[Qemu-devel] [PATCH v3 0/2] Sam460ex emulation

All of lore.kernel.org
 help / color / mirror / Atom feed

* [Qemu-devel] [PATCH v3 0/2] Sam460ex emulation
@ 2018-02-19 10:34 BALATON Zoltan
  2018-02-19 10:34 ` [Qemu-devel] [PATCH v3 2/2] ppc: Add aCube Sam460ex board BALATON Zoltan
  2018-02-19 10:34 ` [Qemu-devel] [PATCH v3 1/2] ppc440: Add emulation of plb-pcix controller found in some 440 SoCs BALATON Zoltan
  0 siblings, 2 replies; 9+ messages in thread
From: BALATON Zoltan @ 2018-02-19 10:34 UTC (permalink / raw)
  To: qemu-devel, qemu-ppc; +Cc: Alexander Graf, David Gibson, Francois Revol

This is just resending the two remaining patches (2/3 from v2 and v3
of 3/3 of previous series as a new series to have them at one place).

BALATON Zoltan (2):
  ppc440: Add emulation of plb-pcix controller found in some 440 SoCs
  ppc: Add aCube Sam460ex board

 Makefile                           |   2 +-
 default-configs/ppc-softmmu.mak    |   2 +
 default-configs/ppcemb-softmmu.mak |   1 +
 hw/ppc/Makefile.objs               |   3 +-
 hw/ppc/ppc440_pcix.c               | 528 ++++++++++++++++++++++++++++++++
 hw/ppc/sam460ex.c                  | 603 +++++++++++++++++++++++++++++++++++++
 hw/ppc/trace-events                |   8 +
 pc-bios/canyonlands.dtb            | Bin 0 -> 9779 bytes
 pc-bios/canyonlands.dts            | 566 ++++++++++++++++++++++++++++++++++
 9 files changed, 1711 insertions(+), 2 deletions(-)
 create mode 100644 hw/ppc/ppc440_pcix.c
 create mode 100644 hw/ppc/sam460ex.c
 create mode 100644 pc-bios/canyonlands.dtb
 create mode 100644 pc-bios/canyonlands.dts

-- 
2.7.6

^ permalink raw reply	[flat|nested] 9+ messages in thread

* [Qemu-devel] [PATCH v3 2/2] ppc: Add aCube Sam460ex board
  2018-02-19 10:34 [Qemu-devel] [PATCH v3 0/2] Sam460ex emulation BALATON Zoltan
@ 2018-02-19 10:34 ` BALATON Zoltan
  2018-02-20  2:40   ` David Gibson
  2018-02-19 10:34 ` [Qemu-devel] [PATCH v3 1/2] ppc440: Add emulation of plb-pcix controller found in some 440 SoCs BALATON Zoltan
  1 sibling, 1 reply; 9+ messages in thread
From: BALATON Zoltan @ 2018-02-19 10:34 UTC (permalink / raw)
  To: qemu-devel, qemu-ppc; +Cc: Alexander Graf, David Gibson, Francois Revol

Add emulation of aCube Sam460ex board based on AMCC 460EX embedded SoC.
This is not a complete implementation yet with a lot of components
still missing but enough for the U-Boot firmware to start and to boot
a Linux kernel or AROS.

Signed-off-by: François Revol <revol@free.fr>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
---
v3:
- Added device tree source and blob
- Fixed clock frequency in device tree
    
v2:
- Rebased to latest changes on master
- Replaced printfs with error_report

 Makefile                           |   2 +-
 default-configs/ppc-softmmu.mak    |   2 +
 default-configs/ppcemb-softmmu.mak |   1 +
 hw/ppc/Makefile.objs               |   3 +-
 hw/ppc/sam460ex.c                  | 603 +++++++++++++++++++++++++++++++++++++
 pc-bios/canyonlands.dtb            | Bin 0 -> 9779 bytes
 pc-bios/canyonlands.dts            | 566 ++++++++++++++++++++++++++++++++++
 7 files changed, 1175 insertions(+), 2 deletions(-)
 create mode 100644 hw/ppc/sam460ex.c
 create mode 100644 pc-bios/canyonlands.dtb
 create mode 100644 pc-bios/canyonlands.dts

