[PATCH v2 0/2] Add hwmon driver for Moortec PVT controller

[Rahul Tanwar <rahul.tanwar@linux.intel.com>]

Patch 1 adds DT bindings schema in YAML format.
Patch 2 adds driver for MR75203 PVT controller.

v2:
- Address below review concerns from Andy Shevchenko
 * Add more info in comments for clamp_val usage for clk sys cycles.
 * Add mod_devicetable.h & property.h and remove of.h
 * Remove unnecessary additional mutex lock from driver. Rely on regmap's
   internal lock.
 * Use units in timeout macros.
 * Use HZ_PER_MHZ instead of direct values.
 * Use devm_platform_ioremap_resource_byname() instead of separate calls.
 * Use device property read API instead of OF API.
- Address below review concerns from Guenter Roeck
 * Improve commit message - add hardware monitoring driver.
 * Remove unnecessary platform_set_drvdata. Instead add driver data in
   function args at one place where it is used. Fix a issue related to it.
 * Remove unnecessary NULL assignment.
- Address below review concerns from Philipp Zabel
 * Switch to devm_reset_control_get_exclusive().
 * Move reset_deassert at the last after clk_enable in probe.
- Resolve make dt_binding_check error.
- Add MODULE_LICENSE

v1:
- Initial version.


Rahul Tanwar (2):
  Add DT bindings schema for PVT controller
  Add hardware monitoring driver for Moortec MR75203 PVT controller

 .../devicetree/bindings/hwmon/moortec,mr75203.yaml |  70 +++
 drivers/hwmon/Kconfig                              |  10 +
 drivers/hwmon/Makefile                             |   1 +
 drivers/hwmon/mr75203.c                            | 605 +++++++++++++++++++++
 4 files changed, 686 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
 create mode 100644 drivers/hwmon/mr75203.c

-- 
2.11.0