[PATCH v15 00/13] Add support for Hikey 970 PCIe

[Mauro Carvalho Chehab <mchehab+huawei@kernel.org>]

Hi Lorenzo,

I split patch 09/10 from v13 into three patches, in order to have one logical
change per patch, adding a proper descriptio to each of them. The final
code didn change.

The pcie-kirin PCIe driver contains internally a PHY interface for
Kirin 960, but it misses support for Kirin 970. A new PHY driver
for it was added at drivers/phy/hisilicon/phy-hi3670-pcie.c
(already merged via PHY tree).

Add support for Kirin 970 PHY driver at the pcie-kirin.c.

While here, also add the needed logic to compile it as module and
to allow to dynamically remove the driver in runtime.

Tested on HiKey970:

  # lspci -D -PP
  0000:00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3670 (rev 01)
  0000:00:00.0/01:00.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
  0000:00:00.0/01:00.0/02:01.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
  0000:00:00.0/01:00.0/02:04.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
  0000:00:00.0/01:00.0/02:05.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
  0000:00:00.0/01:00.0/02:07.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
  0000:00:00.0/01:00.0/02:09.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
  0000:00:00.0/01:00.0/02:01.0/03:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd Device a809
  0000:00:00.0/01:00.0/02:07.0/06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07)

Tested on HiKey960:

  # lspci -D 
  0000:00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3660 (rev 01)

---

v15:
  - The power-off fix patch was split into 3, in order to have one logical change
    per patch.
  -  Removed Fixes: tag from the poweroff patch;
  - Adjusted capitalization of two patch summary lines
  - No functional changes. The diff of this series is identical to v14.

v14:
  - Split a timeout logic from patch 4, placing it on a separate patch;
  - Added fixes: and cc: tags to the power_off fixup patch;
  - change a typecast from of_data to long, in order to avoid a warning on
    some randconfigs;
  - removed uneeded brackets at the power_off patch;
  - reordered struct device pointers at kirin_pcie_get_resource();
  - added a c/c to kishon at the PHY-related patches.

v13:
  - Added Xiaowei's ack for the series.

v12:
  - Change a comment at patch 1 to not use c99 style.

v11:
  - patch 5 changed to use the right PCIe topology
  - all other patches are identical to v10.

v10:
  - patch 1: dropped magic numbers from PHY driver
  - patch 5: allow pcie child nodes without reset-gpios
  - all other patches are identical to v9.

v9:
  - Did some cleanups at patches 1 and 5

Mauro Carvalho Chehab (13):
  PCI: kirin: Reorganize the PHY logic inside the driver
  PCI: kirin: Add support for a PHY layer
  PCI: kirin: Use regmap for APB registers
  PCI: kirin: Add support for bridge slot DT schema
  PCI: kirin: Give more time for PERST# reset to finish
  PCI: kirin: Add Kirin 970 compatible
  PCI: kirin: Add MODULE_* macros
  PCI: kirin: Allow building it as a module
  PCI: kirin: Add power_off support for Kirin 960 PHY
  PCI: kirin: Move the power-off code to a common routine
  PCI: kirin: Disable clkreq during poweroff sequence
  PCI: kirin: De-init the dwc driver
  PCI: kirin: Allow removing the driver

 drivers/pci/controller/dwc/Kconfig      |   2 +-
 drivers/pci/controller/dwc/pcie-kirin.c | 643 ++++++++++++++++++------
 2 files changed, 497 insertions(+), 148 deletions(-)

-- 
2.31.1