diff --git a/Makefile b/Makefile
index 90e05ac..6434d6c 100644
--- a/Makefile
+++ b/Makefile
@@ -656,7 +656,7 @@ efi-e1000.rom efi-eepro100.rom efi-ne2k_pci.rom \
 efi-pcnet.rom efi-rtl8139.rom efi-virtio.rom \
 efi-e1000e.rom efi-vmxnet3.rom \
 qemu-icon.bmp qemu_logo_no_text.svg \
-bamboo.dtb petalogix-s3adsp1800.dtb petalogix-ml605.dtb \
+bamboo.dtb canyonlands.dtb petalogix-s3adsp1800.dtb petalogix-ml605.dtb \
 multiboot.bin linuxboot.bin linuxboot_dma.bin kvmvapic.bin \
 s390-ccw.img s390-netboot.img \
 spapr-rtas.bin slof.bin skiboot.lid \
diff --git a/default-configs/ppc-softmmu.mak b/default-configs/ppc-softmmu.mak
index 76e29cf..4d7be45 100644
--- a/default-configs/ppc-softmmu.mak
+++ b/default-configs/ppc-softmmu.mak
@@ -21,6 +21,8 @@ CONFIG_E500=y
 CONFIG_OPENPIC_KVM=$(call land,$(CONFIG_E500),$(CONFIG_KVM))
 CONFIG_PLATFORM_BUS=y
 CONFIG_ETSEC=y
+# For Sam460ex
+CONFIG_USB_EHCI_SYSBUS=y
 CONFIG_SM501=y
 CONFIG_IDE_SII3112=y
 CONFIG_I2C=y
diff --git a/default-configs/ppcemb-softmmu.mak b/default-configs/ppcemb-softmmu.mak
index bc5e1b3..67d18b2 100644
--- a/default-configs/ppcemb-softmmu.mak
+++ b/default-configs/ppcemb-softmmu.mak
@@ -15,6 +15,7 @@ CONFIG_PTIMER=y
 CONFIG_I8259=y
 CONFIG_XILINX=y
 CONFIG_XILINX_ETHLITE=y
+CONFIG_USB_EHCI_SYSBUS=y
 CONFIG_SM501=y
 CONFIG_IDE_SII3112=y
 CONFIG_I2C=y
diff --git a/hw/ppc/Makefile.objs b/hw/ppc/Makefile.objs
index bddc742..86d82a6 100644
--- a/hw/ppc/Makefile.objs
+++ b/hw/ppc/Makefile.objs
@@ -13,7 +13,8 @@ endif
 obj-$(CONFIG_PSERIES) += spapr_rtas_ddw.o
 # PowerPC 4xx boards
 obj-y += ppc4xx_devs.o ppc405_uc.o
-obj-$(CONFIG_PPC4XX) += ppc4xx_pci.o ppc405_boards.o ppc440_bamboo.o ppc440_pcix.o
+obj-$(CONFIG_PPC4XX) += ppc4xx_pci.o ppc405_boards.o
+obj-$(CONFIG_PPC4XX) += ppc440_bamboo.o ppc440_pcix.o ppc440_uc.o sam460ex.o
 # PReP
 obj-$(CONFIG_PREP) += prep.o
 obj-$(CONFIG_PREP) += prep_systemio.o
diff --git a/hw/ppc/sam460ex.c b/hw/ppc/sam460ex.c
new file mode 100644
index 0000000..70b8e76
--- /dev/null
+++ b/hw/ppc/sam460ex.c
@@ -0,0 +1,603 @@
+/*
+ * QEMU aCube Sam460ex board emulation
+ *
+ * Copyright (c) 2012 François Revol
+ * Copyright (c) 2016-2018 BALATON Zoltan
+ *
+ * This file is derived from hw/ppc440_bamboo.c,
+ * the copyright for that material belongs to the original owners.
+ *
+ * This work is licensed under the GNU GPL license version 2 or later.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+#include "qemu/cutils.h"
+#include "qemu/error-report.h"
+#include "qapi/error.h"
+#include "hw/hw.h"
+#include "sysemu/blockdev.h"
+#include "hw/boards.h"
+#include "sysemu/kvm.h"
+#include "kvm_ppc.h"
+#include "sysemu/device_tree.h"
+#include "sysemu/block-backend.h"
+#include "hw/loader.h"
+#include "elf.h"
+#include "exec/address-spaces.h"
+#include "exec/memory.h"
+#include "hw/ppc/ppc440.h"
+#include "hw/ppc/ppc405.h"
+#include "hw/block/flash.h"
+#include "sysemu/sysemu.h"
+#include "sysemu/qtest.h"
+#include "hw/sysbus.h"
+#include "hw/char/serial.h"
+#include "hw/i2c/ppc4xx_i2c.h"
+#include "hw/i2c/smbus.h"
+#include "hw/usb/hcd-ehci.h"
+
+#define BINARY_DEVICE_TREE_FILE "canyonlands.dtb"
+#define UBOOT_FILENAME "u-boot-sam460-20100605.bin"
+/* to extract the official U-Boot bin from the updater: */
+/* dd bs=1 skip=$(($(stat -c '%s' updater/updater-460) - 0x80000)) \
+     if=updater/updater-460 of=u-boot-sam460-20100605.bin */
+
+/* from Sam460 U-Boot include/configs/Sam460ex.h */
+#define FLASH_BASE             0xfff00000
+#define FLASH_BASE_H           0x4
+#define FLASH_SIZE             (1 << 20)
+#define UBOOT_LOAD_BASE        0xfff80000
+#define UBOOT_SIZE             0x00080000
+#define UBOOT_ENTRY            0xfffffffc
+
+/* from U-Boot */
+#define EPAPR_MAGIC           (0x45504150)
+#define KERNEL_ADDR           0x1000000
+#define FDT_ADDR              0x1800000
+#define RAMDISK_ADDR          0x1900000
+
+/* Sam460ex IRQ MAP:
+   IRQ0  = ETH_INT
+   IRQ1  = FPGA_INT
+   IRQ2  = PCI_INT (PCIA, PCIB, PCIC, PCIB)
+   IRQ3  = FPGA_INT2
+   IRQ11 = RTC_INT
+   IRQ12 = SM502_INT
+*/
+
+#define SDRAM_NR_BANKS 4
+
+/* FIXME: See u-boot.git 8ac41e, also fix in ppc440_uc.c */
+static const unsigned int ppc460ex_sdram_bank_sizes[] = {
+    1024 << 20, 512 << 20, 256 << 20, 128 << 20, 64 << 20, 32 << 20, 0
+};
+
+struct boot_info {
+    uint32_t dt_base;
+    uint32_t dt_size;
+    uint32_t entry;
+};
+
+/*****************************************************************************/
+/* SPD eeprom content from mips_malta.c */
+
+struct _eeprom24c0x_t {
+  uint8_t tick;
+  uint8_t address;
+  uint8_t command;
+  uint8_t ack;
+  uint8_t scl;
+  uint8_t sda;
+  uint8_t data;
+  uint8_t contents[256];
+};
+
+typedef struct _eeprom24c0x_t eeprom24c0x_t;
+
+static eeprom24c0x_t spd_eeprom = {
+    .contents = {
+        /* 00000000: */ 0x80, 0x08, 0xFF, 0x0D, 0x0A, 0xFF, 0x40, 0x00,
+        /* 00000008: */ 0x04, 0x75, 0x54, 0x00, 0x82, 0x08, 0x00, 0x01,
+        /* 00000010: */ 0x8F, 0x04, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00,
+        /* 00000018: */ 0x00, 0x00, 0x00, 0x14, 0x0F, 0x14, 0x2D, 0xFF,
+        /* 00000020: */ 0x15, 0x08, 0x15, 0x08, 0x00, 0x00, 0x00, 0x00,
+        /* 00000028: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        /* 00000030: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        /* 00000038: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x12, 0xD0,
+        /* 00000040: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        /* 00000048: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        /* 00000050: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        /* 00000058: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        /* 00000060: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        /* 00000068: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        /* 00000070: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        /* 00000078: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x64, 0xF4,
+    },
+};
+
+static void generate_eeprom_spd(uint8_t *eeprom, ram_addr_t ram_size)
+{
+    enum { SDR = 0x4, DDR1 = 0x7, DDR2 = 0x8 } type;
+    uint8_t *spd = spd_eeprom.contents;
+    uint8_t nbanks = 0;
+    uint16_t density = 0;
+    int i;
+
+    /* work in terms of MB */
+    ram_size >>= 20;
+
+    while ((ram_size >= 4) && (nbanks <= 2)) {
+        int sz_log2 = MIN(31 - clz32(ram_size), 14);
+        nbanks++;
+        density |= 1 << (sz_log2 - 2);
+        ram_size -= 1 << sz_log2;
+    }
+
+    /* split to 2 banks if possible */
+    if ((nbanks == 1) && (density > 1)) {
+        nbanks++;
+        density >>= 1;
+    }
+
+    if (density & 0xff00) {
+        density = (density & 0xe0) | ((density >> 8) & 0x1f);
+        type = DDR2;
+    } else if (!(density & 0x1f)) {
+        type = DDR2;
+    } else {
+        type = SDR;
+    }
+
+    if (ram_size) {
+        warn_report("SPD cannot represent final " RAM_ADDR_FMT "MB"
+                    " of SDRAM", ram_size);
+    }
+
+    /* fill in SPD memory information */
+    spd[2] = type;
+    spd[5] = nbanks;
+    spd[31] = density;
+
+    /* XXX: this is totally random */
+    spd[9] = 0x10; /* CAS tcyc */
+    spd[18] = 0x20; /* CAS bit */
+    spd[23] = 0x10; /* CAS tcyc */
+    spd[25] = 0x10; /* CAS tcyc */
+
+    /* checksum */
+    spd[63] = 0;
+    for (i = 0; i < 63; i++) {
+        spd[63] += spd[i];
+    }
+
+    /* copy for SMBUS */
+    memcpy(eeprom, spd, sizeof(spd_eeprom.contents));
+}
+
+static void generate_eeprom_serial(uint8_t *eeprom)
+{
+    int i, pos = 0;
+    uint8_t mac[6] = { 0x00 };
+    uint8_t sn[5] = { 0x01, 0x23, 0x45, 0x67, 0x89 };
+
+    /* version */
+    eeprom[pos++] = 0x01;
+
+    /* count */
+    eeprom[pos++] = 0x02;
+
+    /* MAC address */
+    eeprom[pos++] = 0x01; /* MAC */
+    eeprom[pos++] = 0x06; /* length */
+    memcpy(&eeprom[pos], mac, sizeof(mac));
+    pos += sizeof(mac);
+
+    /* serial number */
+    eeprom[pos++] = 0x02; /* serial */
+    eeprom[pos++] = 0x05; /* length */
+    memcpy(&eeprom[pos], sn, sizeof(sn));
+    pos += sizeof(sn);
+
+    /* checksum */
+    eeprom[pos] = 0;
+    for (i = 0; i < pos; i++) {
+        eeprom[pos] += eeprom[i];
+    }
+}
+
+/*****************************************************************************/
+
+static int sam460ex_load_uboot(void)
+{
+    DriveInfo *dinfo;
+    BlockBackend *blk = NULL;
+    hwaddr base = FLASH_BASE | ((hwaddr)FLASH_BASE_H << 32);
+    long bios_size = FLASH_SIZE;
+    int fl_sectors;
+
+    dinfo = drive_get(IF_PFLASH, 0, 0);
+    if (dinfo) {
+        blk = blk_by_legacy_dinfo(dinfo);
+        bios_size = blk_getlength(blk);
+    }
+    fl_sectors = (bios_size + 65535) >> 16;
+
+    if (!pflash_cfi01_register(base, NULL, "sam460ex.flash", bios_size,
+                               blk, (64 * 1024), fl_sectors,
+                               1, 0x89, 0x18, 0x0000, 0x0, 1)) {
+        error_report("qemu: Error registering flash memory.");
+        /* XXX: return an error instead? */
+        exit(1);
+    }
+
+    if (!blk) {
+        /*error_report("No flash image given with the 'pflash' parameter,"
+                " using default u-boot image");*/
+        base = UBOOT_LOAD_BASE | ((hwaddr)FLASH_BASE_H << 32);
+        rom_add_file_fixed(UBOOT_FILENAME, base, -1);
+    }
+
+    return 0;
+}
+
+static int sam460ex_load_device_tree(hwaddr addr,
+                                     uint32_t ramsize,
+                                     hwaddr initrd_base,
+                                     hwaddr initrd_size,
+                                     const char *kernel_cmdline)
+{
+    int ret = -1;
+    uint32_t mem_reg_property[] = { 0, 0, cpu_to_be32(ramsize) };
+    char *filename;
+    int fdt_size;
+    void *fdt;
+    uint32_t tb_freq = 50000000;
+    uint32_t clock_freq = 50000000;
+
+    filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, BINARY_DEVICE_TREE_FILE);
+    if (!filename) {
+        goto out;
+    }
+    fdt = load_device_tree(filename, &fdt_size);
+    g_free(filename);
+    if (fdt == NULL) {
+        goto out;
+    }
+
+    /* Manipulate device tree in memory. */
+
+    ret = qemu_fdt_setprop(fdt, "/memory", "reg", mem_reg_property,
+                               sizeof(mem_reg_property));
+    if (ret < 0) {
+        error_report("couldn't set /memory/reg");
+    }
+
+    /* default FDT doesn't have a /chosen node... */
+    qemu_fdt_add_subnode(fdt, "/chosen");
+
+    ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start",
+                                    initrd_base);
+    if (ret < 0) {
+        error_report("couldn't set /chosen/linux,initrd-start");
+    }
+
+    ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end",
+                                    (initrd_base + initrd_size));
+    if (ret < 0) {
+        error_report("couldn't set /chosen/linux,initrd-end");
+    }
+
+    ret = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs",
+                                      kernel_cmdline);
+    if (ret < 0) {
+        error_report("couldn't set /chosen/bootargs");
+    }
+
+    /* Copy data from the host device tree into the guest. Since the guest can
+     * directly access the timebase without host involvement, we must expose
+     * the correct frequencies. */
+    if (kvm_enabled()) {
+        tb_freq = kvmppc_get_tbfreq();
+        clock_freq = kvmppc_get_clockfreq();
+    }
+
+    qemu_fdt_setprop_cell(fdt, "/cpus/cpu@0", "clock-frequency",
+                              clock_freq);
+    qemu_fdt_setprop_cell(fdt, "/cpus/cpu@0", "timebase-frequency",
+                              tb_freq);
+
+    rom_add_blob_fixed(BINARY_DEVICE_TREE_FILE, fdt, fdt_size, addr);
+    g_free(fdt);
+    ret = fdt_size;
+
+out:
+
+    return ret;
+}
+
+/* Create reset TLB entries for BookE, mapping only the flash memory.  */
+static void mmubooke_create_initial_mapping_uboot(CPUPPCState *env)
+{
+    ppcemb_tlb_t *tlb = &env->tlb.tlbe[0];
+
+    /* on reset the flash is mapped by a shadow TLB,
+     * but since we don't implement them we need to use
+     * the same values U-Boot will use to avoid a fault.
+     */
+    tlb->attr = 0;
+    tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4);
+    tlb->size = 0x10000000; /* up to 0xffffffff  */
+    tlb->EPN = 0xf0000000 & TARGET_PAGE_MASK;
+    tlb->RPN = (0xf0000000 & TARGET_PAGE_MASK) | 0x4;
+    tlb->PID = 0;
+}
+
+/* Create reset TLB entries for BookE, spanning the 32bit addr space.  */
+static void mmubooke_create_initial_mapping(CPUPPCState *env,
+                                     target_ulong va,
+                                     hwaddr pa)
+{
+    ppcemb_tlb_t *tlb = &env->tlb.tlbe[0];
+
+    tlb->attr = 0;
+    tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4);
+    tlb->size = 1 << 31; /* up to 0x80000000  */
+    tlb->EPN = va & TARGET_PAGE_MASK;
+    tlb->RPN = pa & TARGET_PAGE_MASK;
+    tlb->PID = 0;
+}
+
+static void main_cpu_reset(void *opaque)
+{
+    PowerPCCPU *cpu = opaque;
+    CPUPPCState *env = &cpu->env;
+    struct boot_info *bi = env->load_info;
+
+    cpu_reset(CPU(cpu));
+
+    /* either we have a kernel to boot or we jump to U-Boot */
+    if (bi->entry != UBOOT_ENTRY) {
+        env->gpr[1] = (16 << 20) - 8;
+        env->gpr[3] = FDT_ADDR;
+        env->nip = bi->entry;
+
+        /* Create a mapping for the kernel.  */
+        mmubooke_create_initial_mapping(env, 0, 0);
+        env->gpr[6] = tswap32(EPAPR_MAGIC);
+        env->gpr[7] = (16 << 20) - 8; /*bi->ima_size;*/
+
+    } else {
+        env->nip = UBOOT_ENTRY;
+        mmubooke_create_initial_mapping_uboot(env);
+    }
+}
+
+static void sam460ex_init(MachineState *machine)
+{
+    MemoryRegion *address_space_mem = get_system_memory();
+    MemoryRegion *isa = g_new(MemoryRegion, 1);
+    MemoryRegion *ram_memories = g_new(MemoryRegion, SDRAM_NR_BANKS);
+    hwaddr ram_bases[SDRAM_NR_BANKS];
+    hwaddr ram_sizes[SDRAM_NR_BANKS];
+    MemoryRegion *l2cache_ram = g_new(MemoryRegion, 1);
+    qemu_irq *irqs, *uic[4];
+    PCIBus *pci_bus;
+    PowerPCCPU *cpu;
+    CPUPPCState *env;
+    PPC4xxI2CState *i2c[2];
+    hwaddr entry = UBOOT_ENTRY;
+    hwaddr loadaddr = 0;
+    target_long initrd_size = 0;
+    DeviceState *dev;
+    SysBusDevice *sbdev;
+    int success;
+    int i;
+    struct boot_info *boot_info;
+    const size_t smbus_eeprom_size = 8 * 256;
+    uint8_t *smbus_eeprom_buf = g_malloc0(smbus_eeprom_size);
+
+    cpu = POWERPC_CPU(cpu_create(machine->cpu_type));
+    env = &cpu->env;
+    if (env->mmu_model != POWERPC_MMU_BOOKE) {
+        error_report("Only MMU model BookE is supported by this machine.");
+        exit(1);
+    }
+
+#ifdef TARGET_PPCEMB
+    if (!qtest_enabled()) {
+        warn_report("qemu-system-ppcemb is deprecated, "
+                    "please use qemu-system-ppc instead.");
+    }
+#endif
+
+    qemu_register_reset(main_cpu_reset, cpu);
+    boot_info = g_malloc0(sizeof(*boot_info));
+    env->load_info = boot_info;
+
+    ppc_booke_timers_init(cpu, 50000000, 0);
+    ppc_dcr_init(env, NULL, NULL);
+
+    /* PLB arbitrer */
+    ppc4xx_plb_init(env);
+
+    /* interrupt controllers */
+    irqs = g_malloc0(sizeof(*irqs) * PPCUIC_OUTPUT_NB);
+    irqs[PPCUIC_OUTPUT_INT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_INT];
+    irqs[PPCUIC_OUTPUT_CINT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_CINT];
+    uic[0] = ppcuic_init(env, irqs, 0xc0, 0, 1);
+    uic[1] = ppcuic_init(env, &uic[0][30], 0xd0, 0, 1);
+    uic[2] = ppcuic_init(env, &uic[0][10], 0xe0, 0, 1);
+    uic[3] = ppcuic_init(env, &uic[0][16], 0xf0, 0, 1);
+
+    /* SDRAM controller */
+    memset(ram_bases, 0, sizeof(ram_bases));
+    memset(ram_sizes, 0, sizeof(ram_sizes));
+    /* put all RAM on first bank because board has one slot
+     * and firmware only checks that */
+    machine->ram_size = ppc4xx_sdram_adjust(machine->ram_size, 1,
+                                   ram_memories, ram_bases, ram_sizes,
+                                   ppc460ex_sdram_bank_sizes);
+
+    /* FIXME: does 460EX have ECC interrupts? */
+    ppc440_sdram_init(env, SDRAM_NR_BANKS, ram_memories,
+                      ram_bases, ram_sizes, 1);
+
+    /* generate SPD EEPROM data */
+    for (i = 0; i < SDRAM_NR_BANKS; i++) {
+        generate_eeprom_spd(&smbus_eeprom_buf[i * 256], ram_sizes[i]);
+    }
+    generate_eeprom_serial(&smbus_eeprom_buf[4 * 256]);
+    generate_eeprom_serial(&smbus_eeprom_buf[6 * 256]);
+
+    /* IIC controllers */
+    dev = sysbus_create_simple(TYPE_PPC4xx_I2C, 0x4ef600700, uic[0][2]);
+    i2c[0] = PPC4xx_I2C(dev);
+    object_property_set_bool(OBJECT(dev), true, "realized", NULL);
+    smbus_eeprom_init(i2c[0]->bus, 8, smbus_eeprom_buf, smbus_eeprom_size);
+    g_free(smbus_eeprom_buf);
+
+    dev = sysbus_create_simple(TYPE_PPC4xx_I2C, 0x4ef600800, uic[0][3]);
+    i2c[1] = PPC4xx_I2C(dev);
+
+    /* External bus controller */
+    ppc405_ebc_init(env);
+
+    /* CPR */
+    ppc4xx_cpr_init(env);
+
+    /* PLB to AHB bridge */
+    ppc4xx_ahb_init(env);
+
+    /* System DCRs */
+    ppc4xx_sdr_init(env);
+
+    /* MAL */
+    ppc4xx_mal_init(env, 4, 16, &uic[2][3]);
+
+    /* 256K of L2 cache as memory */
+    ppc4xx_l2sram_init(env);
+    /* FIXME: remove this after fixing l2sram mapping in ppc440_uc.c? */
+    memory_region_init_ram(l2cache_ram, NULL, "ppc440.l2cache_ram", 256 << 10,
+                           &error_abort);
+    memory_region_add_subregion(address_space_mem, 0x400000000LL, l2cache_ram);
+
+    /* USB */
+    sysbus_create_simple(TYPE_PPC4xx_EHCI, 0x4bffd0400, uic[2][29]);
+    dev = qdev_create(NULL, "sysbus-ohci");
+    qdev_prop_set_string(dev, "masterbus", "usb-bus.0");
+    qdev_prop_set_uint32(dev, "num-ports", 6);
+    qdev_init_nofail(dev);
+    sbdev = SYS_BUS_DEVICE(dev);
+    sysbus_mmio_map(sbdev, 0, 0x4bffd0000);
+    sysbus_connect_irq(sbdev, 0, uic[2][30]);
+    usb_create_simple(usb_bus_find(-1), "usb-kbd");
+    usb_create_simple(usb_bus_find(-1), "usb-mouse");
+
+    /* PCI bus */
+    ppc460ex_pcie_init(env);
+    /* FIXME: is this correct? */
+    dev = sysbus_create_varargs("ppc440-pcix-host", 0xc0ec00000,
+                                uic[1][0], uic[1][20], uic[1][21], uic[1][22],
+                                NULL);
+    pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0");
+    if (!pci_bus) {
+        error_report("couldn't create PCI controller!");
+        exit(1);
+    }
+    memory_region_init_alias(isa, NULL, "isa_mmio", get_system_io(),
+                             0, 0x10000);
+    memory_region_add_subregion(get_system_memory(), 0xc08000000, isa);
+
+    /* PCI devices */
+    pci_create_simple(pci_bus, PCI_DEVFN(6, 0), "sm501");
+    /* SoC has a single SATA port but we don't emulate that yet
+     * However, firmware and usual clients have driver for SiI311x
+     * so add one for convenience by default */
+    if (defaults_enabled()) {
+        pci_create_simple(pci_bus, -1, "sii3112");
+    }
+
+    /* SoC has 4 UARTs
+     * but board has only one wired and two are present in fdt */
+    if (serial_hds[0] != NULL) {
+        serial_mm_init(address_space_mem, 0x4ef600300, 0, uic[1][1],
+                       PPC_SERIAL_MM_BAUDBASE, serial_hds[0],
+                       DEVICE_BIG_ENDIAN);
+    }
+    if (serial_hds[1] != NULL) {
+        serial_mm_init(address_space_mem, 0x4ef600400, 0, uic[0][1],
+                       PPC_SERIAL_MM_BAUDBASE, serial_hds[1],
+                       DEVICE_BIG_ENDIAN);
+    }
+
+    /* Load U-Boot image. */
+    if (!machine->kernel_filename) {
+        success = sam460ex_load_uboot();
+        if (success < 0) {
+            error_report("qemu: could not load firmware");
+            exit(1);
+        }
+    }
+
+    /* Load kernel. */
+    if (machine->kernel_filename) {
+        success = load_uimage(machine->kernel_filename, &entry, &loadaddr,
+                              NULL, NULL, NULL);
+        if (success < 0) {
+            uint64_t elf_entry, elf_lowaddr;
+
+            success = load_elf(machine->kernel_filename, NULL, NULL, &elf_entry,
+                               &elf_lowaddr, NULL, 1, PPC_ELF_MACHINE, 0, 0);
+            entry = elf_entry;
+            loadaddr = elf_lowaddr;
+        }
+        /* XXX try again as binary */
+        if (success < 0) {
+            error_report("qemu: could not load kernel '%s'",
+                    machine->kernel_filename);
+            exit(1);
+        }
+    }
+
+    /* Load initrd. */
+    if (machine->initrd_filename) {
+        initrd_size = load_image_targphys(machine->initrd_filename,
+                                          RAMDISK_ADDR,
+                                          machine->ram_size - RAMDISK_ADDR);
+        if (initrd_size < 0) {
+            error_report("qemu: could not load ram disk '%s' at %x",
+                    machine->initrd_filename, RAMDISK_ADDR);
+            exit(1);
+        }
+    }
+
+    /* If we're loading a kernel directly, we must load the device tree too. */
+    if (machine->kernel_filename) {
+        int dt_size;
+
+        dt_size = sam460ex_load_device_tree(FDT_ADDR, machine->ram_size,
+                                    RAMDISK_ADDR, initrd_size,
+                                    machine->kernel_cmdline);
+        if (dt_size < 0) {
+            error_report("couldn't load device tree");
+            exit(1);
+        }
+
+        boot_info->dt_base = FDT_ADDR;
+        boot_info->dt_size = dt_size;
+    }
+
+    boot_info->entry = entry;
+}
+
+static void sam460ex_machine_init(MachineClass *mc)
+{
+    mc->desc = "aCube Sam460ex";
+    mc->init = sam460ex_init;
+    mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("460exb");
+    mc->default_ram_size = 512 * M_BYTE;
+}
+
+DEFINE_MACHINE("sam460ex", sam460ex_machine_init)
diff --git a/pc-bios/canyonlands.dtb b/pc-bios/canyonlands.dtb
new file mode 100644
index 0000000000000000000000000000000000000000..9dce3443ad9578a8a4bb92ba6970cb2ae54d1ec3
GIT binary patch
literal 9779
zcmc&)%a0sK8L!?oi9<HFNy5`Sc5TU6VjIuwt{+H93?z{daIgeINIuv--MzDoXS$p2
zo_!c0mVbcch{VMQE*y{$$^~(7BqGECt*nRx5|^A17nFztLI@jvzpv`+shOR1w05MF
zR8#fU_o(kxRo&Hd|G9_%Fy_L#G3J^v=YE0qBI-v_&!D0#zKZdo?N9v%4q8Ne!u1!>
zDtsD!(h#P+v(YGySK}z(EAnBKCpE@c6u<HaJms&VQeF@Zv#3smoxEpJuU;yL{YypJ
zzmzsxX_co<FWtP->7<<wuyzj8ef0>sO^@!Ap!;S^SEp4L4Xw0wM`h)a?%Q+eHd;FR
zBZ$kfZ>#!BeM6YOVj*qMs@(eV2F8e^t*21WUN3gi>iSEo8&^87e2*B5qnv?26ZrNF
z{KFaer+}AHDVzLvQI}B_{*5vF09*K;2Xp*S4)-+LzvfYsZKoV=>5*H;&xwbCX*b8j
zH=}e^RC|Cd59QpL8C$}b+C@4R;mz_Ut*UX^gmIBKRWTf<mFK&Ufo>)1k5<Q79Ku)W
zu5plv5FODAp2Cl_H(-vi5Izaq1+;IVK7*=0L05{x8atKoMPO%bChka`yAyejtFz{k
z>U<v}A6Mryu=^|E|12tV;&ZN5`@R8~eFq!Hlypbhw+18%=^xiV^{3kRHe@}ieIJGl
z>iw*1A7$T%Ky##h+&od9#6I$}s(tUG|D^UIj$$A8UfTI6`?&7JzB;MU6<Y2!vVJh;
z)(=rrdXk2G!W)-|c`<erFW0rlI|8V(?Ywc>j?LR&oUejgj!*5oVYisp-YrhzXyAvS
zdicM+&j1#khikFomeCP=hihRR#apSjY3PvBa*c3rAP@8~9oIS?%xi#`Q5Ak&BGAGC
z*O119c5uBh4|N?A$92{E2ge&gk@s=5q9?{Y6#;FKq@9y}@~aO1d5q!Uj)&88B0#Jo
z@w(+(294%GH1cK>x^Sa&c~F8x=Fr@QZzg)j)n3^Yz3#OR3Mnn^MYQ(3FUwf==Fn0a
zc?jU(?ye3w9z6$6m``BjBweJoi9cy4tNN2MCXvK>Yp2Qwy>54+hR~8`Mi0;#H$S_!
zQ0`=Yt|()!ql)ZNJc@=gBr<u1h|gr)^O?YQGgLj1L%}}i8C;G*-{2=`y|@KDqv=zJ
zN6!|8XU`wz7WXUS;b+OMr_iS_xQ^H=FZ-;d_s5xg+#kihbSut!{msp!(>~ac|I?^q
z=eX{Nq;aMy2(->4@ll;-<3m}DD1Ck6-UF&3>xcc<&@WL%4+yquw5cTWA<wK7oPU_2
zD`Rb}?mgg;xrOR%o~w(VbvjSc3^-Mrwd8#c)#ggF6NjJx%tG8`zJCMaDxRK?{@3~W
zeBiHh(y};w`z+|>O8kf?kLE=O;LkaTLccN=bR22eehQU-QF`h(8(-=q_9mmq`W5D4
zjD>T*fVxuWWxWc5urAZ6>aK5C3a6XKj8jS6oDJe*<{Dv*_e_ojzjS!VBm14|9Mn-`
zmEwv8p`$&6*2aJYF5w(*5`zaMqbT+1Tz!aFpMW8F9k4K=wGp)ZIERDZ%5?ApnNY-U
zc->&1`nS(D81q)VqiFRY`Bd!vJ()V(`L&Rk6Kt>BzWS%#qtkv&%+$OX^X7FFmWKYv
zK4YFo)qId(&A`4c#Or*Vhcb9Z=|19g62Fo*$cyUc<}j+adY#n{22e=Db&Yr>tM%HK
z2E)tUwcNy;StyiB1ODLm08}@PBk?w?-rIjc8C6ZzWJPY@o;Wx1FF3f(m%*Wk;uzy=
z*DY7Pi{pg1i}yuMw>EbUlBSKb<tHz-J;c98c4xlu({BejQIo6|cTRLz2Bt?5HkUjd
z@Y>o6Aw7H^9DILsv$jWv$~A-F7O*|k!!n{78CZM4!5HtdLfz&CWZVVwcV(0od462y
z`?DHDJs78hG~Xt1YscchEC#=a_(cg)TY8DdIP4ci(~gNh7ykp8nPp{&oVXk&y){iG
znNRkk_VIx4b74QOtwq#F^M?E^e0~;Ld9oSz)~93<CubLNBu4RNu#d9LANFbcpWT&+
z!hhK}=gv*=B%QmqgB+I~f^B6TO*_d0Nh8j6q~Ao!8Tl1EC%p2Q<LBX#@hA7<yR8h$
z(HhLT`f&P~8x|*g9Ag|;^16HF^5s@<iS0YLh!#9M^yA;$n1iSG8RGv*1{9^A_pGev
zoY?K_>7G!?3%?ylPfUGCPZ>Loo}^{vy61j5rDwJl+k2#|x~zn@Jv*|gdkR1hfa2tt
z!8^BTl6ldM(O2}%?40xo73a7ZfR=hFtj~)<)x^Ck*MPA&KJTs6&FW~Q+gx+WqdWuP
zwj7<#%k!LgwUzf_jJb_T(~No>BAhfLJ4#lg<myIu0|O|&?5|JY_Du0*(`J<|@>^d{
zKeHUemlXG&zEmA$&Ow<KHh_H%An|8VWiN4W4J4y%r$6KNEMc_~U5c}QN=H!~-Wg??
z6`VN1<dw6NH&#S@hdV*?d-C~cD*K=4DKe{p3hiFDLP^i(LeW*wo=|})WlHWx3DZ&J
zMOmP&>@%<UjzGgEb2ibIn9*IgyMU!_V*<1{BOoxNcy_#S9WYbRpM(4QoH;fgbB-71
z&7t=g!TjsvR>vE-S>7qC_AHn8N5)8eKDlHhxKZ!rF?45f_DF8?>~S_vJ=-hIao!J>
zv9$g70LF*0;d<x#<hmj3=3_3>RP&}A!>PN#b*shcu<!*8aLp=w#Stj{$}~K6Z;JUA
zzGKY!iynVGeReLCHmzFuKQg9Ak(5uJUY*HD%KRA#P*jJz=rjKm{uTNx3jYp$=8nRD
zAQFWz%EDXt(f;3EpT1&Vx6cmK`JkT(gpcdu{m2I{Ug`mP?|VMz-Jj+I7c^~j^D!Uf
zIC#^I9VZ{WGi8DKKz~p!<V!yI_zx-{d>xn%On#^10`o!f=pL013%o(lHLLl-m~l^%
zeW}FtNZd)|nP+a&-T)4b&Kb<EZ91PaoK7T_KH+6ld#>P~4{~<B&68Ju90G~Zvr!${
zXWS`+&FA@p`ejs}<4dRBz^_|?(z8EHr|wIKdM};&Bl~m@`_ldweab;BgF953WnX^H
zbFLLwaTW#sw_OjrlSpzPnk6QU6pNsI++{3Y{hAw|ZT9T|>A<?EWPH}*7-m@fmL-|`
zb#mLi(nr!>7OFzk12{I_?cpf4g*ft)?n&Z#4*Y&R@%}P7FkC?KjY<mVLuq4*xfgHR
zG0}z328^W~{L2=xbW(f>7g&8^PjJC`oFvYM#l&_6o)=3wASh%Xl@9TWK0Au1XJUDJ
zUkM*SmOY60F)DSP7t5y|u7q8B?qNs@XC<C{K4aw<nn4`>HH+h1#L@0q9AV;UH~W5m
z*q8muvla0lbbinWw5QFFWdN)w$Pebmq5N3JAgiArJqORtk9{Cn_E8VzhlmFPEtT=g
z>3torE$2J#THgoHJyh~yhC^$eu_CT~M1D|1#>y|6A9`N;ILf2k=TT?*2ouM<3HEJ%
z*sm9(I_te;-^AThz18h3=<FS)dtm^fesN%zg>y2G2W+XZ^CrhJ&tif)L|@?%DNq#N
ze);7oSl1Ns5I6OlL7h47c;y*Y{fM~^omnDyLO*q1-ShlT8O%dQo0Tx1HQ85x^L>Oc
z=O&)MQ9Nl_pE(~TNtM=h7^lNwZO+%(oz(S5MS|PCxEPiA??E5;|4CehxCcq|#^|G4
zr|or(y(;Lqwri4fJB!ns&0d+BDjk@3Sj4x(%_{xDIL+fd(`2Kxk3XAuLz(+HILz`i
zq$(ykG@>+9XbV8Uxc#?+s2jyGjT=GVA~AWo+u%dSb~?0DO}T~ZBUm=?-wuWz39~%G
zxk1Zm!g-HS{MEv>C&T$@oa0h33CDTX0E=nDq<}?rgE{+qri$_b{%DhrM`44{anQs9
zl>)8oa1@p1JU<lJAfZ<qf_XH8gnpFY4tKJo*)qeZ&ydBH9jw!)$?`#MwzH}kM?<k8
z9#;$@KRTp|;S06zw5<r<O7N16V1a>e&@Mv^KE#DKrqXpv^9Gn0r?v%m5mV@9LkP@f
zwpmyJTob^@goA95A|QJq^Uii)wtbg&(^`P8;xv5abqIEKm=<LDc3L%XKAerv6|v!H
zp6<8-3>Rf=XsC)Pt85hE-!j9f8l(`=FUENSx8_N)Q=2r8umVDCA>mfRr2y}{0QSeV
k?Rpu2fWdXRmM)8`G5p5QL^otl@NGppf}g}V#(a(WKOpmTga7~l

