From: Stafford Horne <shorne@gmail.com>
To: openrisc@lists.librecores.org
Subject: [OpenRISC] [PATCH 00/22] Openrisc patchees from backlog for 4.11
Date: Sun, 15 Jan 2017 08:07:57 +0900 [thread overview]
Message-ID: <cover.1484432596.git.shorne@gmail.com> (raw)
Hi All,
This is another set of patches which I have been pulling out of the
openrisc backlogs. Its a bit of a process since I need to cleanup commit
messages, review and test the patches.
The interesting things here are:
- optimized memset and memcpy routines, ~20% boot time saving
- support for cpu idling
- adding support for l.swa and l.lwa atomic operations (in spec from 2014)
- use atomics to implement: bitops, cmpxchg, futex, spinlocks
- the atomics are in preparation for SMP support
Testing:
I have used the kselftests to validate the changes especially the futex
operations with the futex test. Other atomic operations are common so no
explicit testing.
Note for testers:
The l.swa and l.lwa emulation is broken in qemu openrisc port. I have sent
patches [1] to qemu-devel to fix the qemu issues.
[1] lists.nongnu.org/archive/html/qemu-devel/2017-01/msg02764.html
Jonas Bonn (1):
openrisc: use SPARSE_IRQ
Olof Kindgren (1):
openrisc: Add optimized memset
Sebastian Macke (2):
openrisc: Fix the bitmask for the unit present register
openrisc: Initial support for the idle state
Stafford Horne (7):
openrisc: Add optimized memcpy routine
openrisc: Add .gitignore
MAINTAINERS: Add the openrisc official repository
scripts/checkstack.pl: Add openrisc support
openrisc: entry: Whitespace and comment cleanups
openrisc: entry: Fix delay slot detection
openrisc: head: Move init strings to rodata section
Stefan Kristiansson (11):
openrisc: add cache way information to cpuinfo
openrisc: tlb miss handler optimizations
openrisc: head: use THREAD_SIZE instead of magic constant
openrisc: head: refactor out tlb flush into it's own function
openrisc: add l.lwa/l.swa emulation
openrisc: add atomic bitops
openrisc: add cmpxchg and xchg implementations
openrisc: add optimized atomic operations
openrisc: add spinlock implementation
openrisc: add futex_atomic_* implementations
openrisc: remove unnecessary stddef.h include
MAINTAINERS | 1 +
arch/openrisc/Kconfig | 1 +
arch/openrisc/TODO.openrisc | 1 -
arch/openrisc/include/asm/Kbuild | 5 +-
arch/openrisc/include/asm/atomic.h | 53 +++++++
arch/openrisc/include/asm/bitops.h | 2 +-
arch/openrisc/include/asm/bitops/atomic.h | 103 +++++++++++++
arch/openrisc/include/asm/cmpxchg.h | 82 ++++++++++
arch/openrisc/include/asm/cpuinfo.h | 2 +
arch/openrisc/include/asm/futex.h | 135 +++++++++++++++++
arch/openrisc/include/asm/spinlock.h | 232 ++++++++++++++++++++++++++++-
arch/openrisc/include/asm/spinlock_types.h | 28 ++++
arch/openrisc/include/asm/spr_defs.h | 4 +-
arch/openrisc/include/asm/string.h | 10 ++
arch/openrisc/kernel/.gitignore | 1 +
arch/openrisc/kernel/entry.S | 60 +++++---
arch/openrisc/kernel/head.S | 195 +++++++++---------------
arch/openrisc/kernel/or32_ksyms.c | 1 +
arch/openrisc/kernel/process.c | 17 +++
arch/openrisc/kernel/ptrace.c | 1 -
arch/openrisc/kernel/setup.c | 67 +++++----
arch/openrisc/kernel/traps.c | 183 +++++++++++++++++++++++
arch/openrisc/lib/Makefile | 2 +-
arch/openrisc/lib/memcpy.c | 124 +++++++++++++++
arch/openrisc/lib/memset.S | 98 ++++++++++++
scripts/checkstack.pl | 3 +
26 files changed, 1224 insertions(+), 187 deletions(-)
create mode 100644 arch/openrisc/include/asm/atomic.h
create mode 100644 arch/openrisc/include/asm/bitops/atomic.h
create mode 100644 arch/openrisc/include/asm/cmpxchg.h
create mode 100644 arch/openrisc/include/asm/futex.h
create mode 100644 arch/openrisc/include/asm/spinlock_types.h
create mode 100644 arch/openrisc/include/asm/string.h
create mode 100644 arch/openrisc/kernel/.gitignore
create mode 100644 arch/openrisc/lib/memcpy.c
create mode 100644 arch/openrisc/lib/memset.S
--
2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: Stafford Horne <shorne@gmail.com>
To: Jonas Bonn <jonas@southpole.se>,
Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: linux@roeck-us.net, openrisc@lists.librecores.org,
linux-kernel@vger.kernel.org, Stafford Horne <shorne@gmail.com>
Subject: [PATCH 00/22] Openrisc patchees from backlog for 4.11
Date: Sun, 15 Jan 2017 08:07:57 +0900 [thread overview]
Message-ID: <cover.1484432596.git.shorne@gmail.com> (raw)
Hi All,
This is another set of patches which I have been pulling out of the
openrisc backlogs. Its a bit of a process since I need to cleanup commit
messages, review and test the patches.
