[PATCH v8 0/2] arm64: dts: intel: agilex5: enable USB3.1 on SoCDK

[Adrian Ng Ho Yin <adrian.ho.yin.ng@altera.com>]

Add the Agilex5 USB3.1 DWC3 controller node and enable it in host mode on
the SoCDK board. Place the controller under a simple-bus with a 40-bit
dma-ranges window so the DMA/IOMMU stack respects the interconnect address
width when SMMU is enabled.

The SoCDK daughter card only exposes the USB3.1 interface, so the unused
USB0 (DWC2) board enablement is removed in a follow-up patch.

This DTS series is posted separately from the USB bindings/driver series
("[PATCH v7 0/2] usb: dwc3: add Altera Agilex5 DWC3 support"). Depends on
compatible "altr,agilex5-dwc3" from that series.

---
changelog:
v7->v8:
* Rename simple-bus wrapper node from usb-bus@11000000 to bus@11000000
  (Krzysztof Kozlowski). Use an approved simple-bus node name; do not
  invent usb-bus.

v6->v7:
* Split out of the USB series into a standalone DTS posting.

Previous DTS series (v7):
https://lore.kernel.org/all/cover.1789114403.git.adrian.ho.yin.ng@altera.com/

Previous combined series (v6):
https://lore.kernel.org/all/cover.1788886615.git.adrian.ho.yin.ng@altera.com/
---

Adrian Ng Ho Yin (2):
  arm64: dts: intel: agilex5: add USB3.1 controller node
  arm64: dts: intel: agilex5: remove usb0 in Agilex5 SoCDK

 .../arm64/boot/dts/intel/socfpga_agilex5.dtsi | 35 +++++++++++++++++++
 .../boot/dts/intel/socfpga_agilex5_socdk.dts  |  4 +--
 2 files changed, 37 insertions(+), 2 deletions(-)


base-commit: 93f51579e7df248780214094418f205253383cc5
-- 
2.49.GIT