literal 0
HcmV?d00001

diff --git a/pc-bios/canyonlands.dts b/pc-bios/canyonlands.dts
new file mode 100644
index 0000000..0d6ac92
--- /dev/null
+++ b/pc-bios/canyonlands.dts
@@ -0,0 +1,566 @@
+/*
+ * Device Tree Source for AMCC Canyonlands (460EX)
+ *
+ * Copyright 2008-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,canyonlands";
+	compatible = "amcc,canyonlands";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,460EX";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			next-level-cache = <&L2C0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460ex";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460ex";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	CPM0: cpm {
+		compatible = "ibm,cpm";
+		dcr-access-method = "native";
+		dcr-reg = <0x160 0x003>;
+		unused-units = <0x00000100>;
+		idle-doze = <0x02000000>;
+		standby = <0xfeff791d>;
+	};
+
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-460ex", "ibm,l2-cache";
+		dcr-reg = <0x020 0x008		/* Internal SRAM DCR's */
+			   0x030 0x008>;	/* L2 cache DCR's */
+		cache-line-size = <32>;		/* 32 bytes */
+		cache-size = <262144>;		/* L2, 256K */
+		interrupt-parent = <&UIC1>;
+		interrupts = <11 1>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460ex", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		CRYPTO: crypto@180000 {
+			compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto";
+			reg = <4 0x00180000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x1d 0x4>;
+		};
+
+		HWRNG: hwrng@110000 {
+			compatible = "amcc,ppc460ex-rng", "ppc4xx-rng";
+			reg = <4 0x00110000 0x50>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <16>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x3 0x4
+					/*TXDE*/  0x4 0x4
+					/*RXDE*/  0x5 0x4>;
+		};
+
+		USB0: ehci@bffd0400 {
+			compatible = "ibm,usb-ehci-460ex", "usb-ehci";
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x1d 4>;
+			reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>;
+		};
+
+		USB1: usb@bffd0000 {
+			compatible = "ohci-le";
+			reg = <4 0xbffd0000 0x60>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x1e 4>;
+		};
+
+		USBOTG0: usbotg@bff80000 {
+			compatible = "amcc,dwc-otg";
+			reg = <0x4 0xbff80000 0x10000>;
+			interrupt-parent = <&USBOTG0>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupts = <0x0 0x1 0x2>;
+			interrupt-map = </* USB-OTG */ 0x0 &UIC2 0x1c 0x4
+					 /* HIGH-POWER */ 0x1 &UIC1 0x1a 0x8
+					 /* DMA */ 0x2 &UIC0 0xc 0x4>;
+		};
+
+		AHBDMA: dma@bffd0800 {
+			compatible = "snps,dma-spear1340";
+			reg = <4 0xbffd0800 0x400>;
+			interrupt-parent = <&UIC3>;
+			interrupts = <0x5 0x4>;
+			#dma-cells = <3>;
+		};
+
+		SATA0: sata@bffd1000 {
+			compatible = "amcc,sata-460ex";
+			reg = <4 0xbffd1000 0x800>;
+			interrupt-parent = <&UIC3>;
+			interrupts = <0x0 0x4>;
+			dmas = <&AHBDMA 0 1 0>;
+			dma-names = "sata-dma";
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460ex", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460ex", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x6 0x4>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl512n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x04000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "ramdisk";
+						reg = <0x00200000 0x01400000>;
+					};
+					partition@1600000 {
+						label = "jffs2";
+						reg = <0x01600000 0x00400000>;
+					};
+					partition@1a00000 {
+						label = "user";
+						reg = <0x01a00000 0x02560000>;
+					};
+					partition@3f60000 {
+						label = "env";
+						reg = <0x03f60000 0x00040000>;
+					};
+					partition@3fa0000 {
+						label = "u-boot";
+						reg = <0x03fa0000 0x00060000>;
+					};
+				};
+
+				cpld@2,0 {
+					compatible = "amcc,ppc460ex-bcsr";
+					reg = <2 0x0 0x9>;
+				};
+
+				ndfc@3,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000003 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x00100000>;
+						};
+						partition@100000 {
+							label = "user";
+							reg = <0x00000000 0x03f00000>;
+						};
+					};
+				};
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1 0x4>;
+			};
+
+			UART1: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-460ex", "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+                                rtc@68 {
+                                        compatible = "st,m41t80";
+                                        reg = <0x68>;
+					interrupt-parent = <&UIC2>;
+					interrupts = <0x19 0x8>;
+                                };
+                                sttm@48 {
+                                        compatible = "ad,ad7414";
+                                        reg = <0x48>;
+					interrupt-parent = <&UIC1>;
+					interrupts = <0x14 0x8>;
+                                };
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-460ex", "ibm,iic";
+				reg = <0xef600800 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+			};
+
+			GPIO0: gpio@ef600b00 {
+				compatible = "ibm,ppc4xx-gpio";
+				reg = <0xef600b00 0x00000048>;
+				gpio-controller;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-460ex", "ibm,zmii";
+				reg = <0xef600d00 0x0000000c>;
+			};
+
+			RGMII0: emac-rgmii@ef601500 {
+				compatible = "ibm,rgmii-460ex", "ibm,rgmii";
+				reg = <0xef601500 0x00000008>;
+				has-mdio;
+			};
+
+			TAH0: emac-tah@ef601350 {
+				compatible = "ibm,tah-460ex", "ibm,tah";
+				reg = <0xef601350 0x00000030>;
+			};
+
+			TAH1: emac-tah@ef601450 {
+				compatible = "ibm,tah-460ex", "ibm,tah";
+				reg = <0xef601450 0x00000030>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-460ex", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600e00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-460ex", "ibm,emac4sync";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
+				reg = <0xef600f00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				tah-device = <&TAH1>;
+				tah-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+
+		PCIX0: pci@c0ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pcix-460ex", "ibm,plb-pcix";
+			primary;
+			large-inbound-windows;
+			enable-msi-hole;
+			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
+			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 0 to 0x3f */
+			bus-range = <0x0 0x3f>;
+
+			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
+		};
+
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08010000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 40 to 0x7f */
+			bus-range = <0x40 0x7f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08011000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 80 to 0xbf */
+			bus-range = <0x80 0xbf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
+		};
+
+		MSI: ppc4xx-msi@C10000000 {
+			compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
+			reg = < 0xC 0x10000000 0x100>;
+			sdr-base = <0x36C>;
+			msi-data = <0x00000000>;
+			msi-mask = <0x44440000>;
+			interrupt-count = <3>;
+			interrupts = <0 1 2 3>;
+			interrupt-parent = <&UIC3>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0 &UIC3 0x18 1
+					1 &UIC3 0x19 1
+					2 &UIC3 0x1A 1
+					3 &UIC3 0x1B 1>;
+		};
+	};
+};
-- 
2.7.6

^ permalink raw reply related	[flat|nested] 9+ messages in thread

* Re: [Qemu-devel] [PATCH v3 2/2] ppc: Add aCube Sam460ex board
  2018-02-19 10:34 ` [Qemu-devel] [PATCH v3 2/2] ppc: Add aCube Sam460ex board BALATON Zoltan
@ 2018-02-20  2:40   ` David Gibson
  2018-02-20 10:09     ` BALATON Zoltan
  0 siblings, 1 reply; 9+ messages in thread
From: David Gibson @ 2018-02-20  2:40 UTC (permalink / raw)
  To: BALATON Zoltan; +Cc: qemu-devel, qemu-ppc, Alexander Graf, Francois Revol

[-- Attachment #1: Type: text/plain, Size: 48415 bytes --]

On Mon, Feb 19, 2018 at 11:34:25AM +0100, BALATON Zoltan wrote:
1;5002;0c> Add emulation of aCube Sam460ex board based on AMCC 460EX embedded SoC.
> This is not a complete implementation yet with a lot of components
> still missing but enough for the U-Boot firmware to start and to boot
> a Linux kernel or AROS.
> 
> Signed-off-by: François Revol <revol@free.fr>
> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>

I'm not thrilled with having a machine type that can't be used without
extracting a bootloader image from somewhere, but from the other
thread that's not easy to fix.

Since we have dtc in a submodule, there's really no reason we should
be including .dtb files as well as .dts files, we should build them
ourselves.  But fixing that isn't really in scope for this patch.

So, applied.