The interesting things here are:
- optimized memset and memcpy routines, ~20% boot time saving
- support for cpu idling
- adding support for l.swa and l.lwa atomic operations (in spec from 2014)
- use atomics to implement: bitops, cmpxchg, futex, spinlocks
- the atomics are in preparation for SMP support
Testing:
I have used the kselftests to validate the changes especially the futex
operations with the futex test. Other atomic operations are common so no
explicit testing.
Note for testers:
The l.swa and l.lwa emulation is broken in qemu openrisc port. I have sent
patches [1] to qemu-devel to fix the qemu issues.
[1] lists.nongnu.org/archive/html/qemu-devel/2017-01/msg02764.html
Jonas Bonn (1):
openrisc: use SPARSE_IRQ
Olof Kindgren (1):
openrisc: Add optimized memset
Sebastian Macke (2):
openrisc: Fix the bitmask for the unit present register
openrisc: Initial support for the idle state
Stafford Horne (7):
openrisc: Add optimized memcpy routine
openrisc: Add .gitignore
MAINTAINERS: Add the openrisc official repository
scripts/checkstack.pl: Add openrisc support
openrisc: entry: Whitespace and comment cleanups
openrisc: entry: Fix delay slot detection
openrisc: head: Move init strings to rodata section
Stefan Kristiansson (11):
openrisc: add cache way information to cpuinfo
openrisc: tlb miss handler optimizations
openrisc: head: use THREAD_SIZE instead of magic constant
openrisc: head: refactor out tlb flush into it's own function
openrisc: add l.lwa/l.swa emulation
openrisc: add atomic bitops
openrisc: add cmpxchg and xchg implementations
openrisc: add optimized atomic operations
openrisc: add spinlock implementation
openrisc: add futex_atomic_* implementations
openrisc: remove unnecessary stddef.h include
MAINTAINERS | 1 +
arch/openrisc/Kconfig | 1 +
arch/openrisc/TODO.openrisc | 1 -
arch/openrisc/include/asm/Kbuild | 5 +-
arch/openrisc/include/asm/atomic.h | 53 +++++++
arch/openrisc/include/asm/bitops.h | 2 +-
arch/openrisc/include/asm/bitops/atomic.h | 103 +++++++++++++
arch/openrisc/include/asm/cmpxchg.h | 82 ++++++++++
arch/openrisc/include/asm/cpuinfo.h | 2 +
arch/openrisc/include/asm/futex.h | 135 +++++++++++++++++
arch/openrisc/include/asm/spinlock.h | 232 ++++++++++++++++++++++++++++-
arch/openrisc/include/asm/spinlock_types.h | 28 ++++
arch/openrisc/include/asm/spr_defs.h | 4 +-
arch/openrisc/include/asm/string.h | 10 ++
arch/openrisc/kernel/.gitignore | 1 +
arch/openrisc/kernel/entry.S | 60 +++++---
arch/openrisc/kernel/head.S | 195 +++++++++---------------
arch/openrisc/kernel/or32_ksyms.c | 1 +
arch/openrisc/kernel/process.c | 17 +++
arch/openrisc/kernel/ptrace.c | 1 -
arch/openrisc/kernel/setup.c | 67 +++++----
arch/openrisc/kernel/traps.c | 183 +++++++++++++++++++++++
arch/openrisc/lib/Makefile | 2 +-
arch/openrisc/lib/memcpy.c | 124 +++++++++++++++
arch/openrisc/lib/memset.S | 98 ++++++++++++
scripts/checkstack.pl | 3 +
26 files changed, 1224 insertions(+), 187 deletions(-)
create mode 100644 arch/openrisc/include/asm/atomic.h
create mode 100644 arch/openrisc/include/asm/bitops/atomic.h
create mode 100644 arch/openrisc/include/asm/cmpxchg.h
create mode 100644 arch/openrisc/include/asm/futex.h
create mode 100644 arch/openrisc/include/asm/spinlock_types.h
create mode 100644 arch/openrisc/include/asm/string.h
create mode 100644 arch/openrisc/kernel/.gitignore
create mode 100644 arch/openrisc/lib/memcpy.c
create mode 100644 arch/openrisc/lib/memset.S
--
2.9.3
next reply other threads:[~2017-01-14 23:07 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-14 23:07 Stafford Horne [this message]
2017-01-14 23:07 ` [PATCH 00/22] Openrisc patchees from backlog for 4.11 Stafford Horne
