@@ -246,6 +246,13 @@ void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode)
 	}
 }
 
+int tilcdc_crtc_current_dpms_state(struct drm_crtc *crtc)
+{
+	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
+
+	return tilcdc_crtc->dpms;
+}
+
 static bool tilcdc_crtc_mode_fixup(struct drm_crtc *crtc,
 		const struct drm_display_mode *mode,
 		struct drm_display_mode *adjusted_mode)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c
index 308e197..148b1ed 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c
@@ -598,6 +598,7 @@ static int tilcdc_pm_suspend(struct device *dev)
 	}
 
 	/* Disable the LCDC controller, to avoid locking up the PRCM */
+	priv->saved_dpms_state = tilcdc_crtc_current_dpms_state(priv->crtc);
 	tilcdc_crtc_dpms(priv->crtc, DRM_MODE_DPMS_OFF);
 
 	/* Save register state: */
@@ -628,6 +629,8 @@ static int tilcdc_pm_resume(struct device *dev)
 					     priv->saved_register[n++]);
 	}
 
+	tilcdc_crtc_dpms(priv->crtc, priv->saved_dpms_state);
+
 	drm_kms_helper_poll_enable(ddev);
 
 	return 0;
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.h b/drivers/gpu/drm/tilcdc/tilcdc_drv.h
index c1de18b..3b52ce8 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_drv.h
+++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.h
@@ -67,6 +67,7 @@ struct tilcdc_drm_private {
 
 	/* register contents saved across suspend/resume: */
 	u32 *saved_register;
+	int saved_dpms_state;
 	bool ctx_valid;
 
 #ifdef CONFIG_CPU_FREQ
@@ -172,5 +173,6 @@ void tilcdc_crtc_set_simulate_vesa_sync(struct drm_crtc *crtc,
 int tilcdc_crtc_mode_valid(struct drm_crtc *crtc, struct drm_display_mode *mode);
 int tilcdc_crtc_max_width(struct drm_crtc *crtc);
 void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode);
+int tilcdc_crtc_current_dpms_state(struct drm_crtc *crtc);
 
 #endif /* __TILCDC_DRV_H__ */
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 2/7] drm/tilcdc: Write to LCDC_END_OF_INT_IND_REG at the end of IRQ function

[Jyri Sarha]

Reorder the IRQ function so that the write to LCDC_END_OF_INT_IND_REG
is done last. The write to LCDC_END_OF_INT_IND_REG indicates to LCDC
that the interrupt service routine has completed (see section
13.3.6.1.6 in AM335x TRM). This is needed if LCDC's ipgvmodirq module
is configured for pulse interrupts.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
 drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
index 4d8f9a5..7c42475 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
@@ -725,12 +725,17 @@ irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc)
 			tilcdc_crtc->frame_intact = true;
 	}
 
-	if (priv->rev == 2) {
-		if (stat & LCDC_FRAME_DONE) {
-			tilcdc_crtc->frame_done = true;
-			wake_up(&tilcdc_crtc->frame_done_wq);
-		}
-		tilcdc_write(dev, LCDC_END_OF_INT_IND_REG, 0);
+	if (stat & LCDC_FIFO_UNDERFLOW)
+		dev_err_ratelimited(dev->dev, "%s(0x%08x): FIFO underfow",
+				    __func__, stat);
+
+	if (priv->rev == 1)
+		return IRQ_HANDLED;
+	/* The rest is for revision 2 only */
+
+	if (stat & LCDC_FRAME_DONE) {
+		tilcdc_crtc->frame_done = true;
+		wake_up(&tilcdc_crtc->frame_done_wq);
 	}
 
 	if (stat & LCDC_SYNC_LOST) {
@@ -746,9 +751,10 @@ irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc)
 		}
 	}
 
-	if (stat & LCDC_FIFO_UNDERFLOW)
-		dev_err_ratelimited(dev->dev, "%s(0x%08x): FIFO underfow",
-				    __func__, stat);
+	/* Indicate to LCDC that the interrupt service routine has
+	 * completed, see 13.3.6.1.6 in AM335x TRM.
+	 */
+	tilcdc_write(dev, LCDC_END_OF_INT_IND_REG, 0);
 
 	return IRQ_HANDLED;
 }
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 3/7] drm/tilcdc: Move waiting of LCDC_FRAME_DONE IRQ into stop()

[Jyri Sarha]

Move wait queue waiting of LCDC_FRAME_DONE IRQ from tilcdc_crtc_dpms()
into stop() function. This is just a cleanup and enables independent
use of stop() function.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
 drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 31 ++++++++++++++++---------------
 1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
index 7c42475..8e9f168 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
@@ -113,9 +113,25 @@ static void start(struct drm_crtc *crtc)
 
 static void stop(struct drm_crtc *crtc)
 {
+	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 	struct drm_device *dev = crtc->dev;
+	struct tilcdc_drm_private *priv = dev->dev_private;
 
