All of lore.kernel.org
 help / color / mirror / Atom feed
From: Camelia Groza <camelia.groza@oss.nxp.com>
To: wd@denx.de, Shengzhou.Liu@nxp.com, priyanka.jain@nxp.com,
	Zhiqiang.Hou@nxp.com, u-boot@lists.denx.de
Cc: Camelia Groza <camelia.groza@nxp.com>
Subject: [PATCH 0/4] board: freescale: add T2080RDB rev D support
Date: Thu, 10 Jun 2021 15:39:35 +0300	[thread overview]
Message-ID: <cover.1623327658.git.camelia.groza@nxp.com> (raw)

From: Camelia Groza <camelia.groza@nxp.com>

The T2080RDB boards revision D and up have updated Aquantia PHYs on the
two 10Gbps copper ports connected to MAC1 and MAC2 (from AQ1202 to
AQR113C). The second PHY connected to MAC2 is located at a different
address on the MDIO bus compared to revision C boards. Device tree
fixups are required for both Linux and u-boot to set the correct PHY
address for the new board revisions.

The first patch in the series implements a callback that detects the
board revision based on the CPLD registers.

The second patch updates the PHY addresses in u-boot for the legacy,
non-DM, driver implementation.

The third patch adds a fixup for Linux's device tree that is called from
both DM and non-DM code paths.

The last patch corrects u-boot's device tree under DM based on a newly
introduced CONFIG_T2080RDB_REV_D build option. We are unable to use the
board_fix_fdt callback to update the device tree before relocation because
the dts is stored in flash at that point and isn't writable. Instead,
the config option is used until a more robust solution is implemented.
Defconfig targets with the config option enabled by default are added for
convenience.

Camelia Groza (4):
  board: freescale: t208xrdb: detect the board revision letter
  board: freescale: t208xrdb: add rev D support for the non-DM_ETH mode
  board: freescale: t208xrdb: add Linux fdt fixups for rev D
  board: freescale: t208xrdb: add a config option for rev D dts fixups

 arch/powerpc/dts/t2080rdb.dts            |  7 ++
 board/freescale/t208xrdb/Kconfig         |  4 +
 board/freescale/t208xrdb/eth_t208xrdb.c  | 49 ++++++++++++-
 board/freescale/t208xrdb/t208xrdb.c      | 20 ++++-
 board/freescale/t208xrdb/t208xrdb.h      |  1 +
 configs/T2080RDB_revD_NAND_defconfig     | 93 ++++++++++++++++++++++++
 configs/T2080RDB_revD_SDCARD_defconfig   | 90 +++++++++++++++++++++++
 configs/T2080RDB_revD_SPIFLASH_defconfig | 92 +++++++++++++++++++++++
 configs/T2080RDB_revD_defconfig          | 77 ++++++++++++++++++++
 include/configs/T208xRDB.h               |  8 +-
 10 files changed, 434 insertions(+), 7 deletions(-)
 create mode 100644 configs/T2080RDB_revD_NAND_defconfig
 create mode 100644 configs/T2080RDB_revD_SDCARD_defconfig
 create mode 100644 configs/T2080RDB_revD_SPIFLASH_defconfig
 create mode 100644 configs/T2080RDB_revD_defconfig

--
2.17.1


             reply	other threads:[~2021-06-10 12:40 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-10 12:39 Camelia Groza [this message]
2021-06-10 12:39 ` [PATCH 1/4] board: freescale: t208xrdb: detect the board revision letter Camelia Groza
2021-06-10 12:39 ` [PATCH 2/4] board: freescale: t208xrdb: add rev D support for the non-DM_ETH mode Camelia Groza
2021-06-10 12:39 ` [PATCH 3/4] board: freescale: t208xrdb: add Linux fdt fixups for rev D Camelia Groza
2021-06-10 12:39 ` [PATCH 4/4] board: freescale: t208xrdb: add a config option for rev D dts fixups Camelia Groza
2021-06-10 19:19 ` [PATCH 0/4] board: freescale: add T2080RDB rev D support Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.1623327658.git.camelia.groza@nxp.com \
    --to=camelia.groza@oss.nxp.com \
    --cc=Shengzhou.Liu@nxp.com \
    --cc=Zhiqiang.Hou@nxp.com \
    --cc=camelia.groza@nxp.com \
    --cc=priyanka.jain@nxp.com \
    --cc=u-boot@lists.denx.de \
    --cc=wd@denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.