From: Geert Uytterhoeven <geert+renesas@glider.be>
To: soc@lists.linux.dev, soc <soc@kernel.org>
Cc: Magnus Damm <magnus.damm@gmail.com>,
linux-arm-kernel@lists.infradead.org,
linux-renesas-soc@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [GIT PULL 2/2] Renesas DTS updates for v7.4 (take two)
Date: Fri, 2 Oct 2026 13:28:40 +0200 [thread overview]
Message-ID: <cover.1790939715.git.geert+renesas@glider.be> (raw)
In-Reply-To: <cover.1790939711.git.geert+renesas@glider.be>
The following changes since commit b43aa6a6ebe8ca8bdd75ee688e1eb2d0d16a888e:
arm64: dts: renesas: r8a779f0: Add GICv3 ITS and update PCIe nodes (2026-09-15 10:46:16 +0200)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git tags/renesas-dts-for-v7.4-tag2
for you to fetch changes up to d99e991749f3b12a3a8b23224725dbc1ca15f6bf:
arm64: dts: renesas: Add support for solidrun rzg2ul som on hb-ripple (2026-10-02 11:59:02 +0200)
----------------------------------------------------------------
Renesas DTS updates for v7.4 (take two)
- Add PCIe support for the RZ/G3L SoC,
- Add ADC DMA support for the RZ/T2H and RZ/N2H SoCs,
- Add initial support for the RZ/G2M v3.0 SoC and the HopeRun HiHope
RZ/G2M v3.0 board stack,
- Add USB support for the RZ/G3E SoC and the RZ/G3E SMARC EVK board,
- Add SPI (MSIOF) and I2C support for the R-Car X5H SoC,
- Add support for various SolidRun boards based on RZ/G2L, RZ/G2LC,
RZ/V2L, and RZ/G2UL,
- Miscellaneous fixes and improvements.
Note that this includes DT binding definitions and updates for the
RZ/G2M v3.0 and R-Car X5H SoCs, which are shared by the clock and
pmdomain subsystems and DT source files.
Thanks for pulling!
----------------------------------------------------------------
Anurag Pateriya (1):
dt-bindings: power: qcom,rpmhpd: Add NMXC power domain index
Ayman Chaudhry (6):
dt-bindings: power: renesas,rcar-sysc: Document vendor-prefixed header paths
dt-bindings: power: Add r8a774a3 SYSC power domain definitions
dt-bindings: clock: Add r8a774a3 CPG Core Clock definitions
arm64: dts: renesas: Add initial SoC DTSI for RZ/G2M v3.0
arm64: dts: renesas: Add HiHope RZ/G2M v3.0 SoC main board support
arm64: dts: renesas: Add HiHope RZ/G2M v3.0 SoC sub board support
Biju Das (1):
arm64: dts: renesas: r9a08g046: Add PCIe support
Cosmin Tanislav (2):
arm64: dts: renesas: r9a09g077: Wire up DMA support for ADC
arm64: dts: renesas: r9a09g087: Wire up DMA support for ADC
Geert Uytterhoeven (5):
Merge tag 'renesas-r8a774a3-dt-binding-defs-tag1' into renesas-dts-for-v7.4
Merge branch 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm into renesas-dts-for-v7.4
dt-bindings: clock: renesas,r8a78000-cpg: Add MSIOF clocks
Merge tag 'renesas-r8a78000-dt-binding-defs-tag3' into renesas-dts-for-v7.4
arm64: dts: renesas: r8a78000: Add MSIOF nodes
Hardeep Sharma (1):
dt-bindings: power: rpmpd: Document Kuno RPMh power domains
Joshua Yeong (1):
dt-bindings: power: Add RPMI device power service
Josua Mayer (9):
dt-bindings: soc: renesas: Add various SolidRun RZ/G2 based boards
arm64: dts: renesas: Add support for solidrun rzg2l som and hb-iiot evb
arm64: dts: renesas: Add support for solidrun rzv2l som and hb-iiot evb
arm64: dts: renesas: Add support for solidrun rzg2lc som and hb-iiot evb
arm64: dts: renesas: rzg2l(c)/rzv2l hb-iiot: Add dsi panel dt overlay
arm64: dts: renesas: Add support for solidrun hb-ripple with rzg2l som