> ---
> v3:
> - Added device tree source and blob
> - Fixed clock frequency in device tree
>     
> v2:
> - Rebased to latest changes on master
> - Replaced printfs with error_report
> 
>  Makefile                           |   2 +-
>  default-configs/ppc-softmmu.mak    |   2 +
>  default-configs/ppcemb-softmmu.mak |   1 +
>  hw/ppc/Makefile.objs               |   3 +-
>  hw/ppc/sam460ex.c                  | 603 +++++++++++++++++++++++++++++++++++++
>  pc-bios/canyonlands.dtb            | Bin 0 -> 9779 bytes
>  pc-bios/canyonlands.dts            | 566 ++++++++++++++++++++++++++++++++++
>  7 files changed, 1175 insertions(+), 2 deletions(-)
>  create mode 100644 hw/ppc/sam460ex.c
>  create mode 100644 pc-bios/canyonlands.dtb
>  create mode 100644 pc-bios/canyonlands.dts
> 
> diff --git a/Makefile b/Makefile
> index 90e05ac..6434d6c 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -656,7 +656,7 @@ efi-e1000.rom efi-eepro100.rom efi-ne2k_pci.rom \
>  efi-pcnet.rom efi-rtl8139.rom efi-virtio.rom \
>  efi-e1000e.rom efi-vmxnet3.rom \
>  qemu-icon.bmp qemu_logo_no_text.svg \
> -bamboo.dtb petalogix-s3adsp1800.dtb petalogix-ml605.dtb \
> +bamboo.dtb canyonlands.dtb petalogix-s3adsp1800.dtb petalogix-ml605.dtb \
>  multiboot.bin linuxboot.bin linuxboot_dma.bin kvmvapic.bin \
>  s390-ccw.img s390-netboot.img \
>  spapr-rtas.bin slof.bin skiboot.lid \
> diff --git a/default-configs/ppc-softmmu.mak b/default-configs/ppc-softmmu.mak
> index 76e29cf..4d7be45 100644
> --- a/default-configs/ppc-softmmu.mak
> +++ b/default-configs/ppc-softmmu.mak
> @@ -21,6 +21,8 @@ CONFIG_E500=y
>  CONFIG_OPENPIC_KVM=$(call land,$(CONFIG_E500),$(CONFIG_KVM))
>  CONFIG_PLATFORM_BUS=y
>  CONFIG_ETSEC=y
> +# For Sam460ex
> +CONFIG_USB_EHCI_SYSBUS=y
>  CONFIG_SM501=y
>  CONFIG_IDE_SII3112=y
>  CONFIG_I2C=y
> diff --git a/default-configs/ppcemb-softmmu.mak b/default-configs/ppcemb-softmmu.mak
> index bc5e1b3..67d18b2 100644
> --- a/default-configs/ppcemb-softmmu.mak
> +++ b/default-configs/ppcemb-softmmu.mak
> @@ -15,6 +15,7 @@ CONFIG_PTIMER=y
>  CONFIG_I8259=y
>  CONFIG_XILINX=y
>  CONFIG_XILINX_ETHLITE=y
> +CONFIG_USB_EHCI_SYSBUS=y
>  CONFIG_SM501=y
>  CONFIG_IDE_SII3112=y
>  CONFIG_I2C=y
> diff --git a/hw/ppc/Makefile.objs b/hw/ppc/Makefile.objs
> index bddc742..86d82a6 100644
> --- a/hw/ppc/Makefile.objs
> +++ b/hw/ppc/Makefile.objs
> @@ -13,7 +13,8 @@ endif
>  obj-$(CONFIG_PSERIES) += spapr_rtas_ddw.o
>  # PowerPC 4xx boards
>  obj-y += ppc4xx_devs.o ppc405_uc.o
> -obj-$(CONFIG_PPC4XX) += ppc4xx_pci.o ppc405_boards.o ppc440_bamboo.o ppc440_pcix.o
> +obj-$(CONFIG_PPC4XX) += ppc4xx_pci.o ppc405_boards.o
> +obj-$(CONFIG_PPC4XX) += ppc440_bamboo.o ppc440_pcix.o ppc440_uc.o sam460ex.o
>  # PReP
>  obj-$(CONFIG_PREP) += prep.o
>  obj-$(CONFIG_PREP) += prep_systemio.o
> diff --git a/hw/ppc/sam460ex.c b/hw/ppc/sam460ex.c
> new file mode 100644
> index 0000000..70b8e76
> --- /dev/null
> +++ b/hw/ppc/sam460ex.c
> @@ -0,0 +1,603 @@
> +/*
> + * QEMU aCube Sam460ex board emulation
> + *
> + * Copyright (c) 2012 François Revol
> + * Copyright (c) 2016-2018 BALATON Zoltan
> + *
> + * This file is derived from hw/ppc440_bamboo.c,
> + * the copyright for that material belongs to the original owners.
> + *
> + * This work is licensed under the GNU GPL license version 2 or later.
> + *
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu-common.h"
> +#include "qemu/cutils.h"
> +#include "qemu/error-report.h"
> +#include "qapi/error.h"
> +#include "hw/hw.h"
> +#include "sysemu/blockdev.h"
> +#include "hw/boards.h"
> +#include "sysemu/kvm.h"
> +#include "kvm_ppc.h"
> +#include "sysemu/device_tree.h"
> +#include "sysemu/block-backend.h"
> +#include "hw/loader.h"
> +#include "elf.h"
> +#include "exec/address-spaces.h"
> +#include "exec/memory.h"
> +#include "hw/ppc/ppc440.h"
> +#include "hw/ppc/ppc405.h"
> +#include "hw/block/flash.h"
> +#include "sysemu/sysemu.h"
> +#include "sysemu/qtest.h"
> +#include "hw/sysbus.h"
> +#include "hw/char/serial.h"
> +#include "hw/i2c/ppc4xx_i2c.h"
> +#include "hw/i2c/smbus.h"
> +#include "hw/usb/hcd-ehci.h"
> +
> +#define BINARY_DEVICE_TREE_FILE "canyonlands.dtb"
> +#define UBOOT_FILENAME "u-boot-sam460-20100605.bin"
> +/* to extract the official U-Boot bin from the updater: */
> +/* dd bs=1 skip=$(($(stat -c '%s' updater/updater-460) - 0x80000)) \
> +     if=updater/updater-460 of=u-boot-sam460-20100605.bin */
> +
> +/* from Sam460 U-Boot include/configs/Sam460ex.h */
> +#define FLASH_BASE             0xfff00000
> +#define FLASH_BASE_H           0x4
> +#define FLASH_SIZE             (1 << 20)
> +#define UBOOT_LOAD_BASE        0xfff80000
> +#define UBOOT_SIZE             0x00080000
> +#define UBOOT_ENTRY            0xfffffffc
> +
> +/* from U-Boot */
> +#define EPAPR_MAGIC           (0x45504150)
> +#define KERNEL_ADDR           0x1000000
> +#define FDT_ADDR              0x1800000
> +#define RAMDISK_ADDR          0x1900000
> +
> +/* Sam460ex IRQ MAP:
> +   IRQ0  = ETH_INT
> +   IRQ1  = FPGA_INT
> +   IRQ2  = PCI_INT (PCIA, PCIB, PCIC, PCIB)
> +   IRQ3  = FPGA_INT2
> +   IRQ11 = RTC_INT
> +   IRQ12 = SM502_INT
> +*/
> +
> +#define SDRAM_NR_BANKS 4
> +
> +/* FIXME: See u-boot.git 8ac41e, also fix in ppc440_uc.c */
> +static const unsigned int ppc460ex_sdram_bank_sizes[] = {
> +    1024 << 20, 512 << 20, 256 << 20, 128 << 20, 64 << 20, 32 << 20, 0
> +};
> +
> +struct boot_info {
> +    uint32_t dt_base;
> +    uint32_t dt_size;
> +    uint32_t entry;
> +};
> +
> +/*****************************************************************************/
> +/* SPD eeprom content from mips_malta.c */
> +
> +struct _eeprom24c0x_t {
> +  uint8_t tick;
> +  uint8_t address;
> +  uint8_t command;
> +  uint8_t ack;
> +  uint8_t scl;
> +  uint8_t sda;
> +  uint8_t data;
> +  uint8_t contents[256];
> +};
> +
> +typedef struct _eeprom24c0x_t eeprom24c0x_t;
> +
> +static eeprom24c0x_t spd_eeprom = {
> +    .contents = {
> +        /* 00000000: */ 0x80, 0x08, 0xFF, 0x0D, 0x0A, 0xFF, 0x40, 0x00,
> +        /* 00000008: */ 0x04, 0x75, 0x54, 0x00, 0x82, 0x08, 0x00, 0x01,
> +        /* 00000010: */ 0x8F, 0x04, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00,
> +        /* 00000018: */ 0x00, 0x00, 0x00, 0x14, 0x0F, 0x14, 0x2D, 0xFF,
> +        /* 00000020: */ 0x15, 0x08, 0x15, 0x08, 0x00, 0x00, 0x00, 0x00,
> +        /* 00000028: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +        /* 00000030: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +        /* 00000038: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x12, 0xD0,
> +        /* 00000040: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +        /* 00000048: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +        /* 00000050: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +        /* 00000058: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +        /* 00000060: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +        /* 00000068: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +        /* 00000070: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +        /* 00000078: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x64, 0xF4,
> +    },
> +};
> +
> +static void generate_eeprom_spd(uint8_t *eeprom, ram_addr_t ram_size)
> +{
> +    enum { SDR = 0x4, DDR1 = 0x7, DDR2 = 0x8 } type;
> +    uint8_t *spd = spd_eeprom.contents;
> +    uint8_t nbanks = 0;
> +    uint16_t density = 0;
> +    int i;
> +
> +    /* work in terms of MB */
> +    ram_size >>= 20;
> +
> +    while ((ram_size >= 4) && (nbanks <= 2)) {
> +        int sz_log2 = MIN(31 - clz32(ram_size), 14);
> +        nbanks++;
> +        density |= 1 << (sz_log2 - 2);
> +        ram_size -= 1 << sz_log2;
> +    }
> +
> +    /* split to 2 banks if possible */
> +    if ((nbanks == 1) && (density > 1)) {
> +        nbanks++;
> +        density >>= 1;
> +    }
> +
> +    if (density & 0xff00) {
> +        density = (density & 0xe0) | ((density >> 8) & 0x1f);
> +        type = DDR2;
> +    } else if (!(density & 0x1f)) {
> +        type = DDR2;
> +    } else {
> +        type = SDR;
> +    }
> +
> +    if (ram_size) {
> +        warn_report("SPD cannot represent final " RAM_ADDR_FMT "MB"
> +                    " of SDRAM", ram_size);
> +    }
> +
> +    /* fill in SPD memory information */
> +    spd[2] = type;
> +    spd[5] = nbanks;
> +    spd[31] = density;
> +
> +    /* XXX: this is totally random */
> +    spd[9] = 0x10; /* CAS tcyc */
> +    spd[18] = 0x20; /* CAS bit */
> +    spd[23] = 0x10; /* CAS tcyc */
> +    spd[25] = 0x10; /* CAS tcyc */
> +
> +    /* checksum */
> +    spd[63] = 0;
> +    for (i = 0; i < 63; i++) {
> +        spd[63] += spd[i];
> +    }
> +
> +    /* copy for SMBUS */
> +    memcpy(eeprom, spd, sizeof(spd_eeprom.contents));
> +}
> +
> +static void generate_eeprom_serial(uint8_t *eeprom)
> +{
> +    int i, pos = 0;
> +    uint8_t mac[6] = { 0x00 };
> +    uint8_t sn[5] = { 0x01, 0x23, 0x45, 0x67, 0x89 };
> +
> +    /* version */
> +    eeprom[pos++] = 0x01;
> +
> +    /* count */
> +    eeprom[pos++] = 0x02;
> +
> +    /* MAC address */
> +    eeprom[pos++] = 0x01; /* MAC */
> +    eeprom[pos++] = 0x06; /* length */
> +    memcpy(&eeprom[pos], mac, sizeof(mac));
> +    pos += sizeof(mac);
> +
> +    /* serial number */
> +    eeprom[pos++] = 0x02; /* serial */
> +    eeprom[pos++] = 0x05; /* length */
> +    memcpy(&eeprom[pos], sn, sizeof(sn));
> +    pos += sizeof(sn);
> +
> +    /* checksum */
> +    eeprom[pos] = 0;
> +    for (i = 0; i < pos; i++) {
> +        eeprom[pos] += eeprom[i];
> +    }
> +}
> +
> +/*****************************************************************************/
> +
> +static int sam460ex_load_uboot(void)
> +{
> +    DriveInfo *dinfo;
> +    BlockBackend *blk = NULL;
> +    hwaddr base = FLASH_BASE | ((hwaddr)FLASH_BASE_H << 32);
> +    long bios_size = FLASH_SIZE;
> +    int fl_sectors;
> +
> +    dinfo = drive_get(IF_PFLASH, 0, 0);
> +    if (dinfo) {
> +        blk = blk_by_legacy_dinfo(dinfo);
> +        bios_size = blk_getlength(blk);
> +    }
> +    fl_sectors = (bios_size + 65535) >> 16;
> +
> +    if (!pflash_cfi01_register(base, NULL, "sam460ex.flash", bios_size,
> +                               blk, (64 * 1024), fl_sectors,
> +                               1, 0x89, 0x18, 0x0000, 0x0, 1)) {
> +        error_report("qemu: Error registering flash memory.");
> +        /* XXX: return an error instead? */
> +        exit(1);
> +    }
> +
> +    if (!blk) {
> +        /*error_report("No flash image given with the 'pflash' parameter,"
> +                " using default u-boot image");*/
> +        base = UBOOT_LOAD_BASE | ((hwaddr)FLASH_BASE_H << 32);
> +        rom_add_file_fixed(UBOOT_FILENAME, base, -1);
> +    }
> +
> +    return 0;
> +}
> +
> +static int sam460ex_load_device_tree(hwaddr addr,
> +                                     uint32_t ramsize,
> +                                     hwaddr initrd_base,
> +                                     hwaddr initrd_size,
> +                                     const char *kernel_cmdline)
> +{
> +    int ret = -1;
> +    uint32_t mem_reg_property[] = { 0, 0, cpu_to_be32(ramsize) };
> +    char *filename;
> +    int fdt_size;
> +    void *fdt;
> +    uint32_t tb_freq = 50000000;
> +    uint32_t clock_freq = 50000000;
> +
> +    filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, BINARY_DEVICE_TREE_FILE);
> +    if (!filename) {
> +        goto out;
> +    }
> +    fdt = load_device_tree(filename, &fdt_size);
> +    g_free(filename);
> +    if (fdt == NULL) {
> +        goto out;
> +    }
> +
> +    /* Manipulate device tree in memory. */
> +
> +    ret = qemu_fdt_setprop(fdt, "/memory", "reg", mem_reg_property,
> +                               sizeof(mem_reg_property));
> +    if (ret < 0) {
> +        error_report("couldn't set /memory/reg");
> +    }
> +
> +    /* default FDT doesn't have a /chosen node... */
> +    qemu_fdt_add_subnode(fdt, "/chosen");
> +
> +    ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start",
> +                                    initrd_base);
> +    if (ret < 0) {
> +        error_report("couldn't set /chosen/linux,initrd-start");
> +    }
> +
> +    ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end",
> +                                    (initrd_base + initrd_size));
> +    if (ret < 0) {
> +        error_report("couldn't set /chosen/linux,initrd-end");
> +    }
> +
> +    ret = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs",
> +                                      kernel_cmdline);
> +    if (ret < 0) {
> +        error_report("couldn't set /chosen/bootargs");
> +    }
> +
> +    /* Copy data from the host device tree into the guest. Since the guest can
> +     * directly access the timebase without host involvement, we must expose
> +     * the correct frequencies. */
> +    if (kvm_enabled()) {
> +        tb_freq = kvmppc_get_tbfreq();
> +        clock_freq = kvmppc_get_clockfreq();
> +    }
> +
> +    qemu_fdt_setprop_cell(fdt, "/cpus/cpu@0", "clock-frequency",
> +                              clock_freq);
> +    qemu_fdt_setprop_cell(fdt, "/cpus/cpu@0", "timebase-frequency",
> +                              tb_freq);
> +
> +    rom_add_blob_fixed(BINARY_DEVICE_TREE_FILE, fdt, fdt_size, addr);
> +    g_free(fdt);
> +    ret = fdt_size;
> +
> +out:
> +
> +    return ret;
> +}
> +
> +/* Create reset TLB entries for BookE, mapping only the flash memory.  */
> +static void mmubooke_create_initial_mapping_uboot(CPUPPCState *env)
> +{
> +    ppcemb_tlb_t *tlb = &env->tlb.tlbe[0];
> +
> +    /* on reset the flash is mapped by a shadow TLB,
> +     * but since we don't implement them we need to use
> +     * the same values U-Boot will use to avoid a fault.
> +     */
> +    tlb->attr = 0;
> +    tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4);
> +    tlb->size = 0x10000000; /* up to 0xffffffff  */
> +    tlb->EPN = 0xf0000000 & TARGET_PAGE_MASK;
> +    tlb->RPN = (0xf0000000 & TARGET_PAGE_MASK) | 0x4;
> +    tlb->PID = 0;
> +}
> +
> +/* Create reset TLB entries for BookE, spanning the 32bit addr space.  */
> +static void mmubooke_create_initial_mapping(CPUPPCState *env,
> +                                     target_ulong va,
> +                                     hwaddr pa)
> +{
> +    ppcemb_tlb_t *tlb = &env->tlb.tlbe[0];
> +
> +    tlb->attr = 0;
> +    tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4);
> +    tlb->size = 1 << 31; /* up to 0x80000000  */
> +    tlb->EPN = va & TARGET_PAGE_MASK;
> +    tlb->RPN = pa & TARGET_PAGE_MASK;
> +    tlb->PID = 0;
> +}
> +
> +static void main_cpu_reset(void *opaque)
> +{
> +    PowerPCCPU *cpu = opaque;
> +    CPUPPCState *env = &cpu->env;
> +    struct boot_info *bi = env->load_info;
> +
> +    cpu_reset(CPU(cpu));
> +
> +    /* either we have a kernel to boot or we jump to U-Boot */
> +    if (bi->entry != UBOOT_ENTRY) {
> +        env->gpr[1] = (16 << 20) - 8;
> +        env->gpr[3] = FDT_ADDR;
> +        env->nip = bi->entry;
> +
> +        /* Create a mapping for the kernel.  */
> +        mmubooke_create_initial_mapping(env, 0, 0);
> +        env->gpr[6] = tswap32(EPAPR_MAGIC);
> +        env->gpr[7] = (16 << 20) - 8; /*bi->ima_size;*/
> +
> +    } else {
> +        env->nip = UBOOT_ENTRY;
> +        mmubooke_create_initial_mapping_uboot(env);
> +    }
> +}
> +
> +static void sam460ex_init(MachineState *machine)
> +{
> +    MemoryRegion *address_space_mem = get_system_memory();
> +    MemoryRegion *isa = g_new(MemoryRegion, 1);
> +    MemoryRegion *ram_memories = g_new(MemoryRegion, SDRAM_NR_BANKS);
> +    hwaddr ram_bases[SDRAM_NR_BANKS];
> +    hwaddr ram_sizes[SDRAM_NR_BANKS];
> +    MemoryRegion *l2cache_ram = g_new(MemoryRegion, 1);
> +    qemu_irq *irqs, *uic[4];
> +    PCIBus *pci_bus;
> +    PowerPCCPU *cpu;
> +    CPUPPCState *env;
> +    PPC4xxI2CState *i2c[2];
> +    hwaddr entry = UBOOT_ENTRY;
> +    hwaddr loadaddr = 0;
> +    target_long initrd_size = 0;
> +    DeviceState *dev;
> +    SysBusDevice *sbdev;
> +    int success;
> +    int i;
> +    struct boot_info *boot_info;
> +    const size_t smbus_eeprom_size = 8 * 256;
> +    uint8_t *smbus_eeprom_buf = g_malloc0(smbus_eeprom_size);
> +
> +    cpu = POWERPC_CPU(cpu_create(machine->cpu_type));
> +    env = &cpu->env;
> +    if (env->mmu_model != POWERPC_MMU_BOOKE) {
> +        error_report("Only MMU model BookE is supported by this machine.");
> +        exit(1);
> +    }
> +
> +#ifdef TARGET_PPCEMB
> +    if (!qtest_enabled()) {
> +        warn_report("qemu-system-ppcemb is deprecated, "
> +                    "please use qemu-system-ppc instead.");
> +    }
> +#endif
> +
> +    qemu_register_reset(main_cpu_reset, cpu);
> +    boot_info = g_malloc0(sizeof(*boot_info));
> +    env->load_info = boot_info;
> +
> +    ppc_booke_timers_init(cpu, 50000000, 0);
> +    ppc_dcr_init(env, NULL, NULL);
> +
> +    /* PLB arbitrer */
> +    ppc4xx_plb_init(env);
> +
> +    /* interrupt controllers */
> +    irqs = g_malloc0(sizeof(*irqs) * PPCUIC_OUTPUT_NB);
> +    irqs[PPCUIC_OUTPUT_INT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_INT];
> +    irqs[PPCUIC_OUTPUT_CINT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_CINT];
> +    uic[0] = ppcuic_init(env, irqs, 0xc0, 0, 1);
> +    uic[1] = ppcuic_init(env, &uic[0][30], 0xd0, 0, 1);
> +    uic[2] = ppcuic_init(env, &uic[0][10], 0xe0, 0, 1);
> +    uic[3] = ppcuic_init(env, &uic[0][16], 0xf0, 0, 1);
> +
> +    /* SDRAM controller */
> +    memset(ram_bases, 0, sizeof(ram_bases));
> +    memset(ram_sizes, 0, sizeof(ram_sizes));
> +    /* put all RAM on first bank because board has one slot
> +     * and firmware only checks that */
> +    machine->ram_size = ppc4xx_sdram_adjust(machine->ram_size, 1,
> +                                   ram_memories, ram_bases, ram_sizes,
> +                                   ppc460ex_sdram_bank_sizes);
> +
> +    /* FIXME: does 460EX have ECC interrupts? */
> +    ppc440_sdram_init(env, SDRAM_NR_BANKS, ram_memories,
> +                      ram_bases, ram_sizes, 1);
> +
> +    /* generate SPD EEPROM data */
> +    for (i = 0; i < SDRAM_NR_BANKS; i++) {
> +        generate_eeprom_spd(&smbus_eeprom_buf[i * 256], ram_sizes[i]);
> +    }
> +    generate_eeprom_serial(&smbus_eeprom_buf[4 * 256]);
> +    generate_eeprom_serial(&smbus_eeprom_buf[6 * 256]);
> +
> +    /* IIC controllers */
> +    dev = sysbus_create_simple(TYPE_PPC4xx_I2C, 0x4ef600700, uic[0][2]);
> +    i2c[0] = PPC4xx_I2C(dev);
> +    object_property_set_bool(OBJECT(dev), true, "realized", NULL);
> +    smbus_eeprom_init(i2c[0]->bus, 8, smbus_eeprom_buf, smbus_eeprom_size);
> +    g_free(smbus_eeprom_buf);
> +
> +    dev = sysbus_create_simple(TYPE_PPC4xx_I2C, 0x4ef600800, uic[0][3]);
> +    i2c[1] = PPC4xx_I2C(dev);
> +
> +    /* External bus controller */
> +    ppc405_ebc_init(env);
> +
> +    /* CPR */
> +    ppc4xx_cpr_init(env);
> +
> +    /* PLB to AHB bridge */
> +    ppc4xx_ahb_init(env);
> +
> +    /* System DCRs */
> +    ppc4xx_sdr_init(env);
> +
> +    /* MAL */
> +    ppc4xx_mal_init(env, 4, 16, &uic[2][3]);
> +
> +    /* 256K of L2 cache as memory */
> +    ppc4xx_l2sram_init(env);
> +    /* FIXME: remove this after fixing l2sram mapping in ppc440_uc.c? */
> +    memory_region_init_ram(l2cache_ram, NULL, "ppc440.l2cache_ram", 256 << 10,
> +                           &error_abort);
> +    memory_region_add_subregion(address_space_mem, 0x400000000LL, l2cache_ram);
> +
> +    /* USB */
> +    sysbus_create_simple(TYPE_PPC4xx_EHCI, 0x4bffd0400, uic[2][29]);
> +    dev = qdev_create(NULL, "sysbus-ohci");
> +    qdev_prop_set_string(dev, "masterbus", "usb-bus.0");
> +    qdev_prop_set_uint32(dev, "num-ports", 6);
> +    qdev_init_nofail(dev);
> +    sbdev = SYS_BUS_DEVICE(dev);
> +    sysbus_mmio_map(sbdev, 0, 0x4bffd0000);
> +    sysbus_connect_irq(sbdev, 0, uic[2][30]);
> +    usb_create_simple(usb_bus_find(-1), "usb-kbd");
> +    usb_create_simple(usb_bus_find(-1), "usb-mouse");
> +
> +    /* PCI bus */
> +    ppc460ex_pcie_init(env);
> +    /* FIXME: is this correct? */
> +    dev = sysbus_create_varargs("ppc440-pcix-host", 0xc0ec00000,
> +                                uic[1][0], uic[1][20], uic[1][21], uic[1][22],
> +                                NULL);
> +    pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0");
> +    if (!pci_bus) {
> +        error_report("couldn't create PCI controller!");
> +        exit(1);
> +    }
> +    memory_region_init_alias(isa, NULL, "isa_mmio", get_system_io(),
> +                             0, 0x10000);
> +    memory_region_add_subregion(get_system_memory(), 0xc08000000, isa);
> +
> +    /* PCI devices */
> +    pci_create_simple(pci_bus, PCI_DEVFN(6, 0), "sm501");
> +    /* SoC has a single SATA port but we don't emulate that yet
> +     * However, firmware and usual clients have driver for SiI311x
> +     * so add one for convenience by default */
> +    if (defaults_enabled()) {
> +        pci_create_simple(pci_bus, -1, "sii3112");
> +    }
> +
> +    /* SoC has 4 UARTs
> +     * but board has only one wired and two are present in fdt */
> +    if (serial_hds[0] != NULL) {
> +        serial_mm_init(address_space_mem, 0x4ef600300, 0, uic[1][1],
> +                       PPC_SERIAL_MM_BAUDBASE, serial_hds[0],
> +                       DEVICE_BIG_ENDIAN);
> +    }
> +    if (serial_hds[1] != NULL) {
> +        serial_mm_init(address_space_mem, 0x4ef600400, 0, uic[0][1],
> +                       PPC_SERIAL_MM_BAUDBASE, serial_hds[1],
> +                       DEVICE_BIG_ENDIAN);
> +    }
> +
> +    /* Load U-Boot image. */
> +    if (!machine->kernel_filename) {
> +        success = sam460ex_load_uboot();
> +        if (success < 0) {
> +            error_report("qemu: could not load firmware");
> +            exit(1);
> +        }
> +    }
> +
> +    /* Load kernel. */
> +    if (machine->kernel_filename) {
> +        success = load_uimage(machine->kernel_filename, &entry, &loadaddr,
> +                              NULL, NULL, NULL);
> +        if (success < 0) {
> +            uint64_t elf_entry, elf_lowaddr;
> +
> +            success = load_elf(machine->kernel_filename, NULL, NULL, &elf_entry,
> +                               &elf_lowaddr, NULL, 1, PPC_ELF_MACHINE, 0, 0);
> +            entry = elf_entry;
> +            loadaddr = elf_lowaddr;
> +        }
> +        /* XXX try again as binary */
> +        if (success < 0) {
> +            error_report("qemu: could not load kernel '%s'",
> +                    machine->kernel_filename);
> +            exit(1);
> +        }
> +    }
> +
> +    /* Load initrd. */
> +    if (machine->initrd_filename) {
> +        initrd_size = load_image_targphys(machine->initrd_filename,
> +                                          RAMDISK_ADDR,
> +                                          machine->ram_size - RAMDISK_ADDR);
> +        if (initrd_size < 0) {
