From: Rahul Tanwar <rahul.tanwar@linux.intel.com>
To: u.kleine-koenig@pengutronix.de, linux-pwm@vger.kernel.org
Cc: thierry.reding@gmail.com, p.zabel@pengutronix.de,
robh+dt@kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, andriy.shevchenko@intel.com,
songjun.Wu@intel.com, cheol.yong.kim@intel.com,
qi-ming.wu@intel.com, rahul.tanwar.linux@gmail.com,
Rahul Tanwar <rahul.tanwar@linux.intel.com>
Subject: [PATCH v5 0/2] pwm: intel: Add PWM driver for a new SoC
Date: Thu, 23 Jul 2020 15:44:16 +0800 [thread overview]
Message-ID: <cover.1595489518.git.rahul.tanwar@linux.intel.com> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 2478 bytes --]
Patch 1 adds dt binding document in YAML format.
Patch 2 add PWM fan controller driver for LGM SoC.
Patch series is baselined on linux 5.8-rc5.
v5:
- Address below review concerns from Uwe Kleine-König.
* Improve comments about Limitations.
* Use return value of regmap_update_bits if container function returns
error code.
* Modify .apply op to have strict checking for fixed period supported
by PWM HW.
* Use u64 as type when use min_t for duty_cycle.
* Add reset_control_assert() in failure case in probe where it was missing
earlier.
- Remove fan specific optional properties from pwm dt binding document (Rob Herring)
v4:
- Address below review concerns from Uwe Kleine-König.
* Improve notes and limitations comments.
* Add common prefixes for all #defines.
* Modify/Improve logic in .apply & .get_state ops as advised.
* Skip error messages in probe when error is -EPROBE_DEFER.
* Add dependencies in Kconfig (OF & HAS_IOMEM) and add select REGMAP_MMIO.
* Address other code quality related review concerns.
- Fix make dt_binding_check reported error in YAML file.
v3:
- Address below review concerns from Uwe Kleine-König.
* Remove fan rpm calibration task from the driver.
* Modify apply op as per the review feedback.
* Add roundup & round down where necessary.
* Address other misc code quality related review concerns.
* Use devm_reset_control_get_exclusive(). (Philipp Zabel)
* Improve dt binding document.
v2:
- Address below review concerns from Uwe Kleine-König.
* Add notes and limitations about PWM HW.
* Rename all functions and structure to lgm_pwm_*
* Readjust space aligninment in structure fields to single space.
* Switch to using apply instead of config/enable/disable.
* Address other code quality related concerns.
* Rebase to 5.8-rc1.
- Address review concerns in dt binding YAML from Rob Herring.
v1:
- Initial version.
Rahul Tanwar (2):
Add DT bindings YAML schema for PWM fan controller of LGM SoC
Add PWM fan controller driver for LGM SoC
.../devicetree/bindings/pwm/intel,lgm-pwm.yaml | 40 +++
drivers/pwm/Kconfig | 11 +
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-intel-lgm.c | 269 +++++++++++++++++++++
4 files changed, 321 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/intel,lgm-pwm.yaml
create mode 100644 drivers/pwm/pwm-intel-lgm.c
--
2.11.0
next reply other threads:[~2020-07-23 7:44 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-23 7:44 Rahul Tanwar [this message]
[not found] ` <cover.1595489518.git.rahul.tanwar-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2020-07-23 7:44 ` [PATCH v5 1/2] Add DT bindings YAML schema for PWM fan controller of LGM SoC Rahul Tanwar
2020-07-23 7:44 ` Rahul Tanwar
[not found] ` <4e975206fcbddedc746e8d39b620336d5fab8b14.1595489518.git.rahul.tanwar-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2020-07-23 15:42 ` Rob Herring
2020-07-23 15:42 ` Rob Herring
2020-07-23 7:44 ` [PATCH v5 2/2] Add PWM fan controller driver for " Rahul Tanwar
2020-07-23 7:44 ` Rahul Tanwar
2020-07-23 16:15 ` Uwe Kleine-König
2020-07-27 6:04 ` Tanwar, Rahul
2020-07-27 7:01 ` Uwe Kleine-König
2020-07-27 7:30 ` Tanwar, Rahul
2020-07-27 20:00 ` Uwe Kleine-König
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1595489518.git.rahul.tanwar@linux.intel.com \
--to=rahul.tanwar@linux.intel.com \
--cc=andriy.shevchenko@intel.com \
--cc=cheol.yong.kim@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=qi-ming.wu@intel.com \
--cc=rahul.tanwar.linux@gmail.com \
--cc=robh+dt@kernel.org \
--cc=songjun.Wu@intel.com \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.