arm64: dts: renesas: Add support for solidrun hb-ripple with rzv2l som
arm64: dts: renesas: Add support for solidrun hb-ripple with rzg2lc som
arm64: dts: renesas: Add support for solidrun rzg2ul som on hb-ripple
Lad Prabhakar (2):
arm64: dts: renesas: r9a09g077: Drop unwired ADC interrupts
arm64: dts: renesas: r9a09g087: Drop unwired ADC interrupts
Marek Vasut (4):
arm64: dts: renesas: ironhide: Align inline ECC carveout sizes with bootloader settings
arm64: dts: renesas: r8a779f0: Add PCIe Application/Local register reset
arm64: dts: renesas: r8a779g0: Add PCIe Application/Local register reset
arm64: dts: renesas: r8a779h0: Add PCIe Application/Local register reset
Sreeshankar K (1):
dt-bindings: power: qcom,rpmhpd: Document RPMh power domain for SM7250
Tommaso Merciai (3):
arm64: dts: renesas: r9a08g046: Add USB2.0 placeholder nodes
arm64: dts: renesas: r9a09g047: Add USB2.0 support
arm64: dts: renesas: r9a09g047e57-smarc: Enable USB2.0 support
Wolfram Sang (1):
arm64: dts: renesas: r8a78000: Add I2C nodes
.../devicetree/bindings/power/qcom,rpmpd.yaml | 2 +
.../bindings/power/renesas,rcar-sysc.yaml | 7 +-
.../bindings/power/riscv,rpmi-device-power.yaml | 65 +++
.../power/riscv,rpmi-mpxy-device-power.yaml | 65 +++
.../devicetree/bindings/soc/renesas/renesas.yaml | 37 ++
arch/arm64/boot/dts/renesas/Makefile | 76 ++-
.../boot/dts/renesas/r8a774a3-hihope-rzg2m-ex.dts | 14 +
.../boot/dts/renesas/r8a774a3-hihope-rzg2m.dts | 49 ++
arch/arm64/boot/dts/renesas/r8a774a3.dtsi | 302 +++++++++++
arch/arm64/boot/dts/renesas/r8a779f0.dtsi | 16 +-
arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 16 +-
arch/arm64/boot/dts/renesas/r8a779h0.dtsi | 8 +-
arch/arm64/boot/dts/renesas/r8a78000-ironhide.dts | 12 +-
arch/arm64/boot/dts/renesas/r8a78000.dtsi | 216 ++++++++
.../renesas/r9a07g043u12-hummingboard-ripple.dts | 89 ++++
.../dts/renesas/r9a07g044c2-hummingboard-iiot.dts | 20 +
.../renesas/r9a07g044c2-hummingboard-ripple.dts | 93 ++++
.../dts/renesas/r9a07g044l2-hummingboard-iiot.dts | 16 +
.../renesas/r9a07g044l2-hummingboard-ripple.dts | 18 +
.../dts/renesas/r9a07g054l2-hummingboard-iiot.dts | 16 +
.../renesas/r9a07g054l2-hummingboard-ripple.dts | 18 +
arch/arm64/boot/dts/renesas/r9a08g046.dtsi | 70 ++-
arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts | 36 ++
arch/arm64/boot/dts/renesas/r9a09g047.dtsi | 124 +++++
arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts | 31 ++
arch/arm64/boot/dts/renesas/r9a09g077.dtsi | 24 +-
arch/arm64/boot/dts/renesas/r9a09g087.dtsi | 24 +-
arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi | 25 +
.../renesas/rzg2l-hummingboard-iiot-common.dtsi | 560 +++++++++++++++++++++
.../renesas/rzg2l-hummingboard-iiot-microsd.dtso | 26 +
...hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtso | 79 +++
.../renesas/rzg2l-hummingboard-iiot-rs485-a.dtso | 17 +
.../renesas/rzg2l-hummingboard-iiot-rs485-b.dtso | 17 +
.../boot/dts/renesas/rzg2l-hummingboard-iiot.dtsi | 49 ++
.../renesas/rzg2l-hummingboard-pulse-common.dtsi | 116 +++++
.../rzg2l-hummingboard-pulse-micro-hdmi.dtsi | 79 +++
.../dts/renesas/rzg2l-hummingboard-ripple.dtsi | 122 +++++
arch/arm64/boot/dts/renesas/rzg2l-sr-som-emmc.dtso | 44 ++
arch/arm64/boot/dts/renesas/rzg2l-sr-som.dtsi | 473 +++++++++++++++++
.../renesas/rzg2lc-hummingboard-pulse-leds.dtso | 48 ++
arch/arm64/boot/dts/renesas/rzg2lc-sr-som.dtsi | 436 ++++++++++++++++