> +            error_report("qemu: could not load ram disk '%s' at %x",
> +                    machine->initrd_filename, RAMDISK_ADDR);
> +            exit(1);
> +        }
> +    }
> +
> +    /* If we're loading a kernel directly, we must load the device tree too. */
> +    if (machine->kernel_filename) {
> +        int dt_size;
> +
> +        dt_size = sam460ex_load_device_tree(FDT_ADDR, machine->ram_size,
> +                                    RAMDISK_ADDR, initrd_size,
> +                                    machine->kernel_cmdline);
> +        if (dt_size < 0) {
> +            error_report("couldn't load device tree");
> +            exit(1);
> +        }
> +
> +        boot_info->dt_base = FDT_ADDR;
> +        boot_info->dt_size = dt_size;
> +    }
> +
> +    boot_info->entry = entry;
> +}
> +
> +static void sam460ex_machine_init(MachineClass *mc)
> +{
> +    mc->desc = "aCube Sam460ex";
> +    mc->init = sam460ex_init;
> +    mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("460exb");
> +    mc->default_ram_size = 512 * M_BYTE;
> +}
> +
> +DEFINE_MACHINE("sam460ex", sam460ex_machine_init)
> diff --git a/pc-bios/canyonlands.dtb b/pc-bios/canyonlands.dtb
> new file mode 100644
> index 0000000000000000000000000000000000000000..9dce3443ad9578a8a4bb92ba6970cb2ae54d1ec3
> GIT binary patch
> literal 9779
> zcmc&)%a0sK8L!?oi9<HFNy5`Sc5TU6VjIuwt{+H93?z{daIgeINIuv--MzDoXS$p2
> zo_!c0mVbcch{VMQE*y{$$^~(7BqGECt*nRx5|^A17nFztLI@jvzpv`+shOR1w05MF
> zR8#fU_o(kxRo&Hd|G9_%Fy_L#G3J^v=YE0qBI-v_&!D0#zKZdo?N9v%4q8Ne!u1!>
> zDtsD!(h#P+v(YGySK}z(EAnBKCpE@c6u<HaJms&VQeF@Zv#3smoxEpJuU;yL{YypJ
> zzmzsxX_co<FWtP->7<<wuyzj8ef0>sO^@!Ap!;S^SEp4L4Xw0wM`h)a?%Q+eHd;FR
> zBZ$kfZ>#!BeM6YOVj*qMs@(eV2F8e^t*21WUN3gi>iSEo8&^87e2*B5qnv?26ZrNF
> z{KFaer+}AHDVzLvQI}B_{*5vF09*K;2Xp*S4)-+LzvfYsZKoV=>5*H;&xwbCX*b8j
> zH=}e^RC|Cd59QpL8C$}b+C@4R;mz_Ut*UX^gmIBKRWTf<mFK&Ufo>)1k5<Q79Ku)W
> zu5plv5FODAp2Cl_H(-vi5Izaq1+;IVK7*=0L05{x8atKoMPO%bChka`yAyejtFz{k
> z>U<v}A6Mryu=^|E|12tV;&ZN5`@R8~eFq!Hlypbhw+18%=^xiV^{3kRHe@}ieIJGl
> z>iw*1A7$T%Ky##h+&od9#6I$}s(tUG|D^UIj$$A8UfTI6`?&7JzB;MU6<Y2!vVJh;
> z)(=rrdXk2G!W)-|c`<erFW0rlI|8V(?Ywc>j?LR&oUejgj!*5oVYisp-YrhzXyAvS
> zdicM+&j1#khikFomeCP=hihRR#apSjY3PvBa*c3rAP@8~9oIS?%xi#`Q5Ak&BGAGC
> z*O119c5uBh4|N?A$92{E2ge&gk@s=5q9?{Y6#;FKq@9y}@~aO1d5q!Uj)&88B0#Jo
> z@w(+(294%GH1cK>x^Sa&c~F8x=Fr@QZzg)j)n3^Yz3#OR3Mnn^MYQ(3FUwf==Fn0a
> zc?jU(?ye3w9z6$6m``BjBweJoi9cy4tNN2MCXvK>Yp2Qwy>54+hR~8`Mi0;#H$S_!
> zQ0`=Yt|()!ql)ZNJc@=gBr<u1h|gr)^O?YQGgLj1L%}}i8C;G*-{2=`y|@KDqv=zJ
> zN6!|8XU`wz7WXUS;b+OMr_iS_xQ^H=FZ-;d_s5xg+#kihbSut!{msp!(>~ac|I?^q
> z=eX{Nq;aMy2(->4@ll;-<3m}DD1Ck6-UF&3>xcc<&@WL%4+yquw5cTWA<wK7oPU_2
> zD`Rb}?mgg;xrOR%o~w(VbvjSc3^-Mrwd8#c)#ggF6NjJx%tG8`zJCMaDxRK?{@3~W
> zeBiHh(y};w`z+|>O8kf?kLE=O;LkaTLccN=bR22eehQU-QF`h(8(-=q_9mmq`W5D4
> zjD>T*fVxuWWxWc5urAZ6>aK5C3a6XKj8jS6oDJe*<{Dv*_e_ojzjS!VBm14|9Mn-`
> zmEwv8p`$&6*2aJYF5w(*5`zaMqbT+1Tz!aFpMW8F9k4K=wGp)ZIERDZ%5?ApnNY-U
> zc->&1`nS(D81q)VqiFRY`Bd!vJ()V(`L&Rk6Kt>BzWS%#qtkv&%+$OX^X7FFmWKYv
> zK4YFo)qId(&A`4c#Or*Vhcb9Z=|19g62Fo*$cyUc<}j+adY#n{22e=Db&Yr>tM%HK
> z2E)tUwcNy;StyiB1ODLm08}@PBk?w?-rIjc8C6ZzWJPY@o;Wx1FF3f(m%*Wk;uzy=
> z*DY7Pi{pg1i}yuMw>EbUlBSKb<tHz-J;c98c4xlu({BejQIo6|cTRLz2Bt?5HkUjd
> z@Y>o6Aw7H^9DILsv$jWv$~A-F7O*|k!!n{78CZM4!5HtdLfz&CWZVVwcV(0od462y
> z`?DHDJs78hG~Xt1YscchEC#=a_(cg)TY8DdIP4ci(~gNh7ykp8nPp{&oVXk&y){iG
> znNRkk_VIx4b74QOtwq#F^M?E^e0~;Ld9oSz)~93<CubLNBu4RNu#d9LANFbcpWT&+
> z!hhK}=gv*=B%QmqgB+I~f^B6TO*_d0Nh8j6q~Ao!8Tl1EC%p2Q<LBX#@hA7<yR8h$
> z(HhLT`f&P~8x|*g9Ag|;^16HF^5s@<iS0YLh!#9M^yA;$n1iSG8RGv*1{9^A_pGev
> zoY?K_>7G!?3%?ylPfUGCPZ>Loo}^{vy61j5rDwJl+k2#|x~zn@Jv*|gdkR1hfa2tt
> z!8^BTl6ldM(O2}%?40xo73a7ZfR=hFtj~)<)x^Ck*MPA&KJTs6&FW~Q+gx+WqdWuP
> zwj7<#%k!LgwUzf_jJb_T(~No>BAhfLJ4#lg<myIu0|O|&?5|JY_Du0*(`J<|@>^d{
> zKeHUemlXG&zEmA$&Ow<KHh_H%An|8VWiN4W4J4y%r$6KNEMc_~U5c}QN=H!~-Wg??
> z6`VN1<dw6NH&#S@hdV*?d-C~cD*K=4DKe{p3hiFDLP^i(LeW*wo=|})WlHWx3DZ&J
> zMOmP&>@%<UjzGgEb2ibIn9*IgyMU!_V*<1{BOoxNcy_#S9WYbRpM(4QoH;fgbB-71
> z&7t=g!TjsvR>vE-S>7qC_AHn8N5)8eKDlHhxKZ!rF?45f_DF8?>~S_vJ=-hIao!J>
> zv9$g70LF*0;d<x#<hmj3=3_3>RP&}A!>PN#b*shcu<!*8aLp=w#Stj{$}~K6Z;JUA
> zzGKY!iynVGeReLCHmzFuKQg9Ak(5uJUY*HD%KRA#P*jJz=rjKm{uTNx3jYp$=8nRD
> zAQFWz%EDXt(f;3EpT1&Vx6cmK`JkT(gpcdu{m2I{Ug`mP?|VMz-Jj+I7c^~j^D!Uf
> zIC#^I9VZ{WGi8DKKz~p!<V!yI_zx-{d>xn%On#^10`o!f=pL013%o(lHLLl-m~l^%
> zeW}FtNZd)|nP+a&-T)4b&Kb<EZ91PaoK7T_KH+6ld#>P~4{~<B&68Ju90G~Zvr!${
> zXWS`+&FA@p`ejs}<4dRBz^_|?(z8EHr|wIKdM};&Bl~m@`_ldweab;BgF953WnX^H
> zbFLLwaTW#sw_OjrlSpzPnk6QU6pNsI++{3Y{hAw|ZT9T|>A<?EWPH}*7-m@fmL-|`
> zb#mLi(nr!>7OFzk12{I_?cpf4g*ft)?n&Z#4*Y&R@%}P7FkC?KjY<mVLuq4*xfgHR
> zG0}z328^W~{L2=xbW(f>7g&8^PjJC`oFvYM#l&_6o)=3wASh%Xl@9TWK0Au1XJUDJ
> zUkM*SmOY60F)DSP7t5y|u7q8B?qNs@XC<C{K4aw<nn4`>HH+h1#L@0q9AV;UH~W5m
> z*q8muvla0lbbinWw5QFFWdN)w$Pebmq5N3JAgiArJqORtk9{Cn_E8VzhlmFPEtT=g
> z>3torE$2J#THgoHJyh~yhC^$eu_CT~M1D|1#>y|6A9`N;ILf2k=TT?*2ouM<3HEJ%
> z*sm9(I_te;-^AThz18h3=<FS)dtm^fesN%zg>y2G2W+XZ^CrhJ&tif)L|@?%DNq#N
> ze);7oSl1Ns5I6OlL7h47c;y*Y{fM~^omnDyLO*q1-ShlT8O%dQo0Tx1HQ85x^L>Oc
> z=O&)MQ9Nl_pE(~TNtM=h7^lNwZO+%(oz(S5MS|PCxEPiA??E5;|4CehxCcq|#^|G4
> zr|or(y(;Lqwri4fJB!ns&0d+BDjk@3Sj4x(%_{xDIL+fd(`2Kxk3XAuLz(+HILz`i
> zq$(ykG@>+9XbV8Uxc#?+s2jyGjT=GVA~AWo+u%dSb~?0DO}T~ZBUm=?-wuWz39~%G
> zxk1Zm!g-HS{MEv>C&T$@oa0h33CDTX0E=nDq<}?rgE{+qri$_b{%DhrM`44{anQs9
> zl>)8oa1@p1JU<lJAfZ<qf_XH8gnpFY4tKJo*)qeZ&ydBH9jw!)$?`#MwzH}kM?<k8
> z9#;$@KRTp|;S06zw5<r<O7N16V1a>e&@Mv^KE#DKrqXpv^9Gn0r?v%m5mV@9LkP@f
> zwpmyJTob^@goA95A|QJq^Uii)wtbg&(^`P8;xv5abqIEKm=<LDc3L%XKAerv6|v!H
> zp6<8-3>Rf=XsC)Pt85hE-!j9f8l(`=FUENSx8_N)Q=2r8umVDCA>mfRr2y}{0QSeV
> k?Rpu2fWdXRmM)8`G5p5QL^otl@NGppf}g}V#(a(WKOpmTga7~l
> 
> literal 0
> HcmV?d00001
> 
> diff --git a/pc-bios/canyonlands.dts b/pc-bios/canyonlands.dts
> new file mode 100644
> index 0000000..0d6ac92
> --- /dev/null
> +++ b/pc-bios/canyonlands.dts
> @@ -0,0 +1,566 @@
> +/*
> + * Device Tree Source for AMCC Canyonlands (460EX)
> + *
> + * Copyright 2008-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2.  This program is licensed "as is" without
> + * any warranty of any kind, whether express or implied.
> + */
> +
> +/dts-v1/;
> +
> +/ {
> +	#address-cells = <2>;
> +	#size-cells = <1>;
> +	model = "amcc,canyonlands";
> +	compatible = "amcc,canyonlands";
> +	dcr-parent = <&{/cpus/cpu@0}>;
> +
> +	aliases {
> +		ethernet0 = &EMAC0;
> +		ethernet1 = &EMAC1;
> +		serial0 = &UART0;
> +		serial1 = &UART1;
> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu@0 {
> +			device_type = "cpu";
> +			model = "PowerPC,460EX";
> +			reg = <0x00000000>;
> +			clock-frequency = <0>; /* Filled in by U-Boot */
> +			timebase-frequency = <0>; /* Filled in by U-Boot */
> +			i-cache-line-size = <32>;
> +			d-cache-line-size = <32>;
> +			i-cache-size = <32768>;
> +			d-cache-size = <32768>;
> +			dcr-controller;
> +			dcr-access-method = "native";
> +			next-level-cache = <&L2C0>;
> +		};
> +	};
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
> +	};
> +
> +	UIC0: interrupt-controller0 {
> +		compatible = "ibm,uic-460ex","ibm,uic";
> +		interrupt-controller;
> +		cell-index = <0>;
> +		dcr-reg = <0x0c0 0x009>;
> +		#address-cells = <0>;
> +		#size-cells = <0>;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	UIC1: interrupt-controller1 {
> +		compatible = "ibm,uic-460ex","ibm,uic";
> +		interrupt-controller;
> +		cell-index = <1>;
> +		dcr-reg = <0x0d0 0x009>;
> +		#address-cells = <0>;
> +		#size-cells = <0>;
> +		#interrupt-cells = <2>;
> +		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
> +		interrupt-parent = <&UIC0>;
> +	};
> +
> +	UIC2: interrupt-controller2 {
> +		compatible = "ibm,uic-460ex","ibm,uic";
> +		interrupt-controller;
> +		cell-index = <2>;
> +		dcr-reg = <0x0e0 0x009>;
> +		#address-cells = <0>;
> +		#size-cells = <0>;
> +		#interrupt-cells = <2>;
> +		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
> +		interrupt-parent = <&UIC0>;
> +	};
> +
> +	UIC3: interrupt-controller3 {
> +		compatible = "ibm,uic-460ex","ibm,uic";
> +		interrupt-controller;
> +		cell-index = <3>;
> +		dcr-reg = <0x0f0 0x009>;
> +		#address-cells = <0>;
> +		#size-cells = <0>;
> +		#interrupt-cells = <2>;
> +		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
> +		interrupt-parent = <&UIC0>;
> +	};
> +
> +	SDR0: sdr {
> +		compatible = "ibm,sdr-460ex";
> +		dcr-reg = <0x00e 0x002>;
> +	};
> +
> +	CPR0: cpr {
> +		compatible = "ibm,cpr-460ex";
> +		dcr-reg = <0x00c 0x002>;
> +	};
> +
> +	CPM0: cpm {
> +		compatible = "ibm,cpm";
> +		dcr-access-method = "native";
> +		dcr-reg = <0x160 0x003>;
> +		unused-units = <0x00000100>;
> +		idle-doze = <0x02000000>;
> +		standby = <0xfeff791d>;
> +	};
> +
> +	L2C0: l2c {
> +		compatible = "ibm,l2-cache-460ex", "ibm,l2-cache";
> +		dcr-reg = <0x020 0x008		/* Internal SRAM DCR's */
> +			   0x030 0x008>;	/* L2 cache DCR's */
> +		cache-line-size = <32>;		/* 32 bytes */
> +		cache-size = <262144>;		/* L2, 256K */
> +		interrupt-parent = <&UIC1>;
> +		interrupts = <11 1>;
> +	};
> +
> +	plb {
> +		compatible = "ibm,plb-460ex", "ibm,plb4";
> +		#address-cells = <2>;
> +		#size-cells = <1>;
> +		ranges;
> +		clock-frequency = <0>; /* Filled in by U-Boot */
> +
> +		SDRAM0: sdram {
> +			compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
> +			dcr-reg = <0x010 0x002>;
> +		};
> +
> +		CRYPTO: crypto@180000 {
> +			compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto";
> +			reg = <4 0x00180000 0x80400>;
> +			interrupt-parent = <&UIC0>;
> +			interrupts = <0x1d 0x4>;
> +		};
> +
> +		HWRNG: hwrng@110000 {
> +			compatible = "amcc,ppc460ex-rng", "ppc4xx-rng";
> +			reg = <4 0x00110000 0x50>;
> +		};
> +
> +		MAL0: mcmal {
> +			compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
> +			dcr-reg = <0x180 0x062>;
> +			num-tx-chans = <2>;
> +			num-rx-chans = <16>;
> +			#address-cells = <0>;
> +			#size-cells = <0>;
> +			interrupt-parent = <&UIC2>;
> +			interrupts = <	/*TXEOB*/ 0x6 0x4
> +					/*RXEOB*/ 0x7 0x4
> +					/*SERR*/  0x3 0x4
> +					/*TXDE*/  0x4 0x4
> +					/*RXDE*/  0x5 0x4>;
> +		};
> +
> +		USB0: ehci@bffd0400 {
> +			compatible = "ibm,usb-ehci-460ex", "usb-ehci";
> +			interrupt-parent = <&UIC2>;
> +			interrupts = <0x1d 4>;
> +			reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>;
> +		};
> +
> +		USB1: usb@bffd0000 {
> +			compatible = "ohci-le";
> +			reg = <4 0xbffd0000 0x60>;
> +			interrupt-parent = <&UIC2>;
> +			interrupts = <0x1e 4>;
> +		};
> +
> +		USBOTG0: usbotg@bff80000 {
> +			compatible = "amcc,dwc-otg";
> +			reg = <0x4 0xbff80000 0x10000>;
> +			interrupt-parent = <&USBOTG0>;
> +			#interrupt-cells = <1>;
> +			#address-cells = <0>;
> +			#size-cells = <0>;
> +			interrupts = <0x0 0x1 0x2>;
> +			interrupt-map = </* USB-OTG */ 0x0 &UIC2 0x1c 0x4
> +					 /* HIGH-POWER */ 0x1 &UIC1 0x1a 0x8
> +					 /* DMA */ 0x2 &UIC0 0xc 0x4>;
> +		};
> +
> +		AHBDMA: dma@bffd0800 {
> +			compatible = "snps,dma-spear1340";
> +			reg = <4 0xbffd0800 0x400>;
> +			interrupt-parent = <&UIC3>;
> +			interrupts = <0x5 0x4>;
> +			#dma-cells = <3>;
> +		};
> +
> +		SATA0: sata@bffd1000 {
> +			compatible = "amcc,sata-460ex";
> +			reg = <4 0xbffd1000 0x800>;
> +			interrupt-parent = <&UIC3>;
> +			interrupts = <0x0 0x4>;
> +			dmas = <&AHBDMA 0 1 0>;
> +			dma-names = "sata-dma";
> +		};
> +
> +		POB0: opb {
> +			compatible = "ibm,opb-460ex", "ibm,opb";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
> +			clock-frequency = <0>; /* Filled in by U-Boot */
> +
> +			EBC0: ebc {
> +				compatible = "ibm,ebc-460ex", "ibm,ebc";
> +				dcr-reg = <0x012 0x002>;
> +				#address-cells = <2>;
> +				#size-cells = <1>;
> +				clock-frequency = <0>; /* Filled in by U-Boot */
> +				/* ranges property is supplied by U-Boot */
> +				interrupts = <0x6 0x4>;
> +				interrupt-parent = <&UIC1>;
> +
> +				nor_flash@0,0 {
> +					compatible = "amd,s29gl512n", "cfi-flash";
> +					bank-width = <2>;
> +					reg = <0x00000000 0x00000000 0x04000000>;
> +					#address-cells = <1>;
> +					#size-cells = <1>;
> +					partition@0 {
> +						label = "kernel";
> +						reg = <0x00000000 0x001e0000>;
> +					};
> +					partition@1e0000 {
> +						label = "dtb";
> +						reg = <0x001e0000 0x00020000>;
> +					};
> +					partition@200000 {
> +						label = "ramdisk";
> +						reg = <0x00200000 0x01400000>;
> +					};
> +					partition@1600000 {
> +						label = "jffs2";
> +						reg = <0x01600000 0x00400000>;
> +					};
> +					partition@1a00000 {
> +						label = "user";
> +						reg = <0x01a00000 0x02560000>;
> +					};
> +					partition@3f60000 {
> +						label = "env";
> +						reg = <0x03f60000 0x00040000>;
> +					};
> +					partition@3fa0000 {
> +						label = "u-boot";
> +						reg = <0x03fa0000 0x00060000>;
> +					};
> +				};
> +
> +				cpld@2,0 {
> +					compatible = "amcc,ppc460ex-bcsr";
> +					reg = <2 0x0 0x9>;
> +				};
> +
> +				ndfc@3,0 {
> +					compatible = "ibm,ndfc";
> +					reg = <0x00000003 0x00000000 0x00002000>;
> +					ccr = <0x00001000>;
> +					bank-settings = <0x80002222>;
> +					#address-cells = <1>;
> +					#size-cells = <1>;
> +
> +					nand {
> +						#address-cells = <1>;
> +						#size-cells = <1>;
> +
> +						partition@0 {
> +							label = "u-boot";
> +							reg = <0x00000000 0x00100000>;
> +						};
> +						partition@100000 {
> +							label = "user";
> +							reg = <0x00000000 0x03f00000>;
> +						};
> +					};
> +				};
> +			};
> +
> +			UART0: serial@ef600300 {
> +				device_type = "serial";
> +				compatible = "ns16550";
> +				reg = <0xef600300 0x00000008>;
> +				virtual-reg = <0xef600300>;
> +				clock-frequency = <0>; /* Filled in by U-Boot */
> +				current-speed = <0>; /* Filled in by U-Boot */
> +				interrupt-parent = <&UIC1>;
> +				interrupts = <0x1 0x4>;
> +			};
> +
> +			UART1: serial@ef600400 {
> +				device_type = "serial";
> +				compatible = "ns16550";
> +				reg = <0xef600400 0x00000008>;
> +				virtual-reg = <0xef600400>;
> +				clock-frequency = <0>; /* Filled in by U-Boot */
> +				current-speed = <0>; /* Filled in by U-Boot */
> +				interrupt-parent = <&UIC0>;
> +				interrupts = <0x1 0x4>;
> +			};
> +
> +			IIC0: i2c@ef600700 {
> +				compatible = "ibm,iic-460ex", "ibm,iic";
> +				reg = <0xef600700 0x00000014>;
> +				interrupt-parent = <&UIC0>;
> +				interrupts = <0x2 0x4>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +                                rtc@68 {
> +                                        compatible = "st,m41t80";
> +                                        reg = <0x68>;
> +					interrupt-parent = <&UIC2>;
> +					interrupts = <0x19 0x8>;
> +                                };
> +                                sttm@48 {
> +                                        compatible = "ad,ad7414";
> +                                        reg = <0x48>;
> +					interrupt-parent = <&UIC1>;
> +					interrupts = <0x14 0x8>;
> +                                };
> +			};
> +
> +			IIC1: i2c@ef600800 {
> +				compatible = "ibm,iic-460ex", "ibm,iic";
> +				reg = <0xef600800 0x00000014>;
> +				interrupt-parent = <&UIC0>;
> +				interrupts = <0x3 0x4>;
> +			};
> +
> +			GPIO0: gpio@ef600b00 {
> +				compatible = "ibm,ppc4xx-gpio";
> +				reg = <0xef600b00 0x00000048>;
> +				gpio-controller;
> +			};
> +
> +			ZMII0: emac-zmii@ef600d00 {
> +				compatible = "ibm,zmii-460ex", "ibm,zmii";
> +				reg = <0xef600d00 0x0000000c>;
> +			};
> +
> +			RGMII0: emac-rgmii@ef601500 {
> +				compatible = "ibm,rgmii-460ex", "ibm,rgmii";
> +				reg = <0xef601500 0x00000008>;
> +				has-mdio;
> +			};
> +
> +			TAH0: emac-tah@ef601350 {
> +				compatible = "ibm,tah-460ex", "ibm,tah";
> +				reg = <0xef601350 0x00000030>;
> +			};
> +
> +			TAH1: emac-tah@ef601450 {
> +				compatible = "ibm,tah-460ex", "ibm,tah";
> +				reg = <0xef601450 0x00000030>;
> +			};
> +
> +			EMAC0: ethernet@ef600e00 {
> +				device_type = "network";
> +				compatible = "ibm,emac-460ex", "ibm,emac4sync";
> +				interrupt-parent = <&EMAC0>;
> +				interrupts = <0x0 0x1>;
> +				#interrupt-cells = <1>;
> +				#address-cells = <0>;
> +				#size-cells = <0>;
> +				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
> +						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
> +				reg = <0xef600e00 0x000000c4>;
> +				local-mac-address = [000000000000]; /* Filled in by U-Boot */
> +				mal-device = <&MAL0>;
> +				mal-tx-channel = <0>;
> +				mal-rx-channel = <0>;
> +				cell-index = <0>;
> +				max-frame-size = <9000>;
> +				rx-fifo-size = <4096>;
> +				tx-fifo-size = <2048>;
> +				rx-fifo-size-gige = <16384>;
> +				phy-mode = "rgmii";
> +				phy-map = <0x00000000>;
> +				rgmii-device = <&RGMII0>;
> +				rgmii-channel = <0>;
> +				tah-device = <&TAH0>;
> +				tah-channel = <0>;
> +				has-inverted-stacr-oc;
> +				has-new-stacr-staopc;
> +			};
> +
> +			EMAC1: ethernet@ef600f00 {
> +				device_type = "network";
> +				compatible = "ibm,emac-460ex", "ibm,emac4sync";
> +				interrupt-parent = <&EMAC1>;
> +				interrupts = <0x0 0x1>;
> +				#interrupt-cells = <1>;
> +				#address-cells = <0>;
> +				#size-cells = <0>;
> +				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
> +						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
> +				reg = <0xef600f00 0x000000c4>;
> +				local-mac-address = [000000000000]; /* Filled in by U-Boot */
> +				mal-device = <&MAL0>;
> +				mal-tx-channel = <1>;
> +				mal-rx-channel = <8>;
> +				cell-index = <1>;
> +				max-frame-size = <9000>;
> +				rx-fifo-size = <4096>;
> +				tx-fifo-size = <2048>;
> +				rx-fifo-size-gige = <16384>;
> +				phy-mode = "rgmii";
> +				phy-map = <0x00000000>;
> +				rgmii-device = <&RGMII0>;
> +				rgmii-channel = <1>;
> +				tah-device = <&TAH1>;
> +				tah-channel = <1>;
> +				has-inverted-stacr-oc;
> +				has-new-stacr-staopc;
> +				mdio-device = <&EMAC0>;
> +			};
> +		};
> +
> +		PCIX0: pci@c0ec00000 {
> +			device_type = "pci";
> +			#interrupt-cells = <1>;
> +			#size-cells = <2>;
> +			#address-cells = <3>;
> +			compatible = "ibm,plb-pcix-460ex", "ibm,plb-pcix";
> +			primary;
> +			large-inbound-windows;
> +			enable-msi-hole;
> +			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
> +			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
> +			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
> +			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
> +			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
> +
> +			/* Outbound ranges, one memory and one IO,
> +			 * later cannot be changed
> +			 */
> +			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
> +				  0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000
> +				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
> +
> +			/* Inbound 2GB range starting at 0 */
> +			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
> +
> +			/* This drives busses 0 to 0x3f */
> +			bus-range = <0x0 0x3f>;
> +
> +			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
> +			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
> +			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
> +		};
> +
> +		PCIE0: pciex@d00000000 {
> +			device_type = "pci";
> +			#interrupt-cells = <1>;
> +			#size-cells = <2>;
> +			#address-cells = <3>;
> +			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
> +			primary;
> +			port = <0x0>; /* port number */
> +			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
> +			       0x0000000c 0x08010000 0x00001000>;	/* Registers */
> +			dcr-reg = <0x100 0x020>;
> +			sdr-base = <0x300>;
> +
> +			/* Outbound ranges, one memory and one IO,
> +			 * later cannot be changed
> +			 */
> +			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
> +				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
> +				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
> +
> +			/* Inbound 2GB range starting at 0 */
> +			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
> +
> +			/* This drives busses 40 to 0x7f */
> +			bus-range = <0x40 0x7f>;
> +
> +			/* Legacy interrupts (note the weird polarity, the bridge seems
> +			 * to invert PCIe legacy interrupts).
> +			 * We are de-swizzling here because the numbers are actually for
> +			 * port of the root complex virtual P2P bridge. But I want
> +			 * to avoid putting a node for it in the tree, so the numbers
> +			 * below are basically de-swizzled numbers.
> +			 * The real slot is on idsel 0, so the swizzling is 1:1
> +			 */
> +			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> +			interrupt-map = <
> +				0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
> +				0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
> +				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
> +				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
> +		};
> +
> +		PCIE1: pciex@d20000000 {
> +			device_type = "pci";
> +			#interrupt-cells = <1>;
> +			#size-cells = <2>;
> +			#address-cells = <3>;
> +			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
> +			primary;
> +			port = <0x1>; /* port number */
> +			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
> +			       0x0000000c 0x08011000 0x00001000>;	/* Registers */
> +			dcr-reg = <0x120 0x020>;
> +			sdr-base = <0x340>;
> +
> +			/* Outbound ranges, one memory and one IO,
> +			 * later cannot be changed
> +			 */
> +			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
> +				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000
> +				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
> +
> +			/* Inbound 2GB range starting at 0 */
> +			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
> +
> +			/* This drives busses 80 to 0xbf */
> +			bus-range = <0x80 0xbf>;
> +
> +			/* Legacy interrupts (note the weird polarity, the bridge seems
> +			 * to invert PCIe legacy interrupts).
> +			 * We are de-swizzling here because the numbers are actually for
> +			 * port of the root complex virtual P2P bridge. But I want
> +			 * to avoid putting a node for it in the tree, so the numbers
> +			 * below are basically de-swizzled numbers.
> +			 * The real slot is on idsel 0, so the swizzling is 1:1
> +			 */
> +			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> +			interrupt-map = <
> +				0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
> +				0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
> +				0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
> +				0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
> +		};
> +
> +		MSI: ppc4xx-msi@C10000000 {
> +			compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
> +			reg = < 0xC 0x10000000 0x100>;
> +			sdr-base = <0x36C>;
> +			msi-data = <0x00000000>;
> +			msi-mask = <0x44440000>;
> +			interrupt-count = <3>;
> +			interrupts = <0 1 2 3>;
> +			interrupt-parent = <&UIC3>;
> +			#interrupt-cells = <1>;
> +			#address-cells = <0>;
> +			#size-cells = <0>;
> +			interrupt-map = <0 &UIC3 0x18 1
> +					1 &UIC3 0x19 1
> +					2 &UIC3 0x1A 1
> +					3 &UIC3 0x1B 1>;
> +		};
> +	};
> +};

