[PATCH v5 00/11] staging: iio: ad7780: move out of staging

[Renato Lui Geh <renatogeh@gmail.com>]

This series of patches contains the following:
 - Adds user input for the 'gain' and 'filter' GPIO pins for the ad778x
   family chips;
 - Missing switch default case tidy up;
 - Gain reading for the ad778x;
 - Filter reading for the ad778x;
 - Sets pattern macro values and mask for PATTERN status bits;
 - Adds ID values for the ad7170, ad7171, ad7780 and ad7781 for ID
   status bits checking;
 - Moves regulator initialization to after GPIO init to maintain
   consistency between probe and remove;
 - Copyright edits, adding SPDX identifier and new copyright holder;
 - Moves the ad7780 driver out of staging to the mainline;
 - Adds device tree binding for the ad7780 driver.

Renato Lui Geh (11):
  staging: iio: ad7780: add gain & filter gpio support
  staging: iio: ad7780: add missing switch default case
  staging: iio: ad7780: add gain reading to ad778x
  staging: iio: ad7780: add filter reading to ad778x
  staging: iio: ad7780: set pattern values and masks directly
  staging:iio:ad7780: add chip ID values and mask
  staging: iio: ad7780: move regulator to after GPIO init
  staging: iio: ad7780: add SPDX identifier
  staging: iio: ad7780: add new copyright holder
  staging: iio: ad7780: moving ad7780 out of staging
  staging: iio: ad7780: add device tree binding

Changelog:
*v3
 - SPDX and regulator init as patches
 - Renamed filter to odr and ad778x_filter to ad778x_odr_avail
 - Removed unnecessary regulator disabling
 - Removed unnecessary AD_SD_CHANNEL macro
 - Changed unsigned int to unsigned long long to avoid overflow
*v4
 - Split gain & filter patch into two, with the new commit adding only
   filter reading
 - Changed pattern values to direct values, and added pattern mask
 - Added ID values and mask
 - Added new copyright holder
 - Added device tree binding to the ad7780 driver
*v5
 - Tidy ups
 - Gain reading split from "gain & filter gpio support" commit to its
   own separate patch
 - ad778x_odr_avail moved to more appropriate patch
 - Init GPIOs in a separate function
 - Raise error when ad717x tries to perform a write operation

 .../bindings/iio/adc/adi,ad7780.txt           |  48 +++
 drivers/iio/adc/Kconfig                       |  12 +
 drivers/iio/adc/Makefile                      |   1 +
 drivers/iio/adc/ad7780.c                      | 376 ++++++++++++++++++
 drivers/staging/iio/adc/Kconfig               |  13 -
 drivers/staging/iio/adc/Makefile              |   1 -
 drivers/staging/iio/adc/ad7780.c              | 277 -------------
 7 files changed, 437 insertions(+), 291 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt
 create mode 100644 drivers/iio/adc/ad7780.c
 delete mode 100644 drivers/staging/iio/adc/ad7780.c

-- 
2.21.0