From: <Ryan.Wanner@microchip.com>
To: <mturquette@baylibre.com>, <sboyd@kernel.org>,
<alexandre.belloni@bootlin.com>, <claudiu.beznea@tuxon.dev>,
<nicolas.ferre@microchip.com>
Cc: <linux-clk@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<varshini.rajendran@microchip.com>,
"Ryan Wanner" <Ryan.Wanner@microchip.com>
Subject: [PATCH v4 00/31] clk: at91: add support for parent_data and
Date: Thu, 18 Sep 2025 14:15:42 -0700 [thread overview]
Message-ID: <cover.1758226719.git.Ryan.Wanner@microchip.com> (raw)
From: Ryan Wanner <Ryan.Wanner@microchip.com>
This series adds support for parent data and parent _hw on the at91
clock drivers. This also updates all the SoC specific clock drivers to
use this format as well.
This is a continuation of the V1 of this series here [1].
This has been tested on the SAMA5* SoCs, the sam9x* SoCs, and the SAMA7*
SoCs.
Changes v1 -> V2:
- Remove all the small sama7g54 SoC driver changes and put them in their
own patch.
- Add the SAMA7D65 and the SAM9X75 to this update.
- Add a patch to move all common used macros into the pmc.h file.
- Update changes from v6.6 to v6.16.
- Remove patches that where style fixes and include those in the update.
Changes v2 -> v3:
- Adjust each patch so they are fully atomic.
- Add a patch to have the SAMA7D65 systemclocks use parent_data and
parent_hw.
- Add a formatting cleanup patch for the SAM9X75.
- Adjust commit messages that no longer show invalid information.
Changes v3 -> v4:
- Adjusted the AT91_CLK_PD macros to not use the index and use the name
and HW.
- Adjust the commit message for the sam9x7 to descibe the changes
better.
- Remove the usage of clock indexes and use of_clk_get_parent_name().
- Adjust commit messages to better describe the changes.
1) https://lore.kernel.org/all/20230727053156.13587-1-claudiu.beznea@tuxon.dev/
Claudiu Beznea (28):
clk: at91: pmc: add macros for clk_parent_data
clk: at91: clk-sam9x60-pll: use clk_parent_data
clk: at91: clk-peripheral: switch to clk_parent_data
clk: at91: clk-main: switch to clk parent data
clk: at91: clk-utmi: use clk_parent_data
clk: at91: clk-master: use clk_parent_data
clk: at91: clk-programmable: use clk_parent_data
clk: at91: clk-generated: use clk_parent_data
clk: at91: clk-usb: add support for clk_parent_data
clk: at91: clk-system: use clk_parent_data
clk: at91: clk-pll: add support for parent_hw
clk: at91: clk-audio-pll: add support for parent_hw
clk: at91: clk-plldiv: add support for parent_hw
clk: at91: clk-h32mx: add support for parent_hw
clk: at91: clk-i2s-mux: add support for parent_hw
clk: at91: clk-smd: add support for clk_parent_data
clk: at91: clk-slow: add support for parent_hw
clk: at91: dt-compat: switch to parent_hw and parent_data
clk: at91: sam9x60: switch to parent_hw and parent_data
clk: at91: sama5d2: switch to parent_hw and parent_data
clk: at91: sama5d3: switch to parent_hw and parent_data
clk: at91: sama5d4: switch to parent_hw and parent_data
