[PATCH v2 0/3] AT91 Low Power Mode adjustments

[<Ryan.Wanner@microchip.com>]

From: Ryan Wanner <Ryan.Wanner@microchip.com>

This patch set adds the Low Power Mode pin feature to the SAMA7 SoCs.

Changes v1 -> v2:
- The 2.5v regulator has been removed as it has been applied.
- Adjust the dt-binding to allow more than 1 phandle.
- Adjust the commit message to explain better what the Low power mode
  pin does.
- Simplify the how the lpm pin property is parsed from the DT.

Claudiu Beznea (2):
  ARM: at91: PM: implement selection of LPM
  ARM: dts: at91: sama7g5ek: add microchip,lpm-connection on shdwc node

Varshini Rajendran (1):
  dt-bindings: power: reset: atmel,sama5d2-shdwc: add lpm binding

 .../power/reset/atmel,sama5d2-shdwc.yaml      | 19 ++++
 .../arm/boot/dts/microchip/at91-sama7g5ek.dts |  1 +
 arch/arm/mach-at91/pm.c                       | 96 ++++++++++++++++++-
 arch/arm/mach-at91/pm.h                       |  1 +
 arch/arm/mach-at91/pm_data-offsets.c          |  1 +
 arch/arm/mach-at91/pm_suspend.S               | 48 +++++++++-
 6 files changed, 158 insertions(+), 8 deletions(-)

-- 
2.43.0