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [Qemu-devel] [PATCH v3 2/2] ppc: Add aCube Sam460ex board
  2018-02-20  2:40   ` David Gibson
@ 2018-02-20 10:09     ` BALATON Zoltan
  2018-02-20 10:13       ` Alexander Graf
  0 siblings, 1 reply; 9+ messages in thread
From: BALATON Zoltan @ 2018-02-20 10:09 UTC (permalink / raw)
  To: David Gibson; +Cc: qemu-devel, qemu-ppc, Alexander Graf, Francois Revol

On Tue, 20 Feb 2018, David Gibson wrote:
> On Mon, Feb 19, 2018 at 11:34:25AM +0100, BALATON Zoltan wrote:
> 1;5002;0c> Add emulation of aCube Sam460ex board based on AMCC 460EX embedded SoC.
>> This is not a complete implementation yet with a lot of components
>> still missing but enough for the U-Boot firmware to start and to boot
>> a Linux kernel or AROS.
>>
>> Signed-off-by: François Revol <revol@free.fr>
>> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
>
> I'm not thrilled with having a machine type that can't be used without
> extracting a bootloader image from somewhere, but from the other
> thread that's not easy to fix.

This is not meant to be like that and I'd like to also submit the u-boot 
image once we figure out how to do it. Especially because the boot loader 
one can extract from the updater is buggy but here's a fixed binary that 
works here: http://zero.eik.bme.hu/~balaton/qemu/

U-Boot is GPL so we would need to include the source as well (the README 
in the link above contain the source URL and the patches needed are there 
as well). If there's no easy way to host it in the QEMU repo I could put 
it in my own git repo and submit a patch to use that as a submodule if 
that's acceptable. It seems there are some firmware images that reference 
external git repos already but not sure what's the preferred way.

> Since we have dtc in a submodule, there's really no reason we should
> be including .dtb files as well as .dts files, we should build them
> ourselves.  But fixing that isn't really in scope for this patch.

I think there are already make rules to build a dtb from dts so it may be 
possible to build these if we can add them as a dependency somewhere. 
However a normal make does not build dtc for me from the submodule so I'm 
not sure it would work.