clk: at91: at91sam9x5: switch to parent_hw and parent_data
clk: at91: at91rm9200: switch to parent_hw and parent_data
clk: at91: at91sam9260: switch to parent_hw and parent_data
clk: at91: at91sam9g45: switch to parent_hw and parent_data
clk: at91: at91sam9n12: switch to parent_hw and parent_data
clk: at91: at91sam9rl: switch to clk_parent_data
Ryan Wanner (3):
clk: at91: pmc: Move macro to header file
clk: at91: sam9x75: switch to parent_hw and parent_data
clk: at91: sama7d65: switch to parent_hw and parent_data
drivers/clk/at91/at91rm9200.c | 79 ++++---
drivers/clk/at91/at91sam9260.c | 120 ++++++-----
drivers/clk/at91/at91sam9g45.c | 73 ++++---
drivers/clk/at91/at91sam9n12.c | 90 ++++----
drivers/clk/at91/at91sam9rl.c | 49 +++--
drivers/clk/at91/at91sam9x5.c | 108 +++++-----
drivers/clk/at91/clk-audio-pll.c | 28 ++-
drivers/clk/at91/clk-generated.c | 8 +-
drivers/clk/at91/clk-h32mx.c | 11 +-
drivers/clk/at91/clk-i2s-mux.c | 6 +-
drivers/clk/at91/clk-main.c | 16 +-
drivers/clk/at91/clk-master.c | 24 +--
drivers/clk/at91/clk-peripheral.c | 16 +-
drivers/clk/at91/clk-pll.c | 9 +-
drivers/clk/at91/clk-plldiv.c | 11 +-
drivers/clk/at91/clk-programmable.c | 8 +-
drivers/clk/at91/clk-sam9x60-pll.c | 14 +-
drivers/clk/at91/clk-slow.c | 8 +-
drivers/clk/at91/clk-smd.c | 10 +-
drivers/clk/at91/clk-system.c | 8 +-
drivers/clk/at91/clk-usb.c | 41 ++--
drivers/clk/at91/clk-utmi.c | 16 +-
drivers/clk/at91/dt-compat.c | 80 ++++---
drivers/clk/at91/pmc.h | 68 +++---
drivers/clk/at91/sam9x60.c | 101 +++++----
drivers/clk/at91/sam9x7.c | 315 ++++++++++++++++------------
drivers/clk/at91/sama5d2.c | 157 +++++++-------
drivers/clk/at91/sama5d3.c | 112 +++++-----
drivers/clk/at91/sama5d4.c | 118 ++++++-----
drivers/clk/at91/sama7d65.c | 156 +++++++-------
drivers/clk/at91/sama7g5.c | 112 +++++-----
31 files changed, 1124 insertions(+), 848 deletions(-)
--
2.43.0
next reply other threads:[~2025-09-18 21:16 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-18 21:15 Ryan.Wanner [this message]
2025-09-18 21:15 ` [PATCH v4 01/31] clk: at91: pmc: add macros for clk_parent_data Ryan.Wanner
2025-10-20 19:40 ` Claudiu Beznea
2025-09-18 21:15 ` [PATCH v4 02/31] clk: at91: pmc: Move macro to header file Ryan.Wanner
2025-09-18 21:15 ` [PATCH v4 03/31] clk: at91: sam9x75: switch to parent_hw and parent_data Ryan.Wanner
2025-10-20 19:38 ` Claudiu Beznea
2025-09-18 21:15 ` [PATCH v4 04/31] clk: at91: clk-sam9x60-pll: use clk_parent_data Ryan.Wanner
2025-10-20 19:41 ` Claudiu Beznea
2025-09-18 21:15 ` [PATCH v4 05/31] clk: at91: clk-peripheral: switch to clk_parent_data Ryan.Wanner
2025-10-20 19:41 ` Claudiu Beznea
2025-09-18 21:15 ` [PATCH v4 06/31] clk: at91: clk-main: switch to clk parent data Ryan.Wanner
2025-10-20 19:42 ` Claudiu Beznea
2025-09-18 21:15 ` [PATCH v4 07/31] clk: at91: clk-utmi: use clk_parent_data Ryan.Wanner
2025-09-19 11:33 ` kernel test robot
2025-10-20 19:43 ` Claudiu Beznea
2025-09-18 21:15 ` [PATCH v4 08/31] clk: at91: clk-master: " Ryan.Wanner
