From: Sean Young <sean@mess.org>
To: linux-media@vger.kernel.org
Subject: [PATCH 0/4] Generic Raspberry Pi IR transmitters
Date: Sun, 2 Jul 2017 12:06:07 +0100 [thread overview]
Message-ID: <cover.1498992850.git.sean@mess.org> (raw)
These drivers are generic, but they've been tested on Raspberry Pi.
Note that the gpio-ir-recv is a separate driver, so you will end up
with two /dev/lircN devices if you want a receiver and a transmitter,
whilst with the lirc_rpi driver you have one /dev/lircN device. I'm
not sure this is either a problem or how it could be solved.
With this in place, there is no reason to use the lirc_rpi any more.
Also note that it might be possible for the Nokia N900 to use the
pwm-ir-tx driver, making ir-rx51 obsolete. The pwm-ir-tx driver is
shorter and simpler.
Sean Young (4):
[media] rc-core: rename input_name to device_name
[media] rc: mce kbd decoder not needed for IR TX drivers
[media] rc: gpio-ir-tx: add new driver
[media] rc: pwm-ir-tx: add new driver
.../devicetree/bindings/leds/irled/gpio-ir-tx.txt | 11 ++
.../devicetree/bindings/leds/irled/pwm-ir-tx.txt | 13 ++
drivers/media/cec/cec-core.c | 4 +-
drivers/media/common/siano/smsir.c | 4 +-
drivers/media/i2c/ir-kbd-i2c.c | 2 +-
drivers/media/pci/bt8xx/bttv-input.c | 2 +-
drivers/media/pci/cx23885/cx23885-input.c | 2 +-
drivers/media/pci/cx88/cx88-input.c | 2 +-
drivers/media/pci/dm1105/dm1105.c | 2 +-
drivers/media/pci/mantis/mantis_common.h | 2 +-
drivers/media/pci/mantis/mantis_input.c | 4 +-
drivers/media/pci/saa7134/saa7134-input.c | 2 +-
drivers/media/pci/smipcie/smipcie-ir.c | 4 +-
drivers/media/pci/smipcie/smipcie.h | 2 +-
drivers/media/pci/ttpci/budget-ci.c | 2 +-
drivers/media/rc/Kconfig | 23 +++
drivers/media/rc/Makefile | 2 +
drivers/media/rc/ati_remote.c | 2 +-
drivers/media/rc/ene_ir.c | 4 +-
drivers/media/rc/fintek-cir.c | 2 +-
drivers/media/rc/gpio-ir-recv.c | 2 +-
drivers/media/rc/gpio-ir-tx.c | 189 +++++++++++++++++++++
drivers/media/rc/igorplugusb.c | 2 +-
drivers/media/rc/iguanair.c | 2 +-
drivers/media/rc/img-ir/img-ir-hw.c | 2 +-
drivers/media/rc/img-ir/img-ir-raw.c | 2 +-
drivers/media/rc/imon.c | 2 +-
drivers/media/rc/ir-hix5hd2.c | 2 +-
drivers/media/rc/ir-mce_kbd-decoder.c | 3 +
drivers/media/rc/ir-spi.c | 1 +
drivers/media/rc/ite-cir.c | 2 +-
drivers/media/rc/mceusb.c | 2 +-
drivers/media/rc/meson-ir.c | 2 +-
drivers/media/rc/mtk-cir.c | 2 +-
drivers/media/rc/nuvoton-cir.c | 2 +-
drivers/media/rc/pwm-ir-tx.c | 165 ++++++++++++++++++
drivers/media/rc/rc-loopback.c | 2 +-
drivers/media/rc/rc-main.c | 8 +-
drivers/media/rc/redrat3.c | 2 +-
drivers/media/rc/serial_ir.c | 10 +-
drivers/media/rc/sir_ir.c | 2 +-
drivers/media/rc/st_rc.c | 2 +-
drivers/media/rc/streamzap.c | 2 +-
drivers/media/rc/sunxi-cir.c | 2 +-
drivers/media/rc/ttusbir.c | 2 +-
drivers/media/rc/winbond-cir.c | 2 +-
drivers/media/usb/au0828/au0828-input.c | 2 +-
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c | 5 +-
drivers/media/usb/dvb-usb/dvb-usb-remote.c | 2 +-
drivers/media/usb/em28xx/em28xx-input.c | 2 +-
drivers/media/usb/tm6000/tm6000-input.c | 2 +-
include/media/cec.h | 2 +-
include/media/rc-core.h | 6 +-
53 files changed, 467 insertions(+), 61 deletions(-)
create mode 100644 Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt
create mode 100644 Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt
create mode 100644 drivers/media/rc/gpio-ir-tx.c
create mode 100644 drivers/media/rc/pwm-ir-tx.c
--
2.9.4
next reply other threads:[~2017-07-02 11:06 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-02 11:06 Sean Young [this message]
2017-07-02 11:06 ` [PATCH 1/4] [media] rc-core: rename input_name to device_name Sean Young
2017-07-02 11:06 ` [PATCH 2/4] [media] rc: mce kbd decoder not needed for IR TX drivers Sean Young
2017-07-02 11:06 ` [PATCH 3/4] [media] rc: gpio-ir-tx: add new driver Sean Young
2017-07-07 13:58 ` Rob Herring
2017-07-02 11:06 ` [PATCH 4/4] [media] rc: pwm-ir-tx: " Sean Young
[not found] ` <88fa0219db3388fad7bcc7b20cf30dd41e763aee.1498992850.git.sean-hENCXIMQXOg@public.gmane.org>
2017-07-04 12:58 ` Sean Young
2017-07-04 12:58 ` Sean Young
2017-07-07 13:59 ` Rob Herring
2017-07-07 13:59 ` Rob Herring
2017-07-07 16:15 ` Pavel Machek
2017-07-10 15:12 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1498992850.git.sean@mess.org \
--to=sean@mess.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.