From: Michal Simek <michal.simek@amd.com>
To: <linux-kernel@vger.kernel.org>, <monstr@monstr.eu>,
<michal.simek@xilinx.com>, <git@xilinx.com>
Cc: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>,
Andrew Davis <afd@ti.com>,
Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>,
Conor Dooley <conor+dt@kernel.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
"Harini Katakam" <harini.katakam@amd.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Michael Grzeschik <m.grzeschik@pengutronix.de>,
Parth Gajjar <parth.gajjar@amd.com>,
"Piyush Mehta" <piyush.mehta@xilinx.com>,
Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>,
Rob Herring <robh+dt@kernel.org>,
"Robert Hancock" <robert.hancock@calian.com>,
Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>,
Srinivas Neeli <srinivas.neeli@xilinx.com>,
Tanmay Shah <tanmay.shah@amd.com>,
Vishal Sagar <vishal.sagar@amd.com>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v2 0/6] arm64: zynqmp: Misc zynqmp changes
Date: Mon, 22 May 2023 16:59:47 +0200 [thread overview]
Message-ID: <cover.1684767562.git.michal.simek@amd.com> (raw)
Hi,
the series is syncing the latest dt changes based on board status and the
latest DT schema.
The patches are based on
https://lore.kernel.org/all/20230321070619.29440-1-parth.gajjar@amd.com/
I have applied patches which were reviewed already to have smaller series.
Patches can be found https://github.com/Xilinx/linux-xlnx/tree/zynqmp/dt
Or they are in Linux-next already.
v1 is at
https://lore.kernel.org/r/7d034b9e-e4e6-5d72-8b37-78e25918aa59@amd.com.
Thanks,
Michal
Changes in v2:
- fix typo in commit message
- Update commit message to skip spi-nor part - reported by Laurent
- Update commit message to remove Linux part - reported by Laurent
- Update commit message to remove OS content - reported by Laurent
Amit Kumar Mahapatra (1):
arm64: zynqmp: Set qspi tx-buswidth to 4
Ashok Reddy Soma (1):
arm64: zynqmp: Fix usb node drive strength and slew rate
Michal Simek (2):
arm64: zynqmp: Describe TI phy as ethernet-phy-id
arm64: zynqmp: Used fixed-partitions for QSPI in k26
Radhey Shyam Pandey (2):
arm64: zynqmp: Add L2 cache nodes
arm64: zynqmp: Add pmu interrupt-affinity
.../boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso | 8 +-
.../boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso | 8 +-
.../boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 171 +++++++++---------
.../boot/dts/xilinx/zynqmp-zc1232-revA.dts | 2 +-
.../boot/dts/xilinx/zynqmp-zc1254-revA.dts | 2 +-
.../dts/xilinx/zynqmp-zc1751-xm015-dc1.dts | 10 +-
.../dts/xilinx/zynqmp-zc1751-xm016-dc2.dts | 8 +-
.../dts/xilinx/zynqmp-zc1751-xm018-dc4.dts | 2 +-
.../boot/dts/xilinx/zynqmp-zcu100-revC.dts | 13 +-
.../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 30 ++-
.../boot/dts/xilinx/zynqmp-zcu102-revB.dts | 25 ++-
.../boot/dts/xilinx/zynqmp-zcu104-revA.dts | 30 ++-
.../boot/dts/xilinx/zynqmp-zcu104-revC.dts | 30 ++-
.../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 29 ++-
.../boot/dts/xilinx/zynqmp-zcu111-revA.dts | 29 ++-
.../boot/dts/xilinx/zynqmp-zcu1275-revA.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 13 ++
17 files changed, 256 insertions(+), 156 deletions(-)
--
2.36.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Michal Simek <michal.simek@amd.com>
To: <linux-kernel@vger.kernel.org>, <monstr@monstr.eu>,
<michal.simek@xilinx.com>, <git@xilinx.com>
Cc: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>,
Andrew Davis <afd@ti.com>,
Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>,
Conor Dooley <conor+dt@kernel.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
"Harini Katakam" <harini.katakam@amd.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Michael Grzeschik <m.grzeschik@pengutronix.de>,
Parth Gajjar <parth.gajjar@amd.com>,
"Piyush Mehta" <piyush.mehta@xilinx.com>,
Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>,
Rob Herring <robh+dt@kernel.org>,
"Robert Hancock" <robert.hancock@calian.com>,
Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>,
Srinivas Neeli <srinivas.neeli@xilinx.com>,
Tanmay Shah <tanmay.shah@amd.com>,
Vishal Sagar <vishal.sagar@amd.com>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v2 0/6] arm64: zynqmp: Misc zynqmp changes
Date: Mon, 22 May 2023 16:59:47 +0200 [thread overview]
Message-ID: <cover.1684767562.git.michal.simek@amd.com> (raw)
Hi,
the series is syncing the latest dt changes based on board status and the
latest DT schema.
The patches are based on
https://lore.kernel.org/all/20230321070619.29440-1-parth.gajjar@amd.com/
I have applied patches which were reviewed already to have smaller series.
Patches can be found https://github.com/Xilinx/linux-xlnx/tree/zynqmp/dt
Or they are in Linux-next already.
v1 is at
https://lore.kernel.org/r/7d034b9e-e4e6-5d72-8b37-78e25918aa59@amd.com.
Thanks,
Michal
Changes in v2:
- fix typo in commit message
- Update commit message to skip spi-nor part - reported by Laurent
- Update commit message to remove Linux part - reported by Laurent
- Update commit message to remove OS content - reported by Laurent
Amit Kumar Mahapatra (1):
arm64: zynqmp: Set qspi tx-buswidth to 4
Ashok Reddy Soma (1):
arm64: zynqmp: Fix usb node drive strength and slew rate
Michal Simek (2):
arm64: zynqmp: Describe TI phy as ethernet-phy-id
arm64: zynqmp: Used fixed-partitions for QSPI in k26
Radhey Shyam Pandey (2):
arm64: zynqmp: Add L2 cache nodes
arm64: zynqmp: Add pmu interrupt-affinity
.../boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso | 8 +-
.../boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso | 8 +-
.../boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 171 +++++++++---------
.../boot/dts/xilinx/zynqmp-zc1232-revA.dts | 2 +-
.../boot/dts/xilinx/zynqmp-zc1254-revA.dts | 2 +-
.../dts/xilinx/zynqmp-zc1751-xm015-dc1.dts | 10 +-
.../dts/xilinx/zynqmp-zc1751-xm016-dc2.dts | 8 +-
.../dts/xilinx/zynqmp-zc1751-xm018-dc4.dts | 2 +-
.../boot/dts/xilinx/zynqmp-zcu100-revC.dts | 13 +-
.../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 30 ++-
.../boot/dts/xilinx/zynqmp-zcu102-revB.dts | 25 ++-
.../boot/dts/xilinx/zynqmp-zcu104-revA.dts | 30 ++-
.../boot/dts/xilinx/zynqmp-zcu104-revC.dts | 30 ++-
.../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 29 ++-
.../boot/dts/xilinx/zynqmp-zcu111-revA.dts | 29 ++-
.../boot/dts/xilinx/zynqmp-zcu1275-revA.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 13 ++
17 files changed, 256 insertions(+), 156 deletions(-)
--
2.36.1
next reply other threads:[~2023-05-22 15:00 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-22 14:59 Michal Simek [this message]
2023-05-22 14:59 ` [PATCH v2 0/6] arm64: zynqmp: Misc zynqmp changes Michal Simek
2023-05-22 14:59 ` [PATCH v2 1/6] arm64: zynqmp: Describe TI phy as ethernet-phy-id Michal Simek
2023-05-22 14:59 ` Michal Simek
2023-06-05 11:15 ` Michal Simek
2023-06-05 11:15 ` Michal Simek
2023-05-22 14:59 ` [PATCH v2 2/6] arm64: zynqmp: Fix usb node drive strength and slew rate Michal Simek
2023-05-22 14:59 ` Michal Simek
2023-06-05 11:15 ` Michal Simek
2023-06-05 11:15 ` Michal Simek
2023-05-22 14:59 ` [PATCH v2 3/6] arm64: zynqmp: Set qspi tx-buswidth to 4 Michal Simek
2023-05-22 14:59 ` Michal Simek
2023-06-05 11:16 ` Michal Simek
2023-06-05 11:16 ` Michal Simek
2023-05-22 14:59 ` [PATCH v2 4/6] arm64: zynqmp: Add L2 cache nodes Michal Simek
2023-05-22 14:59 ` Michal Simek
2023-05-23 7:48 ` Michal Simek
2023-05-23 7:48 ` Michal Simek
2023-05-22 14:59 ` [PATCH v2 5/6] arm64: zynqmp: Add pmu interrupt-affinity Michal Simek
2023-05-22 14:59 ` Michal Simek
2023-06-05 11:16 ` Michal Simek
2023-06-05 11:16 ` Michal Simek
2023-05-22 14:59 ` [PATCH v2 6/6] arm64: zynqmp: Used fixed-partitions for QSPI in k26 Michal Simek
2023-05-22 14:59 ` Michal Simek
2023-06-05 11:16 ` Michal Simek
2023-06-05 11:16 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1684767562.git.michal.simek@amd.com \
--to=michal.simek@amd.com \
--cc=afd@ti.com \
--cc=amit.kumar-mahapatra@xilinx.com \
--cc=ashok.reddy.soma@xilinx.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=git@xilinx.com \
--cc=harini.katakam@amd.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lakshmi.sai.krishna.potthuri@xilinx.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m.grzeschik@pengutronix.de \
--cc=michal.simek@xilinx.com \
--cc=monstr@monstr.eu \
--cc=parth.gajjar@amd.com \
--cc=piyush.mehta@xilinx.com \
--cc=radhey.shyam.pandey@amd.com \
--cc=robert.hancock@calian.com \
--cc=robh+dt@kernel.org \
--cc=srinivas.neeli@xilinx.com \
--cc=tanmay.shah@amd.com \
--cc=vishal.sagar@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.