All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrei-Alexandru Bleortu <me@andrei-z.com>
To: Jeff Johnson <jjohnson@kernel.org>
Cc: <ath11k@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
	<linux-wireless@vger.kernel.org>
Subject: [PATCH ath-next 0/5] wifi: ath11k: WMI services debugfs and HE AP fixes
Date: Sun, 4 Oct 2026 14:18:02 +0300	[thread overview]
Message-ID: <cover.1791111135.2.git.me@andrei-z.com> (raw)

A debugfs file listing the firmware's WMI services, and fixes for an
ath11k HE AP found by checking it against IEEE Std 802.11-2024, each
tested on a QCN9074:

1. debugfs: wmi_services lists the services the firmware advertises.
   Earlier posted in the airtime fairness series, now split by tree;
   since v2 the commit message no longer claims to match ath10k's
   output.
2. Probe Responses during a channel switch carried the initial count:
   ath11k never counted down mac80211's CSA counter (as ath12k does).
3. Without spatial reuse parameters, an AP enabled non-SRG OBSS PD at
   -62 dBm; it now stays off, as in ath12k.
4. A 6 GHz AP never sent its per-20 MHz power limits to firmware (the
   TPC command was station only); it now does as an LPI AP, as in
   ath12k.
5. The hardware DSCP-TID tables used the class selector bits, while
   cfg80211 maps DSCP to UP per RFC 8325 section 4; checked on air
   through the firmware's per-TID peer statistics (CS1->1, AF21->3,
   EF->6, CS6->7).

None of them depends on the mac80211 series sent alongside.

The patches by me were written with an AI coding assistant (Claude
Code), which also drafted the changelogs; the testing described was done
on the hardware.

v2 of patch 1: https://lore.kernel.org/all/20261003155542.96363-2-me@andrei-z.com/

Andrei-Alexandru Bleortu (5):
  wifi: ath11k: add a debugfs file listing the firmware WMI services
  wifi: ath11k: count down channel switch announcements in mac80211
  wifi: ath11k: leave OBSS PD off when spatial reuse is not configured
  wifi: ath11k: set the 6 GHz transmit power limits of an AP
  wifi: ath11k: map DSCP to TID as cfg80211 does by default

 drivers/net/wireless/ath/ath11k/core.h    |  2 ++
 drivers/net/wireless/ath/ath11k/debugfs.c | 15 +++++++++++
 drivers/net/wireless/ath/ath11k/hal_tx.c  | 30 +++++++++++-----------
 drivers/net/wireless/ath/ath11k/mac.c     | 31 +++++++++++++++--------
 drivers/net/wireless/ath/ath11k/wmi.c     | 23 +++++++++++++----
 5 files changed, 71 insertions(+), 30 deletions(-)


base-commit: f49defea7668d8c68ec19fa085ef3da6075561c7
-- 
2.47.3



             reply	other threads:[~2026-10-04 11:18 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-04 11:18 Andrei-Alexandru Bleortu [this message]
2026-10-04 11:18 ` [PATCH ath-next 1/5] wifi: ath11k: add a debugfs file listing the firmware WMI services Andrei-Alexandru Bleortu
2026-10-04 11:18 ` [PATCH ath-next 2/5] wifi: ath11k: count down channel switch announcements in mac80211 Andrei-Alexandru Bleortu
2026-10-04 11:18 ` [PATCH ath-next 3/5] wifi: ath11k: leave OBSS PD off when spatial reuse is not configured Andrei-Alexandru Bleortu
2026-10-04 11:18 ` [PATCH ath-next 4/5] wifi: ath11k: set the 6 GHz transmit power limits of an AP Andrei-Alexandru Bleortu
2026-10-04 11:18 ` [PATCH ath-next 5/5] wifi: ath11k: map DSCP to TID as cfg80211 does by default Andrei-Alexandru Bleortu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.1791111135.2.git.me@andrei-z.com \
    --to=me@andrei-z.com \
    --cc=ath11k@lists.infradead.org \
    --cc=jjohnson@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.