2017-01-14 23:07 ` [OpenRISC] [PATCH 01/22] openrisc: use SPARSE_IRQ Stafford Horne
2017-01-14 23:07 ` Stafford Horne
2017-01-14 23:07 ` [OpenRISC] [PATCH 02/22] openrisc: add cache way information to cpuinfo Stafford Horne
2017-01-14 23:07 ` Stafford Horne
2017-01-14 23:08 ` [OpenRISC] [PATCH 03/22] openrisc: tlb miss handler optimizations Stafford Horne
2017-01-14 23:08 ` Stafford Horne
2017-01-14 23:08 ` [OpenRISC] [PATCH 04/22] openrisc: head: use THREAD_SIZE instead of magic constant Stafford Horne
2017-01-14 23:08 ` Stafford Horne
2017-01-14 23:08 ` [OpenRISC] [PATCH 05/22] openrisc: head: refactor out tlb flush into it's own function Stafford Horne
2017-01-14 23:08 ` Stafford Horne
2017-01-14 23:08 ` [OpenRISC] [PATCH 06/22] openrisc: add l.lwa/l.swa emulation Stafford Horne
2017-01-14 23:08 ` Stafford Horne
2017-01-14 23:08 ` [OpenRISC] [PATCH 07/22] openrisc: add atomic bitops Stafford Horne
2017-01-14 23:08 ` Stafford Horne
2017-01-15 5:42 ` [OpenRISC] " kbuild test robot
2017-01-15 5:42 ` kbuild test robot
2017-01-15 8:29 ` [OpenRISC] " Stafford Horne
2017-01-15 8:29 ` Stafford Horne
2017-01-14 23:08 ` [OpenRISC] [PATCH 08/22] openrisc: add cmpxchg and xchg implementations Stafford Horne
2017-01-14 23:08 ` Stafford Horne
2017-01-14 23:08 ` [OpenRISC] [PATCH 09/22] openrisc: add optimized atomic operations Stafford Horne
2017-01-14 23:08 ` Stafford Horne
2017-01-14 23:08 ` [OpenRISC] [PATCH 10/22] openrisc: add spinlock implementation Stafford Horne
2017-01-14 23:08 ` Stafford Horne
2017-01-14 23:08 ` [OpenRISC] [PATCH 11/22] openrisc: add futex_atomic_* implementations Stafford Horne
2017-01-14 23:08 ` Stafford Horne
2017-01-14 23:08 ` [OpenRISC] [PATCH 12/22] openrisc: remove unnecessary stddef.h include Stafford Horne
2017-01-14 23:08 ` Stafford Horne
2017-01-14 23:08 ` [OpenRISC] [PATCH 13/22] openrisc: Fix the bitmask for the unit present register Stafford Horne
2017-01-14 23:08 ` Stafford Horne
2017-01-14 23:08 ` [OpenRISC] [PATCH 14/22] openrisc: Initial support for the idle state Stafford Horne
2017-01-14 23:08 ` Stafford Horne
2017-01-14 23:08 ` [OpenRISC] [PATCH 15/22] openrisc: Add optimized memset Stafford Horne
2017-01-14 23:08 ` Stafford Horne
2017-01-14 23:08 ` [OpenRISC] [PATCH 16/22] openrisc: Add optimized memcpy routine Stafford Horne
2017-01-14 23:08 ` Stafford Horne
2017-01-14 23:08 ` [OpenRISC] [PATCH 17/22] openrisc: Add .gitignore Stafford Horne
2017-01-14 23:08 ` Stafford Horne
2017-01-14 23:08 ` [OpenRISC] [PATCH 18/22] MAINTAINERS: Add the openrisc official repository Stafford Horne
2017-01-14 23:08 ` Stafford Horne
2017-01-14 23:08 ` [OpenRISC] [PATCH 19/22] scripts/checkstack.pl: Add openrisc support Stafford Horne
2017-01-14 23:08 ` Stafford Horne
2017-01-14 23:08 ` [OpenRISC] [PATCH 20/22] openrisc: entry: Whitespace and comment cleanups Stafford Horne
2017-01-14 23:08 ` Stafford Horne
2017-01-14 23:08 ` [OpenRISC] [PATCH 21/22] openrisc: entry: Fix delay slot detection Stafford Horne
2017-01-14 23:08 ` Stafford Horne
2017-01-14 23:08 ` [OpenRISC] [PATCH 22/22] openrisc: head: Move init strings to rodata section Stafford Horne
2017-01-14 23:08 ` Stafford Horne
2017-01-15 5:17 ` [OpenRISC] [PATCH 00/22] Openrisc patchees from backlog for 4.11 Guenter Roeck
2017-01-15 5:17 ` Guenter Roeck
2017-01-15 8:36 ` [OpenRISC] " Stafford Horne
2017-01-15 8:36 ` Stafford Horne
2017-01-16 11:58 ` [OpenRISC] " Stafford Horne
2017-01-16 11:58 ` Stafford Horne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1484432596.git.shorne@gmail.com \
--to=shorne@gmail.com \
--cc=openrisc@lists.librecores.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.