> So, applied.

Thank you,
BALATON Zoltan

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [Qemu-devel] [PATCH v3 2/2] ppc: Add aCube Sam460ex board
  2018-02-20 10:09     ` BALATON Zoltan
@ 2018-02-20 10:13       ` Alexander Graf
  2018-02-20 11:16         ` BALATON Zoltan
  0 siblings, 1 reply; 9+ messages in thread
From: Alexander Graf @ 2018-02-20 10:13 UTC (permalink / raw)
  To: BALATON Zoltan, David Gibson; +Cc: qemu-devel, qemu-ppc, Francois Revol

On 02/20/2018 11:09 AM, BALATON Zoltan wrote:
> On Tue, 20 Feb 2018, David Gibson wrote:
>> On Mon, Feb 19, 2018 at 11:34:25AM +0100, BALATON Zoltan wrote:
>> 1;5002;0c> Add emulation of aCube Sam460ex board based on AMCC 460EX 
>> embedded SoC.
>>> This is not a complete implementation yet with a lot of components
>>> still missing but enough for the U-Boot firmware to start and to boot
>>> a Linux kernel or AROS.
>>>
>>> Signed-off-by: François Revol <revol@free.fr>
>>> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
>>
>> I'm not thrilled with having a machine type that can't be used without
>> extracting a bootloader image from somewhere, but from the other
>> thread that's not easy to fix.
>
> This is not meant to be like that and I'd like to also submit the 
> u-boot image once we figure out how to do it. Especially because the 
> boot loader one can extract from the updater is buggy but here's a 
> fixed binary that works here: http://zero.eik.bme.hu/~balaton/qemu/
>
> U-Boot is GPL so we would need to include the source as well (the 
> README in the link above contain the source URL and the patches needed 
> are there as well). If there's no easy way to host it in the QEMU repo 
> I could put it in my own git repo and submit a patch to use that as a 
> submodule if that's acceptable. It seems there are some firmware 
> images that reference external git repos already but not sure what's 
> the preferred way.

IMHO the preferred way would be to integrate sam460ex support in 
upstream U-Boot and just build it from there. We already mirror U-Boot 
on git.qemu.org and package up that tree, so packaging up one more 
target from there would be trivial.


Alex

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [Qemu-devel] [PATCH v3 2/2] ppc: Add aCube Sam460ex board
  2018-02-20 10:13       ` Alexander Graf
@ 2018-02-20 11:16         ` BALATON Zoltan
  2018-02-20 11:31           ` [Qemu-devel] [Qemu-ppc] " Thomas Huth
  0 siblings, 1 reply; 9+ messages in thread
From: BALATON Zoltan @ 2018-02-20 11:16 UTC (permalink / raw)
  To: Alexander Graf; +Cc: David Gibson, qemu-devel, qemu-ppc, Francois Revol

On Tue, 20 Feb 2018, Alexander Graf wrote:
> On 02/20/2018 11:09 AM, BALATON Zoltan wrote:
>> On Tue, 20 Feb 2018, David Gibson wrote:
>>> On Mon, Feb 19, 2018 at 11:34:25AM +0100, BALATON Zoltan wrote:
>>> 1;5002;0c> Add emulation of aCube Sam460ex board based on AMCC 460EX 
>>> embedded SoC.
>>>> This is not a complete implementation yet with a lot of components
>>>> still missing but enough for the U-Boot firmware to start and to boot
>>>> a Linux kernel or AROS.
>>>> 
>>>> Signed-off-by: François Revol <revol@free.fr>
>>>> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
>>> 
>>> I'm not thrilled with having a machine type that can't be used without
>>> extracting a bootloader image from somewhere, but from the other
>>> thread that's not easy to fix.
>> 
>> This is not meant to be like that and I'd like to also submit the u-boot 
>> image once we figure out how to do it. Especially because the boot loader 
>> one can extract from the updater is buggy but here's a fixed binary that 
>> works here: http://zero.eik.bme.hu/~balaton/qemu/
>> 
>> U-Boot is GPL so we would need to include the source as well (the README in 
>> the link above contain the source URL and the patches needed are there as 
>> well). If there's no easy way to host it in the QEMU repo I could put it in 
>> my own git repo and submit a patch to use that as a submodule if that's 
>> acceptable. It seems there are some firmware images that reference external 
>> git repos already but not sure what's the preferred way.
>
> IMHO the preferred way would be to integrate sam460ex support in upstream 
> U-Boot and just build it from there. We already mirror U-Boot on git.qemu.org 
> and package up that tree, so packaging up one more target from there would be 
> trivial.

As discussed in other thread that's not really feasible. Upstream U-Boot 
has removed support for this CPU and the board code was never upstreamed 
by the hardware vendor. I'm not willing to take the task of porting this 
to latest U-Boot, re-adding all necessary CPU support to latest U-Boot and 
then take on supporting all this in future versions. So it has to be a 
separate source or you'd have to downgrade U-Boot on git.qemu.org to the 
older version where the patch applies (but that's not desired as this old 
version has some bugs which are fixed in later U-Boot versions). We also 
cannot omit the vendor patches to U-Boot and use latest upstream U-Boot 
for this board because guests rely on these firmware modifications to 
boot. So I see no way to have one U-Boot version to be used by both e500 
and sam460ex even if it means adding another U-Boot source (but this 
source is fairly static, I don't expect many changes to it so it won't 
diverge more than it is now and we mainly need to add it to satisfy GPL so 
we can bundle the binary).

Regards,
BALATON Zoltan

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [Qemu-devel] [Qemu-ppc] [PATCH v3 2/2] ppc: Add aCube Sam460ex board
  2018-02-20 11:16         ` BALATON Zoltan
@ 2018-02-20 11:31           ` Thomas Huth
  2018-02-20 12:07             ` Alexander Graf
  0 siblings, 1 reply; 9+ messages in thread
From: Thomas Huth @ 2018-02-20 11:31 UTC (permalink / raw)
  To: BALATON Zoltan, Alexander Graf
  Cc: Francois Revol, qemu-ppc, qemu-devel, David Gibson

On 20.02.2018 12:16, BALATON Zoltan wrote:
> On Tue, 20 Feb 2018, Alexander Graf wrote:
>> On 02/20/2018 11:09 AM, BALATON Zoltan wrote:
>>> On Tue, 20 Feb 2018, David Gibson wrote:
>>>> On Mon, Feb 19, 2018 at 11:34:25AM +0100, BALATON Zoltan wrote:
>>>> 1;5002;0c> Add emulation of aCube Sam460ex board based on AMCC 460EX
>>>> embedded SoC.
>>>>> This is not a complete implementation yet with a lot of components
>>>>> still missing but enough for the U-Boot firmware to start and to boot
>>>>> a Linux kernel or AROS.
>>>>>
>>>>> Signed-off-by: François Revol <revol@free.fr>
>>>>> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
>>>>
>>>> I'm not thrilled with having a machine type that can't be used without
>>>> extracting a bootloader image from somewhere, but from the other
>>>> thread that's not easy to fix.
>>>
>>> This is not meant to be like that and I'd like to also submit the
>>> u-boot image once we figure out how to do it. Especially because the
>>> boot loader one can extract from the updater is buggy but here's a
>>> fixed binary that works here: http://zero.eik.bme.hu/~balaton/qemu/
>>>
>>> U-Boot is GPL so we would need to include the source as well (the
>>> README in the link above contain the source URL and the patches
>>> needed are there as well). If there's no easy way to host it in the
>>> QEMU repo I could put it in my own git repo and submit a patch to use
>>> that as a submodule if that's acceptable. It seems there are some
>>> firmware images that reference external git repos already but not
>>> sure what's the preferred way.
>>
>> IMHO the preferred way would be to integrate sam460ex support in
>> upstream U-Boot and just build it from there. We already mirror U-Boot
>> on git.qemu.org and package up that tree, so packaging up one more
>> target from there would be trivial.
> 
> As discussed in other thread that's not really feasible. Upstream U-Boot
> has removed support for this CPU and the board code was never upstreamed
> by the hardware vendor. I'm not willing to take the task of porting this
> to latest U-Boot, re-adding all necessary CPU support to latest U-Boot
> and then take on supporting all this in future versions. So it has to be
> a separate source or you'd have to downgrade U-Boot on git.qemu.org to
> the older version where the patch applies (but that's not desired as
> this old version has some bugs which are fixed in later U-Boot
> versions). We also cannot omit the vendor patches to U-Boot and use
> latest upstream U-Boot for this board because guests rely on these
> firmware modifications to boot. So I see no way to have one U-Boot
> version to be used by both e500 and sam460ex even if it means adding
> another U-Boot source (but this source is fairly static, I don't expect
> many changes to it so it won't diverge more than it is now and we mainly
> need to add it to satisfy GPL so we can bundle the binary).

Not sure, but would it maybe be possible to simply include a diff patch
file between the version of u-boot that we ship in QEMU and the version
that is required for the sam460ex in the roms/ directory?

 Thomas

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [Qemu-devel] [Qemu-ppc] [PATCH v3 2/2] ppc: Add aCube Sam460ex board
  2018-02-20 11:31           ` [Qemu-devel] [Qemu-ppc] " Thomas Huth
@ 2018-02-20 12:07             ` Alexander Graf
  0 siblings, 0 replies; 9+ messages in thread
From: Alexander Graf @ 2018-02-20 12:07 UTC (permalink / raw)
  To: Thomas Huth, BALATON Zoltan
  Cc: Francois Revol, qemu-ppc, qemu-devel, David Gibson,
	Stefan Hajnoczi

On 02/20/2018 12:31 PM, Thomas Huth wrote:
> On 20.02.2018 12:16, BALATON Zoltan wrote:
>> On Tue, 20 Feb 2018, Alexander Graf wrote:
>>> On 02/20/2018 11:09 AM, BALATON Zoltan wrote:
>>>> On Tue, 20 Feb 2018, David Gibson wrote:
>>>>> On Mon, Feb 19, 2018 at 11:34:25AM +0100, BALATON Zoltan wrote:
>>>>> 1;5002;0c> Add emulation of aCube Sam460ex board based on AMCC 460EX
>>>>> embedded SoC.
>>>>>> This is not a complete implementation yet with a lot of components
>>>>>> still missing but enough for the U-Boot firmware to start and to boot
>>>>>> a Linux kernel or AROS.
>>>>>>
>>>>>> Signed-off-by: François Revol <revol@free.fr>
>>>>>> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
>>>>> I'm not thrilled with having a machine type that can't be used without
>>>>> extracting a bootloader image from somewhere, but from the other
>>>>> thread that's not easy to fix.
>>>> This is not meant to be like that and I'd like to also submit the
>>>> u-boot image once we figure out how to do it. Especially because the
>>>> boot loader one can extract from the updater is buggy but here's a
>>>> fixed binary that works here: http://zero.eik.bme.hu/~balaton/qemu/
>>>>
>>>> U-Boot is GPL so we would need to include the source as well (the
>>>> README in the link above contain the source URL and the patches
>>>> needed are there as well). If there's no easy way to host it in the
>>>> QEMU repo I could put it in my own git repo and submit a patch to use
>>>> that as a submodule if that's acceptable. It seems there are some
>>>> firmware images that reference external git repos already but not
>>>> sure what's the preferred way.
>>> IMHO the preferred way would be to integrate sam460ex support in
>>> upstream U-Boot and just build it from there. We already mirror U-Boot
>>> on git.qemu.org and package up that tree, so packaging up one more
>>> target from there would be trivial.
>> As discussed in other thread that's not really feasible. Upstream U-Boot
>> has removed support for this CPU and the board code was never upstreamed
>> by the hardware vendor. I'm not willing to take the task of porting this
>> to latest U-Boot, re-adding all necessary CPU support to latest U-Boot
>> and then take on supporting all this in future versions. So it has to be
>> a separate source or you'd have to downgrade U-Boot on git.qemu.org to
>> the older version where the patch applies (but that's not desired as
>> this old version has some bugs which are fixed in later U-Boot
>> versions). We also cannot omit the vendor patches to U-Boot and use
>> latest upstream U-Boot for this board because guests rely on these
>> firmware modifications to boot. So I see no way to have one U-Boot
>> version to be used by both e500 and sam460ex even if it means adding
>> another U-Boot source (but this source is fairly static, I don't expect
>> many changes to it so it won't diverge more than it is now and we mainly
>> need to add it to satisfy GPL so we can bundle the binary).
> Not sure, but would it maybe be possible to simply include a diff patch
> file between the version of u-boot that we ship in QEMU and the version
> that is required for the sam460ex in the roms/ directory?

That diff would change constantly, so that's not a great option IMHO.

I guess we could just clone yet another U-Boot git tree from a random 
github page, as long as people are aware this is only for sam460ex.


Alex

^ permalink raw reply	[flat|nested] 9+ messages in thread

* [Qemu-devel] [PATCH v3 1/2] ppc440: Add emulation of plb-pcix controller found in some 440 SoCs
  2018-02-19 10:34 [Qemu-devel] [PATCH v3 0/2] Sam460ex emulation BALATON Zoltan
  2018-02-19 10:34 ` [Qemu-devel] [PATCH v3 2/2] ppc: Add aCube Sam460ex board BALATON Zoltan
@ 2018-02-19 10:34 ` BALATON Zoltan
  1 sibling, 0 replies; 9+ messages in thread
From: BALATON Zoltan @ 2018-02-19 10:34 UTC (permalink / raw)
  To: qemu-devel, qemu-ppc; +Cc: Alexander Graf, David Gibson, Francois Revol

This is the PCIX controller found in newer 440 core SoCs e.g. the
AMMC 460EX. The device tree refers to this as plb-pcix compared to
the plb-pci controller in older 440 SoCs.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
---
v3: No change, resend from v2

v2:
- Replace debug printfs with trace functions
- Fix access of low address registers

 hw/ppc/Makefile.objs |   2 +-
 hw/ppc/ppc440_pcix.c | 528 +++++++++++++++++++++++++++++++++++++++++++++++++++
 hw/ppc/trace-events  |   8 +
 3 files changed, 537 insertions(+), 1 deletion(-)
 create mode 100644 hw/ppc/ppc440_pcix.c