.../renesas/rzg2ul-hummingboard-pulse-leds.dtso | 48 ++
arch/arm64/boot/dts/renesas/rzg2ul-sr-som.dtsi | 418 +++++++++++++++
arch/arm64/boot/dts/renesas/rzg3l-smarc-som.dtsi | 11 +
.../dt-bindings/clock/renesas,r8a774a3-cpg-mssr.h | 59 +++
include/dt-bindings/clock/renesas,r8a78000-cpg.h | 2 +
include/dt-bindings/power/qcom,rpmhpd.h | 1 +
include/dt-bindings/power/renesas,r8a774a3-sysc.h | 30 ++
48 files changed, 4069 insertions(+), 55 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power/riscv,rpmi-device-power.yaml
create mode 100644 Documentation/devicetree/bindings/power/riscv,rpmi-mpxy-device-power.yaml
create mode 100644 arch/arm64/boot/dts/renesas/r8a774a3-hihope-rzg2m-ex.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a774a3-hihope-rzg2m.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a774a3.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/r9a07g043u12-hummingboard-ripple.dts
create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044c2-hummingboard-iiot.dts
create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044c2-hummingboard-ripple.dts
create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044l2-hummingboard-iiot.dts
create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044l2-hummingboard-ripple.dts
create mode 100644 arch/arm64/boot/dts/renesas/r9a07g054l2-hummingboard-iiot.dts
create mode 100644 arch/arm64/boot/dts/renesas/r9a07g054l2-hummingboard-ripple.dts
create mode 100644 arch/arm64/boot/dts/renesas/rzg2l-hummingboard-iiot-common.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/rzg2l-hummingboard-iiot-microsd.dtso
create mode 100644 arch/arm64/boot/dts/renesas/rzg2l-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtso
create mode 100644 arch/arm64/boot/dts/renesas/rzg2l-hummingboard-iiot-rs485-a.dtso
create mode 100644 arch/arm64/boot/dts/renesas/rzg2l-hummingboard-iiot-rs485-b.dtso
create mode 100644 arch/arm64/boot/dts/renesas/rzg2l-hummingboard-iiot.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/rzg2l-hummingboard-pulse-common.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/rzg2l-hummingboard-pulse-micro-hdmi.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/rzg2l-hummingboard-ripple.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/rzg2l-sr-som-emmc.dtso
create mode 100644 arch/arm64/boot/dts/renesas/rzg2l-sr-som.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/rzg2lc-hummingboard-pulse-leds.dtso
create mode 100644 arch/arm64/boot/dts/renesas/rzg2lc-sr-som.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/rzg2ul-hummingboard-pulse-leds.dtso
create mode 100644 arch/arm64/boot/dts/renesas/rzg2ul-sr-som.dtsi
create mode 100644 include/dt-bindings/clock/renesas,r8a774a3-cpg-mssr.h
create mode 100644 include/dt-bindings/power/renesas,r8a774a3-sysc.h
next prev parent reply other threads:[~2026-10-02 11:28 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-02 11:28 [GIT PULL 0/2] Renesas SoC updates for v7.4 (take two) Geert Uytterhoeven
2026-10-02 11:28 ` [GIT PULL 1/2] Renesas driver " Geert Uytterhoeven
2026-10-02 11:28 ` Geert Uytterhoeven [this message]
2026-10-13 16:10 ` [GIT PULL 0/2] Renesas SoC " patchwork-bot+linux-soc
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1790939715.git.geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=soc@kernel.org \
--cc=soc@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.