+	tilcdc_crtc->frame_done = false;
 	tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
+
+	/*
+	 * if necessary wait for framedone irq which will still come
+	 * before putting things to sleep..
+	 */
+	if (priv->rev == 2) {
+		int ret = wait_event_timeout(tilcdc_crtc->frame_done_wq,
+					     tilcdc_crtc->frame_done,
+					     msecs_to_jiffies(50));
+		if (ret == 0)
+			dev_err(dev->dev, "%s: timeout waiting for framedone\n",
+				__func__);
+	}
 }
 
 static void tilcdc_crtc_destroy(struct drm_crtc *crtc)
@@ -212,22 +228,7 @@ void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode)
 		pm_runtime_get_sync(dev->dev);
 		start(crtc);
 	} else {
-		tilcdc_crtc->frame_done = false;
 		stop(crtc);
-
-		/*
-		 * if necessary wait for framedone irq which will still come
-		 * before putting things to sleep..
-		 */
-		if (priv->rev == 2) {
-			int ret = wait_event_timeout(
-					tilcdc_crtc->frame_done_wq,
-					tilcdc_crtc->frame_done,
-					msecs_to_jiffies(50));
-			if (ret == 0)
-				dev_err(dev->dev, "timeout waiting for framedone\n");
-		}
-
 		pm_runtime_put_sync(dev->dev);
 
 		if (tilcdc_crtc->next_fb) {
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 4/7] drm/tilcdc: Increase time out for waiting frame done interrupt

[Jyri Sarha]

Increase time out for waiting frame done interrupt. 50ms is long
enough for the usual display modes (50 Hz or higher refresh rate), but
it may be a bit tight for some unusual mode.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
 drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
index 8e9f168..48f890d 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
@@ -127,7 +127,7 @@ static void stop(struct drm_crtc *crtc)
 	if (priv->rev == 2) {
 		int ret = wait_event_timeout(tilcdc_crtc->frame_done_wq,
 					     tilcdc_crtc->frame_done,
-					     msecs_to_jiffies(50));
+					     msecs_to_jiffies(500));
 		if (ret == 0)
 			dev_err(dev->dev, "%s: timeout waiting for framedone\n",
 				__func__);
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 5/7] drm/tilcdc: Call drm_crtc_vblank_on() and *_off() in start() and stop()

[Jyri Sarha]

Add drm_crtc_vblank_on() and *_off() calls to start() and stop()
functions, to make sure any vblank waits etc. gets properly cleaned
up.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
 drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
index 48f890d..b1ba719 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
@@ -109,6 +109,8 @@ static void start(struct drm_crtc *crtc)
 	tilcdc_clear(dev, LCDC_DMA_CTRL_REG, LCDC_DUAL_FRAME_BUFFER_ENABLE);
 	tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_PALETTE_LOAD_MODE(DATA_ONLY));
 	tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
+
+	drm_crtc_vblank_on(crtc);
 }
 
 static void stop(struct drm_crtc *crtc)
@@ -132,6 +134,8 @@ static void stop(struct drm_crtc *crtc)
 			dev_err(dev->dev, "%s: timeout waiting for framedone\n",
 				__func__);
 	}
+
+	drm_crtc_vblank_off(crtc);
 }
 
 static void tilcdc_crtc_destroy(struct drm_crtc *crtc)
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 6/7] drm/tilcdc: Refer to panel.txt and tfp410.txt bindings in tilcdc.txt

[Jyri Sarha]

The legacy panel.txt and tfp410.txt bindings are still the only supported
way to connect lcd panel and tfp410 DVI encoder to tilcdc.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
 Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
index 2136ee8..6efa4c5 100644
--- a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
+++ b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
@@ -24,6 +24,10 @@ Optional nodes:
    binding follows Documentation/devicetree/bindings/graph.txt and
    suppors a single port with a single endpoint.
 
+ - See also Documentation/devicetree/bindings/display/tilcdc/panel.txt and
+   Documentation/devicetree/bindings/display/tilcdc/tfp410.txt for connecting
+   tfp410 DVI encoder or lcd panel to lcdc
+
 Example:
 
 	fb: fb@4830e000 {
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 7/7] drm/tilcdc: Avoid error print by of_graph_get_next_endpoint()

[Jyri Sarha]

Avoid error print by of_graph_get_next_endpoint() if there is no ports
present.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
 drivers/gpu/drm/tilcdc/tilcdc_external.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/tilcdc/tilcdc_external.c b/drivers/gpu/drm/tilcdc/tilcdc_external.c
index 03acb4f..ad3db4d 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_external.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_external.c
@@ -138,12 +138,21 @@ static int dev_match_of(struct device *dev, void *data)
 int tilcdc_get_external_components(struct device *dev,
 				   struct component_match **match)
 {
+	struct device_node *node;
 	struct device_node *ep = NULL;
 	int count = 0;
 
-	while ((ep = of_graph_get_next_endpoint(dev->of_node, ep))) {
-		struct device_node *node;
+	/* Avoid error print by of_graph_get_next_endpoint() if there
+	 * is no ports present.
+	 */
+	node = of_get_child_by_name(dev->of_node, "ports");
+	if (!node)
+		node = of_get_child_by_name(dev->of_node, "port");
+	if (!node)
+		return 0;
+	of_node_put(node);
 
+	while ((ep = of_graph_get_next_endpoint(dev->of_node, ep))) {
 		node = of_graph_get_remote_port_parent(ep);
 		if (!node && !of_device_is_available(node)) {
 			of_node_put(node);
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel