All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yanteng Si <siyanteng@loongson.cn>
To: andrew@lunn.ch, hkallweit1@gmail.com, peppe.cavallaro@st.com,
	alexandre.torgue@foss.st.com, joabreu@synopsys.com
Cc: Yanteng Si <siyanteng@loongson.cn>,
	fancer.lancer@gmail.com, Jose.Abreu@synopsys.com,
	chenhuacai@loongson.cn, linux@armlinux.org.uk,
	guyinggang@loongson.cn, netdev@vger.kernel.org,
	loongarch@lists.linux.dev, chris.chenfeiyang@gmail.com
Subject: [PATCH v6 0/9] stmmac: Add Loongson platform support
Date: Wed, 13 Dec 2023 18:12:22 +0800	[thread overview]
Message-ID: <cover.1702458672.git.siyanteng@loongson.cn> (raw)

v6:

* Refer to Serge's suggestion:
  - Add new platform feature flag:
    include/linux/stmmac.h:
    +#define STMMAC_FLAG_HAS_LGMAC			BIT(13)

  - Add the IRQs macros specific to the Loongson Multi-channels GMAC:
     drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h:
     +#define DMA_INTR_ENA_NIE_LOONGSON 0x00060000	/* Normal Loongson Tx/Rx Summary */
     #define DMA_INTR_ENA_NIE 0x00010000	/* Normal Summary */
     ...

  - Drop all of redundant changes that don't require the
    prototypes being converted to accepting the stmmac_priv
    pointer.

* Refer to andrew's suggestion:
  - Drop white space changes.
  - break patch up into lots of smaller parts.
     Some small patches have been put into another series as a preparation
     see <https://lore.kernel.org/loongarch/cover.1702289232.git.siyanteng@loongson.cn/T/#t>
     
     *note* : This series of patches relies on the three small patches above.
* others
  - Drop irq_flags changes.
  - Changed patch order.



v4 -> v5:

* Remove an ugly and useless patch (fix channel number).
* Remove the non-standard dma64 driver code, and also remove
  the HWIF entries, since the associated custom callbacks no
  longer exist.
* Refer to Serge's suggestion: Update the dwmac1000_dma.c to
  support the multi-DMA-channels controller setup.

See:
v4: <https://lore.kernel.org/loongarch/cover.1692696115.git.chenfeiyang@loongson.cn/>
v3: <https://lore.kernel.org/loongarch/cover.1691047285.git.chenfeiyang@loongson.cn/>
v2: <https://lore.kernel.org/loongarch/cover.1690439335.git.chenfeiyang@loongson.cn/>
v1: <https://lore.kernel.org/loongarch/cover.1689215889.git.chenfeiyang@loongson.cn/>

Yanteng Si (9):
  net: stmmac: Pass stmmac_priv and chan in some callbacks
  net: stmmac: dwmac-loongson: Refactor code for loongson_dwmac_probe()
  net: stmmac: dwmac-loongson: Add full PCI support
  net: stmmac: Add multi-channel supports
  net: stmmac: Add Loongson-specific register definitions
  net: stmmac: dwmac-loongson: Add MSI support
  net: stmmac: dwmac-loongson: Add GNET support
  net: stmmac: dwmac-loongson: Disable flow control for GMAC
  net: stmmac: Disable coe for some Loongson GNET

 drivers/net/ethernet/stmicro/stmmac/common.h  |   1 +
 .../ethernet/stmicro/stmmac/dwmac-loongson.c  | 296 ++++++++++++++----
 .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c |   2 +-
 .../ethernet/stmicro/stmmac/dwmac1000_dma.c   |  61 +++-
 .../ethernet/stmicro/stmmac/dwmac100_dma.c    |   2 +-
 .../net/ethernet/stmicro/stmmac/dwmac4_dma.c  |   2 +-
 .../net/ethernet/stmicro/stmmac/dwmac_dma.h   |  47 ++-
 .../net/ethernet/stmicro/stmmac/dwmac_lib.c   |  65 ++--
 .../ethernet/stmicro/stmmac/dwxgmac2_dma.c    |   2 +-
 drivers/net/ethernet/stmicro/stmmac/hwif.c    |   8 +-
 drivers/net/ethernet/stmicro/stmmac/hwif.h    |  11 +-
 .../ethernet/stmicro/stmmac/stmmac_ethtool.c  |   6 +
 .../net/ethernet/stmicro/stmmac/stmmac_main.c |  13 +-
 include/linux/stmmac.h                        |   4 +
 14 files changed, 413 insertions(+), 107 deletions(-)

-- 
2.31.4


             reply	other threads:[~2023-12-13 10:12 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-13 10:12 Yanteng Si [this message]
2023-12-13 10:12 ` [PATCH v6 1/9] net: stmmac: Pass stmmac_priv and chan in some callbacks Yanteng Si
2023-12-16 13:01   ` Andrew Lunn
2023-12-18 10:09     ` Yanteng Si
2023-12-13 10:12 ` [PATCH v6 2/9] net: stmmac: dwmac-loongson: Refactor code for loongson_dwmac_probe() Yanteng Si
2023-12-13 10:12 ` [PATCH v6 3/9] net: stmmac: dwmac-loongson: Add full PCI support Yanteng Si
2023-12-13 10:14 ` [PATCH v6 4/9] net: stmmac: Add multi-channel supports Yanteng Si
2023-12-13 10:14 ` [PATCH v6 5/9] net: stmmac: Add Loongson-specific register definitions Yanteng Si
2023-12-16 15:47   ` Andrew Lunn
2023-12-18 10:22     ` Yanteng Si
2023-12-18 15:28       ` Andrew Lunn
2023-12-19 12:30         ` Yanteng Si
2023-12-13 10:14 ` [PATCH v6 6/9] net: stmmac: dwmac-loongson: Add MSI support Yanteng Si
2023-12-13 10:15 ` [PATCH v6 7/9] net: stmmac: dwmac-loongson: Add GNET support Yanteng Si
2023-12-13 10:15 ` [PATCH v6 8/9] net: stmmac: dwmac-loongson: Disable flow control for GMAC Yanteng Si
2023-12-13 10:15 ` [PATCH v6 9/9] net: stmmac: Disable coe for some Loongson GNET Yanteng Si
2023-12-14 15:15 ` [PATCH v6 0/9] stmmac: Add Loongson platform support Serge Semin
2023-12-19 12:35   ` Yanteng Si
2023-12-19 12:55     ` Serge Semin
2023-12-14 19:09 ` Jakub Kicinski
2023-12-14 19:09   ` Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.1702458672.git.siyanteng@loongson.cn \
    --to=siyanteng@loongson.cn \
    --cc=Jose.Abreu@synopsys.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew@lunn.ch \
    --cc=chenhuacai@loongson.cn \
    --cc=chris.chenfeiyang@gmail.com \
    --cc=fancer.lancer@gmail.com \
    --cc=guyinggang@loongson.cn \
    --cc=hkallweit1@gmail.com \
    --cc=joabreu@synopsys.com \
    --cc=linux@armlinux.org.uk \
    --cc=loongarch@lists.linux.dev \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.