2025-10-20 19:44 ` Claudiu Beznea
2025-09-18 21:15 ` [PATCH v4 09/31] clk: at91: clk-programmable: " Ryan.Wanner
2025-09-18 21:15 ` [PATCH v4 10/31] clk: at91: clk-generated: " Ryan.Wanner
2025-10-20 19:39 ` Claudiu Beznea
2025-10-20 19:45 ` Claudiu Beznea
2025-09-18 21:15 ` [PATCH v4 11/31] clk: at91: clk-usb: add support for clk_parent_data Ryan.Wanner
2025-10-20 19:17 ` Claudiu Beznea
2025-12-18 16:23 ` Ryan.Wanner
2025-12-23 14:00 ` claudiu beznea
2026-01-05 17:58 ` Ryan.Wanner
2026-01-10 15:03 ` Claudiu Beznea
2026-01-12 21:25 ` Ryan Wanner
2026-01-16 6:57 ` claudiu beznea
2025-09-18 21:15 ` [PATCH v4 12/31] clk: at91: clk-system: use clk_parent_data Ryan.Wanner
2025-09-18 21:15 ` [PATCH v4 13/31] clk: at91: sama7d65: switch to parent_hw and parent_data Ryan.Wanner
2025-10-20 19:14 ` Claudiu Beznea
2025-09-18 21:15 ` [PATCH v4 14/31] clk: at91: clk-pll: add support for parent_hw Ryan.Wanner
2025-09-18 21:15 ` [PATCH v4 15/31] clk: at91: clk-audio-pll: " Ryan.Wanner
2025-09-18 21:15 ` [PATCH v4 16/31] clk: at91: clk-plldiv: " Ryan.Wanner
2025-10-20 19:12 ` Claudiu Beznea
2025-09-18 21:15 ` [PATCH v4 17/31] clk: at91: clk-h32mx: " Ryan.Wanner
2025-10-20 19:12 ` Claudiu Beznea
2025-09-18 21:16 ` [PATCH v4 18/31] clk: at91: clk-i2s-mux: " Ryan.Wanner
2025-10-20 19:13 ` Claudiu Beznea
2025-09-18 21:16 ` [PATCH v4 19/31] clk: at91: clk-smd: add support for clk_parent_data Ryan.Wanner
2025-10-20 19:14 ` Claudiu Beznea
2025-09-18 21:16 ` [PATCH v4 20/31] clk: at91: clk-slow: add support for parent_hw Ryan.Wanner
2025-10-20 19:17 ` Claudiu Beznea
2025-09-18 21:16 ` [PATCH v4 21/31] clk: at91: dt-compat: switch to parent_hw and parent_data Ryan.Wanner
2025-10-20 19:15 ` Claudiu Beznea
2026-01-09 17:03 ` Ryan Wanner
2026-01-10 15:07 ` Claudiu Beznea
2025-09-18 21:16 ` [PATCH v4 22/31] clk: at91: sam9x60: " Ryan.Wanner
2025-09-18 21:16 ` [PATCH v4 23/31] clk: at91: sama5d2: " Ryan.Wanner
2025-10-20 19:19 ` Claudiu Beznea
2025-09-18 21:16 ` [PATCH v4 24/31] clk: at91: sama5d3: " Ryan.Wanner
2025-09-18 21:16 ` [PATCH v4 25/31] clk: at91: sama5d4: " Ryan.Wanner
2025-09-19 14:42 ` kernel test robot
2025-09-18 21:16 ` [PATCH v4 26/31] clk: at91: at91sam9x5: " Ryan.Wanner
2025-10-20 19:19 ` Claudiu Beznea
2025-09-18 21:16 ` [PATCH v4 27/31] clk: at91: at91rm9200: " Ryan.Wanner
2025-09-18 21:16 ` [PATCH v4 28/31] clk: at91: at91sam9260: " Ryan.Wanner
2025-10-20 19:35 ` Claudiu Beznea
2025-09-18 21:16 ` [PATCH v4 29/31] clk: at91: at91sam9g45: " Ryan.Wanner
2025-09-18 21:16 ` [PATCH v4 30/31] clk: at91: at91sam9n12: " Ryan.Wanner
2025-09-18 21:16 ` [PATCH v4 31/31] clk: at91: at91sam9rl: switch to clk_parent_data Ryan.Wanner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1758226719.git.Ryan.Wanner@microchip.com \
--to=ryan.wanner@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=nicolas.ferre@microchip.com \
--cc=sboyd@kernel.org \
--cc=varshini.rajendran@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.