All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jyri Sarha <jsarha@ti.com>
To: dri-devel@lists.freedesktop.org
Cc: airlied@linux.ie, Jyri Sarha <jsarha@ti.com>,
	tomi.valkeinen@ti.com, thierry.reding@gmail.com
Subject: [PATCH v2 0/2] drm/panel: Add device link in drm_panel_attach()
Date: Wed, 28 Feb 2018 13:09:28 +0200	[thread overview]
Message-ID: <cover.1519815150.git.jsarha@ti.com> (raw)

The first version of the series can be found here:
https://lists.freedesktop.org/archives/dri-devel/2018-February/166909.html

The only change is the dev_err print in drm_panel_attach() if
device_link_add() fails.

The device_link_del() is still there in drm_panel_detach(), despite
Lukas Wunner's comment[1]. In the usual (currently all) cases things
would work perfectly without the call too, because
device_links_driver_cleanup() will eventually remove all orphaned
links. However, this would cause an error in the situation where a drm
device would like to detach a panel but remain operational, since the
drm device would be unbound for no good reason if the detached panel
is later unbound.

Anyway, if somebody still comes up with an argument for dropping the
device_link_del() from drm_panel_detach(), I'll do it as things will
normally work fine either case (drm devices don't normally detach
panels and remain operational).

These older comment still apply:

The first patch could be squashed to second, but kept is separate
since I think it is correct even without the second patch.

With these patches unbinding a panel driver in use does not cause
nasty backtraces and corrupted drm core structures, but instead it
cleanly unbind the drm master device at the same time.

The only down side (currently[2]) is that the drm device does not reprobe
if the panel driver is bound again, but everything should work if the
drm master driver is bound manually.

Best regards,
Jyri

[1] https://lists.freedesktop.org/archives/dri-devel/2018-February/167047.html
[2] https://lists.freedesktop.org/archives/dri-devel/2018-February/166907.html

Jyri Sarha (2):
  drm/panel: Remove drm_panel_detach() calls from all panel drives
  drm/panel: Add device_link from panel device to drm device

 drivers/gpu/drm/drm_panel.c                          | 12 ++++++++++++
 drivers/gpu/drm/panel/panel-innolux-p079zca.c        |  1 -
 drivers/gpu/drm/panel/panel-jdi-lt070me05000.c       |  1 -
 drivers/gpu/drm/panel/panel-lvds.c                   |  1 -
 drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c |  1 -
 drivers/gpu/drm/panel/panel-seiko-43wvf1g.c          |  1 -
 drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c      |  1 -
 drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c      |  1 -
 drivers/gpu/drm/panel/panel-simple.c                 |  1 -
 drivers/gpu/drm/panel/panel-sitronix-st7789v.c       |  1 -
 include/drm/drm_panel.h                              |  1 +
 11 files changed, 13 insertions(+), 9 deletions(-)

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

             reply	other threads:[~2018-02-28 11:09 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-28 11:09 Jyri Sarha [this message]
2018-02-28 11:09 ` [PATCH v2 1/2] drm/panel: Remove drm_panel_detach() calls from all panel drives Jyri Sarha
2018-02-28 18:53   ` Thierry Reding
2018-02-28 21:31     ` Jyri Sarha
2018-03-06 10:03       ` Daniel Vetter
2018-02-28 11:09 ` [PATCH v2 2/2] drm/panel: Add device_link from panel device to drm device Jyri Sarha
2018-02-28 18:14   ` Eric Anholt
2018-03-01 17:53     ` Jyri Sarha
2018-02-28 19:32   ` Lukas Wunner
2018-02-28 19:47 ` [PATCH v2 0/2] drm/panel: Add device link in drm_panel_attach() Lukas Wunner
2018-03-01 17:42   ` Jyri Sarha

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.1519815150.git.jsarha@ti.com \
    --to=jsarha@ti.com \
    --cc=airlied@linux.ie \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=thierry.reding@gmail.com \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.