diff --git a/hw/ppc/Makefile.objs b/hw/ppc/Makefile.objs
index ad1928c..bddc742 100644
--- a/hw/ppc/Makefile.objs
+++ b/hw/ppc/Makefile.objs
@@ -13,7 +13,7 @@ endif
 obj-$(CONFIG_PSERIES) += spapr_rtas_ddw.o
 # PowerPC 4xx boards
 obj-y += ppc4xx_devs.o ppc405_uc.o
-obj-$(CONFIG_PPC4XX) += ppc4xx_pci.o ppc405_boards.o ppc440_bamboo.o
+obj-$(CONFIG_PPC4XX) += ppc4xx_pci.o ppc405_boards.o ppc440_bamboo.o ppc440_pcix.o
 # PReP
 obj-$(CONFIG_PREP) += prep.o
 obj-$(CONFIG_PREP) += prep_systemio.o
diff --git a/hw/ppc/ppc440_pcix.c b/hw/ppc/ppc440_pcix.c
new file mode 100644
index 0000000..ab2626a
--- /dev/null
+++ b/hw/ppc/ppc440_pcix.c
@@ -0,0 +1,528 @@
+/*
+ * Emulation of the ibm,plb-pcix PCI controller
+ * This is found in some 440 SoCs e.g. the 460EX.
+ *
+ * Copyright (c) 2016-2018 BALATON Zoltan
+ *
+ * Derived from ppc4xx_pci.c and pci-host/ppce500.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/error-report.h"
+#include "hw/hw.h"
+#include "hw/ppc/ppc.h"
+#include "hw/ppc/ppc4xx.h"
+#include "hw/pci/pci.h"
+#include "hw/pci/pci_host.h"
+#include "exec/address-spaces.h"
+#include "trace.h"
+
+struct PLBOutMap {
+    uint64_t la;
+    uint64_t pcia;
+    uint32_t sa;
+    MemoryRegion mr;
+};
+
+struct PLBInMap {
+    uint64_t sa;
+    uint64_t la;
+    MemoryRegion mr;
+};
+
+#define TYPE_PPC440_PCIX_HOST_BRIDGE "ppc440-pcix-host"
+#define PPC440_PCIX_HOST_BRIDGE(obj) \
+    OBJECT_CHECK(PPC440PCIXState, (obj), TYPE_PPC440_PCIX_HOST_BRIDGE)
+
+#define PPC440_PCIX_NR_POMS 3
+#define PPC440_PCIX_NR_PIMS 3
+
+typedef struct PPC440PCIXState {
+    PCIHostState parent_obj;
+
+    PCIDevice *dev;
+    struct PLBOutMap pom[PPC440_PCIX_NR_POMS];
+    struct PLBInMap pim[PPC440_PCIX_NR_PIMS];
+    uint32_t sts;
+    qemu_irq irq[PCI_NUM_PINS];
+    AddressSpace bm_as;
+    MemoryRegion bm;
+
+    MemoryRegion container;
+    MemoryRegion iomem;
+    MemoryRegion busmem;
+} PPC440PCIXState;
+
+#define PPC440_REG_BASE     0x80000
+#define PPC440_REG_SIZE     0xff
+
+#define PCIC0_CFGADDR       0x0
+#define PCIC0_CFGDATA       0x4
+
+#define PCIX0_POM0LAL       0x68
+#define PCIX0_POM0LAH       0x6c
+#define PCIX0_POM0SA        0x70
+#define PCIX0_POM0PCIAL     0x74
+#define PCIX0_POM0PCIAH     0x78
+#define PCIX0_POM1LAL       0x7c
+#define PCIX0_POM1LAH       0x80
+#define PCIX0_POM1SA        0x84
+#define PCIX0_POM1PCIAL     0x88
+#define PCIX0_POM1PCIAH     0x8c
+#define PCIX0_POM2SA        0x90
+
+#define PCIX0_PIM0SAL       0x98
+#define PCIX0_PIM0LAL       0x9c
+#define PCIX0_PIM0LAH       0xa0
+#define PCIX0_PIM1SA        0xa4
+#define PCIX0_PIM1LAL       0xa8
+#define PCIX0_PIM1LAH       0xac
+#define PCIX0_PIM2SAL       0xb0
+#define PCIX0_PIM2LAL       0xb4
+#define PCIX0_PIM2LAH       0xb8
+#define PCIX0_PIM0SAH       0xf8
+#define PCIX0_PIM2SAH       0xfc
+
+#define PCIX0_STS           0xe0
+
+#define PCI_ALL_SIZE        (PPC440_REG_BASE + PPC440_REG_SIZE)
+
+static void ppc440_pcix_clear_region(MemoryRegion *parent,
+                                     MemoryRegion *mem)
+{
+    if (memory_region_is_mapped(mem)) {
+        memory_region_del_subregion(parent, mem);
+        object_unparent(OBJECT(mem));
+    }
+}
+
+/* DMA mapping */
+static void ppc440_pcix_update_pim(PPC440PCIXState *s, int idx)
+{
+    MemoryRegion *mem = &s->pim[idx].mr;
+    char *name;
+    uint64_t size;
+
+    /* Before we modify anything, unmap and destroy the region */
+    ppc440_pcix_clear_region(&s->bm, mem);
+
+    if (!(s->pim[idx].sa & 1)) {
+        /* Not enabled, nothing to do */
+        return;
+    }
+
+    name = g_strdup_printf("PCI Inbound Window %d", idx);
+    size = ~(s->pim[idx].sa & ~7ULL) + 1;
+    memory_region_init_alias(mem, OBJECT(s), name, get_system_memory(),
+                             s->pim[idx].la, size);
+    memory_region_add_subregion_overlap(&s->bm, 0, mem, -1);
+    g_free(name);
+
+    trace_ppc440_pcix_update_pim(idx, size, s->pim[idx].la);
+}
+
+/* BAR mapping */
+static void ppc440_pcix_update_pom(PPC440PCIXState *s, int idx)
+{
+    MemoryRegion *mem = &s->pom[idx].mr;
+    MemoryRegion *address_space_mem = get_system_memory();
+    char *name;
+    uint32_t size;
+
+    /* Before we modify anything, unmap and destroy the region */
+    ppc440_pcix_clear_region(address_space_mem, mem);
+
+    if (!(s->pom[idx].sa & 1)) {
+        /* Not enabled, nothing to do */
+        return;
+    }
+
+    name = g_strdup_printf("PCI Outbound Window %d", idx);
+    size = ~(s->pom[idx].sa & 0xfffffffe) + 1;
+    if (!size) {
+        size = 0xffffffff;
+    }
+    memory_region_init_alias(mem, OBJECT(s), name, &s->busmem,
+                             s->pom[idx].pcia, size);
+    memory_region_add_subregion(address_space_mem, s->pom[idx].la, mem);
+    g_free(name);
+
+    trace_ppc440_pcix_update_pom(idx, size, s->pom[idx].la, s->pom[idx].pcia);
+}
+
+static void ppc440_pcix_reg_write4(void *opaque, hwaddr addr,
+                                   uint64_t val, unsigned size)
+{
+    struct PPC440PCIXState *s = opaque;
+
+    trace_ppc440_pcix_reg_read(addr, val);
+    switch (addr) {
+    case PCI_VENDOR_ID ... PCI_MAX_LAT:
+        stl_le_p(s->dev->config + addr, val);
+        break;
+
+    case PCIX0_POM0LAL:
+        s->pom[0].la &= 0xffffffff00000000ULL;
+        s->pom[0].la |= val;
+        ppc440_pcix_update_pom(s, 0);
+        break;
+    case PCIX0_POM0LAH:
+        s->pom[0].la &= 0xffffffffULL;
+        s->pom[0].la |= val << 32;
+        ppc440_pcix_update_pom(s, 0);
+        break;
+    case PCIX0_POM0SA:
+        s->pom[0].sa = val;
+        ppc440_pcix_update_pom(s, 0);
+        break;
+    case PCIX0_POM0PCIAL:
+        s->pom[0].pcia &= 0xffffffff00000000ULL;
+        s->pom[0].pcia |= val;
+        ppc440_pcix_update_pom(s, 0);
+        break;
+    case PCIX0_POM0PCIAH:
+        s->pom[0].pcia &= 0xffffffffULL;
+        s->pom[0].pcia |= val << 32;
+        ppc440_pcix_update_pom(s, 0);
+        break;
+    case PCIX0_POM1LAL:
+        s->pom[1].la &= 0xffffffff00000000ULL;
+        s->pom[1].la |= val;
+        ppc440_pcix_update_pom(s, 1);
+        break;
+    case PCIX0_POM1LAH:
+        s->pom[1].la &= 0xffffffffULL;
+        s->pom[1].la |= val << 32;
+        ppc440_pcix_update_pom(s, 1);
+        break;
+    case PCIX0_POM1SA:
+        s->pom[1].sa = val;
+        ppc440_pcix_update_pom(s, 1);
+        break;
+    case PCIX0_POM1PCIAL:
+        s->pom[1].pcia &= 0xffffffff00000000ULL;
+        s->pom[1].pcia |= val;
+        ppc440_pcix_update_pom(s, 1);
+        break;
+    case PCIX0_POM1PCIAH:
+        s->pom[1].pcia &= 0xffffffffULL;
+        s->pom[1].pcia |= val << 32;
+        ppc440_pcix_update_pom(s, 1);
+        break;
+    case PCIX0_POM2SA:
+        s->pom[2].sa = val;
+        break;
+
+    case PCIX0_PIM0SAL:
+        s->pim[0].sa &= 0xffffffff00000000ULL;
+        s->pim[0].sa |= val;
+        ppc440_pcix_update_pim(s, 0);
+        break;
+    case PCIX0_PIM0LAL:
+        s->pim[0].la &= 0xffffffff00000000ULL;
+        s->pim[0].la |= val;
+        ppc440_pcix_update_pim(s, 0);
+        break;
+    case PCIX0_PIM0LAH:
+        s->pim[0].la &= 0xffffffffULL;
+        s->pim[0].la |= val << 32;
+        ppc440_pcix_update_pim(s, 0);
+        break;
+    case PCIX0_PIM1SA:
+        s->pim[1].sa = val;
+        ppc440_pcix_update_pim(s, 1);
+        break;
+    case PCIX0_PIM1LAL:
+        s->pim[1].la &= 0xffffffff00000000ULL;
+        s->pim[1].la |= val;
+        ppc440_pcix_update_pim(s, 1);
+        break;
+    case PCIX0_PIM1LAH:
+        s->pim[1].la &= 0xffffffffULL;
+        s->pim[1].la |= val << 32;
+        ppc440_pcix_update_pim(s, 1);
+        break;
+    case PCIX0_PIM2SAL:
+        s->pim[2].sa &= 0xffffffff00000000ULL;
+        s->pim[2].sa = val;
+        ppc440_pcix_update_pim(s, 2);
+        break;
+    case PCIX0_PIM2LAL:
+        s->pim[2].la &= 0xffffffff00000000ULL;
+        s->pim[2].la |= val;
+        ppc440_pcix_update_pim(s, 2);
+        break;
+    case PCIX0_PIM2LAH:
+        s->pim[2].la &= 0xffffffffULL;
+        s->pim[2].la |= val << 32;
+        ppc440_pcix_update_pim(s, 2);
+        break;
+
+    case PCIX0_STS:
+        s->sts = val;
+        break;
+
+    case PCIX0_PIM0SAH:
+        s->pim[0].sa &= 0xffffffffULL;
+        s->pim[0].sa |= val << 32;
+        ppc440_pcix_update_pim(s, 0);
+        break;
+    case PCIX0_PIM2SAH:
+        s->pim[2].sa &= 0xffffffffULL;
+        s->pim[2].sa |= val << 32;
+        ppc440_pcix_update_pim(s, 2);
+        break;
+
+    default:
+        error_report("%s: unhandled PCI internal register 0x%lx", __func__,
+                     (unsigned long)addr);
+        break;
+    }
+}
+
+static uint64_t ppc440_pcix_reg_read4(void *opaque, hwaddr addr,
+                                     unsigned size)
+{
+    struct PPC440PCIXState *s = opaque;
+    uint32_t val;
+
+    switch (addr) {
+    case PCI_VENDOR_ID ... PCI_MAX_LAT:
+        val = ldl_le_p(s->dev->config + addr);
+        break;
+
+    case PCIX0_POM0LAL:
+        val = s->pom[0].la;
+        break;
+    case PCIX0_POM0LAH:
+        val = s->pom[0].la >> 32;
+        break;
+    case PCIX0_POM0SA:
+        val = s->pom[0].sa;
+        break;
+    case PCIX0_POM0PCIAL:
+        val = s->pom[0].pcia;
+        break;
+    case PCIX0_POM0PCIAH:
+        val = s->pom[0].pcia >> 32;
+        break;
+    case PCIX0_POM1LAL:
+        val = s->pom[1].la;
+        break;
+    case PCIX0_POM1LAH:
+        val = s->pom[1].la >> 32;
+        break;
+    case PCIX0_POM1SA:
+        val = s->pom[1].sa;
+        break;
+    case PCIX0_POM1PCIAL:
+        val = s->pom[1].pcia;
+        break;
+    case PCIX0_POM1PCIAH:
+        val = s->pom[1].pcia >> 32;
+        break;
+    case PCIX0_POM2SA:
+        val = s->pom[2].sa;
+        break;
+
+    case PCIX0_PIM0SAL:
+        val = s->pim[0].sa;
+        break;
+    case PCIX0_PIM0LAL:
+        val = s->pim[0].la;
+        break;
+    case PCIX0_PIM0LAH:
+        val = s->pim[0].la >> 32;
+        break;
+    case PCIX0_PIM1SA:
+        val = s->pim[1].sa;
+        break;
+    case PCIX0_PIM1LAL:
+        val = s->pim[1].la;
+        break;
+    case PCIX0_PIM1LAH:
+        val = s->pim[1].la >> 32;
+        break;
+    case PCIX0_PIM2SAL:
+        val = s->pim[2].sa;
+        break;
+    case PCIX0_PIM2LAL:
+        val = s->pim[2].la;
+        break;
+    case PCIX0_PIM2LAH:
+        val = s->pim[2].la >> 32;
+        break;
+
+    case PCIX0_STS:
+        val = s->sts;
+        break;
+
+    case PCIX0_PIM0SAH:
+        val = s->pim[0].sa  >> 32;
+        break;
+    case PCIX0_PIM2SAH:
+        val = s->pim[2].sa  >> 32;
+        break;
+
+    default:
+        error_report("%s: invalid PCI internal register 0x%lx", __func__,
+                     (unsigned long)addr);
+        val = 0;
+    }
+
+    trace_ppc440_pcix_reg_read(addr, val);
+    return val;
+}
+
+static const MemoryRegionOps pci_reg_ops = {
+    .read = ppc440_pcix_reg_read4,
+    .write = ppc440_pcix_reg_write4,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void ppc440_pcix_reset(DeviceState *dev)
+{
+    struct PPC440PCIXState *s = PPC440_PCIX_HOST_BRIDGE(dev);
+    int i;
+
+    for (i = 0; i < PPC440_PCIX_NR_POMS; i++) {
+        ppc440_pcix_clear_region(get_system_memory(), &s->pom[i].mr);
+    }
+    for (i = 0; i < PPC440_PCIX_NR_PIMS; i++) {
+        ppc440_pcix_clear_region(&s->bm, &s->pim[i].mr);
+    }
+    memset(s->pom, 0, sizeof(s->pom));
+    memset(s->pim, 0, sizeof(s->pim));
+    for (i = 0; i < PPC440_PCIX_NR_PIMS; i++) {
+        s->pim[i].sa = 0xffffffff00000000ULL;
+    }
+    s->sts = 0;
+}
+
+/* All pins from each slot are tied to a single board IRQ.
+ * This may need further refactoring for other boards. */
+static int ppc440_pcix_map_irq(PCIDevice *pci_dev, int irq_num)
+{
+    int slot = pci_dev->devfn >> 3;
+    trace_ppc440_pcix_map_irq(pci_dev->devfn, irq_num, slot);
+    return slot - 1;
+}
+
+static void ppc440_pcix_set_irq(void *opaque, int irq_num, int level)
+{
+    qemu_irq *pci_irqs = opaque;
+
+    trace_ppc440_pcix_set_irq(irq_num);
+    if (irq_num < 0) {
+        error_report("%s: PCI irq %d", __func__, irq_num);
+        return;
+    }
+    qemu_set_irq(pci_irqs[irq_num], level);
+}
+
+static AddressSpace *ppc440_pcix_set_iommu(PCIBus *b, void *opaque, int devfn)
+{
+    PPC440PCIXState *s = opaque;
+
+    return &s->bm_as;
+}
+
+/* The default pci_host_data_{read,write} functions in pci/pci_host.c
+ * deny access to registers without bit 31 set but our clients want
+ * this to work so we have to override these here */
+static void pci_host_data_write(void *opaque, hwaddr addr,
+                                uint64_t val, unsigned len)
+{
+    PCIHostState *s = opaque;
+    pci_data_write(s->bus, s->config_reg | (addr & 3), val, len);
+}
+
+static uint64_t pci_host_data_read(void *opaque,
+                                   hwaddr addr, unsigned len)
+{
+    PCIHostState *s = opaque;
+    uint32_t val;
+    val = pci_data_read(s->bus, s->config_reg | (addr & 3), len);
+    return val;
+}
+
+const MemoryRegionOps ppc440_pcix_host_data_ops = {
+    .read = pci_host_data_read,
+    .write = pci_host_data_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static int ppc440_pcix_initfn(SysBusDevice *dev)
+{
+    PPC440PCIXState *s;
+    PCIHostState *h;
+    int i;
+
+    h = PCI_HOST_BRIDGE(dev);
+    s = PPC440_PCIX_HOST_BRIDGE(dev);
+
+    for (i = 0; i < ARRAY_SIZE(s->irq); i++) {
+        sysbus_init_irq(dev, &s->irq[i]);
+    }
+
+    memory_region_init(&s->busmem, OBJECT(dev), "pci bus memory", UINT64_MAX);
+    h->bus = pci_register_root_bus(DEVICE(dev), NULL, ppc440_pcix_set_irq,
+                         ppc440_pcix_map_irq, s->irq, &s->busmem,
+                         get_system_io(), PCI_DEVFN(0, 0), 4, TYPE_PCI_BUS);
+
+    s->dev = pci_create_simple(h->bus, PCI_DEVFN(0, 0), "ppc4xx-host-bridge");
+
+    memory_region_init(&s->bm, OBJECT(s), "bm-ppc440-pcix", UINT64_MAX);
+    memory_region_add_subregion(&s->bm, 0x0, &s->busmem);
+    address_space_init(&s->bm_as, &s->bm, "pci-bm");
+    pci_setup_iommu(h->bus, ppc440_pcix_set_iommu, s);
+
+    memory_region_init(&s->container, OBJECT(s), "pci-container", PCI_ALL_SIZE);
+    memory_region_init_io(&h->conf_mem, OBJECT(s), &pci_host_conf_le_ops,
+                          h, "pci-conf-idx", 4);
+    memory_region_init_io(&h->data_mem, OBJECT(s), &ppc440_pcix_host_data_ops,
+                          h, "pci-conf-data", 4);
+    memory_region_init_io(&s->iomem, OBJECT(s), &pci_reg_ops, s,
+                          "pci.reg", PPC440_REG_SIZE);
+    memory_region_add_subregion(&s->container, PCIC0_CFGADDR, &h->conf_mem);
+    memory_region_add_subregion(&s->container, PCIC0_CFGDATA, &h->data_mem);
+    memory_region_add_subregion(&s->container, PPC440_REG_BASE, &s->iomem);
+    sysbus_init_mmio(dev, &s->container);
+
+    return 0;
+}
+
+static void ppc440_pcix_class_init(ObjectClass *klass, void *data)
+{
+    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    k->init = ppc440_pcix_initfn;
+    dc->reset = ppc440_pcix_reset;
+}
+
+static const TypeInfo ppc440_pcix_info = {
+    .name          = TYPE_PPC440_PCIX_HOST_BRIDGE,
+    .parent        = TYPE_PCI_HOST_BRIDGE,
+    .instance_size = sizeof(PPC440PCIXState),
+    .class_init    = ppc440_pcix_class_init,
+};
+
+static void ppc440_pcix_register_types(void)
+{
+    type_register_static(&ppc440_pcix_info);
+}
+
+type_init(ppc440_pcix_register_types)
diff --git a/hw/ppc/trace-events b/hw/ppc/trace-events
index b7c3e64..b7036eb 100644
--- a/hw/ppc/trace-events
+++ b/hw/ppc/trace-events
@@ -99,3 +99,11 @@ mac99_uninorth_read(uint64_t addr, uint64_t value) "addr=0x%" PRIx64 " val=0x%"P
 # hw/ppc/ppc4xx_pci.c
 ppc4xx_pci_map_irq(int32_t devfn, int irq_num, int slot) "devfn 0x%x irq %d -> %d"
 ppc4xx_pci_set_irq(int irq_num) "PCI irq %d"
+
+# hw/ppc/ppc440_pcix.c
+ppc440_pcix_map_irq(int32_t devfn, int irq_num, int slot) "devfn 0x%x irq %d -> %d"
+ppc440_pcix_set_irq(int irq_num) "PCI irq %d"
+ppc440_pcix_update_pim(int idx, uint64_t size, uint64_t la) "Added window %d of size=0x%" PRIx64 " to CPU=0x%" PRIx64
+ppc440_pcix_update_pom(int idx, uint32_t size, uint64_t la, uint64_t pcia) "Added window %d of size=0x%x from CPU=0x%" PRIx64 " to PCI=0x%" PRIx64
+ppc440_pcix_reg_read(hwaddr addr, uint32_t val) "addr 0x%" PRIx64 " = 0x%" PRIx32
+ppc440_pcix_reg_write(hwaddr addr, uint64_t val) "addr 0x%" PRIx64 " = 0x%" PRIx64
-- 
2.7.6

^ permalink raw reply related	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2018-02-20 12:07 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-02-19 10:34 [Qemu-devel] [PATCH v3 0/2] Sam460ex emulation BALATON Zoltan
2018-02-19 10:34 ` [Qemu-devel] [PATCH v3 2/2] ppc: Add aCube Sam460ex board BALATON Zoltan
2018-02-20  2:40   ` David Gibson
2018-02-20 10:09     ` BALATON Zoltan
2018-02-20 10:13       ` Alexander Graf
2018-02-20 11:16         ` BALATON Zoltan
2018-02-20 11:31           ` [Qemu-devel] [Qemu-ppc] " Thomas Huth
2018-02-20 12:07             ` Alexander Graf
2018-02-19 10:34 ` [Qemu-devel] [PATCH v3 1/2] ppc440: Add emulation of plb-pcix controller found in some 440 SoCs BALATON Zoltan

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.