From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: To: bluez-users@lists.sourceforge.net From: Mathis Message-ID: References: <1107118147.8384.12.camel@pegasus> <1107121540.8384.23.camel@pegasus> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed In-Reply-To: <1107121540.8384.23.camel@pegasus> Subject: [Bluez-users] Re: F8T001 version 1 and SuSE 9.2 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sun, 30 Jan 2005 23:42:17 +0100 Marcel Holtmann schrieb: > Hi, > > >>T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 >>D: Ver= 1.01 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 >>P: Vendor=0a5c ProdID=2033 Rev= 0.a0 >>C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA >>I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) >>E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms >>E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms >>E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms >>I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) >>E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms >>E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms >>I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) >>E: Ad=83(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms >>E: Ad=03(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms >>I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) >>E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms >>E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms >>I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) >>E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms >>E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms >>I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) >>E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms >>E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms >>I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) >>E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms >>E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms >>I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) >>E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms >>E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms > > > this is the Broadcom 2033 dongle that needs a firmware download before > it will work as H:2 dongle. You must install the bluez-firmware package > and make sure that the bcm203x kernel driver is loaded. You can also > call dmesg and check for an error message, because there must be one if > the firmware isn't found. > > Regards > > Marcel > > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting > Tool for open source databases. Create drag-&-drop reports. Save time > by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. > Download a FREE copy at http://www.intelliview.com/go/osdn_nl thanx, this information did help